Canon Scan to Folder (Server 2008 R2) suddenly doesnt work

Canon Scan to Folder (Server 2008 R2) suddenly doesnt work
We have a few Canon Multi Functionals who have been able to Scan to Folder to our Server 2008 R2 File Server.
Since last Windows Updates(13 sep 2012) it doesnt work anymore...
Nothing has changed to the folders or shares. Shares are like:
\\fs01\scans\IT
Shared folder is \\fs01\scans
Share permissions are Full for Everyone
On the folder IT, only the IT department and the Canon Scan user have full conrol...
When I turn off the Windows Firewall on the FS01, it works.
Then i get a SMB = OK on the Multi Functional.
When I turn on the WIndows Firewall, i get a SMB = NG on the multifuntional
I checked the rules, and everthing concerning File and Printer Sharing is allowed...
Can anyone please think what to do?
Because really don't want to go on with the Windows Firewall Disabled.
The Endpoint Protection 2010 Anti Virus is installed on the FS01, but since disabling the Windows Firewall works, i don't think the Anti Virus has anything to do with it.
Update: I just tried it to two other Servers 2008 R2 (with also the Windows Firewall on) and it works! So there is something wrong with that one Server... But as far as I can see, the firewall has all File and Printer Sharing things open...
And when i log on with the Canon Scan user on a PC i can browse to them locations just fine. I also reset the firewall setting to default and reopened the printers and sharing settings

The canon surelly do a check on another port that is not allowed in your firewall.
Run a wireshark on that server. Filter ip.src == ip of a canon.
Check on what port the canon talk to your server and open it.
Last option, does your printer are in another vlan/lan ? Maybe a firewall rule that does not see the printer in your local lan. Thus the rule might block it now.
MCP | MCTS 70-236: Exchange Server 2007, Configuring
Want to follow me ? | Blog:
http://www.jabea.net | http://blogs.technet.com/b/wikininjas/

Similar Messages

MacBook 2008 wifi suddenly stopped working and says no wifi hardware. Took it to an apple shop, they said it could be the airport card but wouldn't do anymore then that. Any help on how to fix this? How do I know if it is the airport card or not?

MacBook 2008 wifi suddenly stopped working and says no wifi hardware. Took it to an apple shop, they said it could be the airport card but wouldn't do anymore then that.
Any help on how to fix this? How do I know if it is the airport card or not?
is there anything else I can try first?
thanks

If the technician at the shop is competent, he has given you a diagnosis that should have identified the problem. You could run the Apple Hardware Test to verify the findings:
https://support.apple.com/en-us/HT201257
Note the Apple Hardware Test is not definitive.
Go to the iFixit.com and Powerbookmedic.com web sites. They have parts and installation instructions. To install an Airport card is fairly easy.
Ciao.

The multipoint-server shell has suddenly stopped working

please help!
hi every time i open the server i am greeted by this message:
the multipoint-server shell has suddenly stopped working.
the details are as follows:
Problem Event Name     :              APPCRASH
                Application Name            :
SRCShell.exe
                Application Version         :               6.1.1600.5
                Application Timestamp :               4eb465b8
                Fault Module Name        :               Station.dll
                Fault Module Version    :               6.1.1600.5
                Fault Module Time Stamp:           4eb465b5
                Exception Code :               c0000005
                Exception Offset              :
0000000000053994
                OS Version                          :
6.1.7601.2.1.0.16.56
                Locale ID
:               13321
                Additional Information 1:             f4fb
                Additional Information 2:             f4fbb3bbd4a03087da47c581553379
                Additional Information 3:             Se3f
                Additional Information 4:
Se3fd17c819664388032530a0fae66b
what should I do? please help!!

Hi,
Please write your notebook product number (p/n), which system are you using and country of purchase.
Resource:
How to Locate the Notebook product number (p/n)
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

The keyboard and trackpad to my 2008 MacBook suddenly stopped working, what's wrong with it/ what should I do to fix it?

The keyboard and trackpad to my 2008 MacBook suddenly stopped working. I've restarted the computer several times and no help. I had some keyboard maintenance done a few months ago at a repair shop so I don't know if that has anything to do with it. What should I do?

