Cannot change KDE menu entries

Hi all!
I installed Enemy Territory and I wanted to edit the menu entry in KDE.
I command from et to et2, an edited version of et.
When I save the menu and look back I see the entry has not changed.
How can I get KDE to remember my changes?
I use KDE 3.3.2 and Arch 0.7
Thanks!

try this:
cd ~/.kde
find |grep :
If you see a quite long path with a number of colons, that is the problem. This happened to me on both the current KDE, 3.2 and 3.1. I don't know the reason WHY it happens, but deleting the path fixed my problems with the menu.

Similar Messages

Emesene no kde menu entry anymore?

Didn't see any posts that looked relevent in the past few days. Since my last update, emesene has gone missing from my kde menu. It is still installed, and still works, but the nice convenient launcher in the menu has gone AWOL. Anyone else notice this? I tried doing a pacman -Rus emesene to remove everything and then reinstalling, but still gone.
I'd prefer not to create the launcher myself as in the past when I've manually created Kmenu entries it always ends up throwing the whole menu out of whack.
Obviously, not a GIANT issue, but would be convenient to be able to fix it.

Didn't see any posts that looked relevent in the past few days. Since my last update, emesene has gone missing from my kde menu. It is still installed, and still works, but the nice convenient launcher in the menu has gone AWOL. Anyone else notice this? I tried doing a pacman -Rus emesene to remove everything and then reinstalling, but still gone.
I'd prefer not to create the launcher myself as in the past when I've manually created Kmenu entries it always ends up throwing the whole menu out of whack.
Obviously, not a GIANT issue, but would be convenient to be able to fix it.

Menu entry not displayes

Hi everyone!
We use NW2004s SP9 Java (Sneak Preview). I created a user and assigned a collective role: user_role -> user
Within "user_role" there are several roles that represent menu entries. This is just to simplify user administration. By assigning "user_role" to a user, he will have all the encluded menu entries at once!
So, each of these included roles are set es entry points. When I log on to the portal as the respective user, no menu entries are displayed. Can anybody explain this behaviour?
Here's the structure of "user_role":
user_role
-> included_role_one
-> included_role_two
-> ...
When I assign the subsequent roles (included_role_one, included_role_two, ...) directly to the user, they are displayed as menu entries. But when I include them into another role (user_role) and assign this one to the user, nothing is displayed.
What do I have to do in order to display the menu entries?

OK, I just played around a bit and it's still not working.
Just one more example to clearify what I want to do.
role: "Account Manager" (for all users that are account managers)
   -> role: "Accounts" (set as entry point for displaying the menu entry)
       -> workset: "Customers" (will be displayed in the second level navigation)
           -> iView: "Display Customer" (will be displayed in side navigation)
           -> iView: "Change Customer" (will be displayed in side navigation)
       -> workset: "Contact Persons" (will be displayed in the second level navigation)
           -> ...
   -> role: "Products" (set as entry point for displaying the menu entry)
           -> ...
With this approach I just have to assign the role "Account Manager" to a user and he has all the menu entries he needs. If I want to make changes (add or remove functionality), I only need to update one role for all account managers within the company.
So, I guess its no use to set the role "Account Manager" as an entry point but the subsequent roles for each menu entry ("Accounts", "Products", etc.) that should be displayed in the top level navigation.
I just created a group "Account Manager" and added the user "Account Manager" to that group. Then I assigned a role "Account Manager" to that group" This role contains all the roles for the menu entries. Every role that should be displayed in the top navigation is set as entry point but not the collective role "Account Manager".
Nothing is displayed. If I set the role "Account Manager" as entry point nothing changes. Menu entries are only displayed when I assign the subsequent roles ("Accounts", "Products") to the user directly.
I really don't know what to do in order to change this behaviour...

Kde menu lost

I guess with last upgrade i lost every single kde-menu entry. Y use xfce and have minimal kde pkgs installed, so i just noticed it because there where no k3b and amarok in my xfce menu.
I removed kde from my system (also every config file i found) and reinstalled it, both extra and testing to check if there where something wrong with testing packages.
Running kde it shows no apps in menu, just control panel, execute and log out. Trying to run control panel does nothing.
I'm able to run every app from console.
I don't know what else can i do, i would really appreciate some help...

