Domain users cannot connect to the network folders when logged in via rds remote apps

Hi,
recently I setup an RDS farm for remote apps on server 2012 r2.
all users can connect to the apps published. no problems there.
but when users connect via rds they cannot connect to the networkfolders and cannot store the resultance of there work (docx and xlsx files)
all users are normally connected to the networkfolders using a small login batch file handing down the unc path needed. when I log in as domain admin, also using a login batch, connections are setup correctly. It seems to me to be an security issue on the
rds session host.
how to alter this?
greetz, Fons
Fons system and network engineer Balie Amsterdam

Hi,
Thank you for posting in Windows Server Forum.
We use WMI to communicate with the RDSH server. Various issues can cause WMI to deny access or return error codes. Here's a few things you can try:
1.  Check if the "TS Web Access Computers" security group on the RDSH server has incorrect permissions in DCOM and/or WMI:
   For checking DCOM security settings:
   1. Start the Component Services MMC snapin
   2. Navigate to Component Services -> Computers -> My Computer
   3. Right-click on My Computer and select properties
   4. Go to the COM Security tab
   5. Under Access Permissions, click the Edit Limits button
   6. Ensure that TS Web Access Computers is in the list, with all of the permissions set to “allow”.
   7. Under Launch and Activation Permissions, click the Edit Limits button
   8. Ensure that TS Web Access Computers is in the list, with all of the permissions set to “allow”.
   For checking WMI security settings:
   1. Start the WMI Control MMC snapin
   2. Right-click the WMI Control node and select properties
   3. Go to the Security tab
   4. Navigate to Root->CIMV2->TerminalServices
   5. With TerminalServices selected, click the Security button
   6. Ensure that TS Web Access Computers is in the list with Execute Methods, Enable Account, and Remote Enable set to "allow"
2.  Verify the RD Session Host server's firewall allows WMI calls.
3. Verify that the RD Connection Broker hasn't lost its trust relationship with the domain.
4. See if non-RDS related WMI calls can be successfully made to the RDSH server. This can help differentiate between a general WMI issue and an issue calling the RDS WMI provider.
(Quoted from following thread.)
RemoteApp Source not working from RDWeb
http://social.technet.microsoft.com/Forums/windowsserver/en-US/173d4546-e12f-47c1-ac66-8b4f69826892/remoteapp-source-not-working-from-rdweb?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

  • TS1398 I did everything you are recommend to do and still cannot connect to the network. "Unable to join network" shows up even that is a university network working for other users - students and staff. I am very unhappy with my new iphone 5 :(

    I did everything recommended on apple store support site and still cannot connect to the network with my new iphone 5 but my co-workers and students (I work for the university) can keep connectivity all the time. I am very unhappy with my new phone

    Be patient, Apple is coming out with a update soon, its been reported that they have sent the update to the carriers to test, which means it will be soon. And is suppose to address this issue.

  • I keep getting the message "mail cannot connect to the server-." when it clearly can and does. How do I prevent these messages from appearing?

    See the title
    I keep getting the message "mail cannot connect to the server…." when it clearly can and does. How do I prevent these messages from appearing?
    help

    On your iPad or a Mac?
    You posted in the iMac community but your profile indicates an iPad 2.

  • My iPhone 4 won't connect to the apple store when I'm trying to 'update' apps. Any ideas?

    My iPhone 4 won't connect to the apple store when I'm trying to 'update' apps. Any ideas?,

    PUT THE CORRECT PASSWORD, OR ELSE YOU CAN UPDATE THROUGH ITUNES. GO TO APP SECTION ON YOUR ITUNES, CHECK FOR UPDATES, CLICK THE UPDATES OPTION, IT WILL GET DOWNLOADED, AND THEN SYNC.

  • TS1398 i have a good signal on my ipad wi fi but cannot connect to the network

    I have a good wi fi connection on my ipad but cannot connect to the network

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Cannot connect to the configuration database when App Server is down

    Hi, 
    We had a App Server not come up after a restart.
    When trying to access a site we get
    the "Cannot connect to the configuration database"
    We have now started the App Server and everything working again...
    My problem, there are 2 WFE servers with NLB Configured apart of the App Server ....Why wont the site work and why cant i connect to config DB?
    Something must be misconfigured? Sites should be connecting to the WFE servers and work if App server is down.
    Yes, NLB Points to the WFE Servers.
    Any ideas where i can look? This is a Project PWA Server, not sure if that will make a difference but the root SharePoint site had the same issue.
    Thanks

