Cannot change planning package in BPS0

Hello all,
I am trying to create a test scenario for the BPS model we are trying to implement. I am at the stage where I have created a Planning package and now I am trying to change it and put in values for fiscal year but when I say change package it doesnt do anything. Can you guys help me out. Does the cube need data in it when we do this?
Thanks in advance,

Thanks Aneesh,
Yes now I can see all my areas. I am almost to the stage where I can create layout but my excel settings are very high i guess I have to enable macros.
I am going to work on it more, I will ask some more questions
Do you have any document which explains the process more ? how to select the char in the planning level and how to we go step by step where does the planning folder come in picture and all..I have few documents, but sinc eits first time I need more like step by step process.How do we do web interface.
I will appreciate all your help.
[email protected]
Thanks

Similar Messages

CANNOT CHANGE PLANNING DATE

HI GURUS,
We posted a SD document 180000XXXX Base line date 16.12.2008 and Payt terms C003 (30 days) thE planning date must be 15.01.2009 but the Planning date is 12.01.2008. We intented change the base line date, the Payment terms and the Planning date doesn´t change. Can someone knows how can we fix the date line??

We have the OBB8 terms OK. but in this document in particular when we use FB03 the planning date is not correct, the Net Due Date is correct(15.01.2009), but for Treassury the Planning date is not correct
Payment Terms: C003 (30 days)
Bline Date: 16.12.2008
The planning date (claculated by SAP): 12.01.2008 (This day is not correct, SAP is not taken 16.12.2008 + 30 days)
I tried changing the bline date and the Payment Terms but it doesn´t work for this particular document? Anybody knows WHY?

Cannot change planning profile group from Marketing Plan

I try to change the Planning Profile Group of a marketing plan from 'Business Marketing' to blank and get the error message
Transfer of char. val. combination only allowed with a time specification
Does anyone know what it means?
Philip

Hi Philip,
Are you specifying Time details in the Planning sheet.
Please check the same as it is one of the primary dimensions.
Best Regards,
Pratik Patel

How to change the Package of planning area and datasource to be transportab

Hi every body,
I av created a datasource for the xxx planning area and saved in $tmp which is local package and cannot be transportable .and i would like to transport the planning area along with the data source.But before transporting the planning area along with the data sourse i av to change the package of the data source.I am not able to understand where should i change the package of the planning area and datasouce.
Can any body help me out of this problem.
Can be rewarded.
Shashi

Hi alaxander,
Thanx for your reply but before tranporting a datasource i av to transport the planning area bcoz it is the source.so how can i change the package of the planning area which is in $tmp (local object).
Regards,
Shashik

CQ doesn't pick up nodetypes.cnd changes using Package Manager

Hi,
CQ doesn't seem to pick up the changes in custom nodetype definitions in nodetypes.cnd when I install the package containing the updated nodetypes.cnd using Package Manager, how do I get around this?
Steps
1) fire up a fresh installation of CQ
2) In Package Manager, upload a CQ package containing custom nodetypes.cnd
3) check that the custom nodetypes are registered in Node Type Administration console
4) change nodetypes.cnd by adding a new property in a custom nodetype inside nodetypes.cnd file
5) make a new package with updated nodetypes.cnd file
6) In Package Manager, upload the new CQ package and install
7) check that the new property has been added in Node Type Administration console <-- ***FAIL***
Thanks!

You can only install new node types this way - but you cannot change existing node types with cnd files in a package. The package manager simply skips all existing namespace & node types in a cnd file.
This is because updating an existing node type might fail, depending on whether it is used in content and the change is conflicting. It's a schema change and that can be non-trivial. Therefore package manager does not try to tackle this at all.
You can use this tool that guides through the process: http://localhost:4502/libs/cq/compat/components/ntupgrade.html
You can do it yourself programmatically using the JCR API - take a look at the implementation of the above tool: /libs/cq/compat/components/ntupgrade/ntupgrade.jsp
But only do this during development - you should not plan for schema updates to production systems. In general, you want to minimize the use of schemas / node types with JCR. Use nt:unstructured, cq:Page, sling:Folder and co, and use properties (mostly sling:resourceType) to mark types. These can be much easier migrated.
HTH,
Alex

Cannot change payment method on subscription and C...

