Cannot connect my office jet 4500 to my computer

How do I obtain the driver to scan from my office jet 4500 to my computer?

Officejet 4500 scan driver is available in below link. Based on your operating system, download and install 'Driver - Product Installation Software'.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=3919...

Similar Messages

Office Jet 4500 Sleep Mode

We installed a Office Jet 4500 Wireless printer 4-6 weeks ago. Everything is good accept it occassionally goes into 'sleep mode' when it has not been used for a couple of days. After trying several combinations of buttons, we cannot figure out how to get it back into normal operating mode without unplugging it. The manual is silent on this issue. Anybody have the magic code for waking up this machine after it has gone into sleep mode? Thanks in advance for your help.

Same problem here. I followed the instructions to supposedly turn off the sleep mode, but all that did was reset the entire machine--including the 85 speed dials I had entered. HP tech support is clueless about this problem.

I have a HP office Jet 4500 wireless All- In One, how do I delete the customer participation program

Hi
The customer Participation Program is taking up so much space that I want to remove it from my laptop.
I have a HP Office Jet 4500 wireless All In One. When I attempt to remove it I get a message that says if I remove the program
my device will no longer work.. How can I safely remove it without damaging my equiptment from working?

couple of questions about this:
Are you scanning from the printer, or with software on the computer? If from the computer, are you initiating the scan from Windows, HP software, or Word?
If you put a legal size document in the feeder, and press scan, unless the defaults have been changed to letter size, it should scan the entire legal size sheet. You should be able to go into the settings and change that if the default has been set to letter.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

I have an hp office jet 4500 and os maverick 10.9.4 and I can't get it to print after last upgrade, multiple malfunctions and error, help?

I have an hp office jet 4500 and os maverick 10.9.4 and I can’t get it to print after last upgrade, multiple malfunctions and error, help? I have tried deleting and resetting printer and re-installing update 6 times. Last update attempt showed none available??? I can’t load the software directly from HP because their only option is to use the software update option on the mac....frustrated!!! Help!!
I get blank pages that just run through the printer and a stats window that just 33% complete and goes no further.

I am going on the guess that an old driver is still installed...
Use Finder Go > go to folder, and go to /Library/Printers and delete the HP folder(s).
Reset the Printing System:
OS X Mavericks: Reset the printing system
Now, Add the printer in Print & Scan prefs.

Office Jet 4500 G510n Printer Ready but error comes up in status

I have a Office Jet 4500 G510n and a MacBook Pro 15 late 2006 Model 2, Ver 10.6.8
I upgraded the HD to a SSD and everything works find except the printer. I can go to Utility and the TEST PAGE prints OK.
However, on STATUS it reads: "error/library/Printers/hp/cups/inkjet1.driver/contents/macos/injet/failed
I have checked on drivers and all I saw were for the "extra Page" ...
Lost!!!!
This question was solved.
View Solution.

From research on this HP Support site, I found that in Mac OSX they auto download updates for printing. Did not think about transfering my old HD to a SSD that those updates would follow... they did not. So... I downloaded all the updates (driver)to my new SSD and the HP Printer works!

I have a Mac OS X 10.4.11 and a HP Office Jet 4500 Desktop. What driver can I use?

I have a Mini Mac desktop computer, MAC OS X 10.4.11 and a HP Office Jet 4500 Desktop printer. What driver can I use to install this printer?

Hey @Greenise,
Welcome to the HP Support Forums!
I would like to assist you today in getting the proper Full Feature Software and Driver package to install your HP Officejet 4500 Desktop All-in-One printer on your Mac OS X 10.4.11 Operating System.
Below is the link for the Full Feature Software and Driver Installer. Simply click on the link and select the 'Download' button in the top left hand corner. Once the download is complete just run through the on screen instructions to install your printer.
HP Officejet Full Feature Software and Driver (Universal) - Mac OS X 10.4,10.5 and 10.6.
Please let me know if this installer works for you and if you have any other questions. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

COMPATIBILTY OF MY WIRELESS OFFICE JET 4500 G510N PRINTER WITH THE IOS AIRPRINT SOFTWARE

IS MY WIRELES OFFICE JET 4500 G510N PRINTER COMPATIBLE WITH THE IOS AIRPRINT SOFTWARE IN THE IPAD2
This question was solved.
View Solution.

