Cannot access SAPMNT hosted on NT Cluster
We need to access SAPMNT hosted on CI node name R3-FFHK-CLS01 of the
PRD NT cluster
(CI and DB node) from another SAP QAS server name SAENUS.
The SAPLOC and SAPMNT was created during SAP installation and have been
granted everyone full control permission on both CI and DB node of PRD
NT cluster and SAP QAS server.
Despite the above, when we logon to Windows 2003 on SAP QAS server name
SAENUS to access the SAPMNT hosted on CI node name R3-FFHK-CLS01 of PRD
NT cluster, we received the following error :
R3-FFHK-CLS01\sapmnt\ is not accessible. You might not have
permission to use this network resource. Contact the administrator to
find out if you have access permissions. Access is denied.
We can connect and see the shares inside
R3-FFHK-CLS01 but cannot
access
R3-FFHK-CLS01\sapmnt. Strange.
On the other hand, if we logon to Windows 2003 on either node of PRD NT
cluster we can access the SAPMNT share hosted on SAP QAS server name
SAENUS without permission problem.
Regards, Johne.
We logon to the cluster with domaina\prdadm.
We logon to the QAS with domaina\qasadm.
We can access SAPMNT hosted on QAS from cluster when logged onto cluster using domaina\prdadm.
We can't access SAPMNT hosted on cluster from QAS when logged onto QAS using domaina\qasadm.
Both SAPMNT has been granted everyone full control permission.
Similar Messages
-
VPN client cannot access inside hosts
Hello,
I have an ASA 5505 device with the attached configuration and my vpn clients can connect to it fine. Although, once a vpn client is connected they cannot RDP, ping, or telnet any internal hosts. The goal is to have a connected vpn client to have all access rights as anyone sitting on the internal network. Any assistance is greatly appreciated.
: Saved
ASA Version 7.2(3)
hostname Kappa-GW01
domain-name Kappa.com
enable password xxxxxxxxx encrypted
names
name 172.20.42.42 UMEFTP2 description UMAP FTP2
name 172.20.40.246 UMEMAIL1 description Exchange Server
name 172.20.41.3 UMERPS
name x.x.81.81 Wilkes
name x.x.84.41 KappaPittston
dns-guard
interface Ethernet0/0
shutdown
nameif outside
security-level 0
ip address x.x.148.194 255.255.255.248
interface Ethernet0/1
nameif Outside_Windstream
security-level 0
ip address x.x.205.210 255.255.255.240
interface Ethernet0/2
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
passwd 7Tpgc2AiWGxbNjkj encrypted
boot system disk0:/asa723-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name Kappa.com
object-group network Blue_Bell_Internal_Networks
description Blue Bell internal network Group
network-object 192.168.100.0 255.255.255.0
network-object 10.0.0.0 255.255.255.0
network-object 10.0.1.0 255.255.255.0
network-object 10.0.2.0 255.255.255.0
object-group network VPN-Sites
network-object host Wilkes
network-object host KappaPittston
object-group network Michigan_VPN_GRP
network-object 172.20.40.0 255.255.252.0
object-group network ASA_OutSide_Vendors
description ASA OutSide Vendor Access
access-list 101 extended permit ip 10.0.0.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list 101 extended permit ip 10.0.1.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list 101 extended permit ip 10.0.2.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list 101 extended permit ip 172.20.40.0 255.255.252.0 192.168.100.0 255.255.255.0
access-list KappaVPN_splitTunnelAcl remark Blue Bell Office
access-list KappaVPN_splitTunnelAcl standard permit 10.0.0.0 255.255.255.0
access-list KappaVPN_splitTunnelAcl remark Williamston Office
access-list KappaVPN_splitTunnelAcl standard permit 172.20.40.0 255.255.252.0
access-list KappaVPN_splitTunnelAcl remark Pittston Office
access-list KappaVPN_splitTunnelAcl standard permit 10.0.10.0 255.255.255.0
access-list KappaVPN_splitTunnelAcl standard permit 10.0.2.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.0.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.0.0 255.255.255.0 10.0.2.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.0.0 255.255.255.0 10.0.10.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.0.0 255.255.255.0 10.0.30.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.0.0 255.255.255.0 172.20.40.0 255.255.252.0 inactive
access-list inside_nat0_outbound extended permit ip 10.0.2.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.10.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.30.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 172.20.40.0 255.255.252.0 192.168.100.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 172.20.40.0 255.255.252.0 10.0.30.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 172.20.40.0 255.255.252.0 10.0.10.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 172.20.40.0 255.255.252.0 10.0.2.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip any 192.168.100.0 255.255.255.0
access-list outside_2_cryptomap extended permit ip 10.0.0.0 255.255.255.0 172.20.48.0 255.255.252.0
access-list umeemp_splitTunnelAcl standard permit 10.0.0.0 255.255.255.0
access-list umeemp_splitTunnelAcl standard permit 172.20.40.0 255.255.252.0
access-list umeemp_splitTunnelAcl standard permit 10.0.30.0 255.255.255.0
access-list umeemp_splitTunnelAcl standard permit 10.0.2.0 255.255.255.0
access-list outside_5_cryptomap extended permit ip 10.0.0.0 255.255.255.0 10.0.10.0 255.255.255.0
access-list inside_access_in extended permit ip any any
access-list 102 extended permit tcp any any eq 2000
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.220 eq smtp
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.220 eq pop3 inactive
access-list Outside_Winstream_access_in extended permit udp object-group VPN-Sites interface Outside_Windstream eq isakmp
access-list Outside_Winstream_access_in extended permit tcp object-group ASA_OutSide_Vendors host x.x.205.217 eq 4080
access-list Outside_Winstream_access_in remark SMTP Access
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.218 eq smtp
access-list Outside_Winstream_access_in remark POP access
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.218 eq pop3
access-list Outside_Winstream_access_in remark OWA Access
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.218 eq https
access-list Outside_Winstream_access_in extended permit tcp host x.x.87.65 host x.x.205.218 eq 3389
access-list Outside_Winstream_access_in extended permit udp host x.x.56.111 eq ntp host x.x.205.216 eq ntp
access-list Outside_Winstream_access_in remark OWA UMAP
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.211 eq https
access-list Outside_Winstream_access_in remark JLAN
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.215 eq https
access-list Outside_Winstream_access_in remark UMERPS
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.212 eq https
access-list Outside_Winstream_access_in remark UMERPS
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.212 eq ssh
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.213 eq https
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.213 eq 5494
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.214 eq www
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.211 eq 8081
access-list Outside_Winstream_access_in extended permit icmp any any echo
access-list outside_6_cryptomap extended permit ip 10.0.0.0 255.255.255.0 10.0.2.0 255.255.255.0
access-list outside_6_cryptomap extended permit ip 172.20.40.0 255.255.255.0 10.0.2.0 255.255.255.0
access-list Outside_Windstream_cryptomap_11 extended permit ip 172.20.40.0 255.255.255.0 10.0.2.0 255.255.255.0
access-list Outside_Windstream_cryptomap_10 extended permit ip 10.0.0.0 255.255.255.0 10.0.2.0 255.255.255.0
access-list Outside_Windstream_cryptomap_5 extended permit ip 10.0.0.0 255.255.255.0 10.0.10.0 255.255.255.0
access-list Outside_Windstream_cryptomap_12 extended permit ip 172.20.40.0 255.255.255.0 10.0.2.0 255.255.255.0
access-list Outside_Windstream_2_cryptomap extended permit ip 10.0.0.0 255.255.255.0 172.20.48.0 255.255.252.0
access-list nonat extended permit ip any any inactive
pager lines 24
logging enable
logging asdm debugging
logging flash-bufferwrap
mtu outside 1500
mtu Outside_Windstream 1500
mtu inside 1500
mtu management 1500
ip local pool vpn-pool 192.168.100.100-192.168.100.200
no failover
monitor-interface outside
monitor-interface Outside_Windstream
monitor-interface inside
monitor-interface management
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-523.bin
no asdm history enable
arp timeout 14400
nat-control
global (Outside_Windstream) 1 x.x.205.216 netmask 255.0.0.0
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 172.20.40.0 255.255.252.0
nat (inside) 1 10.0.0.0 255.255.0.0
static (inside,Outside_Windstream) x.x.205.217 10.0.0.20 netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.220 10.0.0.21 netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.218 10.0.0.15 netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.215 172.20.40.145 netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.211 UMEMAIL1 netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.212 UMERPS netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.213 172.20.40.243 netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.214 172.20.40.146 netmask 255.255.255.255
access-group acl_inbound in interface outside
access-group Outside_Winstream_access_in in interface Outside_Windstream
route Outside_Windstream 0.0.0.0 0.0.0.0 x.x.205.209 1
route inside 172.20.40.0 255.255.252.0 10.0.0.3 1
route inside 10.0.30.0 255.255.255.0 10.0.0.254 1
route inside 10.0.1.0 255.255.255.0 10.0.0.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
aaa-server BBPA-SRV-DC01 protocol radius
aaa-server BBPA-SRV-DC01 host 10.0.0.15
timeout 5
key G6G7#02bj!
