Cannot change DPI when exporting a PDF page into a raster image format

Since I installed the Mac OS X 10.5.6 update, I can no longer change the resolution of the images I'm trying to export (for example, PNG or TIFF files) from PDF documents.
The resolution is always set to "150 pixels / inch," and even if I change the amount to lower or higher, or change the unit to "pixels / cm," the document is exported in 150 pixels/inch, while the settings set previously in the "Save As" dialogue to export the file have been reverted.
Is there any workaround?

Let me guess, the DPI is just some data in the metadata of the file, right? I thought I would get more pixels in the image instead. Let's say, an image at 200x300 pixels at 150 ppi would be 400x600 pixels at 300 ppi, which is what I thought it would do.
Am I wrong?

Similar Messages

Indesign ME CS6: Punctuation marks change direction when exporting to PDF

When exporting to PDF (for press) - some punctuation marks (! & ") beahve as if they're "left -> right" (in the PDF only!) instead of "right->left" - as they appear in the open file.

If I understand this correctly, then before you opened a PC-sourced INDD, this never happened? And now it happens with all new files? Was that PC-sourced InDesign file from an English non-ME install of ID?
If doing so is not a big deal for you, I would almost want to suggest the "Nuke it from orbit, it's the only way to be sure" approach coined by Sigourney Weaver's character in Aliens. I.e. something happened to your ME install by simply opening up a non-ME file, and clearing prefs didn't fix it, so I'd be ready to uninstall, run the Adobe Clean tool, and reinstall.
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
I hope that I'm wrong, and that there is some kind of preference that can be tweaked to get this to work correctly. I'd start by removing Font Explorer X entirely. It's also worth trying to make a new user in OS X and seeing if a fresh user experiences the same issue.

Copy formatted text from Pages into Mac Mail loses formatting

Hi,
I have a document template I use in Pages that eventually gets copied into an email for sending (rather than attached, it's the actual email body).
Issue is, when I copy from Pages into Mac Mail, the formatting is horrible.
The closest I have to a workaround, though still not 100% (just way better) is to Export the Pages file to Word format, open the document in Word, copy the text there and paste it into Mac Mail.
It can't be this awkward, can it?
Thanks!

Couple of options:
Use command shift 4 and draw around the table with the mouse curser ~ a png picture of your table will be on your desktop ~ use attach in mail and tick send windows friendly attachments too.
You could also save Numbers as pdf ( Under the print option) and attach that instead.
No doubt there are other ways.
Best

Format Changes when Exporting to PDF

I'm using Crystal 12.0 and have an issue very similar to these threads listed below.
While viewing a report on my development machine, all is fine. I can export to PDF and the formatting is OK.
However, when the report is exported to PDF on the web server, the spacing between some of the text is off. The spacing is used for a CrossTab cell in a "Display String" that I changed using "Format Field." All that's supposed to happen here is several spaces are used to move the text under the proper column.
When exporting to PDF on the web, the text moves over to the left like it's missing some of the spaces. I wondering if the below threads apply to Crystal 12.0.
Thread:1220516 and
Format Changes when Exporting to PDF
Thanks kindly for your assistance,
-Marty

I'm having a very similar problem using Crystal Reports for Visual Studio 2008. Everything is perfect when running in VS 2008, it takes the report and exports it to PDF format via VB code. The PDF file is idenitcal to the report. However, when run on the server the one page report (when exported to PDF) gets chopped into ten 4x4 chunks. So the PDF file is 10 pages....its like puzzle pieces of the original.
I've drawn a bunch of lines on the report to look like boxes - perhaps this is causing issues? The font on the report is Arial.
The server has the 10_5 runtime installed and it is set to the same default printer as the development PC. I have been stuck on this for days and would really appreciate any advice you may have.
Thanks!
Edited by: WanderingEye on Sep 18, 2009 4:54 PM

Preserving links when exporting to PDFs from Pages 5.1

Several people have noted that links do not survive after the first page of a PDF document when exporting from a Pages 5.x document to PDF. *IF* the links are dislayed as html code, they will survive: e.g.
html://www.apple.com
will work on all pages of the PDF document (anyway, it works on page 2!)
But if you edit the link and CHANGE THE DISPLAY NAME, the links will no longer work on page 2 and subsequent pages. E.g., this link will NOT work even though it resolves to the same address (i.e., html://www.apple.com).
apple.com
This is insane, of course. Any work arounds?

