Cannot add https 443 access ...

Hi,
I would like to configure the reporting web to use https: via 443 port but it just cannot bind and not success...
Where I can check the error or please further advice ...
Thanks

Hi kkcci88888,
Based on my understanding, you want to configure an report server URL as https:// with 443 port. After you move certificates to the trusted certificates, then you get a WinProviderException now.
In Reporting Services, when configuring a report server URL, we should issue a certificate and enroll it on report server. In your scenario, I would like to know have you created a self-signed certificate in IIS manager. If that is a case, based on my test,
the certificate will display on the Trusted Root Certification Authorities tab when opening certmgr.msc. In your scenario, you should change the report server URL back to the original one in RSCM, then configure the SSL identities for report server again.
About creating a report server URL as https://, please refer to this article:
A step-by-step example of configuring a reporting services point for HTTPS in System Center 2012 Configuration Manager.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Similar Messages

HT1452 I have a Toshiba Canvio 1TB external hard drive on my Mac. I've used it for 4-5 months with no problems, but now cannot add to it (I use it mostly for photo storage) to it. I can still access information previously added. Ideas?

I have a Toshiba Canvio 1TB external hard drive on my Mac. I've used it for 4-5 months with no problems, but now cannot add to it (I use it mostly for photo storage) to it. I can still access information previously added. Ideas?

I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

Cannot add user to group eventhough i have full access

i cannot add users to groups in subsite even i am in the owners group of the subsite

Check the settings of the group itself. By default the only person who can add users to a group is the person who created the group. I normally change the group settings so the group is owned by the Site collection root site owners group. That
way any of those users can modify the membership of the group.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

I have no more calendar synchronization with iCloud. when accessing to icloud account I cannot add an event on icloud calendar the message is :"server error"; any help?

I have no more calendar synchronization with iCloud. when accessing to icloud account I cannot add an event on icloud calendar the message is :"server error"; any help?

Tap the little claendar icon at the top left (next to the search icon) and see what calendars are set up in WeekCal. If none are enabled, then enable the one(s) you want to use.

E52 - after update cannot add access points

Can anyone help plz? I updated firmware to 054.003 but now I cannot add access points for wap/mms/internet! The setup wizard only gives me the option to add an email address only...before update I could get operator settings which is not the case now. Can anyone help? My cell phone carrier is ORANGE IL.
Thanks in advance.
mike

I upgraded an unbranded E52 last night to 054.003 and didn't have any problem adding new access points that the operator (in this case vodafone UK) pushed out. Suggest maybe a hard reset on the phone?

Cannot add Buddies to AIM account

I have read the thread at http://discussions.apple.com/thread.jspa?threadID=1462798. I have symptoms 1-3 and do not have symptom 4:
1. Cannot see Buddies On-line they know are.
2. Cannot add new Buddies.
3. Cannot see the Buddy List with any Buddies in it.
4. Cannot get the Buddy list to appear and have no access to Preferences.
When I delete the recommended files:
There are different levels of "cure" that work for different people depending upon which symptom they have. Symptoms 1 through 3 may be fixed by deleting /Users/username/Library/Preferences/com.apple.ichat.AIM.plist
Sometimes for Symptom 3 /Users/username/Library/Preferences/com.apple.iChatAgent.plist should also be deleted. iChat needs restarting after each deletion.
I have to setup iChat again. Then I can add new Buddies. However when I close iChat and re-open it, the problem has returned.
Do you have any suggestions.
(I am using the latest updates of all software.)
Thanks
Harvey

as only the customer service can access your account information and check it's status, you may need to contact them again for clarifications regarding such restrictions;
How to Contact Skype Customer Service
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

Cannot add WLC 5508 to Prime Infrastructure 2.1

Regards,
I've been migrating / implementing a WCS to PI 2.1. I had several problems at first to add the 11 WLC we have to PI which I could be solving by trying and testing as I have not found many references by Cisco when it comes to troubleshooting when deploying PI.
I have several queries:
1. The WCS was added 11 WLC using different SNMP communities are configured on each of them. At first when trying to add the WLC had PI SNMP communication problems. I performed the test to eliminate any of the WLC added to WCS and add it again with some communities already existing R / W without any problem. At the end, I could not add the WLC so I had to create an SNMP community with the IP of Prime in the WLC so that they can be added. Does anyone know what is the cause of this?
2. I could not add a WLC 5508 IOS 7.3 using this method, even creating an SNMP community and IP mask 0.0.0.0 / 0. No access list or FW in between the WLC These WLC are spread over several countries but i was able to add the other WLC adding a community in each WLC pointing to the IP of Prime. It is similar to this case:
https://supportforums.cisco.com/discussion/12232506/cannot-add-wlc-5508-v761200-prime-infrastructure-21
Thanks for the help.

