Cannot add print server role

Hi,
I have a server in a Citrix farm where I can't add the print server role. It was no problem on the other servers in the farm.
I get this error: The specified service does not exist as an installed service (0x80070424)
Restarting the server doens't help. Found other with similar problems which referred to this:
http://support.microsoft.com/kb/968002
But Windows Update works fine on the server.
Any ideas?

Hi Kim,
You can either try to repair the OS. Or, please check the below links which may help you in fixing Windows module installer service issue. Once Windows module installer service issue is fixed, please run sfc /scannow in elevated command prompt.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/00580ff7-4412-459b-b176-c8a002ebd740/sfc-problem-windows-resource-protection-could-not-start-the-repair-service?forum=winserversetup
http://support.microsoft.com/kb/959077
Thanks,
Umesh.S.K

Similar Messages

Error: 0x80073701 when trying to add Print Services Role in Windows 2012 Standard

Hello,
I'm getting an error when trying to add Print Services role in Windows 2012 Standard. I'm getting the same error whether I use the GUI or from PowerShell.
This is a new server install.
The PowerShell error follows:
add-windowsfeature : The request to add or remove features on the specified server failed.
Installation of one or more roles, role services, or features failed.
The referenced assembly could not be found. Error: 0x80073701
At line:1 char:1
+ add-windowsfeature print-services
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation: (@{Vhd=; Credent...Name=localhost}:PSObject) [Install-WindowsFeature],
    Exception
    + FullyQualifiedErrorId : DISMAPI_Error__Failed_To_Enable_Updates,Microsoft.Windows.ServerManager.Commands.AddWind
   owsFeatureCommand
Success Restart Needed Exit Code      Feature Result
False   No             Failed         {}
Any help with this issue will be greatly appreciated.

Hi,
I think you should start with chkdsk C: /F and sfc /scannow.
Regards.
Vivian Wang

2008 R2 PDC with DNS, File and Print Server Roles

Hi all,
we have a brand new Canon iRA7260 setup on 2008 R2 print server, which is also our DC, DNS, DHCP and File Server with latest PCL5c drivers downloaded from Canon's website as recommended at that time by the canon technician who assembled the
machine. All our laptops and desktops are running Windows 7 64-bit and after creating a GPO everyone got connected to the printer no problem, the printer has a static IP, same subnet as the print server and PDC, printer's port has been setup to RAW
and to spool documents, driver isolation setup to default.
All users are setup for secure print, so every print job they send to the printer stays on the printer until they walk up to the machine and release it by punching in a department's pin. Everything works great except for every morning a get a few complaints
that the jobs sent to the printer did not appear in the secure print folder. There is no errors of any kind on workstations and all I see in the print job logs on the print server is that document been spooled, printed and deleted. The strange thing is that
the size of the document that disappears is always shown as 0 bytes in size and 1 page long. And the whole process of spooling printing and deleting happens within 1 second according to logs. There is no errors or warnings in the log except for informational
events.
I just discovered that what actually fixes this issue for me is not even restarting the print spooler on the print server, but just login into the print server from my workstation via RDP with admin credentials. Once I login into the server remotely,
every print job sent to the printer afterwards from every workstation in our office appears as usual in users secure print mailboxes. Users don't even have to reboot their work stations, everything just starts working as usual. There is no overnight activities
on that server as all our staff leaves the offices by 8 p.m. the latest and the only thing that is running overnight is the Symantec's Backup Executive backup jobs. Is it possible that a back up job could somehow affect the print server/print driver settings
or put it into a "sleep" mode so it would require a domain admin login to the server to bring it back into operational state?

Hi, the print server had default permissions set after the role was installed. I just added domain users and authenticated users with print and view server rights. I don't think this is a problem though because Samsungs Brothers and Xerox printers
are working. It looks like some process that runs at night on the print server disallows users to print to the Canon printer when they come in in the morning. Login remotely with admin credentials into the 2008 R2 that has print server role installed and this
canon printer deployed via GPO fixes this immediately for all users. After the printer works fine until the last staff leaves the office. However when I come in in the morning everyone reports to me the same problem which again I'm able to fix by login with
my domain admin credentials. Could this be due to some special permissions that canon drivers require to be added that I'm not aware of? Or could this be caused by the overnight Backup Executive 2010 R3 backup job that kicks in at 9 p.m. every night?
Thanks

How to add print server in server manager console

Hello,
I want to know how can I add print server in server manger console (not print management console)? I want to add another print server in server manager. I can add it by print management, but dont know how to add it in server manager. In server manager there
is only local server in Print Services.