I am posting the transcript for the 45 minute chat I just suffered through. I simply needed to change my credit card as the old card had been replaced due to a security breach. Others on forums have complained about this issue but this is a stellar example of Skype's poor business and customer service practices. You are now chatting with 'Laarni M'. Laarni M: Hello! Welcome to Skype Live Support! My name is Laarni. Laarni M: If incase we got disconnected, simply click on the Chat Support Link and you will be reconnected to us in no time. Laarni M: https://support.skype.com/support_selection. Laarni M: With that being said, how may I help you? [Removed for privacy]: I need to update my credit card information because the credit card I have on file is expired. The update payment page does not give me the option to enter a new credit card. I started to delete my old card so I could add a new one, but I got an error message saying I must cancel my subscription before removing my credit card. Laarni M: Oh! [Removed for privacy]: I have a subscription already. [Removed for privacy]: I have had it for years. Laarni M: I am sorry to hear that you are having problems with updating your credit card. Laarni M: I will be glad to help you with this. Laarni M: To start with, can I have your Skype name and your name so that I can address you properly? [Removed for privacy]: I have already entered that information to begin this chat. It is required. Laarni M: I understand. [Removed for privacy]: the Skype name is [Removed for privacy] and my first name is [Removed for privacy] Laarni M: I just need to verify it. Laarni M: Thank you, [Removed for privacy]. Laarni M: Nice to meet you. Laarni M: Let me just pull up your account. Laarni M: Anyway how's your day so far? [Removed for privacy]: OK, I have found it. Apparently I am forced to buy Skype credit in order to change my payment to a new method? This is ridicuous. Laarni M: I am now pulling up your account, [Removed for privacy]. Laarni M: Thank you for waiting. Laarni M: Yes, that is correct. In order to change your payment method you need to either wait for your subscription to expire so you can purchase using the new card or you can buy Skype Credit. [Removed for privacy]: Now that I have bought 10.00 of skype credit and added the new payment information that way, it is appearing in my payment settings and I can delete the old card. But again, this is the only way to add a new payment method, which is very wrong. Laarni M: I am sorry if you feel this way, [Removed for privacy]. [Removed for privacy]: Oh, just lovely. I just tried to delete the old card and I have the same error message that "this card is being used to fund your Unlimited US and Canada 12 months. If you want to delete this card you have to cancel your subscription first." Is this some kind of nasty way of forcing me to lose my unlimited subscription? Laarni M: I see. Laarni M: Because the best way to add a new payment details is for you to let the subscription linked to the credit card expire first. Laarni M: After that, you can reactivate your subscrption using the new credit card. Laarni M: That is the best thing that I can recommend, [Removed for privacy]. [Removed for privacy]: I went into change payment settings and changed the payment method to the new card. The page saved and said it had changed the setting. But then I went back in and it had not. It still defaults to the old card. I still get the "cancel subscription" message when I tried to delete the old card again. Laarni M: Yes, [Removed for privacy]. [Removed for privacy]: I can't let it expire or it won't pay for my subscription in August. Anyway the card will not expire. It was replaced due to a security breach at the issuing bank. Laarni M: Because you really need to let your subscription expire first by cancelling it before you update your card. Laarni M: I see. [Removed for privacy]: Why would I want to do that when I probably won't be able to get the same plan? I have had that unlimited plan for years. [Removed for privacy]: I am certainly not cancelling that plan. Laarni M: I understand, [Removed for privacy]. [Removed for privacy]: This is really insane, you know. One should easily be able to update payment information when a card needs to be changed. [Removed for privacy]: I had this same problem last year, but there was a workaround. If you do not know what the current workaround is then please transfer me to a supervisor who does.l Laarni M: I understand, [Removed for privacy]. [Removed for privacy]: I doubt that you do understand. Since the forums indicate this is an ongoing problem, I am forced to assume this situation is intentional and is a way of forcing people to give up older and less expensive plans, and that you are fully aware of that. Laarni M: I am sorry but as much as I want to help you, we can't do anything but to let the subscription expire first by cancelling it before you update the credit card. [Removed for privacy]: I need to speak to a supervisor, please. Laarni M: I am sorry but as of the moment, my supervisor is engaged to a different activity. [Removed for privacy]: I am sorry but that is not the case. That is just what you have been told to say. I can continue to open new chats and waste representative's time for hours, or you can arrange for me to communicate with a supervisor. Laarni M: I am sorry for the inconvenience caused you. info: Your chat transcript will be sent to [Mod edit: Please do not include personal/private information when making a public post. Thanks!] at the end of your chat. Laarni M: I understand that it is really important for you ad upon further checking, we can try this step that may work for you. Laarni M: Do you have another browser aside from the one that you are using right now? [Removed for privacy]: Yes, I do Laarni M: Great! Laarni M: Internet Explorer would be the best. Laarni M: Can you please open it and go the link that I will provide to you? [Removed for privacy]: It is already open, please send the link Laarni M: Alright. [Removed for privacy]: I still do not have the link. Laarni M: Once you click on the link, and click Skype credit, please do not forget to click the change payment method when you buy Skype credit. [Removed for privacy]: I still do not have the link Laarni M: I am sorry for the delay, I am just having a system error as of the moment. Laarni M: But on your end, you can go to the page where you can buy Skype credit. Laarni M: By the way, there are 2 cards saved on your account. Laarni M: May I know the last 4 digit of the card that you want to use? [Removed for privacy]: 1591. And yes, I already explained to you that I bought Skype credit (which I do not need as I have a subscription!!) just to add the new credit card. Laarni M: I see. Laarni M: I can delete first the old credit card saved on our system. [Removed for privacy]: Please do that, but do NOT delete or cancel my subscription when you do this. Laarni M: Alright, [Removed for privacy]. Laarni M: Thank you for patiently waiting, [Removed for privacy]. [Removed for privacy]: I hope that what you are doing is successful. Laarni M: Please hang on, [Removed for privacy] as we are still doing some workaround for this. Laarni M: We are also getting an error doing this. [Removed for privacy]: That is not confidence-inspiring. Laarni M: I am sorry if you feel this way. [Removed for privacy]: I imagine that anyone would feel that way. Laarni M: Thank you for waiting, [Removed for privacy]. Laarni M: Here's what we can do to help you now, [Removed for privacy]. Laarni M: We really need to cancel your subscription so it will cancel the recurring payment. Laarni M: This does not mean that the subscrition will be cancelled. Laarni M: You can still use your subscription until the end of the billing period. Laarni M: So once we cancel your subscription now, you can try to go to the payment settings and update your credit details. Laarni M: Is everything okay? Haven't heard from you in a while. [Removed for privacy]: I am sure that you realize this is unacceptable. I am very surprised that you would suggest this as a solution. As I stated above, I am well aware that this is a method Skype is using to force people to give up better subscriptions. I will not be forced to accept a suboptimal subscription by this method. I am also aware that a supervisor can correct this problem in the system by hand. Please put me in communication with a supervisor. Also--I have ALREADY updated my credit details as I explained above. You or a supervisor simply need to change the subscription payment method to the new card that is already on file. Laarni M: I understand where you are coming from, [Removed for privacy]. Laarni M: But I am trying to help you with giving the best solution for this. [Removed for privacy]: We are going in circles. I have been on this chat for 45 minutes trying to get a simple payment method change that with any other company, I could do by myself online in two minutes. You are not offering me any kind of solution at all. You are insulting my intelligence by claiming that the payment method cannot be replaced. Laarni M: I am sorry if you feel this way, [Removed for privacy]. [Removed for privacy]: Please stop this. The system is clearly set up to block a payment change. A supervisor can override this and that is what I expect you to arrange. Laarni M: But as of the moment, there is no available supervisor. [Removed for privacy]: Please do not tell me things that are not true. [Removed for privacy]: Please connect me with a supervisor. Laarni M: And If I will transfer you to my supervisor, he will give the same information that I provided to you. Laarni M: This is because it is the only workaround for this, [Removed for privacy]. Laarni M: You do not need to worry, cancelling your subscription is just cancelling the recurring payment or auto renewal. [Removed for privacy]: He may, but if he does, he will also be stating something that is not true. It is always possible for a supervisor or manager to make changes in the system. Laarni M: You can still use your subscription until the end of the billing period. [Removed for privacy]: I'm sorry, but in August when the billing period ends, I will receive notification that my subscription has cancelled due to non-payment and that I must choose a new plan. That is what I do not want. Therefore your solution is unacceptable. I have stated this clearly. Laarni M: I am sorry [Removed for privacy], I really want to help you but this is only the work around or soultion that we can do. [Removed for privacy]: Then apparently after 8 years, I will be searching for new phone service. I am very sorry that this is the case. Laarni M: If the auto renewal will cancel, you can still reactivate your subscrition and that time, the new payment method will be use for that subscription. [Removed for privacy]: Do I have your word that I will be allowed to keep the same plan with no changes to my subscription? Laarni M: Yes, [Removed for privacy]. You can still reactivate the same subscription. Laarni M: You do not need to wory about this. [Removed for privacy]: If that is not the case I will be cancelling. And Skype needs to change its payment method practices. This is very poor customer service. I will be going on every forum I can find and posting a poor review of the service. This is a shame since I have been a loyal Skype customer for more than 8 years. I was a customer when Skype was the only internet phone company in business. info: Your chat transcript will be sent to [Mod edit: Please do not include personal/private information when making a public post. Thanks!] at the end of your chat. Laarni M: I am sorry if you feel this way, [Removed for privacy]. Laarni M: Thnak you for being loyal with Skype.