aaa-server UMAP protocol radius
aaa-server UMAP host 172.20.40.245
timeout 5
key gfrt1a
aaa-server UMAP host 172.20.40.244
timeout 5
key gfrt1a
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
aaa authentication telnet console LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
http 10.0.0.15 255.255.255.255 inside
http 192.168.1.0 255.255.255.0 management
http 192.168.100.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set pfs
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto dynamic-map Outside_Windstream_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map Outside_Windstream_dyn_map 40 set pfs
crypto dynamic-map Outside_Windstream_dyn_map 40 set transform-set ESP-3DES-SHA
crypto map outside_map 5 match address outside_5_cryptomap
crypto map outside_map 5 set peer Wilkes
crypto map outside_map 5 set transform-set ESP-3DES-SHA
crypto map outside_map 10 match address outside_6_cryptomap
crypto map outside_map 10 set peer KappaPittston
crypto map outside_map 10 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto map Outside_Windstream_map 5 match address Outside_Windstream_cryptomap_5
crypto map Outside_Windstream_map 5 set peer Wilkes
crypto map Outside_Windstream_map 5 set transform-set ESP-3DES-SHA
crypto map Outside_Windstream_map 10 match address Outside_Windstream_cryptomap_10
crypto map Outside_Windstream_map 10 set peer KappaPittston
crypto map Outside_Windstream_map 10 set transform-set ESP-3DES-SHA
crypto map Outside_Windstream_map 65535 ipsec-isakmp dynamic Outside_Windstream_dyn_map
crypto map Outside_Windstream_map interface Outside_Windstream
crypto isakmp enable Outside_Windstream
crypto isakmp policy 5
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 3600
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption des
hash md5
group 2
lifetime 86400
crypto isakmp nat-traversal 20
telnet 10.0.0.0 255.255.0.0 inside
telnet timeout 5
ssh 10.0.0.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
management-access inside
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns migrated_dns_map_1
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns migrated_dns_map_1
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ftp
inspect skinny
inspect pptp
service-policy global_policy global
webvpn
enable Outside_Windstream
svc image disk0:/sslclient-win-1.1.4.177.pkg 1
svc enable
group-policy DfltGrpPolicy attributes
banner none
wins-server none
dns-server none
dhcp-network-scope none
vpn-access-hours none
vpn-simultaneous-logins 3
vpn-idle-timeout 30
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec l2tp-ipsec webvpn
password-storage disable
ip-comp disable
re-xauth disable
group-lock none
pfs disable
ipsec-udp disable
ipsec-udp-port 10000
split-tunnel-policy tunnelspecified
split-tunnel-network-list none
default-domain none
split-dns none
intercept-dhcp 255.255.255.255 disable
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout 30
ip-phone-bypass disable
leap-bypass disable
nem disable
backup-servers keep-client-config
msie-proxy server none
msie-proxy method no-modify
msie-proxy except-list none
msie-proxy local-bypass disable
nac disable
nac-sq-period 300
nac-reval-period 36000
nac-default-acl none
address-pools none
smartcard-removal-disconnect enable
client-firewall none
client-access-rule none
webvpn
functions url-entry
html-content-filter none
homepage none
keep-alive-ignore 4
http-comp gzip
filter none
url-list none
customization value DfltCustomization
port-forward none
port-forward-name value Application Access
sso-server none
deny-message value Login was successful, but because certain criteria have not been met or due to some specific group policy, you do not have permission to use any of the VPN features. Contact your IT administrator for more information
svc required
svc keep-installer installed
svc keepalive none
svc rekey time none
svc rekey method none
svc dpd-interval client none
svc dpd-interval gateway none
svc compression deflate
group-policy umeemp internal
group-policy umeemp attributes
dns-server value 172.20.40.245
vpn-filter none
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value KappaVPN_splitTunnelAcl
default-domain value umapinc.com
group-policy KappaVPN internal
group-policy KappaVPN attributes
wins-server value 10.0.0.15
dns-server value 10.0.0.15
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value umeemp_splitTunnelAcl
default-domain value kappa.loc
username gwadmin password AVjtEPq7nvtiAAk0 encrypted
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool vpn-pool
authentication-server-group BBPA-SRV-DC01
authorization-required
tunnel-group KappaVPN type ipsec-ra
tunnel-group KappaVPN general-attributes
address-pool vpn-pool
authentication-server-group BBPA-SRV-DC01
default-group-policy KappaVPN
tunnel-group KappaVPN ipsec-attributes
pre-shared-key *
tunnel-group x.x.131.62 type ipsec-l2l
tunnel-group x.x.131.62 ipsec-attributes
pre-shared-key *
tunnel-group x.x.232.2 type ipsec-l2l
tunnel-group x.x.232.2 ipsec-attributes
pre-shared-key *
tunnel-group x.x.49.114 type ipsec-l2l
tunnel-group x.x.49.114 ipsec-attributes
pre-shared-key *
tunnel-group x.x.226.218 type ipsec-l2l
tunnel-group x.x.226.218 ipsec-attributes
pre-shared-key *
tunnel-group x.x.116.133 type ipsec-l2l
tunnel-group x.x.116.133 ipsec-attributes
pre-shared-key *
tunnel-group x.x.21.36 type ipsec-l2l
tunnel-group x.x.21.36 ipsec-attributes
pre-shared-key *
tunnel-group umeemp type ipsec-ra
tunnel-group umeemp general-attributes
address-pool vpn-pool
authentication-server-group UMAP
default-group-policy umeemp
tunnel-group umeemp ipsec-attributes
pre-shared-key *
tunnel-group x.x.81.81 type ipsec-l2l
tunnel-group x.x.81.81 ipsec-attributes
pre-shared-key *
tunnel-group x.x.84.41 type ipsec-l2l
tunnel-group x.x.84.41 ipsec-attributes
pre-shared-key *
prompt hostname context
Cryptochecksum:xxxxxxxxxxxxxxxxxxxxx
: end
asdm image disk0:/asdm-523.bin
no asdm history enableI'm sorry, I misunderstood what you were asking. Yes those three networks are on the inside of our ASA. we have 2 outside of the ASA (10.0.2.x, 10.0.10.x). When our clients vpn they connect to the x.x.205.210 ip address, which maps them depending on the preshared key that puts them on either the kappaVPN or the umeempVPN. (I am kind of new to configuring the ASA). When the cisco vpn client connects to the network, I checked the statistics and it lists all of our LAN networks under secure routes. I cannot ping anything inside the LAN nor can I connect RDP, telnet or anything.
Hope this answers your questions, just let me know if you need any more information.
-Rudy -
Cannot access mailbox hosted on remote EX2010 server through OWA
Our Internet facing OWA is published through our EX2013 server as MAIL.CONTOSO.COM
We have multiple sites acrossed global. OWA proxy from EX2013 to EX2010 works fine for NZ and US. But for some reason when tries to access mailbox on UK EX2010 SP3 server through the EX2013 OWA, I got error below:
OWA-Error: Microsoft.Exchange.Data.Storage.NotSupportedWithServerVersionException
X-OWA-Version: 15.0.775.32
X-FEServer: EX2013-CAS
X-BEServer: EX2013-CAS
Checked the mailbox ExchangeVersion on the UK EX2010 server, it is 0.10 (14.0.100.0) same as NZ and US EX2010 mailbox users.What is the version using get-exchangeServer | FL *Version* ? 2010 Sp3 is required at a minimum : Build 14.3.123.4
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
ASA 5505 VPN can't access inside host
I have setup remote VPN access on a ASA 5505 but cannot access the host or ASA when I login using the VPN. I can connect with the Cisco VPN client and the VPN light is on on the ASA and it shows that I'm connected. I have the correct Ip address but I cannot ping or connect to any of the internal addresses. I cannot find what I'm missing. I have the VPN bypassing the interface ACLs. Since I can login but not go anywhere I feel certian I missed something.
part of config below
interface Vlan1
nameif inside
security-level 100
ip address 10.1.1.1 255.255.255.0
ip local pool xxxx 10.1.1.50-10.1.1.55 mask 255.255.255.0
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set pfs
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto dynamic-map inside_dyn_map 20 set pfs
crypto dynamic-map inside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic inside_dyn_map
crypto map inside_map interface inside
crypto isakmp enable inside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
service-policy global_policy global
group-policy xxxxxxx internal
group-policy xxxxxxx attributes
banner value xxxxx Disaster Recovery Site
wins-server none
dns-server value 24.xxx.xxx.xx
vpn-access-hours none
vpn-simultaneous-logins 3
vpn-idle-timeout 30
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelall
default-domain none
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout none
ip-phone-bypass disable
leap-bypass disable
nem disable
nac disable
nac-sq-period 300
nac-reval-period 36000
nac-default-acl none
address-pools value xxxxxx
smartcard-removal-disconnect enable
client-firewall none
webvpn
functions url-entry
vpn-nac-exempt none
no vpn-addr-assign aaa
no vpn-addr-assign dhcp
tunnel-group xxxx type ipsec-ra
tunnel-group xxxx general-attributes
address-pool xxxx
default-group-policy xxxx
tunnel-group blountdr ipsec-attributes
pre-shared-key *I get the banner and IP adress info...
This is what the client log provides...
1 13:45:32.942 05/30/08 Sev=Warning/2 CVPND/0xE3400013
AddRoute failed to add a route: code 87
Destination 172.20.255.255
Netmask 255.255.255.255
Gateway 10.1.2.1
Interface 10.1.2.5
2 13:45:32.942 05/30/08 Sev=Warning/2 CM/0xA3100024
Unable to add route. Network: ac14ffff, Netmask: ffffffff, Interface: a010205, Gateway: a010201. -
ASA 5505 Static hosts cannot access outside
I'm replacing an old PIX with a second hand ASA firewall.
I have configured the ASA in a very similar manner to how the PIX was set up but I'm having trouble with some hosts on the inside accessing the Internet. Any inside hosts which use DHCP work fine. Any inside hosts with a static IP (and configured on the ASA with a "static" rule) cannot access the Internet. For example, in the config below the server daviker-dialler cannot access the Internet.
I've spent a few days working on this now and have started from scratch several times but I'm not getting anywhere.
Apologies for all the X's everywhere, didn't like to post anything sensitive on the Internet. If I've obscured something pertinent let me know.
Any advice would be greatly appreciated! Thanks.
