Cannot d/load Keynote

Hi,
I cannot install Keynote after downloaded. Error message "An eligible keynote application was not found in the location /applications/keynote.app"
What is the remedy?
Cheers....Max

... he probably downloaded it illegally or it is an update
My guess is he downloaded an updater, which would be useless without the base program.

Similar Messages

HT201364 Hi I have just bought a new Mac Book Pro 15" Retina display with 256 SSD and 8G RAM. I had my info transferred form my Previous Mac Book Pro late 2011 to this machine. When trying to download Mavericks it says it cannot be loaded onto this machin

Hi I have just bought a new Mac Book Pro 15" Retina display with 256 SSD and 8G RAM. I had my info transferred form my Previous Mac Book Pro late 2011 to this machine. When trying to download Mavericks it says it cannot be loaded onto this machine? Strange as I have just downloaded Pages, Numbers and Keynote...free? Thanks and Regards
Brian

Welcome to Apple Support Communities
You already have got OS X Mavericks installed (the Keynote, Pages and Numbers versions available in the Mac App Store are only compatible with OS X Mavericks).
You have got a Late 2013 MacBook Pro, which uses a special OS X Mavericks version that is not available in the Mac App Store. This is the reason why the Mac App Store is not compatible with OS X Mavericks even if you are using it. This will be fixed in OS X 10.9.1, when your Mac uses the same Mavericks version as all other Macs.
Until then, you can reinstall OS X through OS X Recovery > http://support.apple.com/kb/HT4718

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Firefox does not opens. It shows an alert message -"Your Firefox profile cannot be loaded. It may be missing or inaccessible."

Firefox window does not opens. It shows an alert message -"Your Firefox profile cannot be loaded. It may be missing or inaccessible." I have deleted the processes in task manager and restarted Mozilla.Even then it does not opens. Pls get me a solution.

Make a new profile ('[[managing profiles]]'); if the old profile directory is still there, just copy-and-paste its contents into the new profile directory.

Why do i keep getting an Alert message saying "The URL is not valid and cannot be loaded "?

Why do i keep getting an Alert message saying "The URL is not valid and cannot be loaded "?
This happens a lot regardless of the web page. I continually have to restart FF and it persists still

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

When I plug in my iPod and it syncs it says that a bunch of my apps cannot be loaded because my iPod does not have the latest software to support them, but I have done all of the iPod software updates and the same apps were working fine just weeks ago...?

I plug in my iPod to charge from my computer and it syncs with my iTunes, but I've been getting a message that a list of 13 of my apps cannot be loaded onto my iPod because it doesn't have the latest software to support them. I have done all the software updates for my iPod and iTunes says it is completed up-to-date. Do I need to delete the apps and redownload them or what?
Any help is appreciated! Thanks.

ok well like lllaass said, most apps require 4.3 or later iOS software. chances are since the apps worked before, the apps themselves got updated and will no longer work with your software version.

Server 2008R2 - Windows cannot log you on because your profile cannot be loaded

Hi guys.
I have a server SEXXX01 - Windows 2008 R2 OS.
Im having major issues to login to this server.
This was reveled when a person tried to login to the server and got the error "Cannot log you in, unable to load profile"
What we did was to remove the account, completly, we did this manually aswell(not very smart I know).
We also removed the registy profile.
But. Now no new accounts can be made to login. The old "local accounts" can still login, but no new ones.
You cant even create a new user in AD, add that user to the server. It still gives the same error.
I have an admin account that still is avaible to login. But no other accounts are able to.
When I create a new account, no folders are created, no register path is created.
The weird part is that I created a temp-admin account on the server and it worked for a little while yesterday, out of the blue(no changed were made). But now its back to not working again
This is what I have done so far:
I have checked the register for S-I-D numbers that might be faulty, but there are none for the new accounts that are made or for the original account that failed.
Tried to add new accounts as administrators, still the same problem.
checked if there is a problem with the "default user" folders, none at all.
Added, removed, changed the rights for the accounts.
Looked at the local GPO, nothing weird
This is the error msgs I get from the event viewer:
event ID: 1500
Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - The system cannot find the file specified.
Event ID: 1500
Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - System could not allocate the required space in a registry log.
Event ID: 1500
Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - Insufficient system resources exist to complete the requested service.
Event ID: 1508
Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.
DETAIL - Insufficient system resources exist to complete the requested service.
for C:\Users\XXXXX\ntuser.dat
The errors with the system resources seems weird. The server has 16GB of ram and not even 30% is used at this time.
So what could it be?
Why doesnt the server created user folders/registery files for new users?
Why does it give error about resources allocation, when it has more then enough?
Im just at the dead end. I have no idea how to proceed.
All help is very appriciated.
Regards
Me

See if any of the suggestions discussed in similar thread helps
http://answers.microsoft.com/en-us/windows/forum/windows_7-security/error-windows-cannot-log-you-on-because-your/e30ad127-d9fd-48b1-b1e9-f2b60b01167f
I have unmarked your previous post as an answer since issue still persists.
Regards, Santosh
I do not represent the organisation I work for, all the opinions expressed here are my own.
This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.