Well, it happened again. This time I'm done with Skype. A ten-year customer, and they've finally worn me down and worn me out. Yes, after 30 minutes of constant escalation, requesting a supervisor, and finally threatening to walk, they offered another annual contract at 6 cents more a year. But at the cost of making me sign up all over again, and after wasting my time both last year and this year. And I am DONE. I will use my remaining Skype credit for the few online teaching video conferences I have to do, but no more subscriptions. Bye, Skype. I would provide adjectives for how horrible your customer service is, but they would all be profane.
Transcription of today's chat:
Close chat
info: at 18:59:56
Please wait for an agent to respond. You are currently '1' in the queue.
info: at 19:01:56
All agents are currently assisting others. Thank you for your patience. An agent will be with you shortly. You are currently '1' in the queue.
info: at 19:01:58
Privacy Statement
You are now chatting with 'Gian C'.
Gian C: at 19:02:11
Hello! Welcome to Skype Live Support! My name is Gian. If incase we got disconnected, simply click on the Chat Support Link and you will be reconnected to us in no time.https://support.skype.com/support_selection .
Gian C: at 19:02:11
With that being said, how may I help you?
Customer: at 19:02:24
I chatted with an agent 2 days ago re: failure to apply my credit card to my subscription. He said it was taken care of and my online account should show the subscription renewed in 24 hours. it is still not renewed.
Gian C: at 19:02:41
I am sorry to know that
Gian C: at 19:02:47
What is your Skype name?
Customer: at 19:03:49
customer
Gian C: at 19:04:04
Thanks
Gian C: at 19:04:08
Let me check the account
Gian C: at 19:05:50
Thank you for patiently waiting
Gian C: at 19:06:07
Is this for the Unlimited Us and Canada?
Customer: at 19:06:13
yes
Gian C: at 19:07:12
I see
Gian C: at 19:07:23
Can you go to this site right now?
Customer: at 19:07:30
i'm there
Gian C: at 19:07:33
http://www.skype.com/en/
Gian C: at 19:07:39
https://www.skype.com/en/rates/?nu=subs-calling
Gian C: at 19:07:49
Look for Unlimites Us and Canada
Customer: at 19:07:58
why?
Gian C: at 19:08:21
Just want to make sure if repurchasing the subscription would be avaialble
Customer: at 19:08:36
I was told last year that it would be available. And two nights ago.
Gian C: at 19:08:36
That is the best work around to get the subscription back using the new card details
Gian C: at 19:08:45
I understand
Gian C: at 19:08:53
Can you please go and check it first
Customer: at 19:08:59
No, thank you. Please just apply my card. This is what happened last year.
Gian C: at 19:09:02
So I can assure the resolutiong
Customer: at 19:09:34
The subscription shows that it expires today. It is on my account. Simply renew it with the card information that is also on my account.
Gian C: at 19:09:40
Can you help me on this to solve your issue please?
Gian C: at 19:09:53
I understand
Customer: at 19:10:02
You have directed me to your sales site to search for the plan I already have all over again. I have no time for this.
Gian C: at 19:10:06
However the time you change the card did not worked on the system
Gian C: at 19:10:15
That is why the renewal did not push trough
Customer: at 19:10:41
It didn't work last year either because the system is a mess. But a rep fixed it last year. If you cannot do this please pass me to a supervisor.
Gian C: at 19:10:59
ok.
Gian C: at 19:11:19
Before we do that, can you please try to check if the subscription is available first.
Customer: at 19:11:40
I do not understand how you expect ME to check if a subscription is available!
Customer: at 19:12:04
The subscription is ON MY ACCOUNT AND SAYS IT NEEDS TO BE RENEWED.
Gian C: at 19:12:09
Basically it is simple
Gian C: at 19:12:10
Go to this website
Gian C: at 19:12:10
https://www.skype.com/en/rates/?nu=subs-calling
Gian C: at 19:12:10
Click on U.S.
Customer: at 19:12:16
Please pass me to a supervisor.
Gian C: at 19:12:20
Then check if US and Canada is part of the list
Gian C: at 19:12:39
Before I pass you to our supervisor
Gian C: at 19:12:47
Let me give you a heads up on your case
Customer: at 19:12:57
it is there for $2.99 per month. I have a locked in annual charge for that subscription for $29.99. Not $36.00.
Gian C: at 19:13:11
I see
Gian C: at 19:13:28
Thanks for the information
Gian C: at 19:13:38
When did you change your card detail? For this subscription?
Customer: at 19:15:08
Last year. At which time the system refused to remove the earlier invalid card and charge the 2nd (correct) one. This year the system allowed me to remove the old card. The rep 2 days ago told me the card was fine. When I looked at the detail this evening, the expiration date was missing, so I filled it in. The rep said NOTHING about this two days ago. Frankly I think Skype is trying to sabotage my re-order to try to force me off of my annual plan and onto a monthly. I will not do it.
Gian C: at 19:15:13
Thanks
Gian C: at 19:15:48
Just to make sure we will be solving this issue, can you please provide me your call back number
