Cannot add a new entrie with aisuser!! help urgent

hi,
i'm trying to add new entrie for assign a S-user with trasax AISUSER, but without succès.
i have this message:
Partner 000123456(my suser) not found.
Partner 0001068365 not found - see longtext
Message no. AI_SC_EN093
Diagnosis
Partner number 0001068365 was not found in table AICONTACTS.
Procedure
Please check if you entered the correct number (S-User without S) or use the value help for this field. If the value help doesn't provide any data the report AI_SC_REFRESH_READ_ONLY_DATA has not been run yet. It should be scheduled daily with transaction SM_CONFIG_JOBS as job REFRESH_ADMIN_DATA_FROM_SUPPORT. However if you want to run this job successfully the user who created the job must be maintained in this table first. So you should ignore the warning for this purpose, maintain the partner for this user and continue maintaining this table after the job has fetched the contact data for the value help from SAP Support Portal successfully.
Even then it can happen, that you don't find the partner number in the value help. The reason for this may be, that the user doesn't have enough authorizations for some actions, since only users with certaine authorizations are downloaded from SAP Support Portal. So you also may ignore the warning in this case, as long as there is no typo in the partner number.
i have do all that, but i have usullay the same problem.
thanks for your help
Hassan

Daniel,
Go ahead and Apply this note , it will fix your issue.
Do you have a third column in AISUSER T.Code .
This issue is fixed in ST : SAPKITL426
Note 1140822 - SAP customer number for installation number &1 unknown
Thanks,
Uday

Similar Messages

  • I have iphone 4 and upgraded to IOS 5 software, now I cannot add any new contacts.  Please help

    I have an iphone 4 and have updated to IOS 5 software a couple of days ago.  I cannot add any new contacts or add anything to the calander.  Can anyone help?

    Have you tried a Reset...
    Some Users have reported that a Restore has Resolved Issues after the Upgrade...
    If a Restart and a Reset do not help... Try a Restore from Backup... if the issue persists Restore as New...
    iPhone Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    Backup and Set Up as New Device
    http://support.apple.com/kb/HT4137

  • Cannot create and add a new entry to LDAP

    Hi,
    I'm pretty new at LDAP and JNDI, i've been trying to create and add a new entry to the directory but somehow it's not working.
    here is my code and I would appreciate it if someone can help.
    import java.util.Hashtable;
    import javax.naming.ldap.*;
    import javax.naming.directory.*;
    import javax.naming.*;
    import javax.net.ssl.*;
    import java.io.*;
    public class Newuser
         public static void main (String[] args)
              //LDAPEntry myEntry = new LDAPEntry();
              Hashtable<String, String> env = new Hashtable<String, String>(11);
              String adminName = "CN=ldap_admin,o=JNDITutorial,dc=img,dc=org";
              String adminPassword = "secret";
              env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
              //set security credentials, note using simple cleartext authentication
              env.put(Context.SECURITY_AUTHENTICATION,"simple");
              env.put(Context.SECURITY_PRINCIPAL,adminName);
              env.put(Context.SECURITY_CREDENTIALS,adminPassword);
              //connect to my domain controller
              env.put(Context.PROVIDER_URL, "ldap://localhost:389/o=JNDITutorial,dc=img,dc=org");
                   // Create the initial directory context
                   //JNDILDAPConnectionManager jndiManager = new JNDILDAPConnectionManagerImpl();
                  try{
                       DirContext ctx = new InitialDirContext(env);
                        System.out.println("Connection to LDAP server done" );
                       final String groupDN ="ou=people,o=JNDITutorial,dc=img,dc=org";
                      //DirContext dirCtx = jndiManager.getLDAPDirContext();
                      People people = new People("Thiru","Thiru","Thiru Ganesh","Ramalingam","ou=people","[email protected]");
                      // The Common name must be equal in Attributes common Name
                      ctx.bind("cn=Thiru," + groupDN, people);
                      System.out.println("** Entry added **");
                      //jndiManager.disConnectLDAPConnection(ctx);
                  }catch(NamingException exception){
                      System.out.println("**** Error ****");
                      exception.printStackTrace();
                      System.exit(0);
    }here is the Object class People that i'm trying to instantiate
    public class People implements DirContext {
         public People(String uid,String cn,String givenname,String sn,String ou,String mail) {
        BasicAttributes myAttrs = new BasicAttributes(true);  //Basic Attributes
        Attribute objectClass = new BasicAttribute("objectclass"); //Adding Object Classes
        objectClass.add("inetOrgPerson");
        /*objectClass.add("organizationalPerson");
        objectClass.add("person");
        objectClass.add("top");*/
        Attribute ouSet = new BasicAttribute("ou");
        ouSet.add("people");
        ouSet.add(ou);
        myAttrs.put(objectClass);
        myAttrs.put(ouSet);
        myAttrs.put("cn",cn);
        myAttrs.put("sn",sn);
        myAttrs.put("mail",mail);
    ...the message i keep getting is:
    javax.naming.directory.SchemaViolationException: [LDAP: error code 65 - entry has no objectClass attribute]
    the thing is that I can create and add a new entry in openLDAP from the console and it works.
    and here is how I proceed
    I create a text file: new.txt
    dn:cn=Hamido Saddo,ou=People,o=JNDITutorial,dc=img,dc=org
    cn:Hamido Saddo
    mail:[email protected]
    telephonenumber:3838393038703
    sn:hamdio
    objectclass:top
    objectclass:person
    objectclass:organizationalPerson
    objectclass:inetOrgPersonand i use this command to add the entry:
    ldapadd -D "cn=ldap_admin,O=JNDITutorial,dc=img,dc=org" -W -f new.txtand everything works, i get no errors.
    does anyone has a clue maybe???

