Cannot check real time access while creating infopackge

Hi all,
I am getting an error while trying to create a real time infopackage. I have made my datasource real time by changing the real time flag in ROOSOURCE but while creating the infopackage the real time check is greyed out.
I had read in some other message in SDN that you can make non-real time DS into real time by changing the flag in ROOSOURCE any ideas.
Also we are in content 7.0.3 and I dont see any business content either in ECC or BI in ROOSOURCE table with real-time flag marked X. Does SAP delivery any content which are real time or am I missing something here?
thanks for your input

Hi Raj,
You can create the Real-Time infopackage only after creating the info-package for Init Load. The check box for Real-Time is not enabled if Initialization load is not run. Though this check has to be made only after creating the Real-Time Datasource correctly.
Go to RSO2, enter the datasource name, and open it in edit mode. Then choose the option 'generic delta'. Give the field on which you want the Delta pointer to be set (The field you want to enter here should NOT be hidden from SAP BW). Importantly, check the option 'Real-Time Enabl'. save the datasource. It becomes Realtime. Replicate the datasource.
Hope this helps.
Thanks,
Praneeth.

Similar Messages

Run time error while Creating IDN and Inbound Delivery

Hi All,
I am getting Run time error while creating Inbound Delivery Notification from Inbound Queue and Inbound Delivery from IDN
After debugging i come to know that system is looking for Patch Level SAPKNA7026 but in my system Patch is upto SAPKNA7022
Is there any OSS notes available to deactivate/resolve this run time error ? I tried 0001798794 Deactivation of hierarchical access functionality but system is still giving me run time error
Regards,
P@M

Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath

About DTP with real-time access.

Hello Gurus,
       setting for error handling only has an impact while repairing a DTP request (repair) and during the conversion of the DTP to standard DTP (for example, to correct an error during extraction).
      will you please give a simpel scenario to explain above words?
thank you very much.
Fran

Hi,
Use :
With SAP NetWeaver 7.0, SPS 14, the following changes and enhancements are available for real-time data acquisition:
●      Changes to the menu and the context menu of the monitor for real-time data acquisition
The menu and the context menus for the individual objects in the monitor for real-time data acquisition have been standardized and enhanced. In particular, it is now possible to assign daemons and data transfer processes on various levels using context menu entries. For a complete overview of the functions in the menu and in the context menus, see Monitor for Real-Time Data Acquisition.
●      Assignment of daemons for InfoPackages and data transfer processes (DTP)
To assign InfoPackages and data transfer processes to a daemon, you can call the monitor for real-time data acquisition in the following ways:
○       In the Data Warehousing Workbench using the respective context menu entry Assign RDA Daemon.
○       In InfoPackage maintenance using the Schedule tab page, and in data transfer process maintenance using the Execute tab page.
The button names for jumping to the monitor for real-time data acquisition have changed here. To jump to the monitor, choose Assign Daemon.
●      Repair process chains for repairing a broken data transfer or a missing delta in the DataStore object
In certain situations, a gap in the delta of the DataStore object can occur if there is a closed request in the PSA but there is no corresponding request in the DataStore object. For example, this is the case if a DTP request has terminated due to an error in the transformation. Here, you can create a repair process chain to repair a missing or broken update from the PSA. The repair process chain contains a standard DTP as well as any further processes required for subsequent processing (such as activating the data in the DataStore object or subsequent process chains). When the repair process chain is executed, the complete delta is loaded from the source into the DataStore object and processes for activation and further processing are executed if required.
●      Process types for starting and stopping real-time data acquisition
You can use process chains to control real-time data acquisition using process types Start Real-Time Data Acquisition (RDA) Load Process and Stop Real-Time Data Acquisition (RDA) Load Process.
More Info :
http://help.sap.com/saphelp_nw70/helpdata/en/47/2731751c2a2dede10000000a1553f7/frameset.htm
Regards
Ram.

