Cannot Connect Remotely to WMI

I have run into an issue with our Windows 7 machines and am having trouble diagnosing the cause. I am unable to connect remotely to any of the Windows 7 machines' WMI. Every time I try, I get the error "RDP server is unavailable". I can ping the
workstations and connect to the C:\ drive. I can use the Remote Tools capability from within SCCM. I have gone through the DCOM security settings, ensured the Remote Procedure Call, Remote Procedure Call Locator, WMI, WMI Performance Adapter, TCPIP/IP NetBIOS
Helper, Server and Workstation services are all running. I even disabled the AV on the client. Remote tests using SCCM Right-Click Tools, wbemtest and WMI Tools have all failed with the same error. I have also tried using the same tools by IP address and FQDN.
I have no issues with XP machines on the same network/subnet. Where else can I fish? Thanks for your time.
Eric

Hi,
I have been able to find this blogs:
Let’s troubleshoot WMI (Part 1: Remoting and Security)
For the RPC server is unavailable error when connecting with WMI, it means the Machine does not exist or The Machine cannot respond because the appropriate firewall exceptions have not been made.
Please take a check with that the File and Printer Sharing is enabled on the Windows Firewall Exceptions list for the following ports:
135 (RPC)
445 (TCP)
103x (mostly 1037)
441 (RPC)
Please take a try to modify this policy if the above didn't work:
enable : Allow remote administration exception, or use Netsh command:
Help: Enable or disable the remote administration exception
Reference here:
WMI Troubleshooting Guide
Hope this may help
Best regards
Michael Shao
TechNet Community Support

Similar Messages

SCCM Right Click tools , cannot connect to the WMI namespace

Hi All,
I think you all know the right click tools for SCCM, there's a strange problem at my SCCM environment, when I use right click tool to push user policy it said "cannot connect to the WMI namespace on PC01.." , but other
policy like machine it works fine. If I manually initiate from PC01 it works also.
Already uninstall and install the right click tools, restart the server, but still no luck, any ideas ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Remote user policy request; I don't use the right-click tools, so I don't know what the code inside looks like. But from past experience, getting the remote user policy refresh to work right was tricky.
First question though: do you actually need to remote user policy refresh? Do you currently deploy advertisements to collections, where the collection membership is either a bunch of usernames, or is a single entry of a domain usergroup? If you
don't currently deploy to users or users in a usergroup, you really don't need to trigger a remote user policy refresh. There's nothing to find anyway, from the client to the management point.
If you do deploy to users or users in a usergroup; you might want to get a copy of Roger Zanders' Client Center, and see if that remote trigger for user policy works.
Standardize. Simplify. Automate.

Cannot connect remotely, setup is correct but did not try port mapping, i don,t know how please help

could someone please point me to the possible areas on my server where i can check why i cannot connect remotely. I have been trying for the past two months without success. i did not tru port mapping cause I don;t know how to do this and I was told that port mapping on my time machine is done automatically. I am running a mac mini lio server 10.7.3 Time capsule.

Most people are going to see that message as a result of not properly closing Firefox, and then attempting to reopen Firefox. This problem is most likely to occur on Windows Operating systems, less frequently on Linux and Mac systems but not unheard of on any system.
Because you are on a Mac, I am referring you directly to an article that has been reworded for each operating system.
: http://kb.mozillazine.org/Kill_application
To properly close Firefox on your Mac use "Firefox" button -> Quit Firefox, and not with the "X" in corner of window which simply closes the window and not necessarily Firefox.
When you get stuck as you have described you must Force Firefox to terminate as described at the end of the article:
Mac OS X
:Open Apple Menu and select "Force Quit". For Mac OS X 10.3 and later, you can also use the Activity Monitor found in your "Utilities" folder (Applications -> Utilities -> Activity Monitor).
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

Suddenly Cannot Connect Remotely

Hi there,
I went away for a few days and decided to unplug my Time Capsule while I was gone..I realize now that this wasn't the best idea.
I used to be able to connect remotely without problems and I've had no problems whatsoever until now.
When I try to "Connect to Server" now, I get "The Finder cannot complete the operation because some data in afp://XX.XXX.XXX.XX could not be read or written. (Error Code -36)".
Can someone please tell me whats going on and why I suddenly cannot connect remotely?
Thank you,
Josh

I just began experiencing the same thing. I hope someone can help with an answer!