    You must have an IMAP email account in order to add additional folders on the iPad mail app.
    If you go to your email account in the Mail app and look at the window where your inbox, trash folder and sent folder are - if there is an Edit button at the top of the window - tap that and then tap Add Mailbox at the bottom.
    If the Edit button is not there - you cannot create folders on the iPad. Your email account is not IMAP. Only IMAP email accounts can create folders on the iPad. Any folders that you would already have in an IMAP account would sync to the device as well.

  • Cannot add a new playlist to my iphone - Help!!!

    I am not able to add a new playlist to my iphone.  I recently changed my computer, and when I choose the option to manually manage my music, I get a message that my phone is synced to a different itunes library, and if I sync to this library my content will be erased.  Obviously I did not continue.  I authorized this computer (which I had not done before), but I still cannot add a new playlist.  What can I do?

    I found this solution on a gogle discussion site, and it works.
    "In iTunes, right click the playlist on your iPhone then select "export" to export the playlist as a .txt file (I have 3GS with iOS5). 
    Then still in iTunes, select "File, Library, Import Playlist", navigate to and open the .txt file, and it will appear in the iTunes sidebar.
    I've tried to do this numerous times before.  Sorry if this is old news but I was so pleased I wanted to share it."
    After creating the playlists in your itunes library, sync your phone with the settings to manually manage your music (which will delete all the music from your phone), then drag the playlists back to your iphone.  You can then start manually managing music on your phone.

  • I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?

    I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?

    Also, if you can't get them to work, what is the error message you are getting?
    Baron Samedi