: Saved
ASA Version 7.2(3)
hostname fw-1
domain-name XXXX
enable password XXXX encrypted
names
name 92.X.X.61 bb-office
name 92.X.X.128 gl-office
name 10.0.0.117 daviker-dialler_in
name 77.X.X.117 daviker-dialler_out
name 10.0.0.112 data-2_in
name 77.X.X.112 data-2_out
name 10.0.0.81 corp-1_in
name 77.X.X.81 corp-1_out
name 10.0.0.111 data-1_in
name 77.X.X.210 user_75
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 77.X.X.66 255.255.255.192
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
passwd XXXX encrypted
ftp mode passive
dns server-group DefaultDNS
domain-name XXXX
access-list inbound extended permit tcp host bb-office host daviker-dialler_out eq 5900
access-list inbound extended permit tcp host bb-office host daviker-dialler_out eq 4040
access-list inbound extended permit tcp host bb-office host daviker-dialler_out eq 9876
access-list inbound extended permit tcp host bb-office host daviker-dialler_out eq sip
access-list inbound extended permit tcp host bb-office host daviker-dialler_out eq www
access-list inbound extended permit tcp host bb-office host daviker-dialler_out eq https
access-list inbound extended permit udp host bb-office host daviker-dialler_out eq sip
access-list inbound extended permit tcp host bb-office host daviker-dialler_out eq 1433
access-list inbound extended permit udp host bb-office host daviker-dialler_out eq netbios-ns
access-list inbound extended permit udp host bb-office host daviker-dialler_out eq netbios-dgm
access-list inbound extended permit tcp host bb-office host daviker-dialler_out eq netbios-ssn
access-list inbound extended permit tcp host bb-office host daviker-dialler_out eq 445
access-list inbound extended permit tcp host gl-office host daviker-dialler_out eq 4040
access-list inbound extended permit tcp host gl-office host daviker-dialler_out eq 9876
access-list inbound extended permit tcp host gl-office host daviker-dialler_out eq sip
access-list inbound extended permit tcp host gl-office host daviker-dialler_out eq www
access-list inbound extended permit tcp host gl-office host daviker-dialler_out eq https
access-list inbound extended permit udp host gl-office host daviker-dialler_out eq sip
access-list inbound extended permit tcp host gl-office host daviker-dialler_out eq 1433
access-list inbound extended permit udp host gl-office host daviker-dialler_out eq netbios-ns
access-list inbound extended permit udp host gl-office host daviker-dialler_out eq netbios-dgm
access-list inbound extended permit tcp host gl-office host daviker-dialler_out eq netbios-ssn
access-list inbound extended permit tcp host gl-office host daviker-dialler_out eq 445
access-list inbound extended permit tcp host gl-office host daviker-dialler_out eq 5900
access-list inbound extended permit tcp any host data-2_out eq ssh
access-list inbound extended permit tcp any host corp-1_out eq ssh
access-list inbound extended permit tcp any host corp-1_out eq www
access-list inbound extended permit tcp any host corp-1_out eq pop3
access-list inbound extended permit tcp any host corp-1_out eq imap4
access-list inbound extended permit tcp any host corp-1_out eq smtp
access-list inbound extended permit tcp any host corp-1_out eq 995
access-list inbound extended permit tcp any host corp-1_out eq 465
access-list inbound extended permit tcp any host corp-1_out eq 993
access-list inbound extended permit tcp any host corp-1_out eq 8008
access-list inbound extended permit udp 77.X.X.64 255.255.255.192 host 77.X.X.113 eq netbios-ns
access-list inbound extended permit udp 77.X.X.64 255.255.255.192 host 77.X.X.113 eq netbios-dgm
access-list inbound extended permit tcp 77.X.X.64 255.255.255.192 host 77.X.X.113 eq netbios-ssn
access-list inbound extended permit tcp 77.X.X.64 255.255.255.192 host 77.X.X.113 eq 445
access-list inbound extended permit udp any host 77.X.X.113 eq netbios-ns
access-list inbound extended permit udp any host 77.X.X.113 eq netbios-dgm
access-list inbound extended permit tcp any host 77.X.X.113 eq netbios-ssn
access-list inbound extended permit tcp any host 77.X.X.113 eq 445
access-list inbound extended permit tcp host bb-office host data-2_out eq 5901
access-list inbound extended permit tcp host bb-office host data-2_out eq 3690
access-list inbound extended permit tcp host bb-office host data-2_out eq www
access-list inbound extended permit tcp host bb-office host daviker-dialler_out eq 3389
access-list inbound extended permit tcp host 2.X.X.18 host data-2_out eq 3306
access-list inbound extended permit tcp any host data-2_out eq 3306
access-list inbound extended permit tcp host 212.X.X.7 host daviker-dialler_out eq 5900
access-list inbound extended permit tcp host bb-office host data-2_out eq 3306
access-list inbound extended permit tcp host user_75 host daviker-dialler_out eq 1433
access-list inbound extended permit tcp host user_75 host daviker-dialler_out eq 5900
access-list inbound extended permit tcp host user_75 host data-2_out eq 3690
access-list inbound extended permit tcp host user_75 host data-2_out eq www
access-list inbound extended permit tcp host user_75 host data-2_out eq 3306
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-523.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) daviker-dialler_out daviker-dialler_in netmask 255.255.255.255
static (inside,outside) corp-1_out corp-1_in netmask 255.255.255.255
static (inside,outside) data-2_out data-2_in netmask 255.255.255.255
static (inside,outside) 77.X.X.113 data-1_in netmask 255.255.255.255
access-group inbound in interface outside
route outside 0.0.0.0 0.0.0.0 77.X.X.65 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
aaa authorization command LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 5
console timeout 0
dhcpd dns 77.X.X.91 8.8.8.8
dhcpd domain cagltd.net
dhcpd auto_config outside
dhcpd address 10.0.0.20-10.0.0.40 inside
dhcpd enable inside
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
username matt password XXXX encrypted
prompt hostname context
Cryptochecksum:00af76f23831b8c828fc6677c9069072
: endHi Jouni,
Thanks for the info.
I didn't have icmp traffic allowed, so I knew ping wouldn't be working. I was testing using http.
I have enabled icmp and dhcp clients can ping outside. Static nat clients can't ping outside. Static clients also cannot use outbound http.
As suggested, I have run some packet traces.
From a static nat client on the ASA:
fw-1# packet-tracer input inside tcp 10.0.0.81 80 173.203.209.67 80
Phase: 1
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
Implicit Rule
Additional Information:
MAC Access list
Phase: 2
Type: FLOW-LOOKUP
Subtype:
Result: ALLOW
Config:
Additional Information:
Found no matching flow, creating a new flow
Phase: 3
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 0.0.0.0 0.0.0.0 outside
Phase: 4
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 5
Type: NAT
Subtype:
Result: ALLOW
Config:
static (inside,outside) corp-1_out corp-1_in netmask 255.255.255.255
match ip inside host corp-1_in outside any
static translation to corp-1_out
translate_hits = 668, untranslate_hits = 2
Additional Information:
Static translate corp-1_in/0 to corp-1_out/0 using netmask 255.255.255.255
Phase: 6
Type: NAT
Subtype: host-limits
Result: ALLOW
Config:
static (inside,outside) corp-1_out corp-1_in netmask 255.255.255.255
match ip inside host corp-1_in outside any
static translation to corp-1_out
translate_hits = 668, untranslate_hits = 2
Additional Information:
Phase: 7
Type: HOST-LIMIT
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 8
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 9
Type: FLOW-CREATION
Subtype:
Result: ALLOW
Config:
Additional Information:
New flow created with id 1759, packet dispatched to next module
Phase: 10
Type: ROUTE-LOOKUP
Subtype: output and adjacency
Result: ALLOW
Config:
Additional Information:
found next-hop 77.X.X.65 using egress ifc outside
adjacency Active
next-hop mac address 0017.0f13.5000 hits 1
Result:
input-interface: inside
input-status: up
input-line-status: up
output-interface: outside
output-status: up
output-line-status: up
Action: allow
This looks fine to me, but as I say, an outbound tcp port 80 connection from the actual machine on 10.0.0.81 fails.
Here is a similar trace from a dhcp client to the same destination:
fw-1# packet-tracer input inside tcp 10.0.0.20 80 173.203.209.67 80
Phase: 1
Type: FLOW-LOOKUP
Subtype:
Result: ALLOW
Config:
Additional Information:
Found no matching flow, creating a new flow
Phase: 2
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 0.0.0.0 0.0.0.0 outside
Phase: 3
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 4
Type: NAT
Subtype:
Result: ALLOW
Config:
nat (inside) 1 0.0.0.0 0.0.0.0
match ip inside any outside any
dynamic translation to pool 1 (77.74.111.66 [Interface PAT])
translate_hits = 990, untranslate_hits = 226
Additional Information:
Dynamic translate 10.0.0.20/80 to 77.74.111.66/1 using netmask 255.255.255.255
Phase: 5
Type: NAT
Subtype: host-limits
Result: ALLOW
Config:
nat (inside) 1 0.0.0.0 0.0.0.0
match ip inside any inside any
dynamic translation to pool 1 (No matching global)
translate_hits = 0, untranslate_hits = 0
Additional Information:
Phase: 6
Type: HOST-LIMIT
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 7
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 8
Type: FLOW-CREATION
Subtype:
Result: ALLOW
Config:
Additional Information:
New flow created with id 1771, packet dispatched to next module
Phase: 9
Type: ROUTE-LOOKUP
Subtype: output and adjacency
Result: ALLOW
Config:
Additional Information:
found next-hop 77.X.X.65 using egress ifc outside
adjacency Active
next-hop mac address 0017.0f13.5000 hits 5
Result:
input-interface: inside
input-status: up
input-line-status: up
output-interface: outside
output-status: up
output-line-status: up
Action: allow
I can see the difference in the NAT translation section. A real outbound tcp port 80 connection from the actual machine on 10.0.0.20 works fine.
