Cannot Accessing ACR in CS6 Bridge

Open Bridge, click on ACR, dialog box give following message: Bridge's application is not active; Bridge requires that a qualifying product has been launched at least once to enable this feature. Does anyone have a solution?

I have done that, but it still does not find folders. Specifically, let's say folders within folders. I mentioned that I can find places, such as desktop, but it won't find 'folders' on my desktop. Just indivdual files. Here is a screen shot of what I mean. On my desk top, I happen to have a folder of assets, but it is not finding it when I have 'desk top' highlighted in the navigation. This is a problem that there seems to be now answer for.

Similar Messages

Cannot access some folders from Bridge CS6

Only certain folders on my internal drive can't be accessed from Bridge.
I can access the folders from PS CS6 but from Bridge, files cannot be displayed.

Not sure where to look to ensure a folder is both read & write permission. Focusing on one of the folders which suddenly I can't access from Bridge - Pictures; if I use Finder all pics are visible from the folder. If I open a file from the folder in Photoshop I can edit and save in the Pictures folder.
Select a folder in the finder and choose cmd + i or use menu File / show info. This provides a window and at the bottom it shows the permissions that are set. If you are the user and have administrator privileges (meaning you you have access with password to the account and are able to install and uninstall applications) it should sat for both system and administrator 'read and write'
Only from Bridge are certain folders inaccessable....in Bridge the folder has a red circle with white - and message 'no items to display'
This is getting a bit tricky. If you have jpeg or raw files in the picture folder that also show in the Finder Bridge should display them without problems. If you try to visualize a library form iPhoto or Aperture this will not be able in Bridge because those files are packages.

Cannot update acr 7.4 Bridge CS6 5.0.2 etc error code U43M1D207

Buy the genuine photoshop cs 6, but can install these updates. Can't find any problems. And the error code is all U43M1D207. I've reinstallede the PS CS6 and Adobe app manager 7.0, but the problems still can not be settled!
Adobe Bridge CS6 5.0.2 更新
下载此更新时出现错误。请退出并稍后重试。错误代码: U43M1D207
Adobe CSXS InfrastructureCS6
下载此更新时出现错误。请退出并稍后重试。错误代码: U43M1D207
Adobe Bridge CS6 5.0.2 更新
下载此更新时出现错误。请退出并稍后重试。错误代码: U43M1D207
Dynamic Link Media Server CS6 1.0.1 更新
下载此更新时出现错误。请退出并稍后重试。错误代码: U43M1D207
Photoshop Camera Raw 7.4 更新
下载此更新时出现错误。请退出并稍后重试。错误代码: U43M1D207
Extension Manager 6.0.5 更新
下载此更新时出现错误。请退出并稍后重试。错误代码: U43M1D207

Hi yychips,
Have you tried installing the updates manually?
You can search for the latest updates on this page: http://www.adobe.com/downloads/updates/

Added premiere pro cc to photoshop membership but cannot access encore in cs6

I phoned adobe and asked as a photoshop creative cloud member if I purchased premiere pro cc as a single monthly app if I would have access to encore and she said yes. I have paid for prem.cc and in manage applications in creative cloud photoshop cc is greyed out. So premiere pro is not much use if I cannot write to dvd. Anyone help please

CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help
-Encore instructions http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
The bottom section of the tutorial link above has several Adobe links, and other information, on downloading Premiere Pro CS6 and the bundled Encore CS6, and https://helpx.adobe.com/encore/using/download-library-content.html for the Encore library content... and the tutorial list includes learning how to use Encore... pay particular attention to the picture in reply 3 at this link - https://forums.adobe.com/thread/1516173 (picture first posted by Ann Bens and reposted by Stan Jones)

Cannot open ACR preferences in bridge

I get the 'qualifying product' error. I have updated it to the latest ACR, opened PS4 first, and luanched bridge from there...all with no luck.
Is tehre a dead link somewhere that needs to be fixed? ACR is in the right folder and everything.
I have tried everything i can find online and here in the forums. Any other ideas?

Hello, and welcome to the forum, Ludwig.
It seems that you missed both the readme ( http://www.adobe.com/special/photoshop/camera_raw/Camera_Raw_5.3_ReadMe.pdf ), or the detailed instructions on the bottom on the very page where you downloaded the update: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4365
The correct location is: Program Files\Common Files\Adobe\Plug-Ins\CS4\File Formats . You will need to remove the other copy from the Photoshop tree.
Please post this information on the other forums where you also saw unresponded questions on the same topic, so that you can help others!