  • Cannot Add a new Accounting Entries - SDK

    Dear Sir,
    I need to add an accounting entry into SAP BO via SDK.
    I am using the following code:
    For iColCount = 1 To lFactorColl.Count
                        '//Search  Accounting information
                        oTable = oDataSet.Tables("DocList")
                        Dim oSRows() As DataRow = oTable.Select("FactorCode = '" & lFactorColl.Item(iColCount).ToString & "'")
                        oJE = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oJournalEntries)
                        Try
                            iIndex = 0
                            oJE.TaxDate = CDate(Right(oDate, 2) & "/" & Mid(oDate, 5, 2) & "/" & Left(oDate, 4))
                            oJE.DueDate = CDate(Right(oDate, 2) & "/" & Mid(oDate, 5, 2) & "/" & Left(oDate, 4))
                            oJE.ReferenceDate = CDate(Right(oDate, 2) & "/" & Mid(oDate, 5, 2) & "/" & Left(oDate, 4))
                            oJE.Memo = "test"
                            '// Set the first lines for the clients invoices - credit side
                            For iRowCount = 0 To oSRows.GetUpperBound(0)
                                iIndex = iRowCount
                                oJE.Lines.SetCurrentLine(iIndex)
                                'sAccountKey = GetAccountKey(oSRows(iRowCount)("CardCode"))
                                oJE.Lines.ShortName = oSRows(iRowCount)("CardCode")
                                'oJE.Lines.AccountCode = oSRows(iRowCount)("CardCode")
                                'sAccountKey = GetAccountKey(oSRows(iRowCount)("FactorCode"))
                                'oJE.Lines.ContraAccount = sAccountKey
                                sFactor = lFactorColl.Item(iColCount + 1).ToString
                                oJE.Lines.Credit = CDbl(Replace(oSRows(iRowCount)("Amount"), ".", ","))
                                sTotalAmt = sTotalAmt + CDbl(Replace(oSRows(iRowCount)("Amount"), ".", ","))
                                oJE.Lines.Add()
                            Next iRowCount
                            'Set the factor line - debit side
                            iIndex = iIndex + 1
                            oJE.Lines.SetCurrentLine(iIndex)
                            'sAccountKey = GetAccountKey(sFactor)
                            'oJE.Lines.AccountCode = sFactor
                            oJE.Lines.ShortName = "02"
                            oJE.Lines.Debit = sTotalAmt
                            oJE.Lines.Add()
                            If oJE.Add = 0 Then
                                Dim num As Integer
                                oCompany.GetLastError(num, sStr2)
                                SBO_Application.MessageBox(sStr2)
                            Else
                                SBO_Application.MessageBox("Import was successful!")
                                oJE.SaveXML("c:\JournalEntries" + Str(oJE.Number) + ".xml")
                            End If
                        Catch exception1 As Exception
                        End Try
                    Next
    this code does not generate any error but no accouting entry are entered although if i try to enter it manually, it is saved in the database.
    please advise what it is wrong in my code making it not working properly.
    PS: both credit and Debit side in my entry is using the BP code and not G/L account.
    Best Regards

    There are a couple of things that I noticed, if I'm reading your code right.  First, it appears you are
    issuing the oJE.Lines.Add()  command at the end of your loop (which would be in preparation for filling that line with data after reading the next row back at the top of the loop).  If that's the case then when you fill your last good line item with data, you're going to add a blank line into the object, and I think that would fail.
    Also, it appears that when you try to add the Journal entry with the code I've copied below,
    you are only checking for error messages when the Add succeeds:
    If oJE.Add = 0 Then
    Dim num As Integer
    oCompany.GetLastError(num, sStr2)
    SBO_Application.MessageBox(sStr2)
    Else
    SBO_Application.MessageBox("Import was successful!")
    oJE.SaveXML("c:\JournalEntries" + Str(oJE.Number) + ".xml")
    End If
    I think that the first line of code, above, should be if oJE.Add <> 0 then....
    Are you getting your message that says "Import was successful!")?

  • Cannot add a new email account, and hence icloud account. When i go into Settings - Mail, accounts, calendars,  the option to add a new account cannot be clicked (ghosted). I also have iCloud Settings ghosted (unclickable). Cannot change in itunes also.

    Cannot add a new email account, and hence i have no way of creating an iCloud account (very frustrating). I had the same problem with iOS 4.3 but i had no email account to create as i set both up when i bought the iPhone 4. After adding a company email and a gmail account (both wok perfectly) i noticed that the option to create more email accounts had been ghosted (unclickable). This didn't worry me at the time. However, iCloud needs me to create one in here so i can access the cloud which i desperately want the ability to do. When i go into Settings -> Mail, accounts, calendars,  the option to add a new account cannot be clicked (ghosted). I also have iCloud in the iPhone Settings ghosted (unclickable). I have same problem in itunes on Mac OSX. Surely restoring isn't the solution as i restored my iphone when changing from iOS 4.3 -> 5. Please help?

    Go to
    Settings,
    General,
    Restrictions, type in your Restriction Password,
    Accounts, tick Allow Changes.
    Press the back key a few times till you're back in Settings, you should see iCloud is now highlight able, now go to Mail Contacts and Calenders and add your email account as per norm.
    Hope this helps.

  • I cannot open a new tab with ctrl + T, or by double clicking or by right clicking

    I cannot open a new tab with ctrl + T, or by double clicking or by right clicking, i was using 3.6.18 before when i started facing this problem, than i uninstalled the firefox and reinstalled Firefox - 3.0.6, still the issue has not been resolved, i need help asap as cannot work without new tabs.

