Cannot Access NAS200 under Win 7 after Syba SY-SER USB IP Servers installed.

I lost access to the NAS after installing a SYBA USB-IP Server.  This occurs on Windows 7 machines.  THere is no problem under Windows XP.  When I run the install utility, it finds the NAS and seems to complete normally.  After rebooting, it does not show up under My Computer.  It shows up as Storage under Network and if I click through that path, I can have access but still not under drive mapping/my computer.  All devices are on the same subnet - 169.254.243.xxx - with the NAS as 169.254.243.188.  Any suggestions?

On your Computers.... Click on Start - RUN - type "\\NAS200 IP\drive name" without quotes and hit enter....When prompted for the Username and Password...Type the Username and Password and click Ok...It will display you the NAS200 Shared Drives ... Right click on it and select "Map Network Drive" and below you need to check the Box "Re-Connect at Logon" and click on Finish...
This way you need to Map the Drivers on all the Computers.... And after this you will be able to Store your Data on NAS200.

Similar Messages

  • I cannot access my emails through Firefox after having system changed from Mac to PC. I have reset the password but no luck. I get 'reason=failure'. I cannot access from other computers either.

    I cannot access my emails from any work computer despite resetting password (original password unknown as before my time and had been 'remembered' in system so was always there).
    == This happened ==
    Every time Firefox opened
    == Logging on after work done to change systems. IT person now gone.

    Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
    Once you're there, the site will check if all your plugins have the latest versions.
    If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
    To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

  • Cannot access Linksys Wireless GUI Page after DHCP disabled.

    Ok funny situation I have here... I have another main wired router, and a Linksys WRT54GS Wireless Router. I want to use the Linksys as an access point since my smoothy has DHCP server enabled. So, I disabled DHCP on the linksys, set the router IP as 192.168.0.2 (my smoothy is 192.168.0.1). I also put the connection from the main router to the Linksys on the LAN ports, not WAN. I reset everything and my computers and everything works fine. The DHCP works properly from my main router, I get Internet etc. HOWEVER, I cannot access the Linksys GUI page when I go to 192.168.0.2...it just times out! Any ideas? I can access it if the DHCP is enabled on the linksys, but with it off I cannot. Thanks!

    try assigning a static ip add on the computer ( 192.168.1.3 ) .. connect it to the router and then try to access http://192.168.0.2

  • Cannot Access pre-repair TimeMachine files after config. new TM

    Hello all...really in a bind...
    My only backup is a Time Machine backup which wouldn't restore. While replacing files/folders individually manually (via finder), and then also through Time Machine (somehow became possible again), I decided to backup what I had so far (a few hours of work)...
    After backing up via Time Machine, I can no longer access the original files; I am told I 'do not have sufficient access privileges'.
    I noticed on the forum that there can be permissions problems with 10.5.6; I am debating either using disk utility to check the external HD the backup(s) are on, and/or doing a permissions change via Terminal (sudo chmod etc....) as recommended in another post (though I am a bit unclear about exactly how to do that)...Is there a better order? one or the other? some other way?
    Final complications: The older backups (under users) I want are in a folder on the external HD under { apple's macbook pro 15" }; this has a different user and password than my current computer configuration's backup, which is unfortunately called { Apple's macbook pro 15" } ... could this difference of only a capital A or lower case a be causing a problem? Is there a safe way to change it? Anyway to merge the new and old backups into a seamless 'timeline' where I can access the entire history at once?
    Any help really and truly appreciated...

    Sorry, but no, a new Mac is a new Mac, and you can't fool Time Machine into thinking otherwise.
    On the first backup, you should get the prompt in #B5 of [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum). As explained there, the new backups will be "appended" to the old ones, so you can still see and restore from them. But Time Machine will still do a full backup of the new Mac.

  • Cannot access my 8TB Lacei drive after Mavericks

    I just installed Mavericks and I cannot load my iPhoto and Lightroom 5 because I have no right to access my external hard drive.
    What happened?