Date/time icon and other movable icons on menu bar cannot be loaded on startup,but it works if manually loaded

Strange things happened since my mbp 13' (MD-101) was upgraded to 10.8.4 ----------- time icon, battery icon,and language icon (these icons can be moved when held Command key and drag) cannot be loaded on startup, but they still can be loaded when you get into System Preferences and manually turn them on, as well as iStat Menus
However, some other icons didn't bother, things like BetterTouchTool, NewsBar. They are immovable!! I guess it is the key factor that the icon is movable or not making the difference.
Someone please lend me a helping hand?
I've attached some pictures in order to make my situation easier to be understood.
these icons can't be loaded on my loggin in.
but they can be loaded manually
however, these icons will be loaded on startup
I've almost despaired to resolve it . Thanks for your help!

I have a similar issue. When the computer goes into "Hibernate" mode -- that is, it loses power while sleeping and it writes the contents of it's memory to disk in order to boot into that exact configuration when woken up -- many of my icons when Apple-Tab'ing to another application appear as static. They look like a slightly colorized version of the "static snow" you see when tuning into a station that doesn't exist on a UHF antenna television. Also, icons in Chrome such as web sites "favorite icons" or favicon.ico (the icons that appear in the URL bar and bookmarks) will be scrambled in the same fashion , at first , until the actual icon is loaded.
Between this, my menu bar and finder icons not displaying, and being unable to boot into safe mode, I'm getting quite ******. I have no idea what the **** is going on with my Macbook Pro. The issue of the scrambled icons actually existed prior to installing an SSD and doing a fresh install of Mountain Lion. I may end up throwing in the towl and re-installing the operating system but I'm sure SOMETHING will happen. It seems the latest update, 10.8.2, is absolute garbage.
What the ****, Apple? And I really don't want to take the computer to the morons at the Apple Store. They are not "geniuses" by any measure.

My iPhone 4S has stopped receiving iMessages, cannot send/load any pictures over whatsapp, cannot join the wifi in my house anymore. What has happened to my iPhone i haven't made any changes?

My iPhone 4S has stopped receiving/sending iMessages, cannot send/load any pictures over whatsapp and cannot join the wifi in my house anymore.
Essentially all the things I use my phone for have now stopped working. I constantly have 3G connected (even though i dont want to use it, i want to connect to the wifi in my house) but still when I try to download/ send a picture over whatsapp it comes up with an error message saying the server is unverified, or something equally ridiculous.
I deleted the app so i could reinstall it (as if that would help), but the app store is started saying "unable to connect", despite 3G, so that bright idea died out pretty sharpish.
Whenever i try to turn on iMessage, it asks for my Apple ID password, which I know I've typed in correctly because I reset the **** thing about 4 times due to it apparently being "incorrect". Even so, it repeatedly asks for the password over and over as soon as I've entered it, saying it was "unable to connect" before a final "incorrect password" message pops up just to add an extra smack of annoyance.
I haven't changed a single setting on my iPhone whatsoever. It just suddenly started spiralling into what is now £28/month-worth of pure frustration.
I don't even have any music or photos on it as I had to free up 3.5GB of space on the **** thing to allow it to update, naively thinking that would solve the problem, but alas it did not.
I have seen a few questions posted like this one, usually just one of the problems I have, but I seem to have rounded up the whole bunch (lucky me). None of the previously posted questions have received any replies.
Can some please help me! Honestly, if i see another "unable to..." or "unverified source" pop up again I'll probably smash the thing against the side of my house.
Cheers.

On your iPad, go to [Settings > General > Reset > Reset Network Settings] Once that is done, re-connect your iPad to your wifi network.