Finally, for the sake of comparison, I ran a similar packet trace using a static nat IP on the old PIX firewall:
old-fw-1# packet-tracer input inside tcp 10.0.0.117 80 173.203.209.67 80
Phase: 1
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
Implicit Rule
Additional Information:
MAC Access list
Phase: 2
Type: FLOW-LOOKUP
Subtype:
Result: ALLOW
Config:
Additional Information:
Found no matching flow, creating a new flow
Phase: 3
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 0.0.0.0 0.0.0.0 outside
Phase: 4
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 5
Type: INSPECT
Subtype: np-inspect
Result: ALLOW
Config:
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect http
service-policy global_policy global
Additional Information:
Phase: 6
Type: NAT
Subtype:
Result: ALLOW
Config:
static (inside,outside) daviker-dialler_out daviker-dialler_in netmask 255.255.255.255
nat-control
match ip inside host daviker-dialler_in outside any
static translation to daviker-dialler_out
translate_hits = 17132, untranslate_hits = 1277850
Additional Information:
Static translate daviker-dialler_in/0 to daviker-dialler_out/0 using netmask 255.255.255.255
Phase: 7
Type: NAT
Subtype: host-limits
Result: ALLOW
Config:
static (inside,outside) daviker-dialler_out daviker-dialler_in netmask 255.255.255.255
nat-control
match ip inside host daviker-dialler_in outside any
static translation to daviker-dialler_out
translate_hits = 17132, untranslate_hits = 1277850
Additional Information:
Phase: 8
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 9
Type: FLOW-CREATION
Subtype:
Result: ALLOW
Config:
Additional Information:
New flow created with id 1006075, packet dispatched to next module
Phase: 10
Type: ROUTE-LOOKUP
Subtype: output and adjacency
Result: ALLOW
Config:
Additional Information:
found next-hop 78.X.X.69 using egress ifc outside
adjacency Active
next-hop mac address 0017.0f13.5000 hits 572133
Result:
input-interface: inside
input-status: up
input-line-status: up
output-interface: outside
output-status: up
output-line-status: up
Action: allow
Outbound traffic from static nat hosts on the old PIX firewall works fine. One glaring difference is that the PIX is inspecting http traffic, but surely this is a red herring. Another difference is that the old and new firewalls have different gateways / default routes & different outside IP addresses. As the new ASA firewall (and its dhcp hosts) can talk to the outside world quite happily I don't think this is relevant.
I wondered whether it might be down to the difference in the inside (255.255.255.0) and outside (255.255.255.192) subnets. The set up is the same on the PIX, but I wondered whether some other line of config might be required on the ASA to handle it. I adjusted the subnet of the inside interface on the ASA to match the outside one (both 255.255.255.192) but it didn't make any difference.
So I'm puzzled! -
VM cannot access Internet when host is connected to VPN
Hello everyone,
I have a little problem with my Hyper-V network. I use internal switch (external seems to have problems when I want to access the host via RDP and host has Wifi only).
Now attached is my configuration as a wonderful picture. ;) My problem is this: I have a internal switch in Hyper-V which is used by the VMs. They can access the Internet because the host WiFi Adapter has Internet Sharing enabled. However, when I connect
the host to the VPN, the VMs cannot access the internet anymore. I know it is not possible to share the VPN-Connection itself, but without any Internet I cannot connect the VMs to the VPN at all. So is there any way to connect the host to VPN and also the
VMs?
Thanks! :)
Best,
ChrisHi CBuntrock,
Please try the following setps :
Open network connection --> right click the vpn connection --> properties --> click tab Networking --> click the proper internet protocol version --> properties --> advanced --> tab ipsettings --> uncheck "use defult gateway
on remote network " --> ok
Please try to access internet again from your VMs .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Cannot access web site hosted on Azure VM
I have created Windows Server 2012R2 VM and after creating VM I have installed IIS and hosted my site and found it is working fine inside the VM.
Then I have added HTTP end point to my VM from azure portal. After creating http end point I cannot access my web site using MyHostName.cloudapp.net.
Can you help me why http end point is not working?
Then I have crated VM with template and there I have defined HTTP endpoint before creating VM.
Finally I found that if I create end point before creating VM then it works fine and if I create endpoint after creating VM then it doesn’t work.
Can you kindly help me to solve this issue (so that end point works properly after creating VM)?
Hasibul Haque,MCC2011,MCPD hasibulhaque.comHi,
You can check the port you bind for the website in IIS and make sure you have created endpoint with the correct port. You can also install Telnet client on your local computer and run "telnet xxx.cloudapp.net public_port_in_endpoint" at the command
prompt to see it works.
Have you enable SSL on the website hosted on Azure VM? If yes, please also create an endpoint with port 443 and open that port in Windows Firewall on the VM.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
bei System.Windows.Forms.Control.NotifyEnter()
bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.IO.UnmanagedMemoryStream.ReadByte()
bei System.IO.BinaryReader.ReadByte()
bei System.IO.BinaryReader.Read7BitEncodedInt()
bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.Reflection.RuntimeParameterInfo.get_Name()
bei System.Diagnostics.StackTrace.ToString(TraceFormat)
bei System.Environment.GetStackTrace(System.Exception, Boolean)
bei System.Exception.GetStackTrace(Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Mail cannot access your mailbox information because it is in use
I have my mail on a Truecrypt drive and I have an alias pointing to that drive in my library and so sometimes I get this message:
"Mail cannot access your mailbox information because it is in use."
Options are:
"Quit and rebuild Information" or "Quit"
If I rebuild then I was losing all my sent messages which is a drag and it takes a while to re-download all the messages. So what I tried was deleting the Envelope Index.lock file and then launch mail and it started up with no problems.
I think the reason this is happening is that it is possible that when I shut my computer down, Truecrypt dismounts the drive while Mail is accessing the mail folder (hence the lock file) and so when I start up again and remount the truecrypt drive that lock file is still there and I have to delete it or Mail thinks some other program is using the mail folder. Just a guess.
Hope this helps someone else if they Google this error.I do but I do it from another computer -- that is the whole point of IMAP, by the way. I don't see how my accessing the IMAP server from another computer should cause Mail.app to think that my mailboxes on my local host, which are just copies, need to be rebuilt. I filed a bug on this and Apple gave me the annoying "Known issue" response, which means maybe they'll fix it, maybe not, thank you very much. It went away for a while, and now it's back again... sigh.
-
Vpn client can access internet but cannot access internal network
I am using PIX 501 to setup a VPN. At first the VPN client cannot access the internet once they logged in via the Cisco system vpn client, so i enable split tunneling. Now the VPN client can access the internet but they can't access the internal network.Due to the limited characters can be posted here, only necessary IOS coding is posted on the next message. Who knows how to solve this problem? Pls Help.....
enable password ********** encrypted
passwd ********** encrypted
hostname Firewall
domain-name aqswdefrgt.com.sg
access-list 100 permit ip 192.168.1.0 255.255.255.0 192.168.50.0 255.255.255.0
access-list nat permit tcp any host 65.165.123.142 eq smtp
access-list nat permit tcp any host 65.165.123.142 eq pop3
access-list nat permit tcp any host 65.165.123.143 eq smtp
access-list nat permit tcp any host 65.165.123.143 eq pop3
access-list nat permit tcp any host 65.165.123.143 eq www
access-list nat permit tcp any host 65.165.123.152 eq smtp
access-list nat permit tcp any host 65.165.123.152 eq pop3
access-list nat permit tcp any host 65.165.123.152 eq www
access-list nat permit tcp any host 65.165.123.143 eq https
access-list nat permit icmp any any
ip address outside 65.165.123.4 255.255.255.240
ip address inside 192.168.1.2 255.255.255.0
ip verify reverse-path interface outside
ip local pool clientpool 192.168.50.1-192.168.50.50
global (outside) 1 interface
nat (inside) 0 access-list 100
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp 65.165.123.142 smtp 192.168.1.56 smtp netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.142 pop3 192.168.1.56 pop3 netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 smtp 192.168.1.55 smtp netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 pop3 192.168.1.55 pop3 netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 www 192.168.1.55 www netmask 255.255.255
.255 0 0
static (inside,outside) tcp 65.165.123.152 smtp 192.168.1.76 smtp netmask 255.255.
255.255 0 0
static (inside,outside) tcp 65.165.123.152 pop3 192.168.1.76 pop3 netmask 255.255.
255.255 0 0
static (inside,outside) tcp 65.165.123.152 www 192.168.1.76 www netmask 255.255.25
5.255 0 0
static (inside,outside) tcp 65.165.123.143 https 192.168.1.55 https netmask 255.255
.255.255 0 0
access-group nat in interface outside
route outside 0.0.0.0 0.0.0.0 65.165.123.1 1
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
aaa-server plexus protocol radius
aaa-server plexus (inside) host 192.168.1.55 ******** timeout 5
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set myset esp-des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map cisco 1 set transform-set myset
crypto map dyn-map 20 ipsec-isakmp dynamic cisco
crypto map dyn-map client authentication plexus
crypto map dyn-map interface outside
isakmp enable outside
isakmp key ******** address 0.0.0.0 netmask 0.0.0.0
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
isakmp policy 40 authentication pre-share
isakmp policy 40 encryption 3des
isakmp policy 40 hash md5
isakmp policy 40 group 2
isakmp policy 40 lifetime 86400
vpngroup vpn3000 address-pool clientpool
vpngroup vpn3000 dns-server 192.168.1.55
vpngroup vpn3000 wins-server 192.168.1.55
vpngroup vpn3000 default-domain aqswdefrgt.com.sg
vpngroup vpn3000 idle-time 1800
vpngroup vpn3000 password ********
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80 -
VPN Clients cannot access remote site
Hey there,
I am pretty new in configuring Cisco devices and now I need some help.
I have 2 site here:
site A
Cisco 891
external IP: 195.xxx.yyy.zzz
VPN Gateway for Remote users
local IP: VLAN10 10.133.10.0 /23
site B
Cisco 891
external IP: 62.xxx.yyy.zzz
local IP VLAN10 10.133.34.0 /23
Those two sites are linked together with a Site-to-Site VPN. Accessing files or ressources from one site to the other is working fine while connected to the local LAN.
I configured VPN connection with Radius auth. VPN clients can connect to Site A, get an IP adress from VPN Pool (172.16.100.2-100) and can access files and servers on site A. But for some reason they cannot access ressources on site B. I already added the site B network to the ACL and when connecting with VPN it shows secured routes to 10.133.10.0 and 10.133.34.0 in the statistics. Same thing for other VPN Tunnels to ERP system.