First of all, thanks for replying.
I ran it different ways, as root and as user, with and without options (--noncremental, --global, --nocheckfiles, --menutest) and always got almost the same errors:
As user:
[martin@myhost ~]$ kbuildsycoca
kbuildsycoca running...
Reusing existing ksycoca
kbuildsycoca: WARNING: Load error ()
kbuildsycoca: WARNING: 'ark_part.desktop' specifies undefined mimetype/servicetype 'application/x-tbz2'
kbuildsycoca: WARNING: 'karm_part.desktop' specifies undefined mimetype/servicetype 'text/english'
kbuildsycoca: WARNING: 'karm_part.desktop' specifies undefined mimetype/servicetype 'text/x-c'
kbuildsycoca: WARNING: 'karm_part.desktop' specifies undefined mimetype/servicetype 'text/x-c++'
kbuildsycoca: WARNING: 'kcertpart.desktop' specifies undefined mimetype/servicetype 'application/binary-certificate'
kbuildsycoca: WARNING: 'katepart.desktop' specifies undefined mimetype/servicetype 'text/x-fortran'
kbuildsycoca: WARNING: 'knotify.desktop' specifies undefined mimetype/servicetype 'KNotify'
kbuildsycoca: WARNING: 'gvimagepart.desktop' specifies undefined mimetype/servicetype 'image/x-krl'
As root:
[root@myhost martin]# kbuildsycoca
Warning: kbuildsycoca is unable to register with DCOP.
kbuildsycoca running...
kbuildsycoca running...
Reusing existing ksycoca
kbuildsycoca: WARNING: Load error ()
KWrited - Listening on Device /dev/pts/3
kbuildsycoca: WARNING: 'ark_part.desktop' specifies undefined mimetype/servicetype 'application/x-tbz2'
kbuildsycoca: WARNING: 'karm_part.desktop' specifies undefined mimetype/servicetype 'text/english'
kbuildsycoca: WARNING: 'karm_part.desktop' specifies undefined mimetype/servicetype 'text/x-c'
kbuildsycoca: WARNING: 'karm_part.desktop' specifies undefined mimetype/servicetype 'text/x-c++'
kbuildsycoca: WARNING: 'kcertpart.desktop' specifies undefined mimetype/servicetype 'application/binary-certificate'
kbuildsycoca: WARNING: 'katepart.desktop' specifies undefined mimetype/servicetype 'text/x-fortran'
kbuildsycoca: WARNING: 'knotify.desktop' specifies undefined mimetype/servicetype 'KNotify'
kbuildsycoca: WARNING: 'gvimagepart.desktop' specifies undefined mimetype/servicetype 'image/x-krl'
And the menu keeps empty.

PFCG menu cannot change

Hi
I have a problem with regards to a role from which i want to unassign a t code.
The system does not allow me to edit the menu in the PFCG screen and tells me
Customizing projects are assigned and menu cannot be changed.
I have checked the is no customizing projects in SPRO_ADMIN. Could anyone help me by telling how i can edit this role menu.
Many Thanks
Deb SIrcar

Hello Deb,
as long a cusotmizing project is assigned, it is not possible to edeit the menu.
To remove this assignement:
Pfcg->edit->tab menu
Menu->Utilities->Customizing auth.
The status in the popup will say now 'A Customizing object is assigned'.
Press the trash button.('Delete').
You will see in the next popup the project, which is assigned. Remove the check flag and press 'ok' (2x).
the connection to the project is now removed (together with the menu entries of that project of course).
To create inconsistencies by directly deleting the entry in table agr_custom to be able to edit the existing menu, I really do not suggest...
b.rgds, Bernhard

Cannot change my printer preferences

Dear Hp technicians:
Hi I'm from Mexico and I just loged in to my hp e-print center and it took me here. My problem is I find it really difficult to log in from my country coz' hp connected doesn't work, it simply just don't let my Log in. I found that visiting hp connected-uk is the only way to log in. But then, I'm loged in, but I cannot change my printer preference coz' the button doesn't exist, the one that used to say "Change setting" is now just simple text. How can I go back to e-print center instead of HP connected..... Please this is driving me crazy!
I need your help

Hi there, if you've updated your ePrintCenter account to HP Connected you can't revert back. Check out this thread for more information on the change from ePC to HP Connected http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/HP-Connected-Support...
Can you reply with a screenshot showing exactly what it is you're trying to change? Is it a setting of a printer in the Device tab or is it something in the "Settings" dropdown menu at the top right of the screen below?
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Windows 8.1 cannot change password in Windows 2003 domain level domain

On several installations of windows 8.1 enterprise, users cannot change passwords by using <ctrl> + <al> + <del> keys and choosing change password.
The error is: "The security database on the server does not have a computer account for this workstation trust relationship"
Fresh Windows 8.1 enterprise installs with no patches to fully patched windows 8.1 enterprise workstations have the problem. Backed out patches one by one and tested password change without success. Tried various dell laptops, tablets, and workstations
but same issue. Tried VMware guest workstation with windows 8.1 enterprise. The domain functional level is 2003 with a mixture of Windows 2008 R2 DC's and Windows 2003 DC's.
The add/remove from domain did not help. What troubleshooting steps should I take from this point? Is this related to secure channel failures? Note: did not find event log entries for the failures in the DC's nor on the workstation.
Perhaps I did not search for the proper entry on the DC's.

Hi,
Please find below several possible cause of error “The security database on the server does
not have a computer account for this workstation trust relationship”
Secure channel is broken (Can fix by rejoin problematic client to domain)
AD replication issue. The computer account exists on one domain controller but not others.
Duplicated SPN (seems not possible)
So, to narrow down the issue, you need to make sure the AD replication is working fine. Please run command
repadmin /showrepl * on a DC, then post the result here.
After that, please run
set l on a problematic client, then post the result here.
Moreover, please check on system event log and check if there have any related error of the issue.
Thanks.