Check for mandatory fields while creating EP users using code .. :|

Hello All,
I have a code using which I can create user accounts/EP users on Portal, am working on EP6 SP9 & SP12.
My query:
1. From Portal's perspective -> While creating EP users, there are few mandatory fields like user-id, FirstName, LastName, Email-id and Password. If any of the above fields is null/empty, Portal would give us an error message.
2. From coding perspective -> Here, only the user-id is required. Even if I do not enter/fill any of the above mentioned mandatory fields (except user-id), user account is created.
In case wherein FirstName/LastName is not mentioned, Portal shows the userid in the Welcome Frame, i.e. Welcome <user-id>. Tried this by commenting the statements contains the methods related to setting/accepting FirstNme and LastName of user.
I want to know if this is all rite?
If no, then please guide me as to how can I set mandatory fields in my code.
Awaiting Reply.
Thanks and Warm Regards,
Ritu R Hunjan

Hi Ritu,
>>please guide me as to how can I set mandatory fields in my code??
In ur jsp file or in the controls code add the following attribute
<hbj:label id="userIdLabel"
 text="User ID"
 labelFor="userIdInput"
 design="HEADER3"
 required="true"/>
and to check the mandatory entry for that field do this in the submit button
<hbj:button id="insert"
 text="Submit"
 design="emphasized"
 onClick="save"
 onClientClick="if(!isMandatory()) htmlbevent.cancelSubmit=true;;"/>
and in the javascript write the client validation code.
Hope this helps.
Regards,
Joshua Kiran

What settings we need to check in PS module while creating the new plant.

Dear Friends,
If we extending the new plant what all the things that we need to check in Project systems module, what all the configuration that needs to performed. Here we are using the Standard Project structure to creating the projects.
But it is not a manufacturing plant. All the service processes are takes place from this plant.
While creating the plant if we are copying from the existing plant, is that the all assignments are copying to the new plant?
Regards,
Hari
Edited by: Hari Krishna on Jan 5, 2009 10:17 AM

Dear Hari,
Mainly two settings have to be extended for using networks for that plant..
1) Extending Network type Parameters - T-code - OPUV
2) Production Order control Parameters - T-code - OPU6
Rdgs,
Deepa

What settings we need to check in SD module while creating the new plant.

Dear Friends,
If we extending(creating) the new plant what all the things that we need to check in sales and distribution module, what all the configuration that needs to be performed.
But it is not a manufacturing plant. All the service processes are takes place from this plant.
While creating the plant if we are copying from the existing plant, is that the all assignments are copying to the new plant or not?
Regards,
Hari

Hi,
Check the below check list
SD Activities     path
creation of plant      IMG>ES>def>log gen>define copy delete check plant
define locations in plant     IMG>ES>def>log gen>define location
Assign Business Area to Plant/Valuation Area and Division     IMG>ES>***>log gen>Assign Business Area to Plant/Valuation Area and Division
Assign sales organization - distribution channel - plant     IMG>ES>***>sd>Assign sales organization - distribution channel - plant
Assign Business Area To Plant And Division     IMG>ES>***>sd>buss area acct asst-->*** buss area to palnt and divison
Assign shipping point to plant
Shipping Points determination      plant required for shipping point determination
Checking Rule For Updating Backorders     AC
Define Checking Groups Default Value     combination of material type plant and Ac
Assign Organizational Units By Plant     in STO 's
Material and plantwise chapter id combination     tcode J1ID for excise maintainence
Materail assessable value
In CENVAT determination
Excise indicator for palnt
Exceptional material excise rates
Quantity based AED, SED, NCCD
Maintain Excise Registrations     IMG>log gen>tax on goods moments>INDIA->Basic settings
Maintain Plant Settings
Maintain Excise Groups
Maintain Default Excise Groups and Series Groups
Specify Printers for ARE documents
Regards,
kishore.

"cannot find this class" erro while creating Background Callable Object.

Hi All,
I am facing "cannot find this class" while creating Background Callable Object.
I followed the following document for Creating Background Callable Object.
[Creating Callable Objects for Background Execution|http://help.sap.com/saphelp_nwce10/helpdata/en/53/cde385301f4aa3b8e77a92cd46bff3/frameset.htm]
After giving the fully qualified java class name in the Implementation Class Name when i press next i am getting the error.
Please suggets me in solving this issue.
Regards,
S.V.Satish Kumar
Edited by: Sathish Kumar SV on Apr 4, 2009 10:34 AM

Hi, kavita.
First, make sure you choosed the correct container when you created the background CO.
Second, make sure your package name was "com.examples.bckgco" and class name was "UserDetailsCallableObject". The exception which you got just means you entered incorrect name.
It doesn`t relate to your program.
Best Regards.
Louis Huang.