What is missing here to make it possible to reach remote sites when connected through VPN? I had a look at the logs but could not find anything important.
Here is the config of site A
Building configuration...
Current configuration : 24257 bytes
version 15.2
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname Englerstrasse
boot-start-marker
boot config usbflash0:CVO-BOOT.CFG
boot-end-marker
aaa new-model
aaa group server radius Radius-AD
server 10.133.10.5 auth-port 1812 acct-port 1813
aaa authentication login default local
aaa authentication login ciscocp_vpn_xauth_ml_2 group Radius-AD local
aaa authorization exec default local
aaa authorization network ciscocp_vpn_group_ml_2 local
aaa session-id common
clock timezone Berlin 1 0
clock summer-time Berlin date Mar 30 2003 2:00 Oct 26 2003 3:00
crypto pki trustpoint TP-self-signed-27361994
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-27361994
revocation-check none
rsakeypair TP-self-signed-27361994
crypto pki trustpoint test_trustpoint_config_created_for_sdm
subject-name [email protected]
revocation-check crl
crypto pki certificate chain TP-self-signed-27361994
certificate self-signed 01
30820227 30820190 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
2F312D30 2B060355 04031324 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 32373336 31393934 301E170D 31323038 32373038 30343238
5A170D32 30303130 31303030 3030305A 302F312D 302B0603 55040313 24494F53
2D53656C 662D5369 676E6564 2D436572 74696669 63617465 2D323733 36313939
3430819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281 8100B709
64CE1874 BF812A9F 0B761522 892373B9 10F0BB52 6263DCDB F9877AA3 7BD34E53
BCFDA45C 2A991777 4DDC7E6B 1FCEE36C B6E35679 C4A18771 9C0F871F 38310234
2D89A4FF 37B616D8 362B3103 A8A319F2 10A72DC7 490A04AC 7955DF68 32EF9615
9E1A3B31 2A1AB243 B3ED3E35 F4AAD029 CDB1F941 5E794300 5C5EF8AE 5C890203
010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603 551D2304
18301680 14D0F5E7 D3A9311D 1675AA8F 38F064FC 4D04465E F5301D06 03551D0E
04160414 D0F5E7D3 A9311D16 75AA8F38 F064FC4D 04465EF5 300D0609 2A864886
F70D0101 05050003 818100AB 2CD4363A E5ADBFB0 943A38CB AC820801 117B52CC
20216093 79D1F777 2B3C0062 4301CF73 094B9CA5 805F585E 04CF3301 9B839DEB
14A334A2 F5A5316F C65EEF21 0B0DF3B5 F4322440 F28B984B E769876D 6EF94895
C3D5048A A4E2A180 12DF6652 176942F8 58187D7B D37B1F1A 4DDD7AE9 5189F9AF
AF3EF676 26AD3F31 D368F5
quit
crypto pki certificate chain test_trustpoint_config_created_for_sdm
no ip source-route
ip auth-proxy max-login-attempts 5
ip admission max-login-attempts 5
no ip bootp server
no ip domain lookup
ip domain name yourdomain.com
ip inspect log drop-pkt
ip inspect name CCP_MEDIUM appfw CCP_MEDIUM
ip inspect name CCP_MEDIUM ftp
ip inspect name CCP_MEDIUM h323
ip inspect name CCP_MEDIUM sip
ip inspect name CCP_MEDIUM https
ip inspect name CCP_MEDIUM icmp
ip inspect name CCP_MEDIUM netshow
ip inspect name CCP_MEDIUM rcmd
ip inspect name CCP_MEDIUM realaudio
ip inspect name CCP_MEDIUM rtsp
ip inspect name CCP_MEDIUM sqlnet
ip inspect name CCP_MEDIUM streamworks
ip inspect name CCP_MEDIUM tftp
ip inspect name CCP_MEDIUM udp
ip inspect name CCP_MEDIUM vdolive
ip inspect name CCP_MEDIUM imap reset
ip inspect name CCP_MEDIUM smtp
ip cef
no ipv6 cef
appfw policy-name CCP_MEDIUM
application im aol
service default action allow alarm
service text-chat action allow alarm
server permit name login.oscar.aol.com
server permit name toc.oscar.aol.com
server permit name oam-d09a.blue.aol.com
audit-trail on
application im msn
service default action allow alarm
service text-chat action allow alarm
server permit name messenger.hotmail.com
server permit name gateway.messenger.hotmail.com
server permit name webmessenger.msn.com
audit-trail on
application http
strict-http action allow alarm
port-misuse im action reset alarm
port-misuse p2p action reset alarm
port-misuse tunneling action allow alarm
application im yahoo
service default action allow alarm
service text-chat action allow alarm
server permit name scs.msg.yahoo.com
server permit name scsa.msg.yahoo.com
server permit name scsb.msg.yahoo.com
server permit name scsc.msg.yahoo.com
server permit name scsd.msg.yahoo.com
server permit name cs16.msg.dcn.yahoo.com
server permit name cs19.msg.dcn.yahoo.com
server permit name cs42.msg.dcn.yahoo.com
server permit name cs53.msg.dcn.yahoo.com
server permit name cs54.msg.dcn.yahoo.com
server permit name ads1.vip.scd.yahoo.com
server permit name radio1.launch.vip.dal.yahoo.com
server permit name in1.msg.vip.re2.yahoo.com
server permit name data1.my.vip.sc5.yahoo.com
server permit name address1.pim.vip.mud.yahoo.com
server permit name edit.messenger.yahoo.com
server permit name messenger.yahoo.com
server permit name http.pager.yahoo.com
server permit name privacy.yahoo.com
server permit name csa.yahoo.com
server permit name csb.yahoo.com
server permit name csc.yahoo.com
audit-trail on
parameter-map type inspect global
log dropped-packets enable
multilink bundle-name authenticated
redundancy
ip tcp synwait-time 10
class-map match-any CCP-Transactional-1
match dscp af21
match dscp af22
match dscp af23
class-map match-any CCP-Voice-1
match dscp ef
class-map match-any sdm_p2p_kazaa
match protocol fasttrack
match protocol kazaa2
class-map match-any CCP-Routing-1
match dscp cs6
class-map match-any sdm_p2p_edonkey
match protocol edonkey
class-map match-any CCP-Signaling-1
match dscp cs3
match dscp af31
class-map match-any sdm_p2p_gnutella
match protocol gnutella
class-map match-any CCP-Management-1
match dscp cs2
class-map match-any sdm_p2p_bittorrent
match protocol bittorrent
policy-map sdm-qos-test-123
class class-default
policy-map sdmappfwp2p_CCP_MEDIUM
class sdm_p2p_edonkey
class sdm_p2p_gnutella
class sdm_p2p_kazaa
class sdm_p2p_bittorrent
policy-map CCP-QoS-Policy-1
class sdm_p2p_edonkey
class sdm_p2p_gnutella
class sdm_p2p_kazaa
class sdm_p2p_bittorrent
class CCP-Voice-1
priority percent 33
class CCP-Signaling-1
bandwidth percent 5
class CCP-Routing-1
bandwidth percent 5
class CCP-Management-1
bandwidth percent 5
class CCP-Transactional-1
bandwidth percent 5
class class-default
fair-queue
random-detect
crypto ctcp port 10000
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp key REMOVED address 62.20.xxx.yyy
crypto isakmp key REMOVED address 195.243.xxx.yyy
crypto isakmp key REMOVED address 195.243.xxx.yyy
crypto isakmp key REMOVED address 83.140.xxx.yyy
crypto isakmp client configuration group VPN_local
key REMOVED
dns 10.133.10.5 10.133.10.7
wins 10.133.10.7
domain domain.de
pool SDM_POOL_2
acl 115
crypto isakmp profile ciscocp-ike-profile-1
match identity group VPN_local
client authentication list ciscocp_vpn_xauth_ml_2
isakmp authorization list ciscocp_vpn_group_ml_2
client configuration address respond
virtual-template 1
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA2 esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA3 esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA4 esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA11 esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA5 esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-DES-SHA1 esp-des esp-sha-hmac
crypto ipsec profile CiscoCP_Profile1
set transform-set ESP-3DES-SHA11
set isakmp-profile ciscocp-ike-profile-1
crypto map SDM_CMAP_1 1 ipsec-isakmp
description Tunnel to62.20.xxx.xxx
set peer 62.20.xxx.xxx
set transform-set ESP-3DES-SHA
match address 105
crypto map SDM_CMAP_1 2 ipsec-isakmp
description Tunnel to195.243.xxx.xxx
set peer 195.243.xxx.xxx
set transform-set ESP-3DES-SHA4
match address 107
crypto map SDM_CMAP_1 3 ipsec-isakmp
description Tunnel to83.140.xxx.xxx
set peer 83.140.xxx.xxx
set transform-set ESP-DES-SHA1
match address 118
interface Loopback2
ip address 192.168.10.1 255.255.254.0
interface Null0
no ip unreachables
interface FastEthernet0
switchport mode trunk
no ip address
spanning-tree portfast
interface FastEthernet1
no ip address
spanning-tree portfast
interface FastEthernet2
no ip address
spanning-tree portfast
interface FastEthernet3
no ip address
spanning-tree portfast
interface FastEthernet4
description Internal LAN
switchport access vlan 10
switchport trunk native vlan 10
no ip address
spanning-tree portfast
interface FastEthernet5
no ip address
spanning-tree portfast
interface FastEthernet6
no ip address
spanning-tree portfast
interface FastEthernet7
no ip address
spanning-tree portfast
interface FastEthernet8
description $FW_OUTSIDE$$ETH-WAN$