First thing I would try would be to remove the battery from your MacBook, connect the computer to it's power adapter and start up, then see if the keyboard and trackpad work normally. Some older batteries have been known to expand and interfere with keyboard and trackpad. If this works, replace the battery.
Best of luck.

Colour Laserjet CM 1312nfi mfp not scanning on windows server 2008 r2

I am running windows server 2008 r2. I have a Colour Laserjet CM 1312nfi mfp. Server does not pick up scanner. Is their software or utility to solve te problem. No software on Hp website.

Hi,
Hope the below document will help you.
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDispl...
Regards
Suganya

Windows Server 2008 xml sync not working

Windows Server 2008 message - xml sync has stopped working. this is preventing me from having my documents automatically upload to a client website for their viewing. these file are uploaded with FTP automatically when
printed form the computer. I will also get an error that SBS Console has stopped working and restart. The console will then work after clicking restart. These are probably related issues. Appreciate any step by step instructions to
get the XML Sync issue resolved so hopefully documents will upload again.

Hi,
à
Windows Server 2008 message - xml sync has stopped working.
Would you please let me know more details of this issue? Please let me know the complete error message or provide
a screenshot of it. (please hide or remove all private and protected information.) Did you remember which specifc operation had been done before this issue occurred? For examples, install updates or install third-party applications?
à
I will also get an error that SBS Console has stopped working and restart.
For the SBS console issue, please follow the path:
C:\Program Files\Windows Small Business Server\Logs and check Console log file if find more relevant clues.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Scan from Envy Printer to MacBook suddenly stopped working

I recently installed an HP Envy 100 printer, scanner copier. For the first week everything worked perfectly. I could print and scan wirelessly using my MacBook, iPhone, iPad or the Envy's controls themselves. Recently when I touched the "scan" icon on the Envy I was taken to the "Choose Scan Destination" as normal, then when I selected "Computer" I received this message:
"You can start a scan from your computer OR scan to your computer from the printer.
Make sure the HP printer software is installed.
Window's Only - Network Connection
In the HP printer software, enable the "Activate Scan to Computer" function.
For Mac and USB connections, the "Activate Scan to Compuer" function is automatically enabled.
Then the option to click "ok' which only returns me to the previous screen.
I used to see instead (when it was working properly) the two computers on my network and I would simply select the correct one and and the scan would wireless appear in my documents folder.
I called HP, we did all their trouble shooting and they said they could no longer help me. The suspected the problem was with my wireless network and suggest I contact apple. They also said the Envy uses Port 427 to scan wirelessly and that I should tell that to someone at apple when I am trouble shooting my airport extreme and network.
Anyone encounter the same problem and know how to fix it?

I suspect this has more to do with the fact that HP &/or Apple haven't gotten their act together to ensure that OS X Lion worked with the printer? I too bought an Envy 100 a few days ago for my daughter to take to university with her. On unboxing it at home to check it worked, we found initial set-up pretty straight forward..... but the only way we can get it to print is by having her 2010 MacBook Pro connected (NOT wireless). My 2011 MacBook Air won't connect to the printer at all, and neither will our iMac...although the latter did "briefly" show the Envy 100 as an available printer before asking for a software update which wouldn't download.
I can only assume that we are expected to sit and wait until HP &/or Apple deign to pull their fingers out; in the meantime there is ZERO information readily available from either company as to what it going on, despite the fact Apple are happy to push HP printers in-store and on-line.
I'm severely tempted just to re-box the printer and find one that, you know "just works "

Windows Backup for Windows Server 2008 R2 Standerd not working 2155348041

Hi
When I am running backups via the Backup server feature I keep getting the following error in the event log:
The backup operation that started at '‎2014‎-‎05‎-‎27T04:59:16.185618200Z' has failed with following error code '2155348041' (None of the source volumes were backed up.). Please review the event details for a solution, and then rerun the backup operation
once the issue is resolved.
The backup report gives me the following error:
the request could not be performed because of an i/o
I have tried using another Harddrive and have installed the Hotfix from windows but still get this error.
I also tried Re Installing the Backup feature this also did not work.
Regards
Roan_B

