Cannot connect using Wireless WRT54G

I use windows vista and I can connect using an ethernet cable. But whenever I try to connect using wireless, it says "the settings saved on this computer for the network do not match the requirements of the network" How can I fix this?

The wireless settings on your Vista computer must match the ones on your router.
Greetings from Northern Ontario, Canada

Similar Messages

  • Questions: cannot connect via wireless laptop (router WR...

    Questions:
    cannot connect via wireless laptop (router WRK54G)
    cannot secure my network using WEP

    from the wired computer , access the router using http://192.168.1.1 . the default password is admin
    on the router ui , click on the "wireless" tab , change the ssid - any non-linksys name , channel - 11 , ssid broadcast - enabled
    go to the "wireless security" subtab .. change the security mode to WEP - 64 bits , default transmit key - 1 , enter a 10 digit hexadecimal number in the WEP key 1 field , passphrase - empty
    under the "advanced wireless settings" , change the beacon interval - 50 , Fragmentation threshold - 2304 , RTS threshold - 2307

  • HT201320 when trying to set up my email account, i enter add account tap in my details for my virgin media email account, after going through the veryfying, it comes back with cannot connect using ssl.

    when trying to set up my personal email account, following the on screen instructions, it comes back with CANNOT CONNECT USING SSL, do you want to try setting up the account without ssl? Yes or No

    Since Thunderbird does not run on iPads, what does this have to do with Thunderbird?

  • When I try to set up my Optimum account email I get a message saying Cannot Connect Using SSL.

    When I try to set up my Optimum email account I get an error message saying Cannot Connect Using SSL. 

    What mail provider is it?
    Have you Googled for: setup XXX email on iPhone
    where xxx is the provider
    You can try going to Mail>the accounts>Advanced and turn Use SSL on or off, the opposite of what it is now.

  • Cannot connect using FaceTime on my IMAC with an iPhone 5

    Cannot connect using FaceTime on my IMAC with an iPhone 5.

    sry, but you posted this in the wrong forum
    this is the PowerPC forum, which is for machines built before about 2001.
    post it in the INTEL forum

  • Im trying to set up email on my iphone4 and it is saying "cannot connect using SSL" what does this mean?? what am i doing wrong because i cannot set up email??

    how do i set up email on my iphone??? it says "cannot connect using ssl" whats this mean, i cant recieve or send emails coz of this

    Try just choosing yes when it says that.  And yes if you get it a second time.  Lots of mail providers don't use SSL.

  • HT201320 CANNOT CONNECT USING SLL

    I have a new Ipad 3rd generation, and I cannot setup my verizon email account on ADD ACCOUNT, does anyone know how to proceed? I am receiving the message "cannot connect using SSL" - My ipad is connected to AT&T for wifi service.
    Thanks,
    It's just Ducky2U

    Gmail accounts can be set up as either IMAP or POP. Each refers to the email protocol. POP is the older of the two and is typically a simple mail delivery with minimal interaction with the server. It pretty much sends the email to your client device and accepts outgoing for delivery processing. IMAP includes a synchronized folder structure and usually an email tagging/classification setup to allow for for flexible management of the the account through the client device. That's a bit of a simplistic description, but should give you an idea.
    For anyone using the same account on multiple devices, IMAP is generally the preferred type.