Real Time Editing while Shared

is there anyway to unlock the script
while another person is editing, so that it shows in real time... also is there an in program CHAT option..?

The document is locked with the person who is editing it and its released when user saves the document. Then anyone else can acquire it. At a time lock for the document can be only with one of the authors.
The chat program, its already in our list of items but it might take substantial time for us to reach there.
How did you like the sharing feature? Do you suggest any improvements? How important is real time editing for you?
Thanks
Adobe Story team

Run time error while creating sales order in VA01

Dear all,
In our develpment server(ecc 6.0),while creating sales order in VA01 for a sales area, when ever entering material number and quantity and press enter, it is giving error and taking to Runtime error long text showing syntax error in program RK2LSFOC
application patch level for both production and development is same.
can any one suggest the solution please
Moderator message - Cross post locked
Edited by: Rob Burbank on Jan 7, 2010 10:03 AM

ths

Run time Error while Creating Expense request

Dear Friends ,
In   E-Payment ( Expense Claim )   creation , While clicking on Enter Receipts application is going to run time error for only one user.
Run time Error Info :
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Exception              CX_SY_REF_IS_INITIAL
Short text
     Access via 'NULL' object reference not possible.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "CL_WDR_P13N_UTILITIES=========CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
   The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
    caught in
   procedure "PRESET" "(METHOD)", nor was it propagated by a RAISING clause.
   Since the caller of the procedure could not have anticipated that the
   exception would occur, the current program is terminated.
   The reason for the exception is:
   You attempted to use a 'NULL' object reference (points to 'nothing')
   access a component (variable: "LR_CONTEXT_ELEMENT").
   An object reference must point to an object (an instance of a class)
   before it can be used to access components.
   Either the reference was never set or it was set to 'NULL' using the
   CLEAR statement.
How to correct the error
     Probably the only way to eliminate the error is to correct the program.
   If the error occures in a non-modified SAP program, you may be able to
   find an interim solution in an SAP Note.
   If you have access to SAP Notes, carry out a search with the following
   keywords:
   "OBJECTS_OBJREF_NOT_ASSIGNED" "CX_SY_REF_IS_INITIAL"
   "CL_WDR_P13N_UTILITIES=========CP" or "CL_WDR_P13N_UTILITIES=========CM002"
   "PRESET"
Information on where terminated
    Termination occurred in the ABAP program "CL_WDR_P13N_UTILITIES=========CP" -
     in "PRESET".
    The main program was "SAPMHTTP ".
    In the source code you have the termination point in line 60
    of the (Include) program "CL_WDR_P13N_UTILITIES=========CM002".
    The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
    procedure "PRESET" "(METHOD)", but it was neither handled locally nor declared
    in the RAISING clause of its signature.
    The procedure is in program "CL_WDR_P13N_UTILITIES=========CP "; its source
     code begins in line
    1 of the (Include program "CL_WDR_P13N_UTILITIES=========CM002 ".
Regards,
Suresh .

Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath

Run time error while creating a sales order by va01

hi ,
while i am creating a sales order a runtime error occurs as i fill entry for sole to party and then material and quantity and as i press enter. the run time error is:
error in current abap program "saplv61z" had to be terminated because it has come across the statement that unfortunately can not be executed.
kindly solve my problem.
thanks.

Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath

Run time error while creating sales order

hi all,
im working on ECC 4.7. normally when i create a sales order (VA01) and use incompletion log, it shows no errors. but when i start to save the same order . it shows a RUN TIME ERROR of ABAP . so plz help me to solve out this error
thanks\

Hi Tarun,
When you get a run time error, you can see the error analysis on the left hand side. Check what the analysis is saying and you may need an ABAPer to find out the exact reason for the dump. I am just guessing it could be due to number range.. just a guess.
Regards,
Raghav

ERROR : Cannot read the request body while creating new calendar event api.