Cannot access DSL modem in bridge mode w/ Airport Extreme

Hi
I have the following setup:
DSL Modem: Used in bridge mode + NAT/DHCP/Firewall turned off. Static IP is set to 192.168.2.1
Airport Extreme: In PPPOE mode with Shared IP (which is selected by default): Distributes IP range 192.168.1.X with subnet 255.255.255.0. At this point, Airport Extreme's IP address is what it gets from the ISP, basically DSL Modem is passing thru' this to the AE.
Ethernet cable is running from DSL modem to AE's WAN.
In this mode, everything works fine and me and all others can use Internet fine...
But the problem is that I can't ping/ access DSL modem at all in this mode. Basically, I need to login to the DSL modem to monitor my DSL connection quality (SNR, Attenuation, etc.) but whatever I tried I could not figure out how.
Basically, I tried setting a static IP on the DSL modem as 192.168.1.3, this did not work. I read somewhere that it needs to be on a different subnet, so tried using 192.168.2.1, that did not work either.
If I connect the DSL modem to a machine directly and set that machine's IP to 192.168.2.10, it can connect to the DSL modem, but there is no way I could access this DSL modem from the setup I explained above.
I am simply out of solutions at this point and any idea would be appreciated.
Thanks a ton!

What you are asking about is generally possible but probably not with an Airport Extreme. As others have noted you SHOULD be able to access a DSL modem in bridge mode via it's "lan" IP address if you directly attach a cable to it and configure your computer with appropriate static IP settings (I'm assuming that in bridge mode the DSL modem has it's DHCP server disabled).
This approach can also be achieve through a router with sufficiently flexible configuration options (e.g. openwrt open-source firmware). Basically the router attaches its WAN port to the modem like usual. Then the router is configured to do PPPOE via the WAN port while SIMULTANEOUSLY assigning the WAN port a static IP address that can connect to the modem's LAN address. Finally the router firewall must be configured to pass traffic from the DSL modem LAN IP back to the network.
So your intuition suggesting that this should be possible is absolutely right. However; you can probably also see from the steps required why most modems simply (incorrectly) document that it isn't possible.
Here's a link with some gory details on achieving this with an openwrt-based router: https://forum.openwrt.org/viewtopic.php?id=10952

Cannot access mpeg in CS6.0.2 Adobe media Encoder. Have done clean reinstall and update still no luck.

I am running SC6.0.2 AME in several Mac Pro towers running 10.6.8. CS5 media encoder is fine with mpeg but cant get it to work in CS6. The mpeg option in the preset browser will not bring up the export settings dialog. The update from 6.0 to 6.1 was touted as a fix for this but it doesn't work. How can I get this to work?

https://www.youtube.com/watch?v=oJ0hz9JkLgM

ACR link from Bridge Missing

After I installed the latest version of ACR (4.4), I found that I could not access ACR directly from Bridge any more. The "Open in Camera Raw" was "grayed out". I removed V4.4 and reinstalled 4.3.1. Still could not access ACR directly. ACR opened in CS3 fine.
Some other strange thing happened in Bridge after installing V4.4, but they were corrected after I re-ran the start up disk and had it "re-install CS3". But, the above problem still existed.
Any ideas, any body?
Sam Gay
St Augustine FL

Thank for the help, that wasn't the problem, but it put me in the right ballpark. ACR was not in the corrct sub-folder.
Thanks again

ACR link from Bridge

I was going to post this in the Bridge Forum, but apparently nobody reads that forum.
After I installed the latest version of ACR (4.4), I found that I could not access ACR directly from Bridge any more. The "Open in Camera Raw" was "grayed out". I removed V4.4 and reinstalled 4.3.1. Still could not access ACR directly. ACR opened in CS3 fine.
Some other strange thing happened in Bridge after installing V4.4, but they were corrected after I re-ran the start up disk and had it "re-install CS3". But, the above problem still existed.
Any ideas, any body?
Sam Gay
St Augustine FL

Problem solved, ACR installed in the wrong place!

Started having issues with camera raw. cannot access from bridge. Greyed out.

Started having issues with accessing camera raw from bridge. I have CS6 and LR5. Should I attempt to uninstall CS6 and reinstall. I have backup on external hard drive for my photos but will I need to reimport photos after uninstall? Some of the forums are suggesting that my program might be corrupt. Can anyone assist?