  • Cannot connect using webserviceclient+ssl.jar

    Hello!
    I installed Verisign test certificate on my server and I am able to connect
    to the server using Web Service client with JSSE adapter class. Funnily
    enough, I cannot connect using WebLogic SSL library, I get an exception.
    Could someone help me understand, why I cannot connect using WebLogic SSL
    implementation?
    To connect using JSSE I use following system properties:
    java^
    -classpath
    .;abcconnect-client.jar;webserviceclient.jar;..\lib\jcert.jar;..\lib\jnet.ja
    r;..\lib\jsse.jar;^
    -Dweblogic.webservice.client.ssl.adapterclass=com.xxx.yyy.webservice.ssl.AB
    CJSSEAdapter^
    -Djavax.net.ssl.trustStore=abc.keystore^
    -Djava.protocol.handler.pkgs=com.sun.net.ssl.internal.www.protocol^
    Client https://MyServer:7002/webservice/ABCConnectService?WSDL
    where abcconnect-client.jar is the client jar file, and abc.keystore
    contains getcacert.cer root CA, which I downloaded from Verisign from this
    page: https://digitalid.verisign.com/server/trial/trialStep4.htm,
    ABCJSSEAdapter is the adapter class, implementing SSLAdapter. JSSE test
    works fine.
    To connect using WebLogic SSL implementation I use following system
    properties:
    java^
    -classpath .;abcconnect-client.jar;webserviceclient+ssl.jar;^
    -Dweblogic.webservice.client.ssl.trustedcertfile=getcacert.cer^
    -Dweblogic.webservice.client.ssl.strictcertchecking=false^
    -Dweblogic.webservice.security.verbose=true^
    -Dweblogic.webservice.client.verbose=true^
    -Dbea.home=.^
    -Djava.protocol.handler.pkgs=com.certicom.net.ssl^
    Client https://MyServer:7002/webservice/ABCConnectService?WSDL
    I converted binary format of the certificate to PEM, but it did not help.
    I am getting this exception:
    [BaseWLSSLAdapter] : SSLAdapter verbose output enabled
    [BaseWLSSLAdapter] : Strict cert checking disabled by default
    [BaseWLSSLAdapter] : Trusted certificates will be loaded from getcacert.cer
    [BaseWLSSLAdapter] : Loaded local trusted certificates from
    java.io.FileInputStream@73a7ab
    [BaseWLSSLAdapter] : Disabling strict checking on adapter
    weblogic.webservice.client.WLSSLAdapter@4faf8
    [BaseWLSSLAdapter] : Set TrustManager to
    weblogic.webservice.client.BaseWLSSLAdapter$NullTrustManager@78c6df
    [WLSSLAdapter] : Set HostnameVerifier to
    weblogic.webservice.client.WLSSLAdapter$NullVerifier@4ac00c
    [BaseWLSSLAdapter] : Loaded local trusted certificates from
    java.io.FileInputStream@57c2bd
    [BaseWLSSLAdapter] : Disabling strict checking on adapter
    weblogic.webservice.client.WLSSLAdapter@323210
    [BaseWLSSLAdapter] : Set TrustManager to
    weblogic.webservice.client.BaseWLSSLAdapter$NullTrustManager@74f44a
    [WLSSLAdapter] : Set HostnameVerifier to
    weblogic.webservice.client.WLSSLAdapter$NullVerifier@4ac00c
    [BaseWLSSLAdapter] : Got new socketfactory
    javax.net.ssl.impl.SSLSocketFactoryImpl@18c56d
    [WLSSLAdapter] :
    openConnection(https://MyServer:7002/webservice/ABCConnectService?WSDL)
    returning
    weblogic.webservice.client.https.HttpsURLConnection:https://MyServer:7002/we
    bservice/ABCConnectService?WSDL
    [WLSSLAdapter] : -- using HostnameVerifier
    weblogic.webservice.client.WLSSLAdapter$NullVerifier@4ac00c
    [WLSSLAdapter] : -- loaded certs from getcacert.cer
    java.io.IOException: Write Channel Closed, possible SSL handshaking or trust
    failure
    at com.certicom.tls.record.WriteHandler.write(Unknown Source)
    at
    com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireAlertSent(Unknown
    Source)
    at
    com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
    at
    com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
    at
    com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Un
    known Source)
    at
    com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(U
    nknown Source)
    at com.certicom.tls.record.ReadHandler.interpretContent(Unknown
    Source)
    at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
    at
    com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown
    Source)
    at
    com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown
    Source)
    at com.certicom.tls.record.WriteHandler.write(Unknown Source)
    at com.certicom.net.ssl.HttpsClient.doHandshake(Unknown Source)
    at
    com.certicom.net.ssl.internal.HttpURLConnection.getInputStream(Unknown
    Source)
    at
    weblogic.webservice.client.https.HttpsURLConnection.getInputStream(HttpsURLC
    onnection.java:216)
    at
    weblogic.webservice.tools.wsdlp.DefinitionFactory.createDefinition(Definitio
    nFactory.java:71)
    at
    weblogic.webservice.tools.wsdlp.WSDLParser.<init>(WSDLParser.java:62)
    at
    weblogic.webservice.WebServiceFactory.createFromWSDL(WebServiceFactory.java:
    106)
    at
    weblogic.webservice.WebServiceFactory.createFromWSDL(WebServiceFactory.java:
    82)
    at
    weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:67)
    at Client.main(Client.java:136)