Why does debugger menu entry not exist in Acrobat 7.1.0

Today I decided to start using the JavaScript functionality of my Acrobat 7.1.0 (updated a few days ago from 7.0.x). First I searched for some documentation and found the original "Acrobat JavaScript Scripting Guide" for Acrobat 7.0, document release date July 19, 2005. What made me doubt about the quality of my environment is that there are always some features mentioned that do not at all exist in my Acrobat, such as menu entries like "Debugger" under "Advanced - Javascript". The only thing I find there is "define document actions" (menu entry translated from German). Reading other posts in this forum concerning Javascript I searched other places like acrobatusers.com and, checking the tutorials, I saw screenshots of preference screens containing more items than my ones, especially more items in the "debugger" panel of the "Javascript" entry. When searching places on my drive where Acrobat should expect JavaScript files like "Program Files\Adobe\Acrobat 7.0\Acrobat\Javascripts" I remember having read that there should be more files than just "Websearch.js" and "JSByteCodeWin.bin" (as it is in my case; but I'm not sure what actually should be there further).
So far the only thing I can do to open the console is defining some action related with files (but only unhandy ones like "when closed" or "when saved"). The only way I know to open the JS debugger is defining invalid JS code for some file action and perform this action, then the debugger shows up along with the console, complaining.
Strolling arround in my Acrobat program subdirectories I found documentation and a runnable named "ExtendedScript Toolkit" that seemed to work well (though I could not try it out seriously as it obviously is quite complicated because it relies on the InDesign object model). Did ExtendedScripting coming along with InDesign spoil my normal JavaScript environment in Acrobat? Or was it the update from Acrobat 7.0.0 to 7.1.0? How can it be that menu entries everybody else is talking about are not at all visible in my installation though I desparately enabled almost everything in my Acrobat preference settings? Are there some paranoid web security defaults making entries disappear in my installation?
Any suggestions will be greatly appreciated!
Richard

Bernd,
the matrix is for Acrobat 9 only and thus not totally liable. However, as for V9 the topic of scripting or debugging is not even touched in the whole matrix, one might suggest that V7 would also make no differences in that area.
I am only guessing, but the fact that I do not find any hint about a problem similar to my one might have to do something with the "ExtendedScript Toolkit" I mentioned above. If the behavior of my Acrobat installation had been changed due to installing ExtendedScript, this would be a kind of (intended) bug most users would not complain about, because: ExtendedScript comes along with software like InDesign, and the typical ID user is not the one developing JavaScript under Acrobat.
Searching Google for ExtendedScript I found the Adobe download area and clicking on the item it says:
The ExtendScript Toolkit (ESTK) 1.0.3 is a scripting utility included with Adobe® Creative Suite 2 and other Adobe applications. The ESTK is used for creating, editing, and debugging JavaScript to be used for scripting Adobe applications.
Looking up documentation on ExtendedScript (which was not very easy to find) I noticed some examples about adding a document to the target application by executing the line:
app.document.add();
As I am starting the ES toolkit as an own main program, I am getting the error message that this call is not executable for the target application "main", which I can accept. Maybe there is a way connecting Acrobat to ExtendedScript, maybe there is even a way to reanimate "normal" scripting, maybe normal scripting is not even unconscious but only sleeping and can be woken up easily ...
Maybe the best way to find out is searching for a forum about scripting (albeit extended or normal). Funny, though, that my Acrobat does not at all match the original scripting documentation of Adobe concerning such elementary things like menu entries being present (especially see second attachment: "Erweitert" translates to "Advanced", "Dokument-Aktionen festlegen" to "Define document actions". Where is the "Debugger" entry???).
If I believe others here in this forum saying that the "Debugger" entry normally is appearing in the Javascript menu. Obviously the Acrobat software contains program code to hide or remove this entry permanently. Furthermore, somebody else, also a member of the Adobe stuff, has written the documentation that does not at all contain any applying description of conditions about hiding the menu entry. What I would appreciate is if Adobe would make those two persons talk to each other about what they are doing. By that, other people like me could save a lot of time.

Monitor setup has changed - KDE Daemon after sleep

After the monitor goes into powersave mode and is restored I keep gettung the Monitor setup has changed - KDE Daemon box, anyone know how to get rid of this? everything seams to work but the box is getting annoying. Logs dont show anything wrong and I have tried lots of things to fix it with no solution.