Customer: at 19:15:59
You do not need to call me.
Gian C: at 19:16:07
Just incase this chat got disconnected so our supervisor can call you
Customer: at 19:16:19
(###) ###-#### (REDACTED FOR PRIVACY)
Gian C: at 19:16:25
Let me get you our supervisor as you have requested
Gian C: at 19:16:29
Thank you
Customer: at 19:25:17
?hello
Gian C: at 19:27:42
I will get back to you once the Supervisor is ready to take this chat. For a moment
Gian C: at 19:27:50
Sorry to keep you waiting
Gian C: at 19:28:08
Our Supervisor is still engaged with the call
Gian C: at 19:28:10
Anyway
Gian C: at 19:28:20
Here is what we have found out on the subscription
Gian C: at 19:28:41
The renewal has passed already, so we can't renew it manually other than repurchasing the subscription
Gian C: at 19:28:54
Checking the price of the subscription
Customer: at 19:28:59
It has not passed yet. it expires 5/7. Today is 5/6.
Gian C: at 19:29:12
Let me give you a heads up
Gian C: at 19:29:39
Auto-renewal only happens once. And that is 3 days before the subscription expire
Customer: at 19:30:09
I give up. This is done. No subscription. Of any type. And I have been a Skype customer for over 10 years. Goodbye.
Gian C: at 19:30:23
I am sorry if you feel that way
Gian C: at 19:30:34
I am explaining to you all the things you need to know
Gian C: at 19:31:27
But you refused to listen nor cooperate. As much as I wanted you to get your subscription back. However it is within your call if you want to follow my advised to get this resolved quickly
Gian C: at 19:31:47
The new subscription prices is just 30.50USD for 1 year
Gian C: at 19:32:12
It is just few cents higer compare to the old price $29.99
Gian C: at 19:32:37
I hope that won't be a problem for you to get the 12 months subscription for the Unlimited US and Canada.
Customer: at 19:32:51
This is flatly ridiculous. The rep 2 days ago told me this was taken care of. Now you tell me it is not, keep me on chat for 30 minutes, make me look up subscription prices on your OWN website, and then tell me my subscription has expired when it has not. Yet I am the one being called uncooperative.
Gian C: at 19:33:02
If the auto renewal failed because of card used
Customer: at 19:33:05
That is a problem. I will not resubscribe. I don't care that it is only 6 cents a year more.
Gian C: at 19:33:21
Then Repurchasing the same subscription will be best to get it back
Customer: at 19:33:30
That is not why. If Skype did not have the information required I should have received an early email. I got SEVEN EMAILS IN ONE DAY INSTEAD.
Customer: at 19:33:42
The 7th one said the subscription was cancelled.
Gian C: at 19:34:05
That is the notification sent by Skype to tell you that we are still trying to accept the payment
Customer: at 19:34:30
It makes no sense to notify a customer every two hours on a SINGLE day, but not before.
Gian C: at 19:34:33
6 times the sytem try to renew the subscription
Customer: at 19:34:43
Yes. ON the same day. None on any other day.
Gian C: at 19:35:01
If only there is no problem with your card then the subscription should renew without a problem
Customer: at 19:35:10
You expect people who are at work to sign in from their work PC for personal business and renew within 8 hours. Ridiculous.
Gian C: at 19:35:08
Yes correct
Customer: at 19:35:12
I am done.
Gian C: at 19:35:10
As I said
Gian C: at 19:35:30
3 days before the subscription expire is the only day to renew the subscription automatically
Gian C: at 19:35:32
That is how the system works
Customer: at 19:35:34
As I said, the rep 2 days ago told me the card was fine but would take 24 hours for teh change to apply to the syste.
Gian C: at 19:35:37
It is part of the terms of use
Customer: at 19:35:43
Read what I said.
Gian C: at 19:36:01
Yes I already documented this case and I already escalated those previous representative
Gian C: at 19:36:08
For providing you false information
Customer: at 19:36:12
The terms of use don't say you bombard people with emails every 2 hours on a single day.
Customer: at 19:36:44
And then cut them off at the end of the day. When their subscription has not even expired yet. And then tell them it's their own fault their card didn't work. When they were told it was fine.
Gian C: at 19:36:50
The email notification is our way to make sure customer will be notified that they need to renew the subscription to avoid this kind of issue
Customer: at 19:37:07
Then why not send it once a day for six days instead?
Customer: at 19:37:13
that would make a lot more sense!
Gian C: at 19:37:38
Here is the thing Kim the system works that way for 10 years already
Gian C: at 19:38:12
And only few customers are having this kind of issue, common issue was cause by problem with the card associated to the subscription.
Customer: at 19:38:18
See this? this was last year:
Customer: at 19:38:20
http://community.skype.com/t5/Rates-and-subscriptions/Cannot-change-payment-method-on-subscription-a...
Gian C: at 19:38:26
Ok
Customer: at 19:38:45
You'll get an update on that thread, believe me. Which will make it clear why I'm done with Skype.
info: at 19:38:52