Hi,
I was trying to create and update the calendar event using [POST] https://outlook.office365.com/api/v1.0/me/events and [PATCH] https://outlook.office365.com/api/v1.0/me/events/<eventId> respectively.
When i try with poster or postman, I get this error
{error: {code: "ErrorInvalidRequest" message: "Cannot read the request body."} }
its not working . Any help will be appreciated.
Note: GET events and DELETE Events are working. I think the API with payload is not working.
Test Data :
URL: https://outlook.office365.com/api/v1.0/me/events/
Method: POST
JSON Data(Payload):
"Subject": "Discuss the Calendar REST API",
"Body": {
"ContentType": "HTML",
"Content": "I think it will meet our requirements!"
"Start": "2015-01-06T07:03:07.481Z",
"End": "2015-01-05T07:03:07.481Z",
"Attendees": [
"EmailAddress": {
"Address": "[email protected]",
"Name": "Konveen"
"Type": "Required"
Error:
"error": {
"code": "ErrorInvalidRequest",
"message": "Cannot read the request body."

Hi Sahil,
I was able to make your request work fine against my Office 365 mailbox with 2 changes.
1. Can you please make sure you are adding header "Content-Type: Application/Json"?
2. Can you please make sure your end time is AFTER start time? Looks like there is a typo with your current request as the start time is on 2015-01-06 and end time is on 2015-01-05.
Hope that helps ...
Thanks,
Venkat

Run time error while creating Ecommerce Order

Dear Friends,
we are using ECC 6.0, Ecommerce 5.0 applications run internet sales.
After selecting the requried products from the product catalog while trying to save the order I am getting a Run time error and also my session is getting logged out of the web shop.
I have searched the threads on similar issue, but found no clue yet..
Any help is highly appreciated.
Regards
Sadhu Kishore