    Michael,
    I guess the getcacert.cer, which is on the client side, should have the
    server's certificate followed by the root CA certificate in .pem format.
    I have it working with this format.
    Could you please try this out and let us know.
    Regards,
    Anurag
    "Michael Jouravlev" <[email protected]> wrote in message
    news:[email protected]...
    Hello!
    I installed Verisign test certificate on my server and I am able toconnect
    to the server using Web Service client with JSSE adapter class. Funnily
    enough, I cannot connect using WebLogic SSL library, I get an exception.
    Could someone help me understand, why I cannot connect using WebLogic SSL
    implementation?
    To connect using JSSE I use following system properties:
    java^
    -classpath
    .;abcconnect-client.jar;webserviceclient.jar;..\lib\jcert.jar;..\lib\jnet.ja
    r;..\lib\jsse.jar;^
    -Dweblogic.webservice.client.ssl.adapterclass=com.xxx.yyy.webservice.ssl.AB
    CJSSEAdapter^
    -Djavax.net.ssl.trustStore=abc.keystore^
    -Djava.protocol.handler.pkgs=com.sun.net.ssl.internal.www.protocol^
    Client https://MyServer:7002/webservice/ABCConnectService?WSDL
    where abcconnect-client.jar is the client jar file, and abc.keystore
    contains getcacert.cer root CA, which I downloaded from Verisign from this
    page: https://digitalid.verisign.com/server/trial/trialStep4.htm,
    ABCJSSEAdapter is the adapter class, implementing SSLAdapter. JSSE test
    works fine.
    To connect using WebLogic SSL implementation I use following system
    properties:
    java^
    -classpath .;abcconnect-client.jar;webserviceclient+ssl.jar;^
    -Dweblogic.webservice.client.ssl.trustedcertfile=getcacert.cer^
    -Dweblogic.webservice.client.ssl.strictcertchecking=false^
    -Dweblogic.webservice.security.verbose=true^
    -Dweblogic.webservice.client.verbose=true^
    -Dbea.home=.^
    -Djava.protocol.handler.pkgs=com.certicom.net.ssl^
    Client https://MyServer:7002/webservice/ABCConnectService?WSDL
    I converted binary format of the certificate to PEM, but it did not help.
    I am getting this exception:
    [BaseWLSSLAdapter] : SSLAdapter verbose output enabled
    [BaseWLSSLAdapter] : Strict cert checking disabled by default
    [BaseWLSSLAdapter] : Trusted certificates will be loaded fromgetcacert.cer
    [BaseWLSSLAdapter] : Loaded local trusted certificates from
    java.io.FileInputStream@73a7ab
    [BaseWLSSLAdapter] : Disabling strict checking on adapter
    weblogic.webservice.client.WLSSLAdapter@4faf8
    [BaseWLSSLAdapter] : Set TrustManager to
    weblogic.webservice.client.BaseWLSSLAdapter$NullTrustManager@78c6df
    [WLSSLAdapter] : Set HostnameVerifier to