Cannot connect remotely to Database

Dears,,
I can connect to database as following:
sqlplus sys/pass as sysdba
But when trying to connect remotely as following:
sqlplus sys/pass@vis as sysdba ( It gave me error )
[oravis@ebsibm dbs]$ sqlplus sys/pass@vis as sysdba
SQL*Plus: Release 10.2.0.3.0 - Production on Sat Apr 25 09:34:24 2009
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
ERROR:
ORA-01031: insufficient privileges
Enter user-name:
_[oravis@ebsibm VIS_ebsibm]$ tnsping vis_
TNS Ping Utility for Linux: Version 10.2.0.3.0 - Production on 25-APR-2009 10:15:25
Copyright (c) 1997, 2006, Oracle. All rights reserved.
Used parameter files:
_/oracle/VIS/db/tech_st/10.2.0/network/admin/VIS_ebsibm/sqlnet_ifile.ora_
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=ebsibm.othaim.corp.net)(PORT=1521)) (CONNECTDATA= (SERVICE_NAME=VIS) (INSTANCE_NAME=VIS)))_
OK (10 msec)
Note: I already created the password file
[oravis@ebsibm dbs]$ orapwd file=/oracle/VIS/db/tech_st/10.2.0/dbs/orapwvis password=pass entries=10
However, no records in v$pwfile_users:
SQL> select *
2 from v$pwfile_users;
no rows selected
Please, need your help ASAP
Edited by: user4520487 on Apr 24, 2009 11:49 PM

Dear,,
db listener cannot be started.
see the following please ( May be there are errors in these files )
tnsnames.ora
# This file is automatically generated by AutoConfig. It will be read and
# overwritten. If you were instructed to edit this file, or if you are not
# able to use the settings created by AutoConfig, refer to Metalink Note
# 387859.1 for assistance.
#$Header: NetServiceHandler.java 120.16.12000000.3 2007/09/14 10:00:07 schagant ship $
EBS=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=EBS)
(INSTANCE_NAME=EBS)
IFILE=/oracle/EBS/db/tech_st/10.2.0/network/admin/EBS_localhost/EBS_localhost_ifile.ora
listener.ora
# $Header: ad8ilsnr.ora 120.1 2006/06/07 05:52:02 sbandla noship $
# This file is automatically generated by AutoConfig. It will be read and
# overwritten. If you were instructed to edit this file, or if you are not
# able to use the settings created by AutoConfig, refer to Metalink Note
# 387859.1 for assistance.
# Net8 definition for Database listener
EBS=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521))
(CONNECT_DATA=(SERVICE_NAME=EBS)(INSTANCE_NAME=EBS))
#STARTUP_WAIT_TIME_EBS = 0
#CONNECT_TIMEOUT_EBS = 10
#TRACE_LEVEL_EBS = OFF
#LOG_DIRECTORY_EBS = /oracle/EBS/db/tech_st/10.2.0/network/admin
#LOG_FILE_EBS = EBS
#TRACE_DIRECTORY_EBS = /oracle/EBS/db/tech_st/10.2.0/network/admin
#TRACE_FILE_EBS = EBS
#ADMIN_RESTRICTIONS_EBS = OFF
#SUBSCRIBE_FOR_NODE_DOWN_EVENT_EBS = OFF
IFILE=/oracle/EBS/db/tech_st/10.2.0/network/admin/EBS_localhost/listener.ora
Sqlnet.ora
# This file is automatically generated by AutoConfig. It will be read and
# overwritten. If you were instructed to edit this file, or if you are not
# able to use the settings created by AutoConfig, refer to Metalink Note
# 387859.1 for assistance.
#$Header: NetServiceHandler.java 120.16.12000000.3 2007/09/14 10:00:07 schagant ship $
NAMES.DIRECTORY_PATH=(TNSNAMES, ONAMES, HOSTNAME)
SQLNET.EXPIRE_TIME= 10
SQLNET.AUTHENTICATION_SERVICES=(NTS)
IFILE=/oracle/EBS/db/tech_st/10.2.0/network/admin/EBS_localhost/sqlnet.ora