Right, I know it will work if you don;t edit the display name. But one often will want to do that. If you were writing a column, say, you might say "In Dick Francis's novel Refusal, the author soes thus and such." That link is clickable. It would work natively in Pages 5, as in Pages 4.3, in a TextEdit document natively or exported to PDF, and in Apple mail, etc. It also works when you export from Pages 4.3 to PDF. In Pages 5, however, it only works (after the first page: who knows why it works on the first page!) if the display name is the same as the html code. This is a bug, or sloppy programming, or both.
I like Page 4.3 quite a lot. I has its limitations but it is simple without being simplistic. I had high hopes for Pages 5. Now that we have 5.1, though, I see that it is just not going to work for me or for my businesses. There are little things like the inability to set the default zoom (which is acutally quite annoying if your eyes are not so hot), the inabilty to see|print comments and big things like the lack of Applescript support, bookmarks, and mail merge. I thought Apple was going to be bringing back these features, but I see now that they are committed to the lowest common denominator. The people who say Apple is is the business of making "toys" are, alas, correct. I guess the business market is not big enough for them. I've actually removed pages 5.1 from all our our macs, and have removed 2.1 from our ios devices. We still have a few stray documents that were created or edited with Pages 5, but I've discovered that you can use Pages for icloud to download a pages file in Word format. Pages 4.3 can open and edit Word files, so that is a (cumbersome) workaround. We'll continue to use 4.3 (and 1.7.2 on the ipad) for the time being, but obviously will need to find something that has current support going forward.

Any ideas on keeping images on master pages consistently high quality display when exporting to pdf?

Any ideas on keeping images on master pages consistently high quality display when exporting to pdf?

Set up the Preflight panel so it checks image resolution. Ask your printer what the appropriate resolution is for your printing process, and set that in Preflight.

Report Title and Text Area issue when exported to pdf using Viewer

Hi there,
We are using OracleBI Discoverer Version 10.1.2.55.26
We have reports that displays Report title containing the following
- Report Title
- Runt Date and Time
- Page No
And text area which displays 'Last Page'
Following properties are set at the worksheet level using page setup
Report Title --> 'Print on every Page'
Text Area --> 'Print on last page'
The report when exported to PDF using Discoverer plus works fine and displays report title and text area as defeined.
But when we try to export the same report to pdf from Discoverer viewer, it displays
- Report title on first page only.
- text area on all pages
All our users accesses report using discoverer viewer so we cannot open discoverer plus to them.
Is there a solution which will enable us to export the report in pdf using discoverer viewer and displays the same output as discoverer plus.
Please let me know... If you have any questions then please feel free to ask.
Thanks in advance for your help...
Manish

but when opened on other os x machines some text is colored differently than it should be
Well, if typographic objects are colour managed, the colour appearance is dependent on the source ICC profile that describes the colourants in the typographic objects and the destination ICC profile that describes the colours the display is able to form and the RBC colourant combinations that will form those colours.
In general, typographic objects should have special treatment, since the expectation is not that typographic objects should be colour managed, but that typographic objects should simple be set to the maximum density of dark. On a display, that is R=0 G=0 B=0 and on a seperations device (a lithographic press) that is C=0 M=0 Y=0 K=100.
If for some reason typographic objects are colour managed, and if the ICC profiles for the displays are off by half a mile or more in relation to the actual state of the display system, then the colours will not be the same. On the other hand, if those displays are calibrated and characterized, then the colourants will be converted to form the same colours on the displays.
/hh

Text wrapping when exporting to .pdf

I'm running Pages 5.2 on OSX 10.9.2. When exporting my document to .pdf, it does not retain it's text wrapping. When viewing the document in Pages, everything is where I put it. When viewing the document as a .pdf after exporting, some of the text will no longer be wrapped around some of the pictures. Which text no longer wraps around which picture changes every time I export, even without altering the document in any way. I have tried grouping the objects and the text together, which only seemed to cause more text to fail to wrap.

I'm using Acrobat X. I've attached a cap of the InDesign poster, and what I get when exporting to PDF -- I lose the title, and "Directed by..." (which is the same type size/color as the playwright). Also, I have overprint preview checked for automatic (and tried all the other settings, too).

InDesign 6: When exporting to PDF - error message fix a pixels/picas

InDesign 6: When exporting to PDF - get error message to go into Preferences and fix a pixels/picas issue - I've been working in the same project for two days and exporting pages all along without this trouble - just started all of a sudden. Haven't changed any settings... How can I fix this?

Fuzzy vector graphics when exporting to PDF?

Hi all,
I've switched to Fireworks from Omnigraffle because I work in a Windows environment and there isn't a Windows-compatible version of Omnigraffle available.
I've noticed that when I export mockups/wireframes that I create in Fireworks to PDF, that the vector images are all fuzzy, as if anti-aliasing has gone overboard. This never happens when I create mocks/frames in Omnigraffle - what I see on the screen is what I get from the printer.
Should I be adjusting my settings in Fireworks somehow, say changing the DPI settings when creating a document, turning anti-aliasing off with text, or anything like that? Is there some magic bullet combination that will give me clean wireframes with crisp, clear edges (including text) in Fireworks?
Thanks so much!