Cannot change Valuation Class although no Open-PO

Dear Gurus,
I try to change Valuation Class in Material Master but I cannot after I created PO and still after MIGO and MIRO.
We are using PS and Material Master is set as below;
Ind./Coll in MPR4 = 1
Since requirement comes from PS, PO is created with account assignment category Q.
Once we execute MIGO and MIRO for the PO, still we cannot change Valuation Class.
If you know the way to change Valuation Class, would you tell me how?
Best Regards,
AK

Hi,
The change of the valuation class will impact on ML (material ledger), if the ML
is active. Is ML active on your system?
The note 575632 explains partly the effects on CCS. The
valuation class is used to allocate the plan costs to the related cost
element. Therefore, it is advisable to create new materials instead of
changing the valuation class. This would be straight forward and easy to
follow-up. The CCS does not a change history. Consequently, the previous
periods can not be explained with current CCS. That may lead
inconsistencies under circumtances. It is up to your decision. You can
change, test the impact and decide on. The proposed solution of SAP
would be avoiding that change and creating new materials.
When you try to change the valuation class, what is the details of the
error?
In order to change valuation class in the material master, you have to
make sure that none of the following exist in you system:
1 Valuated stocks in the current period or in the previous period
2 Open purchase orders or delivery schedule lines
3 Production orders for which a goods movement has already taken place
The system checks the stocks (storage loc. stocks and special
stocks) of the same period in which the valuation class will be changed.
If the valuation class of current period will changed, check in
transaction code MMBE for zero stocks, or in SE16: MARD/MBEW;
MCHB/MKOL/MSKA/MSKU/MSLB/MSPR.
The system checks all dependant purchase documents without delete flag
and error M3368 occurs when it finds at least one non deleted po item
(not only when stocks exist).
1. First be sure that no stocks exist in current AND previous period!
   see note 30656, with an example how to get zero stocks.
2. SE16 ->table EKPO. Select all po items of the related material.
   If you found items with LOEKZ <> 'L', you have to delete them in ME22
3. SE16 ->table AFPO. Select all items of the related material/plant.
   If you find at least one item, change of val.clss. is not possible.
   You have to these production order(s) !
These hard restrictions are necessary as inconsistencies in account
assignment will follow after change of val.class, when proceeding
follow up functions of a PO item before and after changing valuation
class. Also attached is 146241.
In customizing for the Material Master, you can switch the check for
open purchase orders and/or for production orders to a warning.
You do this in Define Attributes of System Messages by assigning
the message type Warning to message MM 326 and/or MM 327 respectively.
Please refer to note 160970 for more information.
I hope this will help you in resolving the reported issue.
Best Regards,
Arminda Jack