#1.5 #005056A31282001C0000000400001AD800047FB93365B5C7#1266333314895#/Applications/BusinessLogic#sap.com/crmentitlementinquiry#com.sap.isa.core.jmx.ext.ExtBootstrapper#Viw~t0yxJv!nzcjy*!6#67##n/a##157475101b0e11dfb011005056a31282#SAPEngine_Application_Thread[impl:3]_17##0#0#Error#1#/Applications/BusinessLogic#Java###Error in CCMS reporting: #1#unable to register MBeans#
24309   #1.5 #005056A3128200280000000000001AD800047FB938DA2ACD#1266333406410#/Applications/BusinessLogic#sap.com/crm~b2c#com.sap.isa.core.init.InitDescription.getInitializable#Guest#0##n/a##4c1152a01b0e11df8c0b005056a31282#SAPEngine_Application_Thread[impl:3]_36##0#0#Error#1#/Applications/BusinessLogic#Java###Initalization of failed.#1#com.sap.isa.advisor.backend.tst.AdvisorBackendTST#
24310   #1.5 #005056A31282002A0000000000001AD800047FB93AB6F382#1266333437660#/Applications/CRM_ICS_WFM/ICE/Default#sap.com/crm~wfdcs#com.saplabs.sis.opt.ServletBase.checkXCM(ServletBase.java:219)[hostXXX/]#Administrator#129##n/a##5eb1b1c01b0e11df9db4005056a31282#Thread[Thread-131,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#com.saplabs.sis.opt.ServletBase#Plain###(3131)Missing value for XCM configuration parameter 'cs.http.port'. A retry is scheduled in 30 seconds.[/Default]#
24311   #1.5 #005056A31282002B0000000000001AD800047FB93AB6FCE4#1266333437660#/Applications/CRM_ICS_WFM/ICE/Default#sap.com/crm~wfdcs#com.saplabs.sis.opt.ServletBase.checkXCM(ServletBase.java:219)[hostXXX/]#Guest#0##n/a##5eb1b1c11b0e11dfb98f005056a31282#Thread[Thread-129,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#com.saplabs.sis.opt.ServletBase#Plain###(3131)Missing value for XCM configuration parameter 'cs.http.port'. A retry is scheduled in 30 seconds.[/Default]#
24312   #1.5 #005056A31282002C0000000000001AD800047FB93AB6FF9E#1266333437660#/Applications/CRM_ICS_WFM/ICE/Default#sap.com/crm~wfdcs#com.saplabs.sis.opt.ServletBase.checkXCM(ServletBase.java:219)[hostXXX/]#Guest#0##n/a##5eb1b1c21b0e11dfa58b005056a31282#Thread[Thread-130,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#com.saplabs.sis.opt.ServletBase#Plain###(3131)Missing value for XCM configuration parameter 'cs.http.port'. A retry is scheduled in 30 seconds.[/Default]#
24313   #1.5 #005056A31282002F0000000000001AD800047FB93BC6D909#1266333455473#/Applications/BusinessLogic#sap.com/crm~cviews#com.sap.isa.core.init.InitDescription.getInitializable#Administrator#133##n/a##694fbe101b0e11dfcc96005056a31282#SAPEngine_Application_Thread[impl:3]_38##0#0#Error#1#/Applications/BusinessLogic#Java###Initalization of failed.#1#com.sap.isa.useradmin.handler.UseradminInitHandler#
24314   #1.5 #005056A3128200330000000000001AD800047FB93DD62A70#1266333490035#/Applications/Common/Infrastructure#sap.com/crmicss_b2c#org.apache.commons.digester.Digester#Guest#0##n/a##7de97c301b0e11df9146005056a31282#SAPEngine_Application_Thread[impl:3]_29##0#0#Error#1#org.apache.commons.digester.Digester#Java###system.forward.info#1#com.sap.engine.lib.xml.parser.NestedSAXParserException: com.sap.engine.lib.xml.parser.ParserException: Check whether the open and close tags are properly nested. (CharData is not allowed here.)(file://localhost/F:/usr/sap/EPD/JC10/j2ee/cluster/server0/apps/sap.com/crmicss_b2c/servlet_jsp/icss_b2c/root/WEB-INF/conf/struts-config.xml, row:118, col:9)(:main:, row=0, col=0) -> com.sap.engine.lib.xml.parser.ParserException: Check whether the open and close tags are properly nested. (CharData is not allowed here.)(file://localhost/F:/usr/sap/EPD/JC10/j2ee/cluster/server0/apps/sap.com/crm~icss_b2c/servlet_jsp/icss_b2c/root/WEB-INF/conf/struts-config.xml, row:118, col:9)#
24315   #1.5 #005056A3128200220000001000001AD800047FB961D04BAD#1266334093676#/Applications/Common/Infrastructure#sap.com/crm~b2b#com.sap.isa.maintenanceobject.backend.MaintenanceObjectHelper#UsernameXXX#234##hostXXX_EPD_101329050#UsernameXXX#e4dccfe01b0f11dfb50f005056a31282#SAPEngine_Application_Thread[impl:3]_11##0#0#Error#1#/Applications/Common/Infrastructure#Plain###Cache already initialized#