Post Author: vtec
CA Forum: Exporting
We are having a similar issue. Importing a perfectly justified word document as an OLE Object in Crystal. The document seems perfect in the viewer but when exported to PDF, the text seems to overlap each other and there are huge spaces between words. Using Crystal 11 release 2 (version 11.5.8.826). Any help would be greatly appreciated.

How do I set to 300 DPI when exporting?

I have a real problem here. I use an Apple iMac with the base software, iPhoto.
When I export and burn to a CD, the photos are evidently being exported at a very low (72) DPI. I've had complaints from publishers and a stock agency that my images are not at 300 DPI. Yet I cannot figure out how to set DPI when exporting.
One stock agency owner told me to click on "preferences" and look there for where to set DPI. I did so, and found nothing whatsoever about DPI settings. He (the stock agency owner) doesn't use an Apple, so he was probably basing his "preferences" suggestion on where one would go if they were using a Windows-based program, or if one were using Photoshop.
If anyone can tell me how to set the DPI using the software I have I would appreciate it. I don't need to know how to do this in Photoshop or Aperture, as I don't have these programs, and I do not intend to get another editing program. How do you do it using only iPhoto - that's my dilemma.
Thanks!

Tom:
DPI only comes into play when you set a size to be printed. Say you have an image that is 1600 x 1200 pixels in size. iPhoto when exported would report it at 72 dpi and a print size of 22.22 inches x 16.66 inches. If you you wanted a 300 dpi print from that photo you would have to print it at 5.33 inches x 4 inches.
It doesn't make any difference what the dpi is reported as long as the pixel dimensions are large. What size prints are offered by the stock agency? Take the largest that you photos would be offered at and multiple each dimension by 300 to get the number of pixels you would need to provide in the file. For example an 8 x 10 would require a minimum of 2400 x 3000 pixels. An 11 x 14 - 3300 x 4200 pixels.
To get a photo to report a specific dpi it must be set to be printed at a particular size. Photoshop can do that. The print size is included with the other info embedded in the file that would let other image applications see the dpi and the print size. For more info on this read The Myth of DPI. Watch this video screenshot of changing the dpi of a photo in Photoshop. Watch as the print size changes with dpi changing but the pixel dimensions remain the same.
iPhoto cannot set the print size for exporting.
Bottom line: if you were to provide an image at 3300 x 4200 pixels (an 11x14) it should be sufficient for any size up to that size. Photoshop Elements for Mac, at $79 (Amazon.com) has about 75% of Photoshop's capabilities at 1/7 the cost. It's really a very powerful, consumer oriented image editor. Ask them what the minimum pixel dimensions are for the photos.

Problem with subscript and superscript in tables when exporting in .pdf

When I put some words in superscript (or subscript) in a table, a bug occurs when exporting in pdf (whit export or print either). All the words in the cell after the subscript part disappear in the pdf version. The rest of the table or the document isn't affected. It's really strange and it has occured since I shifted for the 5 version of Pages...
I've no idea what to do...

Pyregnier wrote:
I've no idea what to do...
It is a long standing bug in Pages 5.
Pages '09 should still be in your Applications/iWork folder.
Peter

Any way to reduce the resolution when exporting to .pdf

We are emailing reports. On some reports with a large number of jpegs we are hitting a size limitation. It would be helpful to reduce the resolution on the jpegs when exporting to .pdf. Any way that would be possible?

Hi,
Need more info-
VS version? or the developing application?
CR Version? Are you directly emailing your reports from CR designer?
Also once the image is fetched by the report, we can not make any changes in the image, as a work around you need to do required changes in the image before adding it to the reports, and as far as I know it is not possible through code, but we can wait for other responses though.
Sincerely,
Amit

Is it possible to embed video in keynote presentation when exporting to .pdf?

Is it possible to embed video in keynote presentation when exporting to .pdf?

You can place the video in Keynote but it will be exported as a still.Adobe Acrobat Pro is needed to embed video in a PDF page.

Lines when exporting to PDF (in print)

Hello,
I have an indesign document with several transparent layers (light grey layers).
They all show fine on screen, and print perfect here. But when sending it to the printshop I ran into some white hairlines.
When exporting to PDF X/1a I get loads (transparency flattened), when exporting to PDF X/4 I do get a slight edge (in white) where the gradient transparency ends.
I do believe this issue is at the printer end, but 'yes we use PDF' was the only input I got from them.
Again, they print just fine on my home printer, but don't with the 'pro' printing company my company uses :s
Any advice, besides exporting to tiffs on those pages?
Thanks!

I could paste the graphic with fade in photoshop and match the background.
The think is, the front cover for example has more transparency and layers and prints just fine.
Does stitching occur more on lighter objects and backgrounds?
I obviously can't trust the printer we're using to handle the flattening so we'll have to use a workaround.
Thanks

Cannot change DPI when exporting a PDF page into a raster image format

Similar Messages

Maybe you are looking for