    weblogic.webservice.client.WLSSLAdapter$NullVerifier@4ac00c
    [BaseWLSSLAdapter] : Loaded local trusted certificates from
    java.io.FileInputStream@57c2bd
    [BaseWLSSLAdapter] : Disabling strict checking on adapter
    weblogic.webservice.client.WLSSLAdapter@323210
    [BaseWLSSLAdapter] : Set TrustManager to
    weblogic.webservice.client.BaseWLSSLAdapter$NullTrustManager@74f44a
    [WLSSLAdapter] : Set HostnameVerifier to
    weblogic.webservice.client.WLSSLAdapter$NullVerifier@4ac00c
    [BaseWLSSLAdapter] : Got new socketfactory
    javax.net.ssl.impl.SSLSocketFactoryImpl@18c56d
    [WLSSLAdapter] :
    openConnection(https://MyServer:7002/webservice/ABCConnectService?WSDL)
    returning
    weblogic.webservice.client.https.HttpsURLConnection:https://MyServer:7002/we
    bservice/ABCConnectService?WSDL
    [WLSSLAdapter] : -- using HostnameVerifier
    weblogic.webservice.client.WLSSLAdapter$NullVerifier@4ac00c
    [WLSSLAdapter] : -- loaded certs from getcacert.cer
    java.io.IOException: Write Channel Closed, possible SSL handshaking ortrust
    failure
    at com.certicom.tls.record.WriteHandler.write(Unknown Source)
    at
    com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireAlertSent(Unknown
    Source)
    at
    com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
    at
    com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(UnknownSource)
    at
    com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Un
    known Source)
    at
    com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(U
    nknown Source)
    at com.certicom.tls.record.ReadHandler.interpretContent(Unknown
    Source)
    at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
    at
    com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown
    Source)
    at
    com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown
    Source)
    at com.certicom.tls.record.WriteHandler.write(Unknown Source)
    at com.certicom.net.ssl.HttpsClient.doHandshake(Unknown Source)
    at
    com.certicom.net.ssl.internal.HttpURLConnection.getInputStream(Unknown
    Source)
    at
    weblogic.webservice.client.https.HttpsURLConnection.getInputStream(HttpsURLC
    onnection.java:216)
    at
    weblogic.webservice.tools.wsdlp.DefinitionFactory.createDefinition(Definitio
    nFactory.java:71)
    at
    weblogic.webservice.tools.wsdlp.WSDLParser.<init>(WSDLParser.java:62)
    at
    weblogic.webservice.WebServiceFactory.createFromWSDL(WebServiceFactory.java:
    106)
    at
    weblogic.webservice.WebServiceFactory.createFromWSDL(WebServiceFactory.java:
    82)
    at
    weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:67)
    at Client.main(Client.java:136)