This should solve problem. http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html

I uninstalled Adobe Acrobat Pro due to Windows 8 malfunction with starting up. I am trying to reinstall as I am an owner of the Creative Suite CS6 and I cannot access my serial number. I purchased the software in 2013 and never registered i, apparently. W

I uninstalled Adobe Acrobat Pro due to Windows 8 malfunction with starting up. I am trying to reinstall as I am an owner of the Creative Suite CS6 and I cannot access my serial number. I purchased the software in 2013 and never registered i, apparently. When directed on Adobe's site to access the serial number, it takes me to an outside 3rd party site, which I tried but it does not actually work. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hey beccac85068042,
Adobe will provide you the serial number only if you are a registered user.
Please refer the following link to know more on registration for Adobe products:
Adobe product registration FAQ
You might Contact Customer Care and seek help on the same.
Regards,
Anubha

Cannot access Adobe Folio Builder using Indesign (CS6) on Windows 7, error message is 'An error has occured while trying to sign in to the Folio Builder Panel' [IMS_ERROR_FAILURE]

Cannot access Adobe Folio Builder using Indesign (CS6) on Windows 7, error message is 'An error has occured while trying to sign in to the Folio Builder Panel' [IMS_ERROR_FAILURE]

Yes, I can open the DPS portal via the Folio Builder panel within InDesign. Although I have created Folios locally within InDesign CS6, the DPS portal is empty and everthing greyed out with just the text "There are no folios to display. Create folios with the folio builder in InDesign".
If I try to sign in within the Folio Builder panel in InDesign, I get the error message [IMS_ERROR_FAILURE] . In addition I am also not able to access the "Help" menu from within InDesign although I am connected to the internet.
To complicate it even further, I am working in the UK whereas all internet control (firewall) and licences are handeled by head office in Germany. I am not sure if this is a firwewall issue or not but if the IT department in Germany could get support from Adobe to understand the access requirements, this may help.
Hopefully using the forum someone out there will know the answer.

Cannot open CS6 Bridge. Always the same ERROR: Bridge has a problem and cannot read the cache

Cannot open CS6 Bridge. Always the same ERROR: Bridge has a problem and cannot read the cache

Try this. This is for CS6 but substitue CC and Bridge 6.
~library/caches/Adobe/Bridge CS6 and inhere should be 2 files:
Adobe Bridge Plug-in Cache
and the folder called Cache. Inhere should be 4 folders called '254', '1024', 'data' and 'full'
All those folders carry the content of the respective quality of the thumbs and preview as well as 100 % cache and Bridge database.
Any way, Since you have not used Bridge you have no relevant amount of cache and I would suggest you quit both PS and Bridge and manual delete both the items (plug in and folder called cache at the end of the Bridge CS6 path mentioned above.
(both files will refresh itself after a restart of Bridge).
To be on the save side also visit in same user library the folder Preferences and look for the file called "com.adobe.bridge5.plist" (yes it is Bridge 5 that comes with CS6, all Adobe apps have their own version number and they are presented in the same Suite version. CS6 has PS version 13 and Bridge version 5 )
also drag this file to the trash.
Then hold down option key (alt) while starting Bridge and this should give you the option to reset the preferences as mentioned earlier in this thread.
Choose reset prefs and try again.

I cannot access my /User/Dennis/Pictures folder from Bridge

I has the CS3 Suite, I am trying to see some files in the above path on my C: Drive, but for some reason I cannot access thru Bridge.
If I go to PS and choose File/Open then I can navigate to that folder and open files, but I really would liket to do so with Bridge so I can open images in Camera Raw.
I've checked all my folder settings I could think of to ensure access to all, but that did not make that folder even 'visible' in Bridge.
Any words of wisdom?
Thanks
Dennis

No. I did pull some folders in from an external Raid drive onto
my C: \Users\Dennis which was already on my C: Drive forever.
There are 3 Folders under User, 1)Default, 2)Dennis 3)Public and the only one Bridge finds is the Public Folder.

Cannot open acr in bridge.

Cannot open ACR in bridge. But im able to in photoshop using mini bridge only. keep getting a prompt saying "Bridge requires that a qualifying product has been launched at least once to enable this feature. Running windows 7 64bit. never had this issue with CS5. Can someone help?

This is a workaround rather than a cure............................. for cs5 users............
If you are unable to open .jpg files in adobe Camera RAW from Bridge and the Preferences have been set correctly in Photoshop Preferences, and all avenues have been exhausted or you are getting the error message in Bridge when you right click, or ctrl + r, or go to the ‘Open in Camera RAW’ button at the top of Bridge and also Getting the error message :
‘Camera Raw Editing Is not Enabled, Camera Raw Editing Requires that a Qualifying Product has been Launched at least once to Enable this Feature’
And Bridge does open up RAW files OK
Try this
1. In bridge, hit the ctrl + Alt key together and double click the .JPG image, this should open in Camera RAW (but only the one image clicked, not multiple files.
or
2. Open Photoshop
Go to File.....
Browse in MIniBridge.........
Browse for folder containing images..............
Find image, right click and open in camera RAW
(if you wish to open multiple files, when a number of images have been selected, the Camera Raw menu disappears when you right click), however, hold down the Alt + Crtl key together (Windows) and double click any of the highlighted images, they will all open in Camera RAW as they should do.

Cannot Accessing ACR in CS6 Bridge

Similar Messages

Maybe you are looking for