ip address 62.153.xxx.xxx 255.255.255.248
ip access-group 113 in
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip inspect CCP_MEDIUM out
no ip virtual-reassembly in
ip verify unicast reverse-path
duplex auto
speed auto
crypto map SDM_CMAP_1
service-policy input sdmappfwp2p_CCP_MEDIUM
service-policy output CCP-QoS-Policy-1
interface Virtual-Template1 type tunnel
ip unnumbered FastEthernet8
tunnel mode ipsec ipv4
tunnel protection ipsec profile CiscoCP_Profile1
interface GigabitEthernet0
no ip address
shutdown
duplex auto
speed auto
interface Vlan1
no ip address
interface Vlan10
description $FW_INSIDE$
ip address 10.133.10.1 255.255.254.0
ip access-group 112 in
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly in
interface Async1
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
encapsulation slip
ip local pool SDM_POOL_1 192.168.10.101 192.168.10.200
ip local pool VPN_Pool 192.168.20.2 192.168.20.100
ip local pool SDM_POOL_2 172.16.100.2 172.16.100.100
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip forward-protocol nd
ip nat inside source route-map SDM_RMAP_1 interface FastEthernet8 overload
ip route 0.0.0.0 0.0.0.0 62.153.xxx.xxx
ip access-list extended VPN1
remark VPN_Haberstrasse
remark CCP_ACL Category=4
permit ip 10.133.10.0 0.0.1.255 10.133.34.0 0.0.1.255
ip radius source-interface Vlan10
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark CCP_ACL Category=2
access-list 1 permit 10.10.10.0 0.0.0.7
access-list 23 remark CCP_ACL Category=17
access-list 23 permit 195.243.xxx.xxx
access-list 23 permit 10.133.10.0 0.0.1.255
access-list 23 permit 10.10.10.0 0.0.0.7
access-list 100 remark CCP_ACL Category=4
access-list 100 permit ip 10.133.10.0 0.0.1.255 any
access-list 101 remark CCP_ACL Category=16
access-list 101 permit udp any eq bootps any eq bootpc
access-list 101 deny ip 10.10.10.0 0.0.0.255 any
access-list 101 permit icmp any any echo-reply
access-list 101 permit icmp any any time-exceeded
access-list 101 permit icmp any any unreachable
access-list 101 deny ip 10.0.0.0 0.255.255.255 any
access-list 101 deny ip 172.16.0.0 0.15.255.255 any
access-list 101 deny ip 192.168.0.0 0.0.255.255 any
access-list 101 deny ip 127.0.0.0 0.255.255.255 any
access-list 101 deny ip host 255.255.255.255 any
access-list 101 deny ip any any
access-list 102 remark auto generated by CCP firewall configuration
access-list 102 remark CCP_ACL Category=1
access-list 102 deny ip 10.10.10.0 0.0.0.7 any
access-list 102 permit icmp any host 62.153.xxx.xxx echo-reply
access-list 102 permit icmp any host 62.153.xxx.xxx time-exceeded
access-list 102 permit icmp any host 62.153.xxx.xxx unreachable
access-list 102 deny ip 10.0.0.0 0.255.255.255 any
access-list 102 deny ip 172.16.0.0 0.15.255.255 any
access-list 102 deny ip 192.168.0.0 0.0.255.255 any
access-list 102 deny ip 127.0.0.0 0.255.255.255 any
access-list 102 deny ip host 255.255.255.255 any
access-list 102 deny ip host 0.0.0.0 any
access-list 102 deny ip any any log
access-list 103 remark auto generated by CCP firewall configuration
access-list 103 remark CCP_ACL Category=1
access-list 103 remark IPSec Rule
access-list 103 permit ip 10.133.34.0 0.0.1.255 10.133.10.0 0.0.1.255
access-list 103 remark IPSec Rule
access-list 103 permit ip 10.133.34.0 0.0.1.255 192.168.10.0 0.0.1.255
access-list 103 permit udp host 195.243.xxx.xxx host 62.153.xxx.xxx eq non500-isakmp
access-list 103 permit udp host 195.243.xxx.xxx host 62.153.xxx.xxx eq isakmp
access-list 103 permit esp host 195.243.xxx.xxx host 62.153.xxx.xxx
access-list 103 permit ahp host 195.243.xxx.xxx host 62.153.xxx.xxx
access-list 103 remark IPSec Rule
access-list 103 permit ip 10.133.20.0 0.0.0.255 10.133.10.0 0.0.1.255
access-list 103 remark IPSec Rule
access-list 103 permit ip 192.168.10.0 0.0.1.255 10.133.10.0 0.0.1.255
access-list 103 permit udp host 62.20.xxx.xxx host 62.153.xxx.xxx eq non500-isakmp
access-list 103 permit udp host 62.20.xxx.xxx host 62.153.xxx.xxx eq isakmp
access-list 103 permit esp host 62.20.xxx.xxx host 62.153.xxx.xxx
access-list 103 permit ahp host 62.20.xxx.xxx host 62.153.xxx.xxx
access-list 103 permit udp any host 62.153.xxx.xxx eq non500-isakmp
access-list 103 permit udp any host 62.153.xxx.xxx eq isakmp
access-list 103 permit esp any host 62.153.xxx.xxx
access-list 103 permit ahp any host 62.153.xxx.xxx
access-list 103 permit udp host 194.25.0.60 eq domain any
access-list 103 permit udp host 194.25.0.68 eq domain any
access-list 103 permit udp host 194.25.0.68 eq domain host 62.153.xxx.xxx
access-list 103 deny ip 10.10.10.0 0.0.0.7 any
access-list 103 permit icmp any host 62.153.xxx.xxx echo-reply
access-list 103 permit icmp any host 62.153.xxx.xxx time-exceeded
access-list 103 permit icmp any host 62.153.xxx.xxx unreachable
access-list 103 deny ip 10.0.0.0 0.255.255.255 any
access-list 103 deny ip 172.16.0.0 0.15.255.255 any
access-list 103 deny ip 192.168.0.0 0.0.255.255 any
access-list 103 deny ip 127.0.0.0 0.255.255.255 any
access-list 103 deny ip host 255.255.255.255 any
access-list 103 deny ip host 0.0.0.0 any
access-list 103 deny ip any any log
access-list 104 remark CCP_ACL Category=4
access-list 104 permit ip 10.133.10.0 0.0.1.255 any
access-list 105 remark CCP_ACL Category=4
access-list 105 remark IPSec Rule
access-list 105 permit ip 10.133.10.0 0.0.1.255 10.133.20.0 0.0.0.255
access-list 106 remark CCP_ACL Category=2
access-list 106 remark IPSec Rule
access-list 106 deny ip 192.168.10.0 0.0.1.255 10.133.34.0 0.0.1.255
access-list 106 remark IPSec Rule
access-list 106 deny ip 192.168.10.0 0.0.1.255 10.60.16.0 0.0.0.255
access-list 106 remark IPSec Rule
access-list 106 deny ip 10.133.10.0 0.0.1.255 10.60.16.0 0.0.0.255
access-list 106 remark IPSec Rule
access-list 106 deny ip 10.133.10.0 0.0.1.255 10.133.34.0 0.0.1.255
access-list 106 remark IPSec Rule
access-list 106 deny ip 10.133.10.0 0.0.1.255 10.133.20.0 0.0.0.255
access-list 106 permit ip 10.10.10.0 0.0.0.7 any
access-list 106 permit ip 10.133.10.0 0.0.1.255 any
access-list 107 remark CCP_ACL Category=4
access-list 107 remark IPSec Rule
access-list 107 permit ip 10.133.10.0 0.0.1.255 10.133.34.0 0.0.1.255
access-list 107 remark IPSec Rule
access-list 107 permit ip 192.168.10.0 0.0.1.255 10.133.34.0 0.0.1.255
access-list 108 remark Auto generated by SDM Management Access feature
access-list 108 remark CCP_ACL Category=1
access-list 108 permit tcp 10.133.10.0 0.0.1.255 host 10.133.10.1 eq telnet
access-list 108 permit tcp 10.133.10.0 0.0.1.255 host 10.133.10.1 eq 22
access-list 108 permit tcp 10.133.10.0 0.0.1.255 host 10.133.10.1 eq www
access-list 108 permit tcp 10.133.10.0 0.0.1.255 host 10.133.10.1 eq 443
access-list 108 permit tcp 10.133.10.0 0.0.1.255 host 10.133.10.1 eq cmd
access-list 108 deny tcp any host 10.133.10.1 eq telnet
access-list 108 deny tcp any host 10.133.10.1 eq 22
access-list 108 deny tcp any host 10.133.10.1 eq www
access-list 108 deny tcp any host 10.133.10.1 eq 443
access-list 108 deny tcp any host 10.133.10.1 eq cmd
access-list 108 deny udp any host 10.133.10.1 eq snmp
access-list 108 permit ip any any
access-list 109 remark CCP_ACL Category=1
access-list 109 permit ip 10.133.10.0 0.0.1.255 any
access-list 109 permit ip 10.10.10.0 0.0.0.7 any
access-list 109 permit ip 192.168.10.0 0.0.1.255 any
access-list 110 remark CCP_ACL Category=1
access-list 110 permit ip host 195.243.xxx.xxx any
access-list 110 permit ip host 84.44.xxx.xxx any
access-list 110 permit ip 10.133.10.0 0.0.1.255 any
access-list 110 permit ip 10.10.10.0 0.0.0.7 any
access-list 110 permit ip 192.168.10.0 0.0.1.255 any
access-list 111 remark CCP_ACL Category=4
access-list 111 permit ip 10.133.10.0 0.0.1.255 any
access-list 112 remark CCP_ACL Category=1
access-list 112 permit udp host 10.133.10.5 eq 1812 any
access-list 112 permit udp host 10.133.10.5 eq 1813 any
access-list 112 permit udp any host 10.133.10.1 eq non500-isakmp
access-list 112 permit udp any host 10.133.10.1 eq isakmp
access-list 112 permit esp any host 10.133.10.1
access-list 112 permit ahp any host 10.133.10.1
access-list 112 permit udp host 10.133.10.5 eq 1645 host 10.133.10.1
access-list 112 permit udp host 10.133.10.5 eq 1646 host 10.133.10.1
access-list 112 remark auto generated by CCP firewall configuration
access-list 112 permit udp host 10.133.10.5 eq 1812 host 10.133.10.1
access-list 112 permit udp host 10.133.10.5 eq 1813 host 10.133.10.1
access-list 112 permit udp host 10.133.10.7 eq domain any