Cannot Connect Remote

Hey, I'm trying to connect my iPod Touch (1st Gen) to my PC.
I have the iPod connected to the WLAN network, and the PC is connected to the network with an ethernet cable. Both connect directly to the same router.
However Ive been fiddling with my firewall, router, iTunes and iPod for a while and still can't get it to see eachother.
How can I get them to both connect?
I had them able to connect before but the PC was connected with a wireless USB adapter.

I do this exact thing. You have to open the firewall port on your computer for iTunes music sharing, That will allow communication between the iTunes and the remote. I don't know if windows logs firewall denies as verbosely as mac does but look for repeated attempts from a 192. or whatever your network has on a high port number three thousand something, I cannot remember it right now, sorry.

Cannot connect Remotely for SQL Server 2008

Hi,
I have SQL Server 2008 installed and configured as server locally. So when I try to connect using same machine with IP address it works but when I try to connect through any other computer through internet, it does not work and gives the following error.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named pipes provider, error: 40 could not open a connection to sql server) (Microsoft SQL Server,
Error: 53 )
please note that:
- I have amended Internet Protocol version 4 (TCP/IPv4) properties with my current IP address, subnet mask, default gateway and all Sky(ISP) preferred/alternate DNS Server names.
- SQL server configuration manager shows that TCP/IP is enabled and it is on 1433 port.
- SQL, SQL Browser exe and SQL server windows NT is ON for firewall's Port, Domain and public.
- Router is added with outbound services and Inbound services for SQL port 1433 and SQL browser 1434.
- SQL server instance is enabled for remote connections.
Kindly help, I am almost there and do not want to give up. Thanks in advance.
Adnan

Hello Adnan,
See TechNet
Connecting to SQL Server over the Internet for how to setup your enviroment to Access your SQL Server over public Internet
Olaf Helper
[ Blog] [ Xing] [ MVP]

Cannot connect remote database

hi,
i have my database on aix(oracle 10g rac) but i cannot access other database from my aix machine . i have entry of other database into my tns file.
when i trying to connect
username@sid
i get tns problem.wt to do ?
thxs

ORA-12154:     TNS:could not resolve the connect identifier specified
Cause:     A connection to a database or other service was requested using a connect identifier, and the connect identifier specified could not be resolved into a connect descriptor using one of the naming methods configured. For example, if the type of connect identifier used was a net service name then the net service name could not be found in a naming method repository, or the repository could not be located or reached.
Action:
- If you are using local naming (TNSNAMES.ORA file):
- Make sure that "TNSNAMES" is listed as one of the values of the NAMES.DIRECTORY_PATH parameter in the Oracle Net profile (SQLNET.ORA)
- Verify that a TNSNAMES.ORA file exists and is in the proper directory and is accessible.
- Check that the net service name used as the connect identifier exists in the TNSNAMES.ORA file.
- Make sure there are no syntax errors anywhere in the TNSNAMES.ORA file. Look for unmatched parentheses or stray characters. Errors in a TNSNAMES.ORA file may make it unusable.
- If you are using directory naming:
- Verify that "LDAP" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
- Verify that the LDAP directory server is up and that it is accessible.
- Verify that the net service name or database name used as the connect identifier is configured in the directory.
- Verify that the default context being used is correct by specifying a fully qualified net service name or a full LDAP DN as the connect identifier
- If you are using easy connect naming:
- Verify that "EZCONNECT" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
- Make sure the host, port and service name specified are correct.
- Try enclosing the connect identifier in quote marks. See the Oracle Net Services Administrators Guide or the Oracle operating system specific guide for more information on naming.
If any of these is not working for you,post here your tnsname, listener and sqlnet.ora files.
Aman....