24316   #1.5 #005056A3128200220000001200001AD800047FB961F0F65E#1266334095816#/Applications/Common/Infrastructure#sap.com/crm~b2b#com.sap.isa.catalog.trex.TrexCatalogServerEngine#UsernameXXX#234##hostXXX_EPD_101329050#UsernameXXX#e4dccfe01b0f11dfb50f005056a31282#SAPEngine_Application_Thread[impl:3]_11##0#0#Warning#1#com.sap.isa.catalog.trex.TrexCatalogServerEngine#Java###Warning: #1#Invalid status 'DeletePending' for index df158fb17a0aebf19888005056a37c9edev020(CatalogKey: ZPC_EN)#
24317   #1.5 #005056A3128200220000001300001AD800047FB961F1C37B#1266334095879#/Applications/Common/Infrastructure#sap.com/crm~b2b#com.sap.isa.catalog.trex.TrexCatalogServerEngine#UsernameXXX#234##hostXXX_EPD_101329050#UsernameXXX#e4dccfe01b0f11dfb50f005056a31282#SAPEngine_Application_Thread[impl:3]_11##0#0#Warning#1#com.sap.isa.catalog.trex.TrexCatalogServerEngine#Java###Warning: #1#Invalid status 'DeletePending' for index df1657de7c2d2ff19888005056a37c9edev020(CatalogKey: ZPC_EN)#
24318   #1.5 #005056A3128200220000001400001AD800047FB961F25A6B#1266334095910#/Applications/Common/Infrastructure#sap.com/crm~b2b#com.sap.isa.catalog.trex.TrexCatalogServerEngine#UsernameXXX#234##hostXXX_EPD_101329050#UsernameXXX#e4dccfe01b0f11dfb50f005056a31282#SAPEngine_Application_Thread[impl:3]_11##0#0#Warning#1#com.sap.isa.catalog.trex.TrexCatalogServerEngine#Java###Warning: #1#Invalid status 'DeletePending' for index df17d4e1b2d57ff19888005056a37c9edev020(CatalogKey: ZPC_EN)#
24319   #1.5 #005056A3128200220000001500001AD800047FB961F2E857#1266334095941#/Applications/Common/Infrastructure#sap.com/crm~b2b#com.sap.isa.catalog.trex.TrexCatalogServerEngine#UsernameXXX#234##hostXXX_EPD_101329050#UsernameXXX#e4dccfe01b0f11dfb50f005056a31282#SAPEngine_Application_Thread[impl:3]_11##0#0#Warning#1#com.sap.isa.catalog.trex.TrexCatalogServerEngine#Java###Warning: #1#Invalid status 'DeletePending' for index df180971f2ad43f19888005056a37c9edev020(CatalogKey: ZPC_EN)#
24320   #1.5 #005056A3128200220000001600001AD800047FB961F403B4#1266334096019#/Applications/Common/Infrastructure#sap.com/crm~b2b#com.sap.isa.catalog.trex.TrexCatalogServerEngine#UsernameXXX#234##hostXXX_EPD_101329050#UsernameXXX#e4dccfe01b0f11dfb50f005056a31282#SAPEngine_Application_Thread[impl:3]_11##0#0#Warning#1#com.sap.isa.catalog.trex.TrexCatalogServerEngine#Java###Warning: #1#Invalid status 'DeletePending' for index df158fb17a0aebf19888005056a37c9edev020(CatalogKey: ZPC_EN)#
24321   #1.5 #005056A3128200220000001700001AD800047FB961F43A81#1266334096035#/Applications/Common/Infrastructure#sap.com/crm~b2b#com.sap.isa.catalog.trex.TrexCatalogServerEngine#UsernameXXX#234##hostXXX_EPD_101329050#UsernameXXX#e4dccfe01b0f11dfb50f005056a31282#SAPEngine_Application_Thread[impl:3]_11##0#0#Warning#1#com.sap.isa.catalog.trex.TrexCatalogServerEngine#Java###Warning: #1#Invalid status 'DeletePending' for index df1657de7c2d2ff19888005056a37c9edev020(CatalogKey: ZPC_EN)#
24322   #1.5 #005056A3128200220000001800001AD800047FB961F46D0E#1266334096051#/Applications/Common/Infrastructure#sap.com/crm~b2b#com.sap.isa.catalog.trex.TrexCatalogServerEngine#UsernameXXX#234##hostXXX_EPD_101329050#UsernameXXX#e4dccfe01b0f11dfb50f005056a31282#SAPEngine_Application_Thread[impl:3]_11##0#0#Warning#1#com.sap.isa.catalog.trex.TrexCatalogServerEngine#Java###Warning: #1#Invalid status 'DeletePending' for index df17d4e1b2d57ff19888005056a37c9edev020(CatalogKey: ZPC_EN)#
24323   #1.5 #005056A3128200220000001900001AD800047FB961F49D86#1266334096066#/Applications/Common/Infrastructure#sap.com/crm~b2b#com.sap.isa.catalog.trex.TrexCatalogServerEngine#UsernameXXX#234##hostXXX_EPD_101329050#UsernameXXX#e4dccfe01b0f11dfb50f005056a31282#SAPEngine_Application_Thread[impl:3]_11##0#0#Warning#1#com.sap.isa.catalog.trex.TrexCatalogServerEngine#Java###Warning: #1#Invalid status 'DeletePending' for index df180971f2ad43f19888005056a37c9edev020(CatalogKey: ZPC_EN)#