Ok still cant work this out. manually set monitor settings etc the box still pops up when waking monotor from sleep. logs still show nothing. Can anyone help?
Log below
[ 11.918]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 11.918]
X.Org X Server 1.13.2.901 (1.13.3 RC 1)
Release Date: 2013-02-15
[ 11.918] X Protocol Version 11, Revision 0
[ 11.918] Build Operating System: Linux 3.7.5-1-ARCH x86_64
[ 11.918] Current Operating System: Linux ThunderBolt.LoadBalancer.Org 3.7.9-2-ARCH #1 SMP PREEMPT Mon Feb 25 12:04:25 CET 2013 x86_64
[ 11.918] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bc60faad-b008-4f1f-8682-88d4c6f235cc ro quiet
[ 11.918] Build Date: 18 February 2013 03:52:56PM
[ 11.918]
[ 11.918] Current version of pixman: 0.28.2
[ 11.918] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.918] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.918] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 6 17:45:33 2013
[ 12.161] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 12.326] (==) ServerLayout "ServerLayout0"
[ 12.326] (==) No screen section available. Using defaults.
[ 12.326] (**) |-->Screen "Default Screen Section" (0)
[ 12.326] (**) | |-->Monitor "<default monitor>"
[ 12.326] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 12.326] (**) | |-->Device "Intel Graphics"
[ 12.326] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 12.326] (**) Option "BlankTime" "0"
[ 12.326] (**) Option "StandbyTime" "0"
[ 12.326] (**) Option "SuspendTime" "0"
[ 12.326] (**) Option "OffTime" "0"
[ 12.326] (==) Automatically adding devices
[ 12.326] (==) Automatically enabling devices
[ 12.326] (==) Automatically adding GPU devices
[ 12.513] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 12.513] Entry deleted from font path.
[ 12.561] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 12.561] Entry deleted from font path.
[ 12.561] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 12.561] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 12.561] Entry deleted from font path.
[ 12.561] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 12.561] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 12.561] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12.561] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12.562] (II) Loader magic: 0x7fcc20
[ 12.562] (II) Module ABI versions:
[ 12.562] X.Org ANSI C Emulation: 0.4
[ 12.562] X.Org Video Driver: 13.1
[ 12.562] X.Org XInput driver : 18.0
[ 12.562] X.Org Server Extension : 7.0
[ 12.562] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 12.563] (--) PCI:*(0:0:2:0) 8086:2e22:1025:0251 rev 3, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8
[ 12.563] (--) PCI: (0:0:2:1) 8086:2e23:1025:0251 rev 3, Mem @ 0xfe900000/1048576
[ 12.762] Initializing built-in extension Generic Event Extension
[ 12.763] Initializing built-in extension SHAPE
[ 12.763] Initializing built-in extension MIT-SHM
[ 12.763] Initializing built-in extension XInputExtension
[ 12.763] Initializing built-in extension XTEST
[ 12.763] Initializing built-in extension BIG-REQUESTS
[ 12.763] Initializing built-in extension SYNC
[ 12.763] Initializing built-in extension XKEYBOARD
[ 12.763] Initializing built-in extension XC-MISC
[ 12.763] Initializing built-in extension SECURITY
[ 12.763] Initializing built-in extension XINERAMA
[ 12.763] Initializing built-in extension XFIXES
[ 12.763] Initializing built-in extension RENDER
[ 12.763] Initializing built-in extension RANDR
[ 12.763] Initializing built-in extension COMPOSITE
[ 12.763] Initializing built-in extension DAMAGE
[ 12.763] Initializing built-in extension MIT-SCREEN-SAVER
[ 12.763] Initializing built-in extension DOUBLE-BUFFER
[ 12.763] Initializing built-in extension RECORD
[ 12.763] Initializing built-in extension DPMS
[ 12.763] Initializing built-in extension X-Resource
[ 12.763] Initializing built-in extension XVideo
[ 12.763] Initializing built-in extension XVideo-MotionCompensation
[ 12.763] Initializing built-in extension XFree86-VidModeExtension
[ 12.763] Initializing built-in extension XFree86-DGA
[ 12.763] Initializing built-in extension XFree86-DRI
[ 12.763] Initializing built-in extension DRI2
[ 12.763] (II) LoadModule: "glx"
[ 12.816] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12.828] (II) Module glx: vendor="X.Org Foundation"
[ 12.829] compiled for 1.13.2.901, module version = 1.0.0
[ 12.829] ABI class: X.Org Server Extension, version 7.0
[ 12.829] (==) AIGLX enabled
[ 12.829] Loading extension GLX
[ 12.829] (II) LoadModule: "intel"
[ 12.853] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 13.078] (II) Module intel: vendor="X.Org Foundation"
[ 13.078] compiled for 1.13.2.901, module version = 2.21.3
[ 13.079] Module class: X.Org Video Driver
[ 13.079] ABI class: X.Org Video Driver, version 13.1
[ 13.079] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 13.079] (++) using VT number 7
[ 13.213] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13.213] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 13.213] (==) intel(0): RGB weight 888
[ 13.213] (==) intel(0): Default visual is TrueColor
[ 13.213] (**) intel(0): Option "AccelMethod" "sna"
[ 13.213] (--) intel(0): Integrated Graphics Chipset: Intel(R) G45/G43
[ 13.213] (**) intel(0): Framebuffer tiled
[ 13.213] (**) intel(0): Pixmaps tiled
[ 13.213] (**) intel(0): "Tear free" disabled
[ 13.213] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 13.253] (II) intel(0): Output VGA1 has no monitor section
[ 13.362] (II) intel(0): Output HDMI1 using monitor section HDMI1
[ 13.403] (II) intel(0): Output DP1 has no monitor section
[ 13.443] (II) intel(0): EDID for output VGA1
[ 13.552] (II) intel(0): EDID for output HDMI1
[ 13.552] (II) intel(0): Manufacturer: GSM Model: 56cc Serial#: 258443
[ 13.552] (II) intel(0): Year: 2011 Week: 4
[ 13.552] (II) intel(0): EDID Version: 1.3
[ 13.552] (II) intel(0): Digital Display Input
[ 13.552] (II) intel(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 13.552] (II) intel(0): Gamma: 2.20
[ 13.552] (II) intel(0): No DPMS capabilities specified
[ 13.552] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 13.552] (II) intel(0): First detailed timing is preferred mode
[ 13.552] (II) intel(0): redX: 0.635 redY: 0.342 greenX: 0.292 greenY: 0.611
[ 13.552] (II) intel(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 13.552] (II) intel(0): Supported established timings:
[ 13.552] (II) intel(0): 640x480@60Hz
[ 13.552] (II) intel(0): 800x600@60Hz
[ 13.552] (II) intel(0): 1024x768@60Hz
[ 13.552] (II) intel(0): Manufacturer's mask: 0
[ 13.552] (II) intel(0): Supported standard timings:
[ 13.552] (II) intel(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 13.552] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 13.552] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 13.552] (II) intel(0): Supported detailed timing:
[ 13.552] (II) intel(0): clock: 138.5 MHz Image Size: 531 x 299 mm
[ 13.552] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 13.552] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 13.552] (II) intel(0): Supported detailed timing:
[ 13.552] (II) intel(0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 13.552] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 13.552] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 13.552] (II) intel(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[ 13.552] (II) intel(0): Monitor name: W2442