Hi Amin2234,
As far as I know you can There are two primary tools that you can use to administer a Windows print server:
•Server Manager
•Print Management
Print Management provides a single interface that administrators can use to efficiently administer multiple printers and print servers and is the primary focus of this document.
Print Management provides a central administration point for sharing printers on a network and managing print server and network printer tasks.
The related KB:
Print Management
http://technet.microsoft.com/en-us/library/cc766474.aspx
Add or Remove Print Servers
http://technet.microsoft.com/en-us/library/cc755141.aspx
Overview of Print Management
http://technet.microsoft.com/en-us/library/cc731857.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Hello,
Thanks for your answer, but I asked how to add print server in "Server Manager" consol, not by print management.
My server manager has currently 1 print server added, while I have 2 print server added in print management. I want to add the second print server in server manager console too.

Cannot add printer to Linux server

I have a printer connected to a Linux box by USB. I can configure and print to it from Windows 8 (using \\IP-address\queue-name). I can't add it as an IP printer in Mavericks. I've tried IPP and LPD. In any case, I get the pop-up
Unable to verify the printer on your network.
Unable to connect to "192.168.0.4" due to an error.
When I proceed to create the printer anyway, printing hangs in the queue.
I've tried to find a solution by searching the Net. The only thing I can think that's different in my situation is that my MacBook is on a different subnet that the Linux box. Of course, I can access the Linux box over my home network using ssh. The network topology is such that my MacBook is on wireless going to a range extender which goes to the wireless router then to an ethernet switch that the Linux box is connected two. The two sides of the wireless router are on different subnets.
What can I check to get this going using the IP type? Or, can I configure it as a Windows printer (the Add printer dialog doesn't find the printer and I can't see how to manually add it using the address and name directly).
Thanks for your help.

What printer model is it? I ask, because often manufacturers provide USB-only drivers for USB-only printers - for Macs, that is. In other words, if you know about CUPS from using Macs and linux, the manufacturers actually provide drivers with the comm protocol built-in, rather than make use of the USB "backend" available from CUPS. These are called "monolithic" drivers - they don't follow the unix/linux/CUPS concept of making use of already-provided modules.

Cannot add printer...Error message Print Spooler not running

just purchased HP with vista. I had a HP Photosmart 6525 that did work at one time and then it stopped. Thinking the printer was the problem, I bought an HP 5660 and i get the same error messages. It did work to begin with but has stopped. I have unplugged and replugged in everything. Tried downloading drivers again and keep getting errors. I get an option to download the drivers from windows update or windows/INF/oem.inf. It does not matter which I choose as I keep getting a message that windows found driver software for your device but encountered an erro while attempting to install it. On of the installers for this device cannot perform the installation at this time. When I go to add on a printer I get the message that Windows can't open Add printer. The local print spooler is not running. Please restart the spooler or restart the machine. I have restarted the machine many times and gone through the help with the spooler and there is nothing there to be spooled. I have downloaded and run the print & scan doctor, but that did not help. thanks for any and all help

The spooler is part of WIndows, if it is stopped (or broken), no printer will work.Try clear and restart the spooler (this page may help: http://hpanswers.blogspot.com/2008/10/how-to-start-stop-and-restart-print.html and if this doesn't solve the problem, you need to reinstall Windows (or run a system recovery to reset Windows).

Cannot add printer connected to airport extreme

when i go to add a printer coonected to airport extreme, i can see the printer as a bonjour printer and begin the process of adding printer...when the printer setup utility goes to add driver, the printer setup utility goes into a loop and has to be forced close...i can connect to the same printer with no problem when it is shared from another mac in the house...any ideas???

having the same type of problem. the HP designjet 110plus that we have connected to an airport express disappeared from my printer list sometime after upgrading to snow leopard. cannot add it manually, error -9672. tried uninstalling the driver, rebooting, and reinstalling the driver. nothing.

Cannot Add Printer Attached to Time Capsule

I upgraded to Lion on my MacBook and have since not been able to print over the network using Time Capsule. I have a Canon MP520 attached to a 500GB dual band time capsule. I have cleared all the printers from system preferences to start fresh. Under Print and Scan in System Preferences, I click the '+' button to add a printer. Like you would expect, the Canon MP520 appears under nearby devices. When I select this option, a pop up explains that software for the printer is available from Apple. Each time I click 'download and install', I get a progress bar that searches for the software and an error that the software is unavailable and to check with the manufacturer. Cool.
I have downloaded and installed several versions of Canon Printer Utility and the firmware. Everything I can find. When I click '+' to add the printer, it does the same thing and I cannot figure out how to add my own firmware. Finally, I try to quickly set it up through Pages. I get to an "add printer" page that has default fax ip and windows options at the top. It displays my printer as a Bounjour device. It gives me the option to select which printer software to use. When I click on "select printer software..." it gives me a pop up window and no software is found.
This is really frustrating and like I said I have had no problems up until now. Any help would be greatly appreciated.