The URL is not valid and cannot be loaded

seems like maybe firefox mishandles untrusted certificates?
It gives error: Alert The URL is not valid and cannot be loaded.
example:
https://notes.corp.cat.com/
other browsers can load this URL just fine. When I visit it in Firefox, I get the error in a simple little message box with a yellow triangle exclamation point, titled "Alert".
ALSO.... when I click the "Home" button in firefox, I get the error, and the home page does not load. Currently the home page is set to "Mozilla Firefox Start Page."
changing the home page to: http://www.google.com/ allows the home page button to work normally.
restoring the home page to default brings the error behavior back when clicking the home button.
changing the home page to: https://notes.corp.cat.com/ produces the same error, just like when I manually type in an https URL with a funky security certificate.
This problem only seems to happen on secure URLs with untrusted certificates, i.e. sites that are too cheap to pay to have their certificate registered with one of the certificate vendors or however the hell that works, so as a result every time you visit their web site, your browser starts to whine that it might be a forgery or whatever.
It used to be in Firefox that I could load these pages and just specify that I want to trust the site anyway. Now firefox gives this error that doesn't allow the user to know what is really going on or what the reason for the error is. It is as if the developers decided that users are too stupid to decide if they really want to visit the site or not, so as a result Firefox is just refusing to visit any web sites where the authenticity of the certificate can't be verified? Hey, it's not a bad idea, to be honest. :-) But it's kind of annoying, because here I am, sort of smart enough to know what I'm doing, but I don't have the choice in the matter...
I restarted with all add-ons disabled and that didn't help. I don't have much installled in the way of add-ons anyway. All I have is JAVA quick starter 1.0, and Adobe Acrobat, Java development toolkit, Java platform SE, Microsoft DRM, and Windows Media Player Plug-in Dynamic Link Library. Not even Flash. All the above is disabled now that I rebooted with add-ons disabled, and I still have the issue.
thanks for any help you can provide.

Please [https://bugzilla.mozilla.org/show_bug.cgi?id=713167 see this.] Installing [https://www.microsoft.com/download/en/details.aspx?id=5638 Visual C++ 2005 SP1] or the .Net Framework 3.5 SP1 may help mitigate the issue.

"project cannot be loaded it may be damanged..."

I am using Premiere CS6 on a Macbook Pro and am in the middle of editing a huge project. I went to open the project today and got this error.
"the project cannot be loaded it may be damaged or contain outdated elements"
I have no idea how or why this is happened.
PLEASE HELP!
What I have tried:
1. Starting a new project and importing the entire project. I get the same error message.
2. Starting a new project and importing just the sequences. Premiere just stalls.
3. Cleaning the Media Cache.
4. Uninstalling then re-installing Premiere.
5. Importing the project into After Effects. I get an error message.
6. The auto-save files open, but the latest one is quite old.
7. Duplicating the project file.
8. Moving the project file and file structure to a new directory.
None of these have worked!
Any other ideas?

Same problem here. It's happened twice in the last few weeks. I tried all the same things as you did, except re-installing. I also tried to repair the file with xml wrench, but it didn't help. The first time I lost about 6 hours work - ouch.
What seems odd to me is the lack of current auto-saves. Could there be some connection?
I'm on Windows. The problems occurred only after the latest update. The only difference I can see compared to other projects is the size. This project is about 50MB, due to some warp stabilization.
What complicates things is an error message from the BIOS when I started the computer each time the error happened. "overclocking failed" This apparently is a generic ASUS error message, and I think it might not be related to this, as it has occurred other times, even when there is no overclocking. Maybe coincidental.
Win 7 - i7-930 - nvidea 470 - 24GB memory - t

SSRS 2005 report: Cannot bulk load Operating system error code 5(Access is denied.)

I built a SSRS 2005 report, which calls a stored proc on SQL Server 2005. The proc contains following code:
CREATE TABLE #promo (promo VARCHAR(1000))
BULK
INSERT #promo
FROM '\\aseposretail\c$\nz\promo_names.txt'
WITH
--FIELDTERMINATOR = '',
ROWTERMINATOR = '\n'
SELECT * from #promo
It's ok when I manually execute the proc in SSMS.
When I try to run the report from BIDS I got following error:
*Cannot bulk load because the file "\aseposretail\c$\nz\promo_names.txt" could not be opened. Operating system error code 5(Access is denied.).*
Note: I have gooled a bit and see many questions on this but they are not relevant because I CAN run the code no problem in SSMS. It's the SSRS having the issue. I know little about the security of SSRS.