Hi,
Please run the command below to get the drive's sector size to check if the sector size is 512B. Windows Server Backup only support sector size of 512B.
wmic partition get BlockSize, StartingOffset, Name, Index
Backup fails with Error Code 2155348041
http://social.technet.microsoft.com/Forums/en-US/fa704bd6-b76a-42b4-b8cb-0a93ceb6ce43/backup-fails-with-error-code-2155348041
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Xscreensaver-command -lock suddenly doesnt work

the above gives this message
xscreensaver-command: no screensaver is running on display :0.0
it was ok yesterday ..
this didnt work:
$ xhost +localhost
$ xscreensaver-command -exit

Doesn't seem like the deamon is running no...
Put "xscreensaver -no-splash &" in ~/.xinitrc (before you start the wm) or in some other file that your wm uses for autostarting of apps.

Fax and Scan on Server 2008 Terminal Server

Summary: Fax and Scan does not appear in the start menu on a terminal server with desktop experience installed. Any ideas why?
I am running Windows Server 2008 Enterprise as terminal server for about a dozen users. I would like to enable them to use the fax server capability of our Windows SBS 2003 server. From what I can tell, they can access the fax server using the Fax and Scan software on server 2008. All of the documentation I've read says that when I enable the "Windows Desktop Experience" feature on Server 2008, the Fax and Scan software should appear in the Start Menu. It's not there. I have un-installed and re-installed Desktop Experience, but still no Fax and Scan. From what I can see in the documentation, I don't need to install the fax server role to get the software, just the desktop experience feature.
Is is possible that fax and scan and/or other features of desktop experience are disabled when terminal services are enabled? Is there something else I'm missing?
Thanks,
Lee

Hi,
According to your description, I suspect that you may misunderstand “Desktop Experience” and “Windows Fax and Scan”.
Based on my research, if you want to use Fax and Scan services on Windows Server 2008, you should install the Fax Server role from Server Manager first.(For instructions, see Install the Fax Server Role. http://technet.microsoft.com/en-us/library/cc771198.aspx)
After you installing the Fax Server Role, the Windows Fax and Scan item will appear in the Start Menu(Start\All Programs\Windows Fax and Scan).
The Desktop Experience includes most of applications and features that are provided in the Windows Vista. Users who are using computers running Windows Vista Business, Windows Vista Enterprise, Windows Vista Ultimate, and Windows Server 2008 can send a fax using the Windows Fax and Scan feature—either using a fax device attached locally or a fax server. To access this feature on Windows Server 2008, you must install Desktop Experience, which is available from Server Manager.
You may refer to the following the steps to install Desktop Experience:
1. Open Server Manager: click Start, point to Administrative Tools, and click Server Manager.
2. In the Features Summary section, click Add features.
3. Select the Desktop Experience check box, and then click Next. and then click Install
Hope this is helpful.
Nick Gu - MSFT

Support for JDeveloper 10.1.3 on Windows Server 2008 64 bit OS

Hello,
We are using JDeveloper 10.1.3.3.0 (patch # 9879989) for R12.
Would like to know support for Jdeveloper on windows server 2008 - 64 bit.
Thanks,
Swati.

Hi Swati,
Currently I am using Jdeveloper Patch#9172975 for R12.1.2 on windows server 2008 X64 and it works fine.
As Jdeveloper Patch#9172975 is lower version then Jdeveloper Patch#9879989, Patch#9879989 should work on Windows Server 2008 64bit.
Still I am not confirm about Jdeveloper Patch#9879989 on Windows Server 2008 64bit.
Thanks,
Laukik

Can I install 11.5.9 on windows server 2008???