PAPI cannot connect remote Engine

Hi, all,
I have a OBPM 10gR3 engine deployed in remote server with Sun IPLANET Directory Service.
I try to connect the engine by using PAPI, but error report:
Exception in thread "Main Thread" fuego.configuration.ConfigurationRuntimeException: No factory registered for this configuration.
Detail:There is no factory registered to handle [IPLANET] for the type [JNDI].
     at fuego.configuration.ConfigurationRuntimeException.subTypeNotRegistered(ConfigurationRuntimeException.java:129)
     at fuego.configuration.ConfigurationLoader.addConfig(ConfigurationLoader.java:159)
     at fuego.configuration.ConfigurationLoader.endElement(ConfigurationLoader.java:69)
     at fuego.directory.DirectoryConfigurationLoader.endElement(DirectoryConfigurationLoader.java:57)
     at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(AbstractSAXParser.java:601)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(XMLDocumentFragmentScannerImpl.java:1772)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(XMLDocumentFragmentScannerImpl.java:2923)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:647)
     at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:508)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:807)
     at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737)
     at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:107)
     at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1205)
     at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.java:522)
     at javax.xml.parsers.SAXParser.parse(SAXParser.java:395)
     at javax.xml.parsers.SAXParser.parse(SAXParser.java:198)
     at fuego.configuration.ConfigurationLoader.parse(ConfigurationLoader.java:119)
     at fuego.directory.DefaultDirectoryConfiguration.create(DefaultDirectoryConfiguration.java:52)
     at fuego.directory.DirectoryConfigurationResource.load(DirectoryConfigurationResource.java:81)
     at fuego.directory.DirectoryConfigurationManager.loadDirectoryConfiguration(DirectoryConfigurationManager.java:392)
     at fuego.directory.DirectoryConfigurationManager.getDirectoryConfiguration(DirectoryConfigurationManager.java:331)
     at fuego.directory.DirectoryConfigurationManager.getDirectoryConfigType(DirectoryConfigurationManager.java:313)
     at fuego.directory.provider.Factory.getDirectoryFactory(Factory.java:216)
     at fuego.directory.Directory.startAnonymousSession(Directory.java:211)
     at fuego.papi.impl.ProcessServiceFactoryImpl.obtainSchemaId(ProcessServiceFactoryImpl.java:193)
     at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:75)
     at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:63)
     at fuego.papi.ProcessService.create(ProcessService.java:335)
     at com.obpmpapiclient.PapiExample.main(PapiExample.java:29)
I checked the directory.xml, and found config:
          <configuration name="organization" type="JNDI" subtype="IPLANET">
               <property name="java.naming.factory.initial" value="com.sun.jndi.ldap.LdapCtxFactory"/>
               <property name="jdbc.pool.idle_timeout" value="5"/>
               <property name="jdbc.pool.entry.max" value="10"/>
               <property name="java.naming.referral" value="follow"/>
               <property name="java.naming.security.principal" value="uid=bpmadmin,dc=oracle,dc=com"/>
               <property name="jdbc.pool.min" value="0"/>
               <property name="custom.com.sun.jndi.ldap.connect.pool" value="true"/>
               <property name="java.naming.provider.url" value="ldap://ozone.oracle.com:37102/dc=oracle,dc=com"/>
               <property name="jdbc.pool.max" value="10"/>
               <property name="java.naming.security.credentials" value="<encrypted>XIX/CNqaHWA="/>
          </configuration>
It seems that No factory registered for IPLANET. How to deal with it? Thanks in advanced.
Best Regards,
Bill

Hi,
I was having the same issue here. I found a workaround solution since I was in a hurry: add ALL .jar found in you ENTERPRISE_HOME/webapps/workspace/WEB-INF/lib directory.
It seems it's just a matter of depency. Since I had no time to look for the exactly .jars needed, I add it all.
Hope it helps.
Regards,
Alexandre Jacques

Cannot connect remotely to home computer

I would appreciate some troubleshooting help, with regard to my inability to connect to my home computer from my iBook, which is in a remote location.
At home, I have an iMac connected to DSL, using a Belkin router. I have opened up port 548 on the router, which is supposed to allow access to my files from outside the home network. I have also turned on file sharing in system prefs.
At work, I'm connected to the Internet via a Windows-based network (but using an iBook). I go to Connect to Server under the Go menu, type in the afp address of my home iMac that was indicated under the home machine's sharing prefs., but then nothing happens. Well actually, I get a message that the server can't be found.
I know my home computer is on (I made sure it wouldn't sleep), and I opened up the port that is for afp, so what could be the problem?
Thanks for your help.