I'm having the same type of issue. I can bulk load the same file into the same table on the same server using the same login on one workstation, but not on another. I get this error:
Msg 4861, Level 16, State 1, Line 1
Cannot bulk load because the file "\\xxx\abc.txt" could not be opened. Operating system error code 5(Access is denied.).
I've checked SQL client versions and they are the same, I've also set the client connection to TCP/IP only in the SQL Server Configuration Manager. Still this one workstation is getting the error. Since the same login is being used on both workstations and it works on one but not the other, the issue is not a permissions issue. I can also have another user login into the bad workstation and have the bulk load fail, but when they log into their regular workstation it works fine. Any ideas on what the client configuration issue is? These are the version numbers for Management Studio:
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.085.1132.00 (xpsp.080413-0852)
Microsoft MSXML 2.6 3.0 5.0 6.0
Microsoft Internet Explorer 6.0.2900.5512
Microsoft .NET Framework 2.0.50727.1433
Operating System 5.1.2600
Thanks,
MWise

Your firefox profile cannot be loaded. It may be missing or inaccessible. Firefox will not open and I don't have another internet program on my computer. How can I get the profile back?

Everytime I try to open firefox on my desktop it says "Your Firefox profile cannot be loaded. It may be missing or inaccessible." So now I cannot open firefox at all and I can't figure out how to get a profile. I just had to delete some programs to gain memory on my system and that is when the problem started. I don't have another internet program

Hi crmn,
Have you looked at the Knowledge Base article [[Recovering important data from an old profile]]? There are steps in there that might help you. You might just want to create a new profile and start fresh.
Hopefully this helps!

This application is not compatible with your device and cannot be loaded

Hi,
I have been trying to load an application to my BB 9000 since a monday and getting this error "This application is not compatible with your device and cannot be loaded".
As evident, I am new to BlackBerry development and got to port an existing J2ME project on BB 9000.
To load application I am using
- BB Dektop software 5 (latest)
- BB Device Software 4.6 is installed (which is the version of BB 9000 as well)
I am able to load sample JDE 4.6 applications but I build my project through same JDE and through eclipse (JDE compoment 4.6.0.19) as well but couldn't load it,
I even signed my app since I am using net.rim.device.api.servicebook api which requries signing.
Can someone please explain me
1) why this error occurs in first place
2) how to setup right envioroment to load an application on a given BB handset (BB 9000 vodafon India to be specific)
3) How would manage this process on a single machine if I have 4-5 different BB handsets.
I shall be thanful for any logical pointer to solution to these problems.

Hi,
The main problem with your genrated ALX file. I think in your ALX file contains <fileset Java="1.49" _blackberryVersion="[5.0.0)"> TAG and remove the _blackberryVersion attribute. Then it will work.
So your final ALX file contains
<loader version="1.0">
   <application id="App">
       <name >
           App1
       </name>
       <description >
       </description>
       <version >
           1.0.0
       </version>
       <vendor >
            Vim
       </vendor>
       <copyright >
           Copyright (c) 2010
       </copyright>
       <fileset Java="1.49">
           <directory >
               5.0.0
           </directory>
           <files >
               App.cod
           </files>
       </fileset>
   </application>
</loader>
Even thought it is not installed then make sure that your application may not delete from your device. Select the application and click on delete button in Desktop manager.
Still u didnt slove the problem then insted of
<directory >
               5.0.0
    </directory>
replace as
<directory >
</directory>
Regards:
Jitendra.B
Vimukti technologies Pvt Ltd
Project Manager

Firefox won't open...error message - "your firefox profile cannot be loaded. . It may be missing or inaccessible." Please help. I have unistalled & reinstalle

Firefox won't open for me. I keep getting the errors listed below:
"your firefox profile cannot be loaded. . It may be missing or inaccessible."
"Firefox is already running, but is not responding. The old Firefox process must be closed to open a new window."
Nothing is running. I've killed all the firefox processes, restarted, uninstalled and reinstalled.
What can I do?
Thanks
Kris

Did you delete the profiles.ini file?
*http://kb.mozillazine.org/profiles.ini_file
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*Windows: %AppData%\Mozilla\Firefox\<br>C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Profiles\<profile>\
*Linux: ~/.mozilla/firefox/
*Mac: ~/Library/Application Support/Firefox/
You can use one of these to make Firefox create/use a new default profile:
*Delete the profiles.ini file to force Firefox to create a new default profile
*Use the Profile Manager to create a new profile
*Use "Choose Folder" when you create a new profile to select the location of a lost profile and recover this profile
*http://kb.mozillazine.org/Profile_Manager
*https://support.mozilla.org/kb/Managing+profiles
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Cannot d/load Keynote

Similar Messages

Maybe you are looking for