SG:50, Cannot convert planned orders to prod orders at BOM component level

Test scenario for Strategy Group 50 (Planning without final Assembly)
Product Structure
Material--> SG50.00 > FERT> (Strategy Group: 50)
Material---> SG50.02 --> HALB --->(Strategy Group: 40)
Material---> SG50.04 ---> ROH --->(Strategy Group: Blank)
Maintained PIRs and Ran MRP at the header level, Planned orders are created
with order type VP at levels of BOM structure. Thus cannot covert planned orders
to production orders without having sales order.
But my understanding of Strategy Group 50, is BOM components can be produced before hand (i.e.
before sales orders are recieved ). Now planned orders with order type VP not able to convert
planned orders to prod orders at BOM component level

Stuti/Prasobh:
Thanks for your inputs, it answers my question
Intially maintained Individual/Collective indicator to "2" at header level (FERT), which is why all the planned orders are created with order type VP
Changed the Individual/Collective indicator to "blank " at header level (FERT), and maintained Individual/Collective indicator to "2" at component level
Reran the MRP (MDO2), with the following settings --> Delete and Recreate planning data and Check mark on Also plan on unchanged components
Able to see planned orders at component level with order type LA
Due points have been assigned

Cannot change Colour within a picture

I have tried to change the colour of the sky in a picture, the origianl sky is a washed out white due to poor weather conditions.
I have used the colour picker in the adjustmentstab and when i try to sample the origianl sky is comes up with a Hue of 0 and the main colour is RED ???
and also i cannot change this colour, what am i doing wrong?
Thanks
John

Hi John.
I will happily be corrected, but the information you're getting from Ir. Bob is misleading.
Aperture is an image development program. One of it's core design principles is that it doesn't add data to an image -- it takes the existing data and adjusts it. This is why there is no "editing" in Aperture. In Aperture, one makes "adjustments".
Those adjustments (almost) all follow this pattern:
original pixel values * adjustment parameter = adjusted pixel value
The original pixel value for your sky is, apparently, red. This happened when you took the photograph. You have, in photography parlance, "blown the highlights" This isn't the forum to explain that, but you will most certainly want to research what that means and how to avoid it in the future.
Blown highlights can sometimes be recovered from the RAW data using the "Recovery" slider in the Exposure Brick.
From what you say, I don't think this will work for your image.
Since your highlights are blown, you will want to add blue to the image. That kind of operation is not done with Aperture. You will need to use a Graphics Editing package (such as Photoshop or any of the free or inexpensive programs like it). Graphics Editors combine graphics elements. They allow you to add data to images.
My reply covers a lot of basic concepts. I strongly suggest some books or a course on photography as you move forward with Aperture.
Good Luck.

Change Management Package

Hello All,
I am looking at the Oracle Change Management package and I see the overall process of baselines, comparisons, and synchronizations.
I thought in a previous version I was able to put in my own DDL (like an ALTER TABLE) and make that part of a plan that I could then use the Change Management Package to deploy to various databases & schemas.
Am I mistaken? If not, has the functionality been deprecated or has it been replaced/updated with something else?
I still have a need to do that sort of thing and having the Change Management package help me manage that would be "optimal".
Thanks,
Craig
11g
Edited by: user6448213 on Apr 12, 2012 12:59 PM

Hi Craig:
Change manager added a capability similar to the one you describe in 12c Cloud Control. You can create a change plan and populate the change plan with specific changes and synchronize them to a destination database. To do this you need to create a change plan in EM and you can populate it with changes from SQL Developer, from another EM Change Manager Comparison, or by capturing a change to a single object. Below is a link to the documentation
http://docs.oracle.com/cd/E24628_01/em.121/e27046/change_management.htm#EMLCM11813
regards,
-Ravi

Interchangeability and planning package

Hi - why does any change in the interchangeability group does a check on the planning package - with this: it throws an error sometimes that 'package doesn't exist' and the only way is to delete and recreate the group (if the workaround of blocking, changing and unblocking doesn't work - as the error sometimes comes while blocking itself). Also, my understanding is that this package gets updated when you involve a particular product/location in some interchnageability group, so: how does it get removed later consequently giving this error?