24324   #1.5 #005056A3128200340000000000001AD800047FB962954A0E#1266334106598#/Applications/UserInterface#sap.com/crm~b2b#com.sap.isa.isacore.DocumentHandler#UsernameXXX#234##hostXXX_EPD_101329050#UsernameXXX#e4dccfe01b0f11dfb50f005056a31282#SAPEngine_Application_Thread[impl:3]_33##0#0#Warning#1#com.sap.isa.isacore.DocumentHandler#Plain###b2b.dochandler.warn.notontop#
24325   #1.5 #005056A3128200290000004400001AD800047FB962D270BC#1266334110598#/Applications/UserInterface#sap.com/crm~b2b#com.sap.isa.isacore.uiclass.SalesDocumentBaseUI#UsernameXXX#234##hostXXX_EPD_101329050#UsernameXXX#e4dccfe01b0f11dfb50f005056a31282#SAPEngine_Application_Thread[impl:3]_20##0#0#Warning#1#com.sap.isa.isacore.uiclass.SalesDocumentBaseUI#Plain###UI parameter initial.newpos not set properly, 5 taken as default#
24326   #1.5 #005056A3128200350000000000001AD800047FB963A12DA7#1266334124145#/Applications/UserInterface#sap.com/crm~b2b#com.sap.isa.isacore.uiclass.SalesDocumentBaseUI#UsernameXXX#234##hostXXX_EPD_101329050#UsernameXXX#e4dccfe01b0f11dfb50f005056a31282#SAPEngine_Application_Thread[impl:3]_5##0#0#Warning#1#com.sap.isa.isacore.uiclass.SalesDocumentBaseUI#Plain###UI parameter initial.newpos not set properly, 5 taken as default#
24327   #1.5 #005056A3128200320000000100001AD800047FB963FE1C13#1266334130239#/Applications/BusinessLogic#sap.com/crm~b2b#com.sap.isa.core.eai.sp.jco.JCoConnectionStateful#UsernameXXX#234##hostXXX_EPD_101329050#UsernameXXX#e4dccfe01b0f11dfb50f005056a31282#SAPEngine_Application_Thread[impl:3]_21##0#0#Error#1#/Applications/BusinessLogic#Java###Error occcurred in EAI layer "".#2#com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: CPIC-CALL: 'CMRCV'
24328   null
24329   #parameters: [client]='null' [user]='null' [language]='null' [ashost]='null' [systemnumber]='null' [mshost]='null' [gwhost]='null' [gwserv]='null' [group]='null' [systemid]='null'
24330   Properties: {lang=en, passwd=?, sysnr=00, client=020, user=uname, ashost=hostXX, jco.client.type=A, maxcon=100, codepage=1100}
24331   Client not connected#
24332   #1.5 #005056A3128200320000000300001AD800047FB963FE781C#1266334130271#/Applications/UserInterface#sap.com/crm~b2b#com.sap.isa.isacore.action.order.MaintainBasketSimulateAction#UsernameXXX#234##hostXXX_EPD_101329050#UsernameXXX#e4dccfe01b0f11dfb50f005056a31282#SAPEngine_Application_Thread[impl:3]_21##0#0#Error#1#/Applications/UserInterface#Plain###A runtime exception occurred on the highest level#
24333   #1.5 #005056A3128200320000000500001AD800047FB963FEEFEB#1266334130302#/Applications/UserInterface#sap.com/crm~b2b#com.sap.isa.core.util.MessageListDisplayer#UsernameXXX#234##hostXXX_EPD_101329050#UsernameXXX#e4dccfe01b0f11dfb50f005056a31282#SAPEngine_Application_Thread[impl:3]_21##0#0#Error#1#/Applications/UserInterface#Plain###An exception has occurred: .#

Run time error while create Vendor master via MK01

Dear Experts,
when i try to create vendor master by MK01.....system throws run time error as below:
"The exception 'CX_BADI_MULTIPLY_IMPLEMENTED' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CVI_MAP_TITLE=================CP' has to be
terminated."
My current system is ECC 6 along with DBM. Business partner configuration is activated in the current system. I am getting this error after BP configuration. Could you please help me to fix this issue?.......Is it due to configuration or a dump from abap program?
Regards
Vetrivelan

Hii,
please search sdn before posting the threads.
check these links, it may help u............
Short Dump - CX_BADI_MULTIPLY_IMPLEMENTED - BADI Q1SR1
Short Dump - CX_BADI_MULTIPLY_IMPLEMENTED - BADI Q1SR1
CX_BADI_NOT_IMPLEMENTED
thanks.

Cannot check real time access while creating infopackge

Similar Messages

Maybe you are looking for