    This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
    Your system details show that toolbar in the user agent as AskTbAPLV5/3.12.2.16749
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • New entry Blog page help

    I use the "travel" blog template ( because i like the page arrangement), have changed the background & browser background to my own image and color, but cannot for the life of me figure out how to make it my template for future entries. I'm so tired of having to start from scratch with "the world of Kevin" style for each new entry. Any help is greatly appreciated.
    Kat

    Try asking this question in the iWeb forum:
    http://discussions.apple.com/category.jspa?categoryID=188

  • How can I add a new entry for determining a requirement type

    Dear Friends,
    How can I add a new entry for determining a requirement type
    via Item Category + MRP type,  I see no new entries selection.
    This is in  Avb Check & TOR-> TOR-> Determination of req type using transaction.
    Please help.
    Regards
    Ravi.

    Availability Check and Transfer of Requirements > Transfer of Requirements > Define Requirements Types ?
    Just one node above?
    Never mind, you need to add entry on item category:S

  • HT2513 I cannot add a new account to my iCal. All the support documents make it sound so easy but it's not working and I am so frustrated.

    I cannot add a new account to my iCal. Why is this so difficult? I am not stupid. I've tried everything. Any help would be appreciated!
    I try to add a new account and it doesn't work no matter what I try. Thanks.

    Is it your own domain?
    Have you tried setting up as Exchange?

  • I cannot add a new pop email account in my "iphone 6"

    I cannot add a new pop email account in my iphone, when i confirmed "saving account" it is automatically being closed and kick-out me from?
    It is iPhone 6 and the system is iOS 8.1
    I am going to select "Others" and then my user name, password and "next".
    Then IMAP and POP settings screen is coming. I am going to select "POP" with my incoming and outgoing server details.
    And finally I am going to proceed with "save".... So... pupff........ it is going, closing, kicking me out. Maybe 20-25 times since yesterday I try it but no win.
    What should I do for these my friends. This is my business email... It was working before in iPhone 5s and afte iPhone 6 I make reset for 5s.
    I try later on for 5s again. It make me the same thing also. They are not allowing me to add a new pop email address.

    Is it your own domain?
    Have you tried setting up as Exchange?

  • "Mission Control" does not show space row and I cannot add a new space (27 inch screen)

    Firstly, "Mission Control" does not show upper row with spaces. I have configured Dashboard as space, but it is not showed either.
    Second, I cannot add a new space because the upper right corner wont show an empty space.
    In system I have configured (Mission Control) the upper right corner as "mission control".
    I do run a 27-inch screen

    I'm having the exact same problem. I have a Macbook Pro that I connect to a 27inch iMac through the mini display port. Whenever I attempt to launch Mission control to move a program to a different space, the "Spaces" dont appear at the top of the screen. Is anyone have an answer for this?
    Also, does anyone know of a 3rd party program to bring "Spaces" back? That was my #1 favorite thing of Snow Leopard, and I need to get that functionality back.
    Thanks

  • Cannot add a new reminider.  I am using and Iphone5, version 6.0.2.  When I press the reminder app on the phone there is no  "+" sign to input a reminder.  When I use Siri it says "sorry I wasnt able to create reminder".

    Cannot add a new reminider.  I am using and Iphone5, version 6.0.2.  When I press the reminder app on the phone there is no  "+" sign to input a reminder.  When I use Siri it says "sorry I wasnt able to create reminder".

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Add a new directory with hyphen (-) in the domain name

    Dear All,
    I'm trying to add a new directory with hyphen (-) in the domain name (default domain *.onmicrosoft.com). As a result I keep getting a validation error: "The domain is not unique". I've tried several
    combinations with really awkward words and a hyphen. Such domain names must be unique. I think that the error message is misleading.
    Is it a well known behavior? Is it possible to use a hyphen in the domain name?
    Thank you for your help,
    Artem

    Dear Arvind,
    Thank you for your effort and time in validating the described behavior.
    According to the
    Regexp for subdomain question on SO, 'Each subdomain part may contain hyphens (dashes), but may not begin or end with a hyphen'. That been said, the validation error, on your screenshot is appropriate. On the other hand, the validation error
    with a hyphen (dash) in the middle is misleading.
    It's not a big deal, since people most likely use a custom DNS name anyway.
    Kind regards,
    Artem

Maybe you are looking for