    Hi Danie,
    is it possible that the SQL Server is running on the same box as the SharePoint (application) server? This would be the only thing that can explain the symptoms. Please check following:
    IP address of the SharePoint Application server by typing nslookup AppServerName on the SharePoint WFE in Command Prompt (cmd.exe). Replace
    AppServerName with the FQDN of the application server, e.g. appserver.domain.local
    IP address of the SQL server by typing nslookup SQLServerName on the SharePoint WFE in Command Prompt (cmd.exe). Replace
    SQLServerName with the FQDN of the SQL server, e.g. sqlserver.domain.local
    SQL Server alias configuration by checking the entries in the cliconfg.exe on both SharePoint WFEs
    In most cases, SQL server has nothing to do with the SharePoint Application server role and it is stored on the separate box. My guess here is that the farm started as one-server farm setup and over the time got expanded by additional 2 WFEs, moving
    Web Server roles from the initial server, leaving it with the application role (service applications) and SQL server on the same box.
    But, I am just making an educated guess here. Can you provide some additional information?
    Hth,
    Aleks

  • Cannot connect to the OLAP source - when Scheduling WebI Report

    Hi,
    I am confused by seeing the above mentioned error on random days....
    Scenario - WebI report scheduled daily:
    Some days the report works fine and other days  it is not processing correctly but gives me this error message "Cannot connect to the OLAP source".
    Our connection is via BICS and it is SSO. Data Source is BW and we use BEX.
    Person who scheduled report has admin rights, our version is 4.0 SP7 P5.
    Please advise if anyone has faced this issue and if there is a solution, did try the community but only found that the key store was a problem but that was previous versions.
    Any help or input is much appreciated.
    Kind regards,
    Sarat.

    Hi Sarat,
    This problem can occur for multiple different reasons, so it's hard to give an advice for such symptom. Could you look at trace files from SemanticLayer component (it is hosted in APS with DSLBridge service), you should find clearer errors which can then be analyzed. There is no need to activate logs if it is still at level 'Unspecified', errors have level high enough to be output by default.
    Regards,
    Loic

  • "Cannot connect to the iTunes Store" when using WiFi and Cisco VPN

    hi
    I'm on iPhone software 2.0 and have a connection to the internet via WiFi and VPN (using the integrated Cisco client). Everything works fine (Safari, Mail, mobileme push of contacts and calendars) but the iTunes Store and the App Store won't. While the App Store keeps spinning the iTunes Store says "Cannot connect to the iTunes Store". Has anyone else experienced a similar phenomenon?
    thanks
    Message was edited by: samaki

    We're having the same issue. App Store and iTunes do not work when all traffic is tunneled over VPN. Yet, other applications like Safari, New York Times reader, Telnet, etc... work perfectly fine over VPN. If we have the iPhone switch over to using split tunneling VPN mode, then the App Store and iTunes work since they do not appear to be sending traffic over the VPN tunnel. I can say for certain that no outgoing traffic is being blocked on the VPN servers since I administer those servers. I also did a packet capture on the iPhone wireless session and it appears that the App Store sends traffic over the regular HTTP port. So it really doesn't make any sense from a VPN perspective why Safari would work but not the App Store or iTunes when you're tunneling all traffic over VPN. Our iPhones are using the latest firmware (5F136). If anyone has any update, please do share.

  • "Cannot connect to the iTunes Store" when updating apps

    This error confounds me ... in iTunes, I check for app updates. The update list populates. Usually asks me for my password first but updates. Then when I click to download all updates, I get this message
    "You have already purchased this item. You have already purchased this item but it has not been downloaded. To download it, select Check for Available Downloads from the Store menu" Done that no luck. Sometimes I can update the apps by checking for updates on my iPhone or iPad and they update, then disappear from the update list when I sync. But for apps I purchased but are currently not installed on a device, no luck.

    Just posted this reply to a similar question here.  Hope it helps:
    What worked for me was unplugging my router and then plugging it back in after a few seconds. It was one of the recommendations listed in the Apple troubleshooting forum:
    http://support.apple.com/kb/TS1368
    I've had my iPhone 4 for almost a year and just today I started getting that "Cannot connect to iTunes Store" message when I tried updating a few of my apps. I tried shutting off my phone, I verified that I had the latest iOS, and I toggled the on/off button in my wireless settings on the phone, but none of that worked. I didn't want to reset my phone or sync it to iTunes so I googled it and came across the link above. I didn't think that my router was the problem because my internet was working just fine on my iPhone and the signal strength was good. But as soon as I unplugged my router and plugged it back in, I tried updating my apps again and sure enough, as soon as I entered my password, the apps began updating immediately. Really weird. Maybe this will work for some of you.
    Another issue I've had is when I'm somewhere that doesn't have WiFi, it won't allow me to update or download apps that are over a certain size. Sometimes it'll give me the message that I need to connect to WiFi because the app is over certain MBs in size, and sometimes it won't say anything at all and it just won't download. But as soon as I connect to WiFi, it will.