access-list 112 permit udp host 10.133.10.5 eq domain any
access-list 112 deny ip 62.153.xxx.xxx 0.0.0.7 any
access-list 112 deny ip 10.10.10.0 0.0.0.7 any
access-list 112 deny ip host 255.255.255.255 any
access-list 112 deny ip 127.0.0.0 0.255.255.255 any
access-list 112 permit ip any any
access-list 113 remark CCP_ACL Category=1
access-list 113 remark IPSec Rule
access-list 113 permit ip 10.133.34.0 0.0.1.255 192.168.10.0 0.0.1.255
access-list 113 remark IPSec Rule
access-list 113 permit ip 10.60.16.0 0.0.0.255 192.168.10.0 0.0.1.255
access-list 113 remark IPSec Rule
access-list 113 permit ip 10.60.16.0 0.0.0.255 10.133.10.0 0.0.1.255
access-list 113 permit udp host 83.140.100.4 host 62.153.xxx.xxx eq non500-isakmp
access-list 113 permit udp host 83.140.100.4 host 62.153.xxx.xxx eq isakmp
access-list 113 permit esp host 83.140.100.4 host 62.153.xxx.xxx
access-list 113 permit ahp host 83.140.100.4 host 62.153.xxx.xxx
access-list 113 permit ip host 195.243.xxx.xxx host 62.153.xxx.xxx
access-list 113 permit ip host 84.44.xxx.xxx host 62.153.xxx.xxx
access-list 113 remark auto generated by CCP firewall configuration
access-list 113 permit udp host 194.25.0.60 eq domain any
access-list 113 permit udp host 194.25.0.68 eq domain any
access-list 113 permit udp host 194.25.0.68 eq domain host 62.153.xxx.xxx
access-list 113 permit udp host 194.25.0.60 eq domain host 62.153.xxx.xxx
access-list 113 permit udp any host 62.153.xxx.xxx eq non500-isakmp
access-list 113 permit udp any host 62.153.xxx.xxx eq isakmp
access-list 113 permit esp any host 62.153.xxx.xxx
access-list 113 permit ahp any host 62.153.xxx.xxx
access-list 113 permit ahp host 195.243.xxx.xxx host 62.153.xxx.xxx
access-list 113 permit esp host 195.243.xxx.xxx host 62.153.xxx.xxx
access-list 113 permit udp host 195.243.xxx.xxx host 62.153.xxx.xxx eq isakmp
access-list 113 permit udp host 195.243.xxx.xxx host 62.153.xxx.xxx eq non500-isakmp
access-list 113 remark IPSec Rule
access-list 113 permit ip 10.133.34.0 0.0.1.255 10.133.10.0 0.0.1.255
access-list 113 permit ahp host 62.20.xxx.xxx host 62.153.xxx.xxx
access-list 113 remark IPSec Rule
access-list 113 permit ip 192.168.10.0 0.0.1.255 10.133.10.0 0.0.1.255
access-list 113 permit esp host 62.20.xxx.xxx host 62.153.xxx.xxx
access-list 113 permit udp host 62.20.xxx.xxx host 62.153.xxx.xxx eq isakmp
access-list 113 permit udp host 62.20.xxx.xxx host 62.153.xxx.xxx eq non500-isakmp
access-list 113 remark IPSec Rule
access-list 113 permit ip 10.133.20.0 0.0.0.255 10.133.10.0 0.0.1.255
access-list 113 remark Pop3
access-list 113 permit tcp host 82.127.xxx.xxx eq 8080 host 62.153.xxx.xxx
access-list 113 remark Pop3
access-list 113 permit tcp any eq pop3 host 62.153.xxx.xxx
access-list 113 remark SMTP
access-list 113 permit tcp any eq 465 host 62.153.xxx.xxx
access-list 113 remark IMAP
access-list 113 permit tcp any eq 587 host 62.153.xxx.xxx
access-list 113 deny ip 10.133.10.0 0.0.1.255 any
access-list 113 deny ip 10.10.10.0 0.0.0.7 any
access-list 113 permit icmp any host 62.153.xxx.xxx echo-reply
access-list 113 permit icmp any host 62.153.xxx.xxx time-exceeded
access-list 113 permit icmp any host 62.153.xxx.xxx unreachable
access-list 113 deny ip 10.0.0.0 0.255.255.255 any
access-list 113 deny ip 172.16.0.0 0.15.255.255 any
access-list 113 deny ip 192.168.0.0 0.0.255.255 any
access-list 113 deny ip 127.0.0.0 0.255.255.255 any
access-list 113 deny ip host 255.255.255.255 any
access-list 113 deny ip host 0.0.0.0 any
access-list 113 deny ip any any log
access-list 114 remark auto generated by CCP firewall configuration
access-list 114 remark CCP_ACL Category=1
access-list 114 deny ip 10.133.10.0 0.0.1.255 any
access-list 114 deny ip 10.10.10.0 0.0.0.7 any
access-list 114 permit icmp any any echo-reply
access-list 114 permit icmp any any time-exceeded
access-list 114 permit icmp any any unreachable
access-list 114 deny ip 10.0.0.0 0.255.255.255 any
access-list 114 deny ip 172.16.0.0 0.15.255.255 any
access-list 114 deny ip 192.168.0.0 0.0.255.255 any
access-list 114 deny ip 127.0.0.0 0.255.255.255 any
access-list 114 deny ip host 255.255.255.255 any
access-list 114 deny ip host 0.0.0.0 any
access-list 114 deny ip any any log
access-list 115 remark VPN_Sub
access-list 115 remark CCP_ACL Category=5
access-list 115 permit ip 10.133.10.0 0.0.1.255 172.16.0.0 0.0.255.255
access-list 115 permit ip 10.133.34.0 0.0.1.255 172.16.0.0 0.0.255.255
access-list 115 permit ip 10.133.20.0 0.0.0.255 any
access-list 116 remark CCP_ACL Category=4
access-list 116 remark IPSec Rule
access-list 116 permit ip 10.133.10.0 0.0.1.255 10.60.16.0 0.0.0.255
access-list 117 remark CCP_ACL Category=4
access-list 117 remark IPSec Rule
access-list 117 permit ip 10.133.10.0 0.0.1.255 10.60.16.0 0.0.0.255
access-list 118 remark CCP_ACL Category=4
access-list 118 remark IPSec Rule
access-list 118 permit ip 10.133.10.0 0.0.1.255 10.60.16.0 0.0.0.255
access-list 118 remark IPSec Rule
access-list 118 permit ip 192.168.10.0 0.0.1.255 10.60.16.0 0.0.0.255
no cdp run
route-map SDM_RMAP_1 permit 1
match ip address 106
control-plane
mgcp profile default
line con 0
transport output telnet
line 1
modem InOut
speed 115200
flowcontrol hardware
line aux 0
transport output telnet
line vty 0 4
session-timeout 45
access-class 110 in
transport input telnet ssh
line vty 5 15
access-class 109 in
transport input telnet ssh
scheduler interval 500
endThe crypto ACL for the site to site vpn should also include the vpn client pool, otherwise, traffic from the vpn client does not match the interesting traffic for the site to site vpn.
On Site A:
should include "access-list 107 permit ip 172.16.100.0 0.0.0.255 10.133.34.0 0.0.1.255"
You should also remove the following line as the pool is incorrect:
access-list 107 permit ip 192.168.10.0 0.0.1.255 10.133.34.0 0.0.1.255
On Site B:
should include: permit ip 10.133.34.0 0.0.1.255 172.16.100.0 0.0.0.255"
NAT exemption on site B should also be configured with deny on the above ACL. -
I have gotten the problem after updated IOS to version 7.0.2. I signed up my IPhone with su* @pttplc.com as Apple ID via older IOS version and can use it normally but after I update the IOS version from 6.0 to 7.0.2, the Apple ID that commented on my IPhone is sx* @pxxxxx.com. It look like that the number of alphabet in Apple Id is not matched. The new one is less than the old one so I cannot log in my IPhone. After that I try asking for the new password but the new password was not send to su* @pttplc.com but send to my reserve e-mail instead. Please help me to fix the problem ASAP due to I cannot access IPhone for 2 month already.
Please suggest the solution to reset my IPhone to normal. Please advise ASAP. Thanks in advance.
PS. If you want any further information, please do not hesitate to let me know.
<Email Edited by Host>Hey Suwat Chanpui,
Thanks for the question. I understand you are having issue relating to your Apple ID account after updating to iOS 7. The following articles may help to resolve your issue:
iCloud: "Incorrect Apple ID or Password" alert when setting up iCloud after upgrading to iOS 7
http://support.apple.com/kb/TS5207
If you recently changed your Apple ID and did not update your Apple ID on your device:
1. Tap Skip This Step to continue.
2. After completing iOS 7 setup, go to Settings > iCloud.
3. Scroll down and tap Delete Account, then enter your previous Apple ID and password.
4. If your Apple ID or password are not accepted, follow the steps in iOS 7: If you're asked for your previous Apple ID when signing out of iCloud.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
https://support.apple.com/kb/TS5223
3. Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't work, try these steps:
1. Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
2. Tap Settings > iCloud and try to sign out.
3. Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
4. Tap Settings > iCloud and sign in with the new Apple ID.
If you are instead experiencing issues with Activation Lock, the following articles may help to resolve your issue:
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/TS4515
Thanks,
Matt M. -
Cannot access internal LAN after VPN connect
I know this is either an ACL or NAT issue that I cannot figure out. The nat-t config in defaulted in the IOS config for the ASA. I actually forgot the command to show the hidden default config lines. Either way, can someone take a look at my config, and let me know what I am doing wrong, again.