Hello Stuart and welcome to the discussions.
Let's assume that the HP5550 is compatible with Time Capsule (TC). I'm not familiar with that particular model, but bear in mind that TC will not support scanning and other advanced features if you have an all in one type of model.
Work your way through the troubleshooting guide from Apple.
http://support.apple.com/kb/TS1253
Post back on your progress.

Cannot add workset to role

Hello,
I try to create a very simple implementation as described there :
Configuring EP for connecting to SAP R/3
However, when I come to the step 'attach workset to role', I do right click the workset and choose add workset to role but nothing happens and I get a warning in my IE saying 'access refused'.
I guess it is an authorisation issue, but the user I use has been granted all roles available on the portal.
Can somebody help me please?
Thank you.
Julien Boffet

Hi Julien,
You need to give Permissions on the Workset and Roles folders in Content Admin --> Ur respective workset.
Just right click on the Workset and add the respective user name in the list and then give the proper permissions to him, whether he needs full permission or only Read etc.
I have a great PDF for the same, let me know how can i send it to you.
You can refer these SAP NOTES for the same
713210
775117
786523
Reward points if helpful.
Regards,
Shailesh Nagar

Cannot install WINS Server Role on Windows Server 2008 R2 Standard x64

Hi,
We are trying to install WINS Server Feature on a brand new Windows Server 2008 R2 Standard x64 (Virtual Machine). It seems that WINS is getting installed and right at the very end it gives an error 0x80070002.
We have tried rebooting the server multiple times , DNS/DHCP roles have been installed successfully as
well . It is just the WINS server feature that we are unable to install on this server.
Can someone point us to right direction. Are there any pre requisites we need to ensure before installing this feature. Are there any alternate ways to install
the WINS feature .. if yes please let us know.

The error indicates a File was not found:
C:\Users\Mark\Documents\Tools>err 0x80070002
# for hex 0x80070002 / decimal -2147024894
COR_E_FILENOTFOUND
corerror.h
# MessageText:
DIERR_NOTFOUND
dinput.h
DIERR_OBJECTNOTFOUND
dinput.h
STIERR_OBJECTNOTFOUND
stierr.h
# as an HRESULT: Severity: FAILURE (1), FACILITY_WIN32 (0x7), Code 0x2
# for hex 0x2 / decimal 2
ERROR_FILE_NOT_FOUND
winerror.h
# The system cannot find the file specified.
# 5 matches found for "0x80070002"
I would check a few things:
1) Is the OS activated (Control Panel/System)
2) Is the OS fully patched and has it been rebooted since it was patched?

OVM 3.0.3 - cannot add new server to VLAN group with bonded VLANs

I have a new OVS 3.0.3 server built with 2 bonded interfaces and a single VLAN running on top for the management interface. It gets discovered fine by OVM Manager (I'm running Version: 3.0.3.126, Build: 20111214_126)
I am trying to add it to a VLAN group with two VLANs -- the existing management VLAN (ID=300) plus one other (ID=301). (I already have one identical server assigned to the VLAN group, with both VLAN interfaces configured and running fine.) This works OK, and I can see VLAN 301 for the new server in Oracle VM Manager with no IP address assigned to it.
However, when I try to apply an IP address to the VLAN (via Hardware / Resources / VLAN Groups / Edit VLAN Group / Configure IP Addresses / VLAN Interfaces) it fails with this error:
Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: whyovmprd02 failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/1 ovs_br_config start 0004fb0010be2df bond0.301, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command ['/etc/xen/scripts/ovs-network-bridge', 'start', 'bridge=0004fb0010be2df', 'netdev=bond0.301'] failed (1): stderr: ovs-network-bridge Start: No such device bond0.301
Oracle VM Manager seems to be expecting the subinterface for VLAN 301 to exist on the server already - which it doesn't of course, because the server has just been built, so it only has its management interface VLAN in place (VLAN ID 300)
I have managed to work around this by removing VLAN segment 301 from the VLAN group completely, then adding it back in with the IP addresses for both servers in place. This seems to convince Oracle VM Manager that it needs to create the bond0.301 subinterface before it configures it. However, I obviously had to shut down all VMs to do this, and it was really messy as VLAN 301 is the storage network, so my original server lost contact with the NFS storage for a while which caused it to fence etc.
There must be another way??! Any pointers would be very much appreciated.