Please let me know whether 11.5.9 is compatible with newly released Windows Server 2008. That is can I install or clone 11.5.9 on windows server 2008. Will it work fine? Is it supported by Oracle?
Thanks & Regards,
Abdul Jabbar

Hi,
Thanks for the reply. Now we have decided to migrate our existing 11.5.9 application from single-node to 2 Node(multi-node). Could you please let me know what services should reside on each node (Recommended by Oracle).
And please let me know the steps I should follow to achieve the task as well.
Thank & Regards,
Abdullah

Management Pack for Windows Server 2008 Enterprise SP1

Hello,
I tried to manage the performance of a Windows Server 2008 Enterprise SP1 (6.0.6001) but SCOM 2007 R2 just check the availability with a ping status.
I have installed the normal management packs:
On the same SCOM, I have servers with Windows Server 2008 R2 and they work perfect.
What can I do?

Hi Journey Tinoco,
Performance can be monitored by using the active alerts TAB where a alert / alerts will be triggered based on the default management pack which you have installed / imported or if you have created a custom monitor based on your preference on what performance
counter you want to monitor on windows server 2008 servers VIA SCOM.
Or you can pull server performance report specific for Windows server 2008 from the reporting TAB as per the below screen shot for details.
The one which you are opened is the health explorer view which is not showing much details.
Go to reporting TAB ===> Select Windows server 2008 operating system monitoring and then What ever appropriate report you need to pull based on your requirement. For example i have pulled a report below for "Operating system performance.
Over here Click object and select the computer name and the icon should be a Windows serve / Computer as per the icon in my screen shot below. Select the time and date from and to the report you want and dont touch the add object option. Once done click
the Run button on the left to you will get the report as below.
Please note: If the below report is what you are looking for is not available in your SCOM's reporting TAB. Then you have not installed the reporting Management pack for Windows server 2008 monitoring. Download
it from the below link.
http://www.microsoft.com/en-in/download/details.aspx?id=9296
Hope this helps you.
Gautam.75801

Crystal Reports XI R2 and Window Server 2008 Hyper-V environment

Hello,
Is there any known issue that Crystal Reports XI R2 running on Window Server 2008 Hyper-V enviroment?
I tested on Development Server which is Window Server 2008 and it is working fine but when tested with another servers which are in Hyper-V enviroment and ASP.NET program keep crushing.
I got the below error on my event log:
Faulting application w3wp.exe, version 7.0.6002.18005, time stamp 0x49e023cf, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x03976ce8, process id 0x%9, application start time 0x%10.
Thanks,
Yin

Hi Yin,
Hyper-V I assume is the Hyper threading Intel and others enabled correct? Should not make a difference other than performance. You are still using 1 CPU so the cycles are being split between multiple programs. Not really an advantage.
Try using ProcessMonitor and search on access denied to see what is having the problem.
Other issue is CR XI R2 is not supported on windows 2008, or at least you should be running Service Pack 6 to at least get Windows 7 and Vista support, which is about the same as Windows 2008.
Go to our download page and install SP 4 full build and then SP 6. ( assuming you don't have any SP's installed ) or look in the download area and download all of the patches from SP 4 as well as the distribution files for how ever you are deploying your application.
Thank you
Don

Problem with Windows Vista Server 2008 - Font characters replaced with square blocks on login screen

Hi! Last week, I set up a server for a client (Windows Vista Server 2008). Everything was working fine until this week when I did a remote login, and the server's screen shows all blocks instead of character (ie. "Administrator" shows up as Rectangular blocks) - and when I type in the password box, my characters come out the same blocks. The computer lets me login like this but then when the desktop displays, all texts is Blocks - like the windows default font is missing.
Anybody else run into this mystery and is there a fix?
Thanks.

Hello,
Based on my experience, this issue might be caused by compatibility issues of video card driver and language options settings.
I’d like to suggest you try the following steps to fix the issue.
1.    Please check whether you have installed correct video card drivers on both client and server machines. You’d better download the latest drivers from Video card manufacture and reinstall the drivers on both of the machines.
2.    Please confirm whether the regional and language options settings on client and server machines are the same. If not, please temporarily change the settings on two machines to be the same and have another test.
3.    If you use some third-party remote desktop connection tools to connect to the server, please have another try with Windows build-in remote desktop connection.
I hope this helps, thanks.
Regards,
Neo Zhu

Canon Scan to Folder (Server 2008 R2) suddenly doesnt work

Similar Messages

Maybe you are looking for