  • Clients cannot connect using afp running lion 10.7.1, worked ok before upgrade from 10.7 to 10.7.1

    I am running a macminiserver on ahome newtwork.  Original running snow leopard and then upgraded to 10.7 lion on all machine and everything was working fine.  Clients coul connected to shared drives on the server using afp.  However, after upgrading to 10.7.1 on the server and client machines, they can no lnger connect to the drives using afp, however you can connect using smb.
    I ahve tried stopping and starting the afp server, rebuilding permissions on the server - still cannot connect using afp.
    Any ideas?

    Be sure the correct Lion afp port is open on your router, even if you are using an Airport (port 548 tcp). Just do a search on "Mac OS X Lion ports".
    Also, if this is outside of the network, use the full server name in the Finder's Connect to Server, afp://server.com; when it prompts for a username, enter your first name and last name (not your short name) and then you also need to enter your password. If you don't have a fqdn, then you can use the static ip for "server.com"
    It should work, working for me inside and outside of the network. Admittedly, I don't think you need the port on the router for internal use, but you can test both ways.
    When working outside of the network a vpn is not required.

  • New gmail account on iPhone cannot connect using SSL

    Hi,
    I was having problems accessing the gmail server on my iphone so i deleted the account settings on the iphone and am creating a new one. However, the iphone tells me that it cannot connect using SSL. Has anyone had a similar problem? I don't want to setup the account without this basic security.

    Hey milos321,
    I'm not sure what caused the issue. I believe account may have been automatically locked because abnormal activity.
    You can find more detailed information here:
    http://mail.google.com/support/bin/answer.py?answer=61805
    http://mail.google.com/support/
    Jason

  • HT201320 I m trying to add my gmail acoount to mail app but when i click on next button it is showing following message, cannot connect using ssl, what to do???

    I m trying to add my gmail acoount to mail app but when i click on next button it is showing following message, cannot connect using ssl, what to do???

    Some of the following may help:
    How to enable imap: https://support.google.com/mail/troubleshooter/1668960?rd=1
    For your username, did you enter the full name including "@gmail.com"
    Do you have gMail 2-step verification turned on? If so, you need to use an application-specifc password instead of your normal password if using a mail app: https://support.google.com/mail/answer/1173270?hl=en

  • I have done the step 1 to 3,but still cannot connect the wireless network?

    i have done the step 1 to 3,but still cannot connect the wireless network?

    Step 1 to 3 of what? Can you elaborate on the issue?

  • HT201320 having problems setting up email for a tiscali email address - after trying to verify ipda comes up saying cannot connect using SSL

    trying to set up my tiscali email address on an ipad mini, after trying to verify, message comes up stating "cannot connect using SSL"

    Not sure what the shortcut is. I'm just going, Settings > Mail > Add Account > Gmail
    That is the GMail shortcut. That should work. Just for testing, use the "Other" shortcut.
    Settings / Mail / Add Account / Other
    Name: <put your name>
    Email [email protected]
    Incoming server: pop.gmail.com
    Login: [email protected]
    Password: yourpassword
    Outgoing server: smtp.gmail.com
    Login: [email protected]
    Password: yourpassword
    Hit SAVE.
    It should set itself up correctly without you having to specify anything else. Try that.

  • Laserjet pro 100 cannot connect to wireless

    Hi There,
    I cannot connect my printer HP laserjet 100 color mfp m175nw to the wireless. It is connect to the router and it install on the computer with the Usb cable but not with the wireless connection. 
    How can I fix this? 
    Before it used to work perfect I could even print from my phone, now unless I connect my computer to the printer with cable it will not work because I cannot install the printer working with the wireless connection.
    Please help  
    This question was solved.
    View Solution.

    Thanks for letting us know, glad you got it fixed
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • Cannot connect to wireless network from a new HP Officejet Pro 6830

    Just purchased a HP Officejet Pro 6830 wireless printer.
    Set it up connecting my Dell PC and it initially worked.
    THEN something happened.
    ICON on screen on printer indicates "NO WIRELESS NETWORK FOUND"
    Tried rebooting the Cable modem, then the router, then the printer and then the PC.
    Still did not work.
    What should I do?
    Thank you for any help.

    Hi @I-Love-HP-Gear,
    Welcome to the HP Forums!
    I noticed that you cannot connect to the wireless network from a new HP Officejet pro  6830, I am sorry to hear this, but I am happy to help you with your connection issues!
    Are you able to make copies with the printer? Copy Text or Mixed Documents.
    What Operating System are you using? Windows or Mac? If you do not know the Operating System you are using, please visit this website. Whatsmyos.
    In the meantime, please see the following:
    This general printing guide, Print Jobs from Your HP Printer are Stuck in the Print Queue.
    This wireless guide for maintaining the connection. Printer Does Not Maintain Wireless Connection.
    The HP Wireless Printing Center for more information. HP Wireless Printing Center.
    Hope this information helps, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Maybe you are looking for