  • VPN Connected Users cannot connect to the internet or send email

    I just upgraded to Xserve G5 Dual 2.3 GHz 2GB SDRAM and a 3.5 TB Xserve RAID Running OSX Server 10.4.7.
    Used to run G5 Tower running OSX Server 10.3.9.
    Running as a Standalone Server.
    Everything seems to be running smoothly other that the fact that users connecting through VPN can no longer connect to the internet while connected through VPN nor can they send email. (I assume it's the same issue).
    Wondering if password type is the issue. In 10.3.9 Workgroup Manager User password types were Open Directory for my vpn users. Previous Server was Standalone Server with Open Directory running, but not setup (weird I know.) 10.4.7, Open Directory for password is not an option... only shadowed password.
    Not running any Open Directory services other than Lookup Server: Running and NetInfo Server: Local Only.
    Any help is greatly appreciated.
    -Ed

    Unless otherwise informed, a connecting client will send ALL traffic via the vpn. Ideally you only want to route traffic applicable to the VPN and for any other traffic (browsing and external email) to go via your local 'normal' router. You can configure the VPN server to inform connecting clients about applicable VPN traffic...
    Example: the network you are vpn'ing into is 192.168.0.0/24
    In Client Information-> Network Routing Definition, add 2 routes:
    Address: 192.168.0.0
    Mask: 255.255.255.0
    Type: Private
    Address: 0.0.0.0
    Mask: 0.0.0.0
    Type: Public
    A connecting client will incorporate this routing information when connecting and thereafter send all traffic for the 192 network through the VPN (private) but send all other traffic (the catchall 0.0.0.0) to their local default router (public). Make sure you have them in that order (catchall at bottom).
    -david

  • Cannot connect to the network after fresh install

    Hello everyone. So I followed the Beginner's Guide to the letter during setup. Everything was all peachy, including the network (since I used the FTP/HTTP ISO to install Arch Linux). My NIC got assigned an IP address from my router via DHCP. However, after the installation process was finished and I booted to the actual system, it seems that I cannot get an IP address from the router at all. When I try to run dhcpcd eth0, it always times out.
    There have been a couple of posts about this in the past month, and I tried all the solutions that were mentioned there. None of them worked. I double-checked my /etc/rc.conf, /etc/dhcpcd.conf, and /etc/hosts files. They are correct as far as I can tell. No typos or anything like that. Heck, I even tried increasing dhcpcd's timeout to a full minute. Still no dice. This post seems to suggest that dhcpcd has a regression bug.
    So... does anyone have any suggestions as to the next course of action I should take? I would appreciate any help.
    EDIT: For what it's worth, I'm trying to install Arch Linux on a Dell Inspiron 9300 laptop. I'm not too sure about the exact model for the built-in NIC, but I suspect it is one of those built-in NICs from Intel.
    Last edited by Kirby54925 (2009-08-08 12:50:43)

    No, I have not even installed any DE/WMs yet (how can I if the network doesn't even work?). Hell, X.org is not even set up yet. Keep in mind that my problem takes place IMMEDIATELY after I finished running the FTP/HTTP installer (so in the Beginner's Guide, I would be right at the beginning of Part II, which is configuring the new Arch system). The kernel version is 2.6.30.4. The ethernet card is a Broadcom 440x 10/100, I believe. I don't believe a driver is needed for that card due to kernel support (this card does indeed work with Ubuntu as well as the Arch livecd itself). And yes, I did read the relevant wikis, including the Beginner's Guide and the Network wiki.
    So to summarize, the network does indeed work while I'm going through the initial stages of installation with the Arch livecd. Since I am using the FTP/HTTP installation CD, I have to download all of the packages I need for installing the base system. It is after that point when the base system is fully installed, allowing me to boot off the hard drive, when the network fails to get an IP address from the router.
    Anyhow, thank you very much for the welcome and for your response! Hopefully we will be able to get to the bottom of this problem.
    EDIT: This person and this other person seem to have the same problem I do. They, unfortunately, did not come up with a sufficient resolution to the problem. I hope this helps in making the issue clear.
    Last edited by Kirby54925 (2009-08-08 18:29:39)

  • My Wi-Fi home network works, but the iPhone cannot connect to the network?