Could be something with that port. Have you tried Remote Login through shh to see if that worked?
If you allow remote login, you can use SSH (Secure Shell) to log in to your computer from another location.
You can't use Telnet to log in to the computer.
Open System Preferences and click Sharing.
Click Services and select the Remote Login checkbox. Selecting Remote Login also also enables the secure FTP (sftp) service.
Now you can use an SSH client to log in from another computer.
For example, if your user name is steve and your computer's IP address is 10.1.2.33, you can open Terminal on another Mac OS X computer and type:
ssh -l steve 10.1.2.33
Type "man ssh" at a Terminal shell prompt for more information.
See this Apple page for more:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh294.html
For Personal File Sharing do this:
1. Be sure you are already connected to the Internet.
2. Choose Connect to Server from the Go menu.
3. In the Address field, type either the IP address or the DNS name of the computer to which you wish to connect (Note 4).
4. Click Connect.
See this Apple Page for more.
http://docs.info.apple.com/article.html?artnum=107369
Also you may have a OSX firewall on or 3rd party firewall that is blocking this port.
Personal File Sharing uses 548, and 247 for it's ports.

TS1741 Airplay stopped working between iPhone 5 and Apple TV. Icon no longer appears cannot connect remote app anymore either?

Anybody have ideas why.

Most likely because your phone or your Apple TV has lost WiFI connection to your local network. Not enough info in your post for a more specific suggestion.

Cannot connect remotely from another Mac

I recently purchased a MacBook Pro from a reseller which was on display because it was the very last one in stock. Because of that fact it came with the store's user settings, usernames, etc. I changed all the settings (at least I think I did) and installed all my software without any complications but just recently I tried sharing my MB Pro screen on my wife's iMac and OS X Lion does not recognize my user name and password.
I tried sharing my wife's iMac's screen on my MB Pro and that worked without problems. I also tested sharing my old MB Pro's screen on her iMac and it worked properly! I don't know what the issue is and I'm afraid I'll have to install Lion on my new MB Pro from scratch. I mean, I don't want to go through the hassle of installing all my software, transfering my files, etc. Please help!
Thanks!!

I'm gonna give iChat a try and will let you know of my results. Thanks.
By WiFi Band do you mean "are they on the samen network"? Because if so, yes they are on the same network. I'm going to try creating a new user or logging in as Guest to see what results I get and will also let you know.
Thanks again!

Domain users cannot connect to the network folders when logged in via rds remote apps

Hi,
recently I setup an RDS farm for remote apps on server 2012 r2.
all users can connect to the apps published. no problems there.
but when users connect via rds they cannot connect to the networkfolders and cannot store the resultance of there work (docx and xlsx files)
all users are normally connected to the networkfolders using a small login batch file handing down the unc path needed. when I log in as domain admin, also using a login batch, connections are setup correctly. It seems to me to be an security issue on the
rds session host.
how to alter this?
greetz, Fons
Fons system and network engineer Balie Amsterdam