No. You can use it with the ePrint mobile app for iOS devices. You can find out more by following the links below. Hope this helps.
Supported Printers for the HP ePrint Mobile App or HP ePrint Home & Biz:
http://goo.gl/RsNpf
HP ePrint Mobile Apps FAQs:
http://goo.gl/33WFq
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Can print but not scan in Windows 8.1 to HP Office Jet 4500 510n-z

New computer over the weekend with Windows 8 installed. Upgraded to 8.1online My HP Office Jet all-in-one 4500 prints fine, but I have no way to scan. I tried using the HP website to download and install the full driver. When it gets to the installation page, it just hangs on the page trying to communicate with my printer. Cannot get past that page.
I also tried the HP Print and Scan Doctor utility. It recognizes my HP all-in-one, but when it goes to the first step of communicating with the selected product, it gets about 3/4 done and then just hangs.
I have tried disabling my firewall. Still no luck.
I tried going to Device Manager and having it searched for updated drivers. It says the current driver is up-to-date.
I tried Windows Fax and Scan. When I choose New Scan, it says I have no scanner installed.
Somewhere there is a big error in this mess that is not allowing my printer and Windows to allow this driver to be fixed. HELP!
This question was solved.
View Solution.

Hello 8latinfans,
I understand that when you are installing the full featured software, that it hangs on communicating with the product. I have included the following document, 'The Progress Bar on the Software Installation Stops or Stalls'. This will walk you through different steps to try and get the software installed.
If the above document fails to resolve the issue, please let me know if there are any specific error messages that you do get.
Thank you.
I worked on behalf of HP

Cannot connect to Office 365 using Powershell on Windows 7 SP1

Hi,
I was trying to connect to Office 365 using windows azure active directory module for Windows Powershell.
$Cred = Get-Credential
Connect-MsolService -Credential $cred
It failed on my windows 7 machine with the error
Connect-MsolService : Unable to authenticate your credentials. Make sure that your user name is
in the format: <username>@<domain>. If this issue persists, contact support.
This issue happened in Windows 7 SP1 OS.
But, when I tried the same thing on a Windows 2008 R2 VM, it connected successfully.
This means that the account I was trying to login does have the permissions.
Both the machines ( windows 7 and windows server 2008 R2) have the following pre-requisites installed:
Install Microsoft Online Services Sign-in Assistant: http://www.microsoft.com/en-us/download/details.aspx?id=39267
Windows Azure Active Directory Module for Windows PowerShell (64-bit version)
I checked for other settings needed for this to work at :
(Though these settings are for Windows 8, I have all these settings in Windows 7 as well)
http://community.spiceworks.com/how_to/show/45453-how-to-prepare-a-windows-8-64-bit-pc-to-manage-windows-azure-ad-office-365-using-windows-powershell
Can someone please tell what is going wrong on my Windows 7 SP1 environment.
Thanks,
Gagan
Gagan

Hi,
Have you install installed .NET Framework 4.5 and Windows Management Framework 3.0 on Windows 7 Service Pack 1 (SP1)?
Please go through the below article to know more about what is the requirements to Connect to Exchange Online Using Remote PowerShell:
http://technet.microsoft.com/en-us/library/jj984289(v=exchg.150).aspx
In addition that, hope the below link be helpful:
Connect-MsolService : Unable to authenticate your credentials. (Wrong WebServiceUrl value in Registry)
http://jesperstahle.azurewebsites.net/?p=42
Regards,
Yan Li
Regards, Yan Li

How do I print from my I-pad2 to my office jet 4500 g510n

How do I print from my I-pad2 to my price jet 4500 g510n.

Hi,
Firstly please check to see is your printer in this list ?
http://support.apple.com/kb/ht4356
If Yes, please follow this checklist and fix:
iPad: http://www.apple.com/support/ipad/assistant/airprint/
If No, probably you have to print indirect way.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Cannot connect iTunes to the Music Store, Dell computer, XP Pro