It turns out that this situation was caused by a bug in 7.6.120.0 (CSCuo73572).
TAC handed me an escalation image (7.6.120.16) that fixed this.
Added the controllers sucessfully on the first try.
Phill

I cannot add an exchange email onto my iPhone 4!

I cannot add an exchange email onto my iPhone 4, it can be added onto a Blackberry with the same information. I have tried using the IP address instead of the server name but it still telling me that its unable to verify the account information. Please does anyone have any ideas on how to work around this?

There are several things to check with Exchange on your iPhone, and some depend on your exchange server details. It would be difficult for anyone to help you without any such specific information (i.e. an idea of the details you entered into your blackberry - though no need to give us exact details of your account).
Details should be the same as you use for Outlook Web Access for example.
In my case for example I don't need the exchange. /exchange or /webmail added to it, so just the address / IP address of the server works OK.
Have you checked the Domain is correct?
And SSL switched on or off make a difference?
Here's Apple's basic instructions: http://support.apple.com/kb/ht2480 with more detail here: http://help.apple.com/iosdeployment-exchange/?lang=en

Since adding a gmail account, I am stuck with it. I cannot delete it. I cannot add a second one. Worst of all I cannot restart the computer as it tells me that Mail will not let me restart!

Since adding a gmail account, I am stuck with it. I cannot delete it. I cannot add a second mail account. Worst of all, Mail will not allow me to restart the computer!

Hi!
I understand that Computer 1 is synced and you see something like this when you access the Sync Tab under Preferences: https://support.mozilla.com/media/uploads/gallery/images/2011-01-27-15-46-25-9c0352.png
And in Computer 2 you get a window similar to this: https://support.mozilla.com/media/uploads/gallery/images/compcode.jpg
But when you click on Add Device the following window doesn't appear: https://support.mozilla.com/media/uploads/gallery/images/2011-01-27-15-46-48-5f59d1.png
Is this correct? If so, please let me know what you see (a screenshot will be handy).
You can also set up the second computer following this instructions: https://support.mozilla.com/en-US/kb/How%20to%20sync%20Firefox%20settings%20between%20computers#w_what-if-im-not-near-my-first-computer

Cannot add shared Contacts in Open Directory from a client

Hello all
I need to transfer vCards from a local Address book to the Server and I need them to be shown in each client's Address book.
*Problem 1:* I cannot add or edit shared contact using the Directory app. from a client to a 10.5.3 Server. Only the Directory Admin credentials are valid. The client 10.5.5 is bound OK. The app is configured to use password, not Kerberos, and the Server is "responding normally" in the Directory Utility application.
I can even login as a mobile user with Network Home. Same there.
*Problem 2:* Ive put in Address Book the correct LDAP settings, but I cannot see a catalog of vCards. If I search using the search field, I get results, but I need them to be shown all as catalog.
Thanks in advance
Kostas

This turned out to be a reverse DNS configuration problem. Apple support suggested using a local ip address instead of my public host name. That worked so I looked into the reverse dns configuration. I fooled myself by thinking that if I could reach my host with my.host.com with other services like http, that my DNS was set up correctly. My reverse DNS originally resolved to my.host.com when it should have been something more like 123-456-789-103.cos.pcisys.net. Now I can reach my host from anywhere with the Directory application.

Updated itunes to 10.4.1.10 on Windows XP. Now cannot add files or album covers. please help

Installed latest version of itunes when prompted yesterday. Using hp compaq laptop running Windows XP. Now cannot add files to library or add albulm covers. Tried to play new mp3s from external drive, that I was trying to add. got message saying "Itunes was not installed correctly. Please reinstall iTunes. Error7 (windows error 1455)"
Have also had a couple of "iTunes has encountered a problem and needs to close" forced shutdowns. Cannot find files to reinstall and itunes is telling me I am using the current version.
Infuriating!!! Can you help me please?

Asking me what I think is not what really matters here. What do you think? Do you want to wait for another update to iTunes in order to sync or backup your iPad again? That could be weeks down the road - no telling when it may be updated.
Why dont you go through this support article and see if any of this stuff helps you? The article is for Windows users.
http://support.apple.com/kb/TS1538
Here is something very simple to try. Quit iTunes and restart your computer. Then restart your iPad and try to sync/connect again.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Cannot add networked Brother MFC-7820N after upgrading to Leopard

Hi,
I did a clean install of Leopard on a new drive I installed on my Macbook. Then I migrated my account from an old drive which was running the latest version of Tiger.
Leopard is running fine, except that I cannot add my networked printer (Brother MFC-7820N). According to Brother, the printer drivers come with the Leopard CD. In the /Library/Printers/Brother directory there sub-directories for Brother LUT, Filter, Icons, Profiles, Utilities. So I think the drivers are present.
In the Print & Fax system preference, I click to add a printer and nothing shows up under "Default". According to Brother's instructions, the printer should show up. Is the MFC-7820N Bonjour capable?
Is there something else I need to do? I am not running control center like I did under Tiger.
Any help would be appreciated.
Network is a wireless network with the printer attached to a netgear wireless router.