Hi,
Thank you for posting in Windows Server Forum.
We use WMI to communicate with the RDSH server. Various issues can cause WMI to deny access or return error codes. Here's a few things you can try:
1. Check if the "TS Web Access Computers" security group on the RDSH server has incorrect permissions in DCOM and/or WMI:
For checking DCOM security settings:
1. Start the Component Services MMC snapin
2. Navigate to Component Services -> Computers -> My Computer
3. Right-click on My Computer and select properties
4. Go to the COM Security tab
5. Under Access Permissions, click the Edit Limits button
6. Ensure that TS Web Access Computers is in the list, with all of the permissions set to “allow”.
7. Under Launch and Activation Permissions, click the Edit Limits button
8. Ensure that TS Web Access Computers is in the list, with all of the permissions set to “allow”.
For checking WMI security settings:
1. Start the WMI Control MMC snapin
2. Right-click the WMI Control node and select properties
3. Go to the Security tab
4. Navigate to Root->CIMV2->TerminalServices
5. With TerminalServices selected, click the Security button
6. Ensure that TS Web Access Computers is in the list with Execute Methods, Enable Account, and Remote Enable set to "allow"
2. Verify the RD Session Host server's firewall allows WMI calls.
3. Verify that the RD Connection Broker hasn't lost its trust relationship with the domain.
4. See if non-RDS related WMI calls can be successfully made to the RDSH server. This can help differentiate between a general WMI issue and an issue calling the RDS WMI provider.
(Quoted from following thread.)
RemoteApp Source not working from RDWeb
http://social.technet.microsoft.com/Forums/windowsserver/en-US/173d4546-e12f-47c1-ac66-8b4f69826892/remoteapp-source-not-working-from-rdweb?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

Server 4: Cannot connect to remote server: "lost contact with the AuthService"

Attempting to upgrade to Server 4; have Server 4 app on my local Mac to administer a remote Mac mini running Server 4. Server app 4 on the mini connects to itself; however, I cannot user Server app 4 on my local Mac to connect remotely to the mini. Have verified the machine name, user, and password are all correct (they haven't changed and worked fine under Server 3.2.2). Console on the local machine shows the following error:
12/27/14 5:56:27.303 PM Server[4193]: Connected to the Auth Service
12/27/14 5:56:27.303 PM Server[4193]: authenticateToServermgrdAs: connection returned an error Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.servermgrd.auth was invalidated.) UserInfo=0x60800047f780 {NSDebugDescription=The connection to service named com.apple.servermgrd.auth was invalidated.}
12/27/14 5:56:27.304 PM Server[4193]: We have lost contact with the AuthService we will need to reauth
Any ideas on how to troubleshoot? Thanks --

Export the com.apple.servermgrd certificate from your server. Import it on your local computer and ensure that it is set to Always Trust. Ensure that you also follow the directions from the article linked below.
How to administer OS X Server remotely using Server App - Apple Support

Error:Cannot connect to WMI provider. You do not have permission or the server is unreachable

I'm getting the below message when i try and access SQL Config Manager on my Windows Server 2003 R2
"Cannot connect to WMI provider. You do not have permission or the server is unreachable. Note that you can only manage SQL Server 2005 and later servers with SQL Server Configuration Manager.
Generic failure [0x80041001]"
Also tries with the below solution but still the error persists
The solution is to go to a command prompt as administrator and then run mofcomp.
C:\Program Files\Microsoft SQL Server\90\Shared>mofcomp "C:\Program Files\Microsoft SQL Server\90\Shared\sqlmgmproviderxpsp2up.mof"
Below was the output of the command:
Microsoft (R) 32-bit MOF Compiler Version 5.2.3790.1830
Copyright (c) Microsoft Corp. 1997-2001. All rights reserved.
Parsing MOF file: C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmp
roviderxpsp2up.mof
(1): error SYNTAX 0X8004402f: Error creating temporary file
Compiler returned error 0x8004402f
C:\Program Files (x86)\Microsoft SQL Server\100\Shared>
Can anyone tell how this problem can be solved?

Sorry for the mistake.The command prompt is
C:\Program Files (x86)\Microsoft SQL Server\100\Shared>mofcomp "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
And error i got is
Microsoft (R) 32-bit MOF Compiler Version 5.2.3790.1830
Copyright (c) Microsoft Corp. 1997-2001. All rights reserved.
Parsing MOF file: C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmp
roviderxpsp2up.mof
(1): error SYNTAX 0X8004402f: Error creating temporary file
Compiler returned error 0x8004402f
C:\Program Files (x86)\Microsoft SQL Server\100\Shared>
I hav checked that sqlmgmproviderxpsp2up.mof is in C:\Program Files (x86)\Microsoft SQL Server\100\Shared\ folder.

Cannot Connect Remotely to WMI

Similar Messages

Maybe you are looking for