Thanks ahead of time.
ASA Version 8.2(2)
hostname ciscousa
enable password
names
interface Vlan1
nameif inside
security-level 100
ip address 1.1.1.2 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 14.14.11.5 255.255.255.0
interface Vlan3
shutdown
no forward interface Vlan2
nameif dmz
security-level 50
ip address dhcp
interface Ethernet0/0
switchport access vlan 2
speed 100
duplex full
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
speed 100
duplex full
ftp mode passive
same-security-traffic permit intra-interface
access-list outside_in extended permit icmp any any
access-list inside_nat0 extended permit ip any 1.1.1.0 255.255.255.0
access-list inside_nat0 extended permit ip any 10.12.27.0 255.255.255.0
access-list split_tunnel standard permit 1.1.1.0 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
ip local pool vpnpool 10.12.27.100-10.12.27.120 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0
nat (inside) 1 0.0.0.0 0.0.0.0
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 14.14.11.6 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 1.1.1.0 255.255.255.0 inside
http 1.1.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map inet-1_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map inet-1_map 65535 ipsec-isakmp dynamic inet-1_dyn_map
crypto map inet-1_map interface outside
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
management-access inside
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy vpnipsec internal
group-policy vpnipsec attributes
wins-server value 1.1.1.16
dns-server value 1.1.1.16
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split_tunnel
default-domain value company.com
tunnel-group vpnipsec type remote-access
tunnel-group vpnipsec general-attributes
address-pool vpnpool
default-group-policy vpnipsec
tunnel-group vpnipsec ipsec-attributes
pre-shared-key *****
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512Hello,
I have been trying to get this to work within the last week but to no avail. I changed my config altogether and started from scratch. I have Split Tunnel working well, and I can access the VPN client from the internal LAN. But I still cannot access the internal LAN from the VPN client host. Can anyone take a look at my config and tell me what ACL\Access Group I am missing. I know I am close but I cannot get over the hump.
Thanks!
ASA Version 8.2(2)
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.2 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address xxx.xxx.xxx.xxx 255.255.255.0
interface Vlan3
shutdown
no forward interface Vlan2
nameif dmz
security-level 50
ip address dhcp
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
speed 100
duplex full
interface Ethernet0/4
interface Ethernet0/5
switchport access vlan 3
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
access-list outside_in extended permit icmp any any
access-list outside_in_vpn extended permit ip 192.168.3.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.0.0 192.168.0.0 255.255.0.0
access-list split_tunnel standard permit 192.168.0.0 255.255.0.0
access-list split_tunnel standard permit 192.168.1.0 255.255.255.0
access-list inside_access_in extended permit ip any any
access-list outside_access_in extended permit ip any any
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
ip local pool ipvpn 192.168.3.100-192.168.3.200 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
access-group inside_access_in in interface inside
access-group outside_in in interface outside control-plane
access-group outside_in_vpn in interface outside
route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xx 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map internet-1_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHAESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map internet-1_map 65535 ipsec-isakmp dynamic internet-1_dyn_map
crypto map internet-1_map interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto isakmp identity address
crypto isakmp enable inside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
management-access inside
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DfltGrpPolicy attributes
group-policy vpnipsec internal
group-policy vpnipsec attributes
wins-server value 192.168.1.5
dns-server value 192.168.1.5
split-tunnel-policy tunnelall
split-tunnel-network-list value split_tunnel
default-domain value company.com
tunnel-group vpnipsec type remote-access
tunnel-group vpnipsec general-attributes
address-pool ipvpn
default-group-policy vpnipsec
tunnel-group vpnipsec ipsec-attributes
pre-shared-key *
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
prompt hostname context
Cryptochecksum:7e41045c9d7c66ac2c03c3b12ae63908 -
WRT310N 1.0.0.6 after 1 min cannot access 192.168.1.1
hi, i need help i giot this brand new linksys router... the router adress is 192.168.1.1 i can ping it , but i cannot access the webpage .... ether in firefox / opera or explorer , to access it i need to power it down and power it back up (unplug it and plug it back) ... then i can access the config page for 1 minute then it stop working ..
C:\Users\veknos>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Salon
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit Ether
net Controller
Physical Address. . . . . . . . . : 00-22-15-26-FA-67
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::e850:1f72:3d7b:eb03%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.103(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Saturday, January 03, 2009 9:44:24 PM
Lease Expires . . . . . . . . . . : Sunday, January 04, 2009 9:44:23 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 24.200.241.37
24.201.245.77
24.200.243.189
NetBIOS over Tcpip. . . . . . . . : Enabled
this is my ipconfifg ..
please help!I am pretty sure it doesn't work with Firefox.
I have been getting the same problem as you with Internet Explorer. "The adress is valid but will not connect" kind of error.
Having to reboot the whole router (messing 2-3 other connections) to adjust some settings is quite frustrating, I know.
Let me know if you find what causes this and how to solve it
Jonathan -
I am working with a client who is attempting to backup to a NAS device
The device is a linksys NSS6000 (Cisco device).
It’s a dual 1Gbit LAN device that supports CIFS / FTP and NFS transfers. It has only 1Gbit lan connected.
The device has 4 * 500 gb sata drives in raid 1 attached.
Cables go from cat 5 to fiber back to cat5. (The NAS is located at a neighboring office) The switches are 1gbit.
Server is a win2k8r1 fully up to date.
When backing up to the NAS device, the following error occurs:
Running backup of volume Local Disk(D:), copied (86%).
Running backup of volume Local Disk(D:), copied (90%).
Running backup of volume Local Disk(D:), copied (94%).
Running backup of volume Local Disk(D:), copied (98%).
Backup of volume Local Disk(D:) completed successfully.
Backup stopped before completing.
Summary of backup:
Backup stopped before completing.
The process cannot access the file because it is being used by another process.
If we redirect the backup to a folder on a 2008 share, the backup completes successfully.
Only when backing up to the linksys NSS6000 does the error occur.
No other backup processes are writing to the NAS device so I can't understand why the process thinks the file is
being used by another process.
One thing we did notice that when the backup to the NAS device occurs, throughput is about 150 mbit average
On the 2008 server shares we successfully backup to, the through put is 500 mbit. Not sure if that is important, but
might be worth mentioning.
The following event log entry was noted at the end of the backup.
The description for Event ID '519' in Source 'Microsoft-Windows-Backup' cannot be found.
The local computer may not have the necessary registry information or message DLL files to display the message,
or you may not have permission to access them. The following information is part of the
event:'2009-05-12T10:13:31.617Z', '', '2147942432', '%%2147942432'
Any ideas?
Thanks..MichaelI am also seeing the same problem backing up nightly to a brand new NAS device (WD My Book Live)
All the error codes are the same as those in this thread.
From Windows Event Viewer:
The backup operation that started at '2011-03-25T06:00:19.811302700Z' has failed with following error code '2147942432' (The process cannot access the file because it is being used by another process.). Please review the event details
for a solution, and then rerun the backup operation once the issue is resolved.
Fault bucket 659897467, type 5
Event Name: WindowsBackupFailure
Response: Not available
Cab Id: 0
Problem signature:
P1: Backup
P2: 6.1.7600
P3: 0x80070020
P4: 7
P5:
P6:
P7:
P8:
P9:
P10:
Attached files:
C:\Windows\Logs\WindowsBackup\WindowsBackup.1.etl
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_Backup_6957d65de91fc4a853ecc7c78914bf7351fff0d1_14578325
Analysis symbol:
Rechecking for solution: 0
Report Id: dd480bf2-56a6-11e0-ae81-00217099bf56
Report Status: 0
From Report.wer in C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_Backup_6957d65de91fc4a853ecc7c78914bf7351fff0d1_14578325
Version=1
EventType=WindowsBackupFailure
EventTime=129455071508181139
Consent=1
UploadTime=129455071508201140
ReportIdentifier=dd480bf2-56a6-11e0-ae81-00217099bf56
Response.BucketId=659897467
Response.BucketTable=5
Response.type=4
Sig[0].Name=Operation
Sig[0].Value=Backup
Sig[1].Name=AppVer
Sig[1].Value=6.1.7600
Sig[2].Name=HRESULT
Sig[2].Value=0x80070020
Sig[3].Name=TargetType
Sig[3].Value=7
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7600.2.0.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
State[0].Key=Transport.DoneStage1
State[0].Value=1
State[1].Key=DataRequest
State[1].Value=Bucket=659897467/nBucketTable=5/nResponse=1/n
FriendlyEventName=WindowsBackupFailure
ConsentKey=WindowsBackupFailure
AppName=Windows host process (Rundll32)
AppPath=C:\Windows\System32\rundll32.exe
ReportDescription=Windows Backup failure
Maybe you are looking for
-
No sound when running Windows, after installing Windows 7 Ultimate 64 bit-Macbook Pro
As the title states I can't get any sound, no matter what configuration I try, when I run Windows. I used the latest version of Lion and the latest version of Bootcamp when installing Windows 7 via bootcamp. I have completed all available Windows upd
-
Saving Multi Page PDF document
On Photoshop CC 2014, I've got a psd document that includes 4 groups. I'm trying to save it to a multi page PDF document. When I save through File : Automate : PDF Presentation, I always end up with only one page instead of four in my multi page do
-
Oracle.dbtools.db.DBUtil error
hi there!!! Recently i am getting the following errors in SQL Developer and as a result of that i am not able to view data in the table property "Data tab". If i run a query it shows the data but not in table object. Your help will be highly apprecia
-
I've just added Gaussian Blur to 6 stills in the timeline. When I try to Render Effects in the Work Area I get a panel saying Error Compiling Movie. Unknown Error. Premiere Pro is runnung very low on system memory. Please close your project and proc
-
Windows 8 Update to Windows 8.1 Issue
HI I have try to update the windows from 8 to 8. When I click on update download its showing as downloading and shows 0%. I have waited for 4 hrs but the status was the same. Kindly provide a solution for the same. I am using windows 8 pro version. E