[ 13.552] (II) intel(0): Supported detailed timing:
[ 13.552] (II) intel(0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 13.552] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 13.552] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 13.552] (II) intel(0): Supported detailed timing:
[ 13.552] (II) intel(0): clock: 74.2 MHz Image Size: 531 x 299 mm
[ 13.552] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 13.552] (II) intel(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 13.552] (II) intel(0): Supported detailed timing:
[ 13.552] (II) intel(0): clock: 74.2 MHz Image Size: 531 x 299 mm
[ 13.552] (II) intel(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 13.552] (II) intel(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 13.552] (II) intel(0): Supported detailed timing:
[ 13.552] (II) intel(0): clock: 27.0 MHz Image Size: 531 x 299 mm
[ 13.552] (II) intel(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 13.552] (II) intel(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 13.552] (II) intel(0): Number of EDID sections to follow: 1
[ 13.552] (II) intel(0): EDID (in hex):
[ 13.552] (II) intel(0): 00ffffffffffff001e6dcc568bf10300
[ 13.552] (II) intel(0): 0415010380351e780aaec5a2574a9c25
[ 13.552] (II) intel(0): 125054210800b3008180814001010101
[ 13.552] (II) intel(0): 0101010101011a3680a070381f403020
[ 13.552] (II) intel(0): 3500132b2100001a023a801871382d40
[ 13.552] (II) intel(0): 582c4500132b2100001e000000fd0038
[ 13.552] (II) intel(0): 3d1e530f000a202020202020000000fc
[ 13.552] (II) intel(0): 0057323434320a202020202020200128
[ 13.552] (II) intel(0): 020321f14e900403011412051f101300
[ 13.552] (II) intel(0): 000000230907078301000065030c0010
[ 13.552] (II) intel(0): 00023a801871382d40582c4500132b21
[ 13.552] (II) intel(0): 00001e011d8018711c1620582c250013
[ 13.552] (II) intel(0): 2b2100009e011d007251d01e206e2855
[ 13.552] (II) intel(0): 00132b2100001e8c0ad08a20e02d1010
[ 13.552] (II) intel(0): 3e9600132b2100001800000000000000
[ 13.552] (II) intel(0): 00000000000000000000000000000026
[ 13.552] (II) intel(0): Printing probed modes for output HDMI1
[ 13.552] (II) intel(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 13.552] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 13.552] (II) intel(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 13.552] (II) intel(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 13.552] (II) intel(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 13.552] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 13.552] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
[ 13.552] (II) intel(0): Modeline "1400x1050"x59.9 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[ 13.552] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 13.552] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 13.552] (II) intel(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 13.552] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 13.552] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
[ 13.552] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 13.552] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 13.552] (II) intel(0): Modeline "1280x768"x60.0 68.25 1280 1328 1360 1440 768 771 778 790 +hsync -vsync (47.4 kHz e)
[ 13.552] (II) intel(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 13.552] (II) intel(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 13.552] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 13.552] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 13.552] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 13.552] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 13.552] (II) intel(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 13.552] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 13.552] (II) intel(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 13.552] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 13.552] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 13.593] (II) intel(0): EDID for output DP1
[ 13.593] (II) intel(0): Output VGA1 disconnected
[ 13.593] (II) intel(0): Output HDMI1 connected
[ 13.593] (II) intel(0): Output DP1 disconnected
[ 13.593] (II) intel(0): Using exact sizes for initial modes
[ 13.593] (II) intel(0): Output HDMI1 using initial mode 1920x1080
[ 13.593] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 13.593] (==) intel(0): DPI set to (96, 96)
[ 13.593] (II) Loading sub module "dri2"
[ 13.593] (II) LoadModule: "dri2"
[ 13.593] (II) Module "dri2" already built-in
[ 13.593] (==) Depth 24 pixmap format is 32 bpp
[ 13.793] (II) intel(0): SNA initialized with Broadwater/Crestline backend
[ 13.793] (==) intel(0): Backing store disabled
[ 13.793] (==) intel(0): Silken mouse enabled
[ 13.793] (II) intel(0): HW Cursor enabled
[ 13.793] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 13.794] (==) intel(0): DPMS enabled
[ 13.794] (II) intel(0): Overlay video not supported on this hardware
[ 13.794] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 13.794] (II) intel(0): [DRI2] Setup complete
[ 13.794] (II) intel(0): [DRI2] DRI driver: i965
[ 13.794] (II) intel(0): direct rendering: DRI2 Enabled
[ 13.794] (==) intel(0): hotplug detection: "enabled"
[ 13.794] (--) RandR disabled
[ 14.124] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 14.124] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 14.124] (II) AIGLX: enabled GLX_ARB_create_context
[ 14.124] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 14.124] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 14.124] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 14.124] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 14.124] (II) AIGLX: Loaded and initialized i965
[ 14.124] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 14.125] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 14.210] (II) intel(0): Setting screen physical size to 508 x 285
[ 14.922] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 14.922] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.922] (II) LoadModule: "evdev"
[ 14.922] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.957] (II) Module evdev: vendor="X.Org Foundation"
[ 14.957] compiled for 1.13.0, module version = 2.7.3
[ 14.957] Module class: X.Org XInput Driver
[ 14.957] ABI class: X.Org XInput driver, version 18.0
[ 14.957] (II) Using input driver 'evdev' for 'Power Button'
[ 14.957] (**) Power Button: always reports core events
[ 14.957] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 14.957] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.957] (--) evdev: Power Button: Found keys
[ 14.957] (II) evdev: Power Button: Configuring as keyboard
[ 14.957] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 14.957] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 14.957] (**) Option "xkb_rules" "evdev"
[ 14.957] (**) Option "xkb_model" "evdev"
[ 14.957] (**) Option "xkb_layout" "us"
[ 14.988] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 14.988] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.988] (II) Using input driver 'evdev' for 'Power Button'
[ 14.988] (**) Power Button: always reports core events