Please find my blog on this topic for solution:
Interchangeability groups (ICGs) and Planning packages

J2EE status info unavailable - Cannot change to working directory

Hello everyone,
I've got this error when I start SAP Solution Manager system.
disp+work.exe Running,Message Server connection ok,J2EE status info unavailable.
I've checked trace files and logs,
Finally dev_bootstrap says: "Cannot change to working directory"
I couldn't find what changes import_properties file which under the E:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster folder.
Does anyone have any ideas about this issue?
trc file: dev_bootstrap
Used property files
-> files [00] : E:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster\instance.properties
Instance properties
-> ms host    : hostname
-> ms port    : 3901
-> os libs    : D:\usr\sap\<SID>\DVEBMGS00\j2ee\os_libs
-> admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Bootstrap nodes
-> [00] bootstrap            : E:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID8075800 : E:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID8075850 : E:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID8075800            : E:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] ID8075850            : E:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster\instance.properties
[Thr 4632] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 4632] JLaunchRequestQueueInit: create pipe listener thread
[Thr 4984] JLaunchRequestFunc: Thread 4984 started as listener thread for np messages.
[Thr 1048] WaitSyncSemThread: Thread 1048 started as semaphore monitor thread.
[Thr 4632] NiInit3: NI already initialized; param 'maxHandles' ignored (1;10002)
[Thr 4632] CPIC (version=700.2005.12.02)
[Thr 4632] [Node: bootstrap] java home is set by profile parameter
     Java Home: C:\j2sdk1.4.2_16
[Thr 4632] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\<SID>\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap]
-> node name          : bootstrap
-> node type          : bootstrap
-> node execute       : yes
-> java path          : C:\j2sdk1.4.2_16
-> java parameters    : -Djco.jarm=1
-> java vm version    : 1.4.2_16-b05
-> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type       : server
-> java vm cpu        : x86
-> heap size          : 256M
-> root path          : D:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster
-> class path         : .\bootstrap\launcher.jar
-> OS libs path       : D:\usr\sap\<SID>\DVEBMGS00\j2ee\os_libs
-> main class         : com.sap.engine.offline.OfflineToolStart
-> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path     : E:\usr\sap\<SID>\DVEBMGS00\exe\jstartup.jar;E:\usr\sap\<SID>\DVEBMGS00\exe\jvmx.jar
-> parameters         : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0080758
-> debuggable         : yes
-> debug mode         : no
-> debug port         : 60000
-> shutdown timeout   : 120000
[Thr 5240] JLaunchIStartFunc: Thread 5240 started as Java VM thread.
[Thr 5240] *** ERROR => Can't change working directory [D:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster] (rc = 2) [jlnchxxi.c   378]
[Thr 5240] *** ERROR => Cannot change to working directory [D:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster] (rc=-1) [jlnchxxi.c   724]
[Thr 4632] Wed Jan 21 05:22:15 2009
[Thr 4632] JLaunchCloseProgram: good bye (exitcode = -1)
Regards,
Baris

Hello everyone,
I've got this error when I start SAP Solution Manager system.
disp+work.exe Running,Message Server connection ok,J2EE status info unavailable.
I've checked trace files and logs,
Finally dev_bootstrap says: "Cannot change to working directory"
I couldn't find what changes import_properties file which under the E:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster folder.
Does anyone have any ideas about this issue?
trc file: dev_bootstrap
Used property files
-> files [00] : E:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster\instance.properties
Instance properties
-> ms host    : hostname
-> ms port    : 3901
-> os libs    : D:\usr\sap\<SID>\DVEBMGS00\j2ee\os_libs
-> admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Bootstrap nodes
-> [00] bootstrap            : E:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID8075800 : E:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID8075850 : E:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID8075800            : E:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] ID8075850            : E:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster\instance.properties
[Thr 4632] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 4632] JLaunchRequestQueueInit: create pipe listener thread
[Thr 4984] JLaunchRequestFunc: Thread 4984 started as listener thread for np messages.
[Thr 1048] WaitSyncSemThread: Thread 1048 started as semaphore monitor thread.
[Thr 4632] NiInit3: NI already initialized; param 'maxHandles' ignored (1;10002)
[Thr 4632] CPIC (version=700.2005.12.02)
[Thr 4632] [Node: bootstrap] java home is set by profile parameter
     Java Home: C:\j2sdk1.4.2_16
[Thr 4632] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\<SID>\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap]
-> node name          : bootstrap
-> node type          : bootstrap
-> node execute       : yes
-> java path          : C:\j2sdk1.4.2_16
-> java parameters    : -Djco.jarm=1
-> java vm version    : 1.4.2_16-b05
-> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type       : server
-> java vm cpu        : x86
-> heap size          : 256M
-> root path          : D:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster
-> class path         : .\bootstrap\launcher.jar
-> OS libs path       : D:\usr\sap\<SID>\DVEBMGS00\j2ee\os_libs
-> main class         : com.sap.engine.offline.OfflineToolStart
-> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path     : E:\usr\sap\<SID>\DVEBMGS00\exe\jstartup.jar;E:\usr\sap\<SID>\DVEBMGS00\exe\jvmx.jar
-> parameters         : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0080758
-> debuggable         : yes
-> debug mode         : no
-> debug port         : 60000
-> shutdown timeout   : 120000
[Thr 5240] JLaunchIStartFunc: Thread 5240 started as Java VM thread.
[Thr 5240] *** ERROR => Can't change working directory [D:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster] (rc = 2) [jlnchxxi.c   378]
[Thr 5240] *** ERROR => Cannot change to working directory [D:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster] (rc=-1) [jlnchxxi.c   724]
[Thr 4632] Wed Jan 21 05:22:15 2009
[Thr 4632] JLaunchCloseProgram: good bye (exitcode = -1)
Regards,
Baris