    Is it coming up with something like this?
    Verifying volume “Maxtor 200”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Invalid key length
    The volume Maxtor 200 needs to be repaired.
    Volume check failed.
    Error: The underlying task reported failure on exit (-9972)
    1 volume checked
    0 HFS volumes verified
    1 volume failed verification
    If it is, the volume is corrupt.
    "The key referred to in the diagnosis is a means by which the disk directory refers to a file, and consists of the name of the file and the folder ID number of the folder containing it.
    A third-party disk repair utility may be able to fix this problem. As always, there must be sufficient relevant correct data in the directory to allow the damaged data to be reconstructed. "
    Quoted from: http://www.macfixitforums.com/php/showflat.php?Board=Forum39&Number=620836
    DiskWarrior will most probably be able to fix it for you though:
    http://www.alsoft.com/DiskWarrior/

  • HT4623 I cannot access appstore in my iPad after updating to iOS7. How can I access it? Pls.help

    i just updated my iPad to iOS7 but when I try to access appstore to dowload, I get message"cannot accesss appstore". I cannot even update the apps that shows need to updates and cannot download games. what am I gonna do to access my appstore. I never had this problem before the upgrade to iOS7

    - hard reset (hold power button and home button at same time until it resets with an apple on it)
    - reset all settings (settings, general, reset)
    - back up and restore (using an itunes on ur pc, make sure the itunes is updated)
    try those in order. they will fix ur issue

  • Cannot access disk in Time Capsule after updated to 7.4.1

    I have a macbook pro and a PC(MS Vista), both connect to the Time Capsule via LAN.
    After I updated the Airport Utility to 7.4.1 in PC several days ago, I could never access the disk in Time Capsule via PC, it always said "Unknown user, incorrect password, or login is disabled. Please retype the login information or contact the disk's administrator". However, everything is fine when I use macbook to access the disk.
    I tried to reset the password, tried to access with disk password or with accounts, but nothing worked.
    Whatever the password I changed to, it always show the same dialog.
    Thank you for your helping!

    I had the same problem.. Updating to 7.4.2 seems to have solved the problem, for me anyway. There seem to be a lot of posts about people noticing network slow downs. Can't say I have, but currently I can't access my printer attached to the USB port on my TC from my PC. My iMac can print to it no problem. Bought printer after update installed. If someone can point me in the right direction of solving that problem that would be great.
    Cheers

  • Cannot access iTunes store from iPad after most recent upgrade

    I can enter the app store and attempt to purchase. When I enter my password get message that it cannot connect to iTunes store. Have reset my password 5 times and still get the same thing. Any suggestions?

    Hi guys
    Is there any way we can get this to apple as I have just went to apple store and were stating iTunes is not associated with them
    I think this issue is only on iPad not on the iMac as I can access iTunes u.
    Could some from apple advise when iTunes u will be up for the iPad community
    I am from Sydney Australia it is world wide

  • Cannot Access Earlier Time Machine Backups After Upgrade To Mountain lion

    I went into Time Machine to recover some past emails. It shows that it had backed up my emails for the last year, however it will not let me recover anything before my upgrade to mountain lion. Does anyone know of a workaround for this problem. Thank you.

    Christopher Sant wrote:
    Once it does finally recognize (after a good while) it simply says "Error, time machine could not complete the backup"
    There should be more to that message.  See #C2 in Time Machine - Troubleshooting.  It will show you how to locate the message(s) that describe the problem, then help you fix it.    If that doesn't help, post back with details, including all the messages, your setup, what you've done, and the results.

  • AOL recently asked me to change password I did so on my PC but cannot access mail on iPad even after changing it in settings.  I even canceled and redid my AOL account.

    AOL recently asked me to change password.  I did so and on my PC everything is OK but I can't access mail on iPad.  I changed the password in settings and that didn't work.  I also canceled and re-entered my AOL account, also no luck.  Can anyone help me?

    Are you sure you have the right password?
    Did you try this; http://help.aol.com/help/microsites/search.do?cmd=displayKC&docType=kc&externalI d=68175

  • Cannot access one of my apps after downloading iSO7

    Since downloading iSO7 one of my apps will not allow me access - I put in my passcode and it returns to the app. This is very frustrating.  I went to the app store, and associated with this particular app is a cloud with a downward arrow.  I've no idea what this means.  Do I have to delete the app and reload?