[ 14.988] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 14.988] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.988] (--) evdev: Power Button: Found keys
[ 14.989] (II) evdev: Power Button: Configuring as keyboard
[ 14.989] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 14.989] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 14.989] (**) Option "xkb_rules" "evdev"
[ 14.989] (**) Option "xkb_model" "evdev"
[ 14.989] (**) Option "xkb_layout" "us"
[ 14.989] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 14.989] (II) config/udev: Adding input device UVC Camera (046d:0825) (/dev/input/event14)
[ 14.989] (**) UVC Camera (046d:0825): Applying InputClass "evdev keyboard catchall"
[ 14.989] (II) Using input driver 'evdev' for 'UVC Camera (046d:0825)'
[ 14.989] (**) UVC Camera (046d:0825): always reports core events
[ 14.989] (**) evdev: UVC Camera (046d:0825): Device: "/dev/input/event14"
[ 14.989] (--) evdev: UVC Camera (046d:0825): Vendor 0x46d Product 0x825
[ 14.989] (--) evdev: UVC Camera (046d:0825): Found keys
[ 14.989] (II) evdev: UVC Camera (046d:0825): Configuring as keyboard
[ 14.989] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input14/event14"
[ 14.989] (II) XINPUT: Adding extended input device "UVC Camera (046d:0825)" (type: KEYBOARD, id 8)
[ 14.989] (**) Option "xkb_rules" "evdev"
[ 14.989] (**) Option "xkb_model" "evdev"
[ 14.989] (**) Option "xkb_layout" "us"
[ 14.990] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[ 14.990] (II) No input driver specified, ignoring this device.
[ 14.990] (II) This device may have been added with another device file.
[ 14.990] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event10)
[ 14.990] (II) No input driver specified, ignoring this device.
[ 14.990] (II) This device may have been added with another device file.
[ 14.991] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event11)
[ 14.991] (II) No input driver specified, ignoring this device.
[ 14.991] (II) This device may have been added with another device file.
[ 14.991] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event12)
[ 14.991] (II) No input driver specified, ignoring this device.
[ 14.991] (II) This device may have been added with another device file.
[ 14.991] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event13)
[ 14.991] (II) No input driver specified, ignoring this device.
[ 14.991] (II) This device may have been added with another device file.
[ 14.991] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event6)
[ 14.991] (II) No input driver specified, ignoring this device.
[ 14.991] (II) This device may have been added with another device file.
[ 14.992] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7)
[ 14.992] (II) No input driver specified, ignoring this device.
[ 14.992] (II) This device may have been added with another device file.
[ 14.992] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event8)
[ 14.992] (II) No input driver specified, ignoring this device.
[ 14.992] (II) This device may have been added with another device file.
[ 14.992] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event9)
[ 14.992] (II) No input driver specified, ignoring this device.
[ 14.992] (II) This device may have been added with another device file.
[ 14.993] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 14.993] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.993] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 14.993] (**) AT Translated Set 2 keyboard: always reports core events
[ 14.993] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 14.993] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 14.993] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 14.993] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 14.993] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 14.993] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 14.993] (**) Option "xkb_rules" "evdev"
[ 14.993] (**) Option "xkb_model" "evdev"
[ 14.993] (**) Option "xkb_layout" "us"
[ 14.993] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event5)
[ 14.993] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 14.993] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 14.993] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 14.993] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
[ 14.993] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[ 14.993] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 14.993] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 14.993] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[ 14.993] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 14.993] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 14.993] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 14.994] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 14.994] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.994] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[ 14.994] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 10)
[ 14.994] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 14.994] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 14.994] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 14.994] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 14.994] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 14.994] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[ 14.994] (II) No input driver specified, ignoring this device.
[ 14.994] (II) This device may have been added with another device file.
[ 14.994] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 14.994] (II) No input driver specified, ignoring this device.
[ 14.994] (II) This device may have been added with another device file.
[ 23.841] (II) intel(0): EDID vendor "GSM", prod id 22220
[ 23.841] (II) intel(0): Using EDID range info for horizontal sync
[ 23.841] (II) intel(0): Using EDID range info for vertical refresh
[ 23.841] (II) intel(0): Printing DDC gathered Modelines:
[ 23.841] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 23.841] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 23.842] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 23.842] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 23.842] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 23.842] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 23.842] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 23.842] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 23.842] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 23.842] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 23.842] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 23.842] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 23.842] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 23.842] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 23.842] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 23.842] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 23.842] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 23.884] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 24.108] (II) intel(0): EDID vendor "GSM", prod id 22220
[ 24.108] (II) intel(0): Using hsync ranges from config file
[ 24.108] (II) intel(0): Using vrefresh ranges from config file
[ 24.108] (II) intel(0): Printing DDC gathered Modelines:
[ 24.108] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 24.108] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 24.108] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 24.108] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 24.108] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 24.108] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 24.108] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 24.108] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 24.108] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 24.108] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 24.108] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 24.108] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 24.108] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 24.108] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 24.108] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 24.108] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 24.108] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 33.191] (II) intel(0): EDID vendor "GSM", prod id 22220
[ 33.191] (II) intel(0): Using hsync ranges from config file
[ 33.191] (II) intel(0): Using vrefresh ranges from config file
[ 33.191] (II) intel(0): Printing DDC gathered Modelines:
[ 33.191] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 33.191] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 33.191] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 33.191] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 33.191] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 33.191] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 33.191] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 33.191] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 33.191] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 33.191] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 33.192] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 33.192] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 33.192] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 33.192] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 33.192] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 33.192] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 33.192] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 40.998] (II) intel(0): EDID vendor "GSM", prod id 22220
[ 40.998] (II) intel(0): Using hsync ranges from config file
[ 40.998] (II) intel(0): Using vrefresh ranges from config file
[ 40.998] (II) intel(0): Printing DDC gathered Modelines:
[ 40.998] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 40.998] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 40.998] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 40.998] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 40.998] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 40.998] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 40.998] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 40.998] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 40.998] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 40.998] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 40.998] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 40.998] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 40.998] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 40.998] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 40.998] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 40.998] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 40.998] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 936.094] (II) evdev: ImPS/2 Generic Wheel Mouse: Close
[ 936.094] (II) UnloadModule: "evdev"
[ 936.094] (II) evdev: AT Translated Set 2 keyboard: Close
[ 936.094] (II) UnloadModule: "evdev"
[ 936.094] (II) evdev: UVC Camera (046d:0825): Close
[ 936.094] (II) UnloadModule: "evdev"
[ 936.094] (II) evdev: Power Button: Close
[ 936.094] (II) UnloadModule: "evdev"
[ 936.094] (II) evdev: Power Button: Close
[ 936.094] (II) UnloadModule: "evdev"
[ 936.194] Server terminated successfully (0). Closing log file.
kde log
Note that your system uses syslog. All of kdm's internally generated messages
(i.e., not from libraries and external programs/scripts it uses) go to the
daemon.* syslog facility; check your syslog configuration to find out to which
file(s) it is logged. PAM logs messages related to authentication to authpriv.*.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(7126) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(7120)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(7120)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
klauncher(7543) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(7537)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(7537)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
kdmgreet: Fatal IO error: client killed
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(326) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(285)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(285)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(341) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(294)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(294)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(273) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(264)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(264)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: Can't find file "uk" for symbols include
> Exiting
> Abandoning symbols file "default"
Errors from xkbcomp are not fatal to the X server
klauncher(857) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(847)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(847)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: Can't find file "uk" for symbols include
> Exiting
> Abandoning symbols file "default"
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: Can't find file "uk" for symbols include
> Exiting
> Abandoning symbols file "default"
Errors from xkbcomp are not fatal to the X server
klauncher(1223) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(1215)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(1215)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: Can't find file "uk" for symbols include
> Exiting
> Abandoning symbols file "default"
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(269) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(263)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(263)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(706) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(700)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(700)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(2630) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(2624)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(2624)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(3118) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(3112)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(3112)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(4638) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(4632)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(4632)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(5014) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(5008)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(5008)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extensio