I have a Dell XPS computer (about 2.5 years old) running Windows XP Pro w/service pack 2.
I bought an iPod way before Christmas, and have never (not once) been able to access the music store from my computer. Sometimes the "progress bar" just shows the "candy cane" progress meter with zero progress, sometimes the progress bars gets to about 90%, sometimes the progress bar completes, and I actually get an opening page displayed from the music store, but I can never get ANY further, cannot login, setup a new account, authorize my computer for any music, etc.
My wife's computer just a few feet away from mine, is a newer Dell XPS running XP Service Pack2, same home network, same router, SAME ISP, all works fine. Zero on my computer.
As stated it's XP Pro, w/service pack 2. Norton AntiVirus 2003 (OEM from Dell), using the XP Firewall, no other accelerator software etc.
I've tried:
a) disabling Norton
b) disabling Firewall
c) I've done the msconfig startup (as detailed online), not allowing anything must MS services and iPod programs to start up
I'm getting really, really tired of this. This is the ONLY program on my computer not working properly and requiring this kind of time. I'm extremely computer saavy (write my own software in vb.net, etc.) and can try anything anyone suggests, but so far NOTHING has made any difference.
Based on the logic that my wife's computer works fine, I'd say it's not the network, router, router firewall, ISP or any of those usual suspects. In fact I've tried dialup too direct from my computer (just to try and authorize ONE video my wife bought I would like to play on mine) but no luck.
Any other suggestions. Honestly - not accessing the Music Store isn't the end of the world to me entertainment wise. but it really, really frustrates me that Apple is no help (oh yes, I emailed them too and got the boilerplate response) and that I can't get on.
Sorry for such a long post, any ideas?
Dell XPS Windows XP Pro XP Pro Service Pack 2, Norton Antivirus 2003
Dell XPS Windows XP Pro XP Pro Service Pack 2

1) What exactly would I check on the router to make sure it's open it iTMS for MY computer? I know I said I'm an "advanced user" but you got me on that one, lol!
That would depend on the router. I know that some routers with firewalls control the ports individually by internal IP address, but without knowing your model of router, I don't know if that applies in your case (and I might well not know even if you told me the model; I'm only familar with a couple). If your router has a firewall and it can be shut off completely, you might give that a try as a test.
2) I'll try uninstall and reinstall again. I've never done the registry entry check, so just search for "itunes" and stuff like that and delete?
iTunes and QuickTime, yes. CCCleaner (freeware) might help.
3) Is there any benefit to doing the entire re-install while in the msconfig "startup" mode, i.e. with everything else turned off?
That I can't say, not having done it. Sorry; perhaps someone else will have an opinion about that.

Office jet 4500 wireless cannot print from Internet Explorer 9

Since I installed IE9 I can no longer print webpages and I get an errormessage when I try to, whereas printing in MS Office works just fine.
My OJ 4500 Wireless is installed on a Windows 7 (64 bit) machine.
I tried solving the problem by downloading and installing the latest full version driver, but the problem persists.
Who can help me?

Hi ATOL,
It sounds like you might be selecting properties instead of "printer properties".
Double check and make sure that you're selecting "printer properties" from the list.

I'm trying to connect my mac book pro to my hp office jet 4500 with a usb and my mac and printer don't seem to be acknowledging the other

I cant seem to connect my mac book pro to my hp officejet using a usb cord the two don't seem to be acknowledging eachother and the printer never shows up in the quque

well i plug it into the computer and go to system preferences then to printers and scanners nothing shows up so i press the + in the lower left corner and their is never a printer available to add. i already updated everything like hp says to do bt i can't get it to work

Loaded new cartridge. alignment failed. now cannot print from hardcopy or pc. Office Jet 4500 G510n.

I loaded a color cartridge and started alignment. Alignment failed and disply said will use default values. Now I printer acts like it is printing, but it produces a blank page. This occurs whether I I try to copy from a printed form or or attempt to print from my pc.

This article should help resolve your blank pages:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP Office Jet 4500 G510n-z fails to print on wireless network

Hi,
A while back my XP machine (Dell D620) stopped printing wirelessly with my officejet 4500 G510n-z. My Windows 7 D630 prints wirlessly with no problems. I have download the current HP drivers to no avail. I have looked at other posts but no workable solutions. The 4500 G510n-z appears as a printer but all print jobs end in an error. I cannot print a test page, notepad etc. All the jobs appear on the queue but they all error out. It seems to be an XP specific problem. I have XP pro version 2002 sevice pack 3. My network is just a Verizon Fios wireless router. In windows 7 I can see the actual address of the Hp wireless connection when the printer is added. In Xp I don't see the wireless address when I try to add the printer. Now it appears in the printer list on XP but 7 appears to see the actual wireless address and allows me to select it to add the printer. I have connected the XP machine to the printer and it would work for a while then stops working. Not sure what triggers the loss of connection. How can I specify the 4500 G510n-z connection for XP? I tried adding the IP address I see on my 7 machine but XP wants a server path that is //server etc UNC path.
I went into the printer properties and changed the address to match the 7 ip address 192.168.1.3 XP 192.168.1.9 Windows 7 but no go still.
Thanks
Al
This question was solved.
View Solution.

Thanks for all the help!. After the reinstall the printer IP which now ends in .3 is the same for my XP and 7 machines. I tested my machines to be sure. Both are printing fine thanks to your help!

Cannot connect my office jet 4500 to my computer

Similar Messages

Maybe you are looking for