Okay, I found the answer to the problem. It is a Brother configuration, not a Leopard one. Needed to setup Bonjour on the printer by configuring the mDNS properly.
From a browser, go to your printer using the ip address. Click on Network configuration link. Default user/password is: admin/access. Find the "mDNS" link, click on it. Then configure with a name such as BrotherMFC and select enable. Once this is setup, then clicking on "+" in the print and fax system preference works.

Solution Import Failure Message: Cannot add a Root Component 'GUID' of type 29 because it is not in the target system

Hi all,
Please refer to the error:
Root Components import: FAILURE
[2015-04-10 17:04:48.126] Process: w3wp |Organization:0937f109-45df-e411-80cf-0050560100db |Thread: 43 |Category: Exception |User: ac011cf7-ad36-405b-91cf-2155ca15efb1 |Level: Error |ReqId: d3924c06-ad4b-4d5e-a204-70f8170016e1 | CrmException..ctor
ilOffset = 0x30
at CrmException..ctor(String formattedErrorMessage, Int32 errorCode, Object[] arguments) ilOffset = 0x30
at ImportRootComponentsHandler.GetSolutionRootsCollection(Boolean throwIfMissing, Boolean skipRibbonCustomization) ilOffset = 0x209
at ImportRootComponentsHandler.ImportItem() ilOffset = 0x8
at ImportHandler.Import() ilOffset = 0x43
at RootImportHandler.ImportAndUpdateProgress(ImportHandler ih) ilOffset = 0x7
at RootImportHandler.HandleNonMetadataHandlers(String[] ImportEntities, ImportHandler& ihForCurrentPath) ilOffset = 0x33
at RootImportHandler.RunImport(String[] ImportEntities) ilOffset = 0x1D8
at ImportXml.RunImport(String[] ImportEntities) ilOffset = 0xE
at ImportXml.RunImport() ilOffset = 0x5BF
at ImportXmlService.ImportSolutionSkipCapable(Boolean overwriteUnmanagedCustomizations, Boolean publishWorkflows, Byte[] customizationFile, Guid importJobId, Boolean convertToManaged, Boolean skipProductUpdateDependencies,
ExecutionContext context) ilOffset = 0x46
at RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) ilOffset = 0xFFFFFFFF
at RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments) ilOffset = 0x25
at RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) ilOffset = 0xCF
at LogicalMethodInfo.Invoke(Object target, Object[] values) ilOffset = 0x4F
at InternalOperationPlugin.Execute(IServiceProvider serviceProvider) ilOffset = 0x57
at V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context) ilOffset = 0x200
at VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context) ilOffset = 0x65
at Pipeline.Execute(PipelineExecutionContext context) ilOffset = 0x65
at MessageProcessor.Execute(PipelineExecutionContext context) ilOffset = 0x1C5
at InternalMessageDispatcher.Execute(PipelineExecutionContext context) ilOffset = 0xE4
at ExternalMessageDispatcher.ExecuteInternal(IInProcessOrganizationServiceFactory serviceFactory, IPlatformMessageDispatcherFactory dispatcherFactory, String messageName, String requestName, Int32 primaryObjectTypeCode,
Int32 secondaryObjectTypeCode, ParameterCollection fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId, Guid transactionContextId, Int32 invocationSource, Nullable`1 requestId, Version endpointVersion)
ilOffset = 0x16E
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, UserAuth userAuth, Guid targetUserId,
OrganizationContext context, Boolean returnResponse, Boolean checkAdminMode) ilOffset = 0x1F1
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset
= 0x2D
at OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x26
at InprocessServiceProxy.ExecuteCore(OrganizationRequest request) ilOffset = 0x34
at PlatformCommand.XrmExecuteInternal() ilOffset = 0xF6
at ImportSolutionCommand.Execute() ilOffset = 0x20
at DataSource.ImportSolution(Byte[] customizationFile, Boolean overwriteUnmanagedCustomizations, Boolean publishWorkflows, Guid importJobId, Boolean convertToManaged, Boolean skipProductUpdateDependencies, IOrganizationContext
context) ilOffset = 0x0
at SolutionImportProcessPage.ImportSolution() ilOffset = 0x123
at SolutionImportProcessPage.ProcessRequestData() ilOffset = 0x4A
at SolutionImportProcessPage.ProcessAction(String action) ilOffset = 0x92
at AppUIPage.OnPreRender(EventArgs e) ilOffset = 0xD
at Control.PreRenderRecursiveInternal() ilOffset = 0x54
at Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) ilOffset = 0x6D3
at Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) ilOffset = 0x3C
at Page.ProcessRequest() ilOffset = 0x14
at Page.ProcessRequest(HttpContext context) ilOffset = 0x33
at CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() ilOffset = 0x18D
at HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) ilOffset = 0x15
at ApplicationStepManager.ResumeSteps(Exception error) ilOffset = 0x10A
at HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) ilOffset = 0x5C
at HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) ilOffset = 0x16A
at ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType) ilOffset = 0x4B
>Crm Exception: Message: Cannot add a Root Component 0ffbcde4-61c1-4355-aa89-aa1d7b2b8792 of type 29 because it is not in the target system., ErrorCode: -2147188705
[2015-04-10 17:04:48.126] Process: w3wp |Organization:0937f109-45df-e411-80cf-0050560100db |Thread: 43 |Category: Platform.Sql |User: ac011cf7-ad36-405b-91cf-2155ca15efb1 |Level: Info |ReqId: d3924c06-ad4b-4d5e-a204-70f8170016e1 | BusinessProcessObject.ExecuteNonQuery
ilOffset = 0x28
I am getting this coming up in the error log when I attempt to import an unmanaged solution.
After searching on google Type 29 refers to a workflow.
I go into the source system and query the database by the GUID and discover that it is actually a Business Process Flow called 'Phone to Case Process'.
I do not have this process in my target system as I deleted it.
Looks like this is one of the out of the box ones. I don't think we we have changed this one much.
What does this mean and what should I be looking for??
Anyway how do I remove this offending process from the unmanaged solution xml file and attempt to re-import it?
It doesn't look like I can generate the solution again without the offending workflow/process..