    Let me clarify. I have a wifi home network that my laptop connects to and now also my iPhone. They both connect to it just fine and the internet works and everything. I just tried to setup the Remote app but my iPhone won't show up under Devices in iTunes. I know this is a problem with my network because I also tried setting up Home Sharing between my laptop and desktop computer but that won't work either. It's almost as if they're not on the same network because it can't seem to realize other devices are connected, but they are all connected to the same wifi network. My laptop is running windows 7. I have no idea what to do. Can you help please? Thanks!

    Try the solution that worked for me at the end of this thread
    http://discussions.apple.com/thread.jspa?threadID=2564699&tstart=0&start=60

  • Macbook Pro cannot connect to the internet even when others can

    Hi! Please help me. We have an internet WIFI connection in our office but only my MacBook Pro cannot connect even when I entered the correct password. My Iphone and Ipad work just fine. It says "connection timeout" but all other laptops can connect. I tried network diagnostics already and it always say "connection timeout". I dont know what to do anymore.

    Yes, and when I open the Network Utility it shows a working IP address, and a 54Mb/s speed from the wireless router. It even shows the shared computers from my roomates. But when I try to access the internet it does not load anything on Safari or Firefox ( or any other internet application for that matter). It is completely unconnected. YET, As soon as I activate the AirPort card on the top right where I have my signal strength, it shows on the Network Utility information that there are 'packages' being sent and received, and I have NO programs open what so ever, I have closed everything except finder and network utility... Does this mean I am being hacked, or have some sort of Trojan or something in my computer? I ran an antivirus that my school provided, called Virex by McAfee, it came out clean except it says it cannot read one file.
    I tried repairing my disk, and that did not work either. I did the Ram reset like you suggested, but that also did not work. I doubt it being a hardware error. I am going to try to connect it to an ethernet cable to see if that will work. Then I will let you know what happens with that, but that would still not be a solution since I need it wireless, cause the router is in another part of the house.
    Thank you for your help, and I hope we can get this sorted out.

  • ADSL Disconnects when my mac connects to the network or when ever it wants

    Hi there.
    My MacBook Pro Loves to pull fits on the Network.
    What it dose is when i open the lid on my laptop it disconnects the internet. So the ADSL Light Turns off on the router.
    Whats wrong with it?

    Other people on the network have no issues with bit torrent
    Yes but they may be using all the routers resources.
    If you have multiple devices on the network the router may just be crashing. I have seen this before with thompson routers. I have seen Thompson 780wl crash with more than 3 devices connected to it. When used with 1 device it was fine.
    Dlink in my experience are buggy at the best of times. I would suggest you flash your router with the latest firmware you can download from dlink.
    I would suggest as william indicated replacing your router with a more efficient one.

  • Outlook strange behavior with error 0x800CCC13 Cannot connect to the network. Verify your network connection or modem

    Hi guys,
    I am having a strange behavior in my environment. We are running Exchange 2010 with Outlook 2007 for client access. Some of these clients needs to access some pop3 accounts from diferent vendors.
    About 2 weeks ago, we start getting error Ox800CCC13 (as described above) when users try to send email through their pop3 accounts in Outlook. This only happens to about 5 out of 100 users. I have removed the pop3 account and readded it. I was able to send
    just one email out then issue was back.
    Next, I tried sending out simple text message with no attachment. No luck. However, I noticed when I remove the signature (10 kb gif image) I was able to send out a few emails. However, issue is back with or without signature.
    For more testing, I added Mozilla Thunderbird client for the pop3 account with no exchange account and so far no error. Emails are sending out fine. I would appreciate any insight please.

    Hi, 
    This problem may occur if the Outlook 2007 client computer does not have a default gateway configured. 
    For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.To
    add this DWORD value yourself, follow these steps.
    Outlook 2007
    1.      
     Click Start, click Run, type regedit in the Open box, and then click OK.
    2.      
     Locate and then click the following subkey:
    HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\RPC
    3.      
     On the Edit menu, point to New, and then click DWORD Value.
    4.      
     Type DefConnectOpts, and then press ENTER.
    5.      
     Right-click DefConnectOpts, and then click Modify.
    6.      
     In the Value data box, type 0, and then click OK.
    7.      
     Exit Registry Editor.
    Sincerely
    Harry

Maybe you are looking for