    I think it means that an update is available.

  • Cannot access anything under Edit/Prefrences.

    using HP Pavilion DV7 Notebook.  Intell dual core 2.13GHz processor.  4GB ram. 64bit windows 7 home premium. with ATI radeon hd 4530 video card.
    When i am in Adobe Premiere and choose Edit/Prefrences - and select any option (ie General, filed, editing, etc) the program locks up with a box saying loading.  It will
    stay there forever until i use task manager to quit program.
    I have tried deleting the Pref files from computer and restarting and it still does not help.  Any ideas on what could be causeing this?  I did upgrade from Version 8 to version 9.

    It could be an improper installation.
    But that's assuming you've got a clean, tuned and defragmented C drive. Have you run a program like Advanced System Care recently and defragged the drive?
    http://www.iobit.com/advancedsystemcareper.html
    (New computers can be a mess of tmp files and fragmentation!)
    Also, manually go to Windows Update and ensure you have all of the necessary updates and ensure that you have the latest version of Quicktime.
    You may also need to uninstall/reinstall the program. Maybe it just didn't take.
    Though it sounds to me much more like a resource issue. Advanced System Care and a defragging should take care of it (assuming you've got a couple hundred gigs of free space on your C drive).

  • Unable to access objects under the schema after refresh

    Hi,
    I refreshed one of my schema (XXX) from a Production to QA.
    I checked and found that all the objects have been refreshed correctly.
    But when I try to query the object from the schema, I get the error. ORA-00942: table or view does not exists.
    When I query it using, XXX.table_name -> I get the desired output.
    What am I missing here? Some privileges? Could someone please help me on this?
    Thanks!

    user9104898 wrote:
    Hi,
    I refreshed one of my schema (XXX) from a Production to QA.
    I checked and found that all the objects have been refreshed correctly.
    But when I try to query the object from the schema, I get the error. ORA-00942: table or view does not exists.
    When I query it using, XXX.table_name -> I get the desired output.
    What am I missing here? Some privileges? Could someone please help me on this?
    Thanks!Hi.How you refresh your "XXX" schema from according production schema?,drop and create objects again?.If yes then that is possible because all privileges(in this case object) which related these objects was lost, therefore you get an error as "ORA-00942: table or view does not exists".You have to give grant(select or other) again related these objects to desired users.

  • Cannot access AOL email through browser after security wipe

    ok - the blackberry is failing miserably
    first - the bluetooth isn't reconnecting to the radio to receive text messages
    the keyboard is having a hardware issue - the symbol keys appears to be taking over the n and m key
    the phone was a year old in june - 
    to try to correct this - blackberry support suggested that I back up the phone and reload the software - great did this
    then they suggested a secuirty wipe - yup - did this too
    then I restored the phone with the back up
    now when I try to log into AOL through the browser - it get to the home page, type in the passsword and get an error message.  It logs in on other cell phones - so its definitely mine.  The emails come through if I set it up on the blackberry itself
    anhy odea how to fix it before I go to bell

    That is quite interesting, I've never seen an error message start with "GAH!" before...quite interesting.
    Nevertheless, please try this. With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1 should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Please wait for one "registration" message to arrive
    2) Reboot
    Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I am using FF 13.01 and now cannot access any YouTube videos. I tried deleting cookies, deleting history and installed the new Adobe Flash player.

    When opening any video on YouTube, I receive the following notice: "An error occurred. Please try again."
    I installed FF 13.01 by means of the automatic updater.
    Before the update, I was able to access YouTube videos. After the update, I have not.
    Before the update, Chrome was the default browser. I changed this to FF. Since then, I have not been able to view videos through FF.
    Chrome accesses YouTube videos.
    The video showing add-ons within Firefox does work.
    Two add-ons are listed: RealPlayer Browser Record Plugin and Skype Click to Call. Both are disabled.

    There are some compatibility issues between the latest Flash player and some Firefox add-ons or settings. Could you see whether anything in these articles helps:
    * [[Flash 11.3 doesn't load video in Firefox]]
    * [[Flash 11.3 crashes]]

Maybe you are looking for