I managed to resolve this issue after looking at this thread:
https://social.microsoft.com/Forums/en-US/fddff17f-1cca-4d33-a666-60c08ad76b0c/crm-2011-import-failure?forum=crmdevelopment
Just modify both solution and customizations xml by searching for the guid and removing the root component

Since updating my iTunes I no longer have any controls. iTune covers the entire desktop and I cannot add from my files. Can anyone please advise me.

Since updating my iTunes I no longer have any controls. iTune covers the entire desktop and I cannot add from my files. Prior to updating I had a perfectly good iTunes which would allow me to stories for including on a iPod.
Can anyone please advise me.

From my post on what seems like the same issue (found here: https://discussions.apple.com/message/21087892#21087892)
Take the following steps:
1) while connected to wifi, toggle off then back on the Show All Music and iTunes Match options shown in my original post. Important: I did this step before, but wasn't connected to wifi, and my music disappeared. Subsequently, I connected to wifi and turned off and then back on those options and everything came back though it was grayed out and my only option was to download music.
2) To get streaming over cellular back, go into Settings>General>Cellular and scroll down to the "Use Cellular Data for:" options and make sure the iTunes option is set to 'On'
The above steps will bring back the streaming capability which seemed to go away when you update to 6.1. It didn't ACTUALLY go away, but something about the update toggled off the iTunes option in step 2 above.
I did a final test by turning off wifi, opening Music app and selecting a song. It played successfully without downloading! Crossing my fingers, but I think I'm good to go!
Hope this helps!

2 problems: 1st unopened messages, 2nd cannot add personal email in setup wizard

Hi guys, I'm having a problem with my device. It seems like I cannot add a personal email adress in my email setup (from the setup wizard) When I enter this setup wizard > email setup the following appears: email setup select an email setup option [ ] I want to use a work email account with a Blackberry Enterprise Server AND THATS THE ONLY OPTION I CAN PICK! (a friend of mine with the same device could add a personal email) from there I can only choose { close } or { next } what is happening, can someone explain what I can do to add my personal adress? ------------------ Another thing I find quite strange is the fact that on my desktop the icon "unopened message count" appears. When I open the BB-menu, there should be a little star in the message-icon right? Well it isn't there! (the litte white-on-red star) So this icon tells me that I have unopened messages, but I can't find them anywhere.. guys please help!!!

Hi and Welcome to the Forums!
Your first problem is carrier related -- you must have the proper data plan from your carrier (at whatever costs they charge) to enable enhanced BB functions like email. A generic data plan is not usually sufficient -- some call the required plan The BlackBerry Data Plan. But call your carrier and ask them what you need from them in order to have access to their BlackBerry Internet Services (which include personal email).
Your second problem I am not understanding. What "BB-menu" are you accessing? Where exactly is the star you are seeing? Where exactly is the star you are expecting to see? More and clearer details, please.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Cannot add https 443 access ...

Similar Messages

Maybe you are looking for