Avi Miller wrote:
It's fixed in 3.1. In the meantime, if you can remove and reapply the Virtual Machine role on that network, it'll recreate the bridges for you.Thanks for replying Avi. (I won't ask you for a release date for 3.1 :))
I did try that initially, but it didn't seem to help - I got this error back:
Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: whyovmprd02 failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/1 ovs_if_meta bond0.301 ethernet:0004fb00100a35f{why-be-301}:STORAGE, Status: org.apache.xmlrpc.XmlRpcException: exceptions.Exception:ovs_set_metadata: interface /sys/class/net/bond0.301 does not exists
This appears to be from ovs_if_meta in /opt/ovs-agent-3.0/OVSVMNetConfig.py, which looks to be where the agent tries to write out the new roles for the network into the metadata file - it seems to be expecting the VLAN to exist already, and specifically checks in /sys to make sure that it is there.
Should / could I add a step to my kickstart build to force the 301 VLAN to be created maybe? This would bring it into line with the other VLAN that is used for management, which is of course sitting there ready and waiting as soon as the server is built.

Cannot add printer using HP Jetdirect - Socket

I just bought wireless router D-Link DIR-320 for connect my printer Canon Pixma iP4200.
I can print wirelessly without problem using my PC by installing the provided software for windows.
But when I want to print from my Mac, comes a problem which I cannot install the windows software provided.
Then I research for a solution from:
https://discussions.apple.com/thread/2329236?start=0&tstart=0
The problem is when I add the printer, it says
An error occurred while trying to add the selected printer.
Unable to communicate with the printer at this time.
Does anybody know what the problem is?
Thank you.

This is the screenshot

Cannot add printer- get error message. LaserJet 1200

I recently bought a dual powered MacBook. It was working perfectly, and finding my printer both attached by USB, and wirelessly. It shows up as Bonjour LaserJet 1200. Suddenly, it stopped working, and cannot be added to the printer list. I get an error message,"client error message too long", or some other nonsense. I have several other computers, running OS X, and none of them have any problem sharing the printer, which is connected to an Airport Extreme remote base station. I have tried everything, and come up with no success. So eventhough the printer is recognized, with its address, and is sharable, it suddenly and without cause, cannot be added to the printer list, and thus I cannot print. Any suggestions. Peter
Recent Dual MacBook Mac OS X (10.4.8)

I did. before and I did again. and then uploaded and installed new software and STILL get error 1282. the hp people told me there is nothing they can do it's an apple problem. I'm stumped. If you can think of anything else would appreciate it.

Cannot Add Essbase Server From Admin Services Consol

Hi
I am trying to add a new essbase server to my Admin Services list. I get the following error message:
Error: 1042006: Network error [145]: Unable to connect to [SERVERNAME:1423].
The client timed out waiting to connect to Analytic Services Agent using TCP/IP.
Check your network connections.
Also make sure that server and port values are correct
The essbase services are running on the other machine.. And I can communicate with the other box using FTP etc. So I think I need to get some ports opened between the source and target servers.
Can anyone please tell me what ports should I try to get opened. I read the documentation from help menu and it talks about some server.xml file and also says that you need to specift the port names unless they are something other than defaults. But I am not very clear about this.
Can anyone please help me to figure out what exactly is going wrong ?
Thanks
Mandar Joshi

Review the essbase.cfg on the server machine and look at the SERVERPORTBEGIN and SERVERPORTEND entries. You would want those entries as well as 1423 opened.
For default configurations ensure any firewall has the below ports opened from the client to the server:
TCP/1423
TCP/32768 through TCP/33768
Regards,
John

Cannot add users to roles

I have configured OpenLDAP data store with Access Manager. I can see the users added in LDAP in the Subjects tab of Access Manager, but when I create a role ad try to add users in the role I get the exception
Plug-in com.sun.identity.idm.plugins.files.FilesRepo: Unable to find entry: C:\Documents and Settings\161101\amserver\idRepo\user\frank
Can anybody suggest what is problem

Hi there,
The reason why you have file repo is because you installed the AM using file repo instead of LDAP.
Deleting the File Repo configuration for that realm will not affect the configuration part of the AM ( I would still do a backup ... just in case) because the datastore configuration has nothing to do with that. The configuration part of the AM is at the platform level and you have that configured on the configurations tab of the platform. What I'm sugesting is on that specific Realm ( I usually use a different Realm other than the Root realm ... this way I'm sure not to mess it up ) go to the datastores (which is the place where user data is stored and not the configurations (though they might be the same) ) and delete the file datastore configuration (or point it to a different location ... but do not delete the files on the filesystem, because they are still in use by other Realms and the configuration ) .
Configuration data and User repositories can be configured in different places .... which is what you are now trying to do .... have the conf on the file system and have the users on an LDAP.
Defenetly do a backup of your stuff ... and if at all possible use a different realm other than the root realm.
Hope this helps .... and makes any sense !
Rp

Cannot add print server role

Similar Messages

Maybe you are looking for