FRM-40208: Form running in query-only mode. Cannot change database fields.

Hi,
I am using forms 6i where it is calling a form from a menu in query like call_form(,query_only). Now an error is occurring on call of that form ‘FRM-40208: Form running in query-only mode. Cannot change database fields.’ Though this is been handled to give a certain message from on_error message from a package from library.
Now the issue is that the error keeps on popping even after the ok button is pressed. There are number of records from the table. How can we handle the error. Any suggestion would be really appreciated!!!
Regards,
Rajesh

thanks Gred but i have resolved the issue. it seems that each row was going into query_only mode (program written such a way). therefore the error was showing even after the OK button. handled the issue from ON_ERROR trigger. anyway thanks for your time Gred!

Big Permissions Problem: "You Cannot Change The Contents Of This Folder"

I installed Tiger some time ago (and need to upgrade now from 10.4.6 to 10.4.9).
I haven't used it much since some of my software will only run under Panther.
In any case, I'm using it now and have been having big permissions/user accounts problems.
I have two users on the computer "robert" and "ra", both with admin privileges (I set up two because I was trying to get around these problems -- I'd be very happy with just one).
I have 10.4.6 installed on an external HD and boot from that into Tiger (I have Tiger on another external HD as a backup, and my main HD in the iMac has 10.3.9 -- that's what I boot from when I need to run older programs).
In any case, both "robert" and "ra" have ADMIN privileges. But I get weird ownership problems. For instance, if I am logged in as "ra" and try to play a Realplayer file streaming from the web (in Firefox 1.x), I get the error
/Users/robert/Desktop/307e6wz7 could not be saved, because you cannot change the contents of that folder.
I check the ownership of the "Desktop" folder -- read/write for "ra".
If I right-click I can save the Realplayer file to the desktop.
Same with other links.
I've also noticed other ownership problems (blocked folders at finder level) but can't duplicate tonight. Is this an obscure error, or is there something amiss in ownership recognition? Is there some way I can sort all out? Login in as "root" and set all right?
Thanks
G4 iMac Mac OS X (10.4.6)

Yes they do. When you installed them you dragged these particular apps to the Applications folder. Doing so automatically attributes the program with the ownership attributes of the account owner who installed them - 'robert.'
Proper application installers install apps under the system/admin ownership. You can try to fix these apps by changing their permissions:
Select the app and CTRL-click to open the contextual menu. Choose Show Package Contents from the contextual menu. Select the Contents folder and press COMMAND-I to open the Get Info window. In the Ownership and Permissions section click on the tiny arrow icon to expose the panel. Click on the little lock icon to authenticate. Change permissions as follows:
Owner = system with Read/Write privileges
Group = admin with Read/Write privileges
Other with Read-Only privileges
Click on the Apply To Enclosed Items button. Close the lock by clicking again on the lock icon.

NOT WORKING -How To Display All Comments for a Planning Package

Hi All,
I am using How to Document "How To Display All Comments for a Planning Package" to display comments for list of "cost center" against different "fiscal/year" for Key Figure "Budget Amount".
Below is how the Layout looks like where comments are posted against Cost Center- year combination.
Cost Center                          2007     2008     2009     2010     2011
3          2.00     2.00     2.00     2.00     2.00
4          2.00     2.00     2.00     2.00     2.00
6          2.00     2.00     2.00     2.00     2.00
7          2.00     2.00     2.00     2.00     2.00
This case is very similar to the example given in how to document but after following all the steps correctly in the document and also followings various forum links such as below , I am not able to display the comments for list of Cost Centers.
"How to...BSP display comments"...problem with row comment
Below are the issues being faced:
1) When i save the comments , the icon for comments (indicating that some comments have been entered) is not shown against selection of Cost Center-Year although the comment is saved.Comment are also visible in BPS0.
2) On execution "Web interface could not be loaded" - is the message that is shown in the area where BPS application should show all the comments.
Highly Appreciate any help with issues mentioned above.
Kind Regards,
Robin Johri

Hello Robin,
1) please check if you set the row/cell selection property correctly for the layout component in the web interface.
2) the error does not make sense since the comments are displayed in an iframe using a BSP application, not a web interface. Check the URL in the HTML text component.
Regards,
Marc
SAP Techology RIG

Cannot change planning package in BPS0

Similar Messages

Maybe you are looking for