Cannot change size of picture (in Ko) when saving with Preview

Hello all,
I need your help please.
When I modify a picture with Preview, like resize it for example, then I want to save the picture, I cannot change the size in Ko like I used to be able to with Snow Leopard.
Before, in the "Save as" menu, there was an arrow to decrease or increase the "weight" in Ko of the picture. This arrow is still there, but it does not show the number of the actual weight of the picture anymore (is it 400 ko, or 500 ko, or 600 ko, etc...).
Anyone has the same problem ?

I tried the steps you mentioned and found that this issue is also present in Previous versions as in PSE 10 also.
I will suggest you to check "Convert Files to" check box and then select "JPEG Max Quality" from corresponding drop down in order to maintain the quality of your JPEG image.
You can do it specially in case you are processing JPEG files and your image quality will remain same.
Hope this will help you.

Apps failing to show up in KDE menu

I just installed BZFlag and Cube, and there's no "Games" entry in the KDE menu, even after I restarted KDE. What's screwing up? Is this the same thing that happens with Gnome menus under Xorg 7?

Yes I've noticed the same thing in Xfce, it seems that new xorg messes up the XDG_DATA_DIRS variable, it excludes /usr/share
so just add some thing like this to a executable script in /etc/profile.d
XDG_DATA_DIRS=$XDG_DATA_DIRS:/usr/share
export XDG_DATA_DIRS
#I'm not sure if this is needed as well
XDG_CONFIG_DIRS=$XDG_CONFIG_DIRS:/etc/xdg
export XDG_CONFIG_DIRS
Perhaps someone oughta file a bug report?

Cannot get a menu. Get a green blank screen

I cannot get a menu when I try to set up its. Just get a blank green screen that changes to black and green again.

Try holding menu and up arrow on remote for 6 secs to start cycling display resolutions.

Cannot change Detail level of IMAP, SMTP, or Junk logs

I am running 10.4.7 Server and 10.4.7 version of Server Admin. When I go to the Mail -> Settings -> Logging Tab I cannot change the detail level. Or at least I can use the drop down menu, but when I press Save it either blanks out the drop down menus or just resets them back to their original levels.
Is there a command I can use to change the Logs detail level via command line? Thanks in advance.

changing log levels has been discussed here many times. use the search feature. if you have questions after you search, please post.

Any pointer to look into, when buyers cannot change the payment terms

Any pointer to look into, when buyers cannot change the payment terms on the POs due to the error u201CExpected/Overall value should be equal or greater than invoiced amountu201D
A thought process to look around, to investage this issue is appreciated.
Thx/RICK

Rick,
this message may be due to the user trying to change a Purchase order item payment terms when there is already a blocked supplier invoice registered for the item. The vendor invoice payment terms normally override the PO payment terms. Users sometimes think they can speed up payment to a vendor by changing the payment terms on the PO. This can only be done before an invoice is registered and the PO term can be overridden at invoice entry time in any case.
Have a look at the terms on any associated invoice and the vendor record for the Purch org.
You may also want to have a look at your business process for blocked invoice resolution.
If the user wishes to speed up payment of an invoice they need to contact the users who are responsible for the vendor payments. We call them AP staff in our org - stands for Accounts Payable.
Hope this helps
Allen

Changing Object Directory Entry of Infocube - urgent

Hello -
I have an infocube that is already assigned to a package (not $TMP).
How can I reassign it to a different package.
When I try to reassign via Cube change, the package field is greyed out.
I have deleted all data, deactivated the cube + aggregates. There a re queries still attached to the cube though. But cannot change the Object Directory Entry.
Help solicited.
thanks.
-abhi

Abhi
In case of BW, there could be more than one package.
One for Backend development (like cube, ODS, update rules, info objects etc) and one or more for Reports.
So in ur case, the cube would always be alloted to the same package! You would only create new requests....
let me know if you have more questions.
prakash
Assigning points on SDN is way of saying thanks!!

Cannot change KDE menu entries

Similar Messages

Maybe you are looking for