Cannot display remote X apps
Solaris 10 10/08 on a Sunblade 1500; xhost + <remote host>; ssh <remote host, Solaris 9> & log in ; setenv DISPLAY <sunblade 1500 host>;
When we test /usr/openwin/bin/xclock app, it says cannot open display. This sunblade won't let ANY remote X apps display.
This works fine on otherr Solaris 10 installs on Sunblade 1500s, including mine
Same problem with CDE when we test.
Any ideas? Debugging suggestions?
First of all, you should really be doing:
% ssh -X <remotehost> /usr/openwin/bin/xclock
The -X does all the display forwarding for you, no need to mess with xhost (which is inherently somewhat insecure) or setenv DISPLAY.
As for the error, what does:
% svccfg -s x11-server listprop options/tcp_listen
tell you? If it says the value is false, you'll have to set it to true with:
% svccfg -s x11-server setprop options/tcp_listen = true
You might have to restart the X server afterwards.
Similar Messages
-
Cannot display remote images in HTML messages
Hi all.
This has been a problem since Tiger for me and ironically, is affecting me on two macs (although I sync the two together, so whatever the problem is, I'm guessing it's been copied to both locations). Here's the deal:
I cannot display images in my messages. If I click the checkbox (under viewing in mail prefs) "display remote images in HTML messages" I get the same behavior as if it is unchecked. I've tried checking and unchecking to no avail. My guess is a corrupted preference file, but I don't know which one. If I delete my mail prefs, will I need to do anything with regards to my mailboxes etc? I have over 3GB of offline mail, all filed away into hundreds of folders and do NOT want to mess with that.
Any suggestions are most appreciated. I'd love to see my images again without clicking on the "load images" button for EVERY email.
Thanks,
RobI can't believe there's no answer for this at Apple Support! (I looked.) On my MacBook with Leopard (10.5.6 and Mail 3.5) the problem is fairly recent - I only noticed it a few days ago. Unchecking and rechecking the Display remote images in HTML messages does not work, and neither does restarting the computer (I rarely do, preferring to put it to sleep.) Before I removed the plist I thought I'd check here first, having the same reasons for reluctance as xrob - and a good thing I did, too. I'd hate to have the same (bad) experience as someone who already tried it. The only thing I can think that I changed recently was to add SSL support to (all) my accounts. Could that be the culprit? I guess not. I removed "use SSL" on one of the accounts but it changed nothing, except for the port number. I closed and re-opened Mail but did not restart the computer. And, where do you find the "load images" button?
-
HT1947 Remote Apps cannot display in landscape mode in iOS7
My ipad 4 cannot display the Remote App in landscape mode after upgraded to iOS7, also the response is very slow when choosing album, songs or Artist
Is there a lock symbol at the top of the screen next to the battery indicator ? If there is, then depending on what you've got Settings > General > Use Side Switch To set to (rotation lock or mute notifications), then you can lock/unlock the rotation by the switch on the right hand side of the iPad above the volume switch, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
If there isn't a lock symbol then try a soft-reset (is that what you mean by restarting ?) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Apps tab of Creative Cloud desktop helper constantly displays "Download error. press retry or contact customer support". As well as reloading, I've also quit CC desktop helper, restarted computer, checked network settings, relogged in. Cannot download any new apps or updates. please help.
System: Mac OSX 10.9.4. 3.4ghz intel core i7, 8gb ramHello,
Adobe has brought these new links in this matter:
Troubleshoot Creative Cloud download and install issues and
App doesn’t open; progress wheel spins continually
Please have a look there. If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences. I quote from Preran: The chat button is activated as soon as there is an agent available to help.
Good luck!
Hans-Günter -
Hi all,
DB:11.2.0.3.0
EBS:12.1.3
O/S: Sun Solaris SPARC 64 bits 5.10
EBS URL 12.1.3 cannot display web page though apps services are up. This target instance is SSL enabled and cloned instance. Autoconfig runs successfully on both the tiers.
1 DB node and 1 apps Node(forms,Reports,CM,Web).
DB Tier Autocofig:
Updating rdbms version in Context file to db112
Updating rdbms type in Context file to 64 bits
Configuring templates from ORACLE_HOME ...
AutoConfig completed successfully.
$
Autoconfig Apps Tier
Configuring templates from all of the product tops...
Configuring AD_TOP........COMPLETED
Configuring FND_TOP.......COMPLETED
Configuring ICX_TOP.......COMPLETED
Configuring MSC_TOP.......COMPLETED
Configuring IEO_TOP.......COMPLETED
Configuring BIS_TOP.......COMPLETED
Configuring AMS_TOP.......COMPLETED
Configuring CCT_TOP.......COMPLETED
Configuring WSH_TOP.......COMPLETED
Configuring CLN_TOP.......COMPLETED
Configuring OKE_TOP.......COMPLETED
Configuring OKL_TOP.......COMPLETED
Configuring OKS_TOP.......COMPLETED
Configuring CSF_TOP.......COMPLETED
Configuring IGS_TOP.......COMPLETED
Configuring IBY_TOP.......COMPLETED
Configuring JTF_TOP.......COMPLETED
Configuring MWA_TOP.......COMPLETED
Configuring CN_TOP........COMPLETED
Configuring CSI_TOP.......COMPLETED
Configuring WIP_TOP.......COMPLETED
Configuring CSE_TOP.......COMPLETED
Configuring EAM_TOP.......COMPLETED
Configuring FTE_TOP.......COMPLETED
Configuring ONT_TOP.......COMPLETED
Configuring AR_TOP........COMPLETED
Configuring AHL_TOP.......COMPLETED
Configuring OZF_TOP.......COMPLETED
Configuring IES_TOP.......COMPLETED
Configuring CSD_TOP.......COMPLETED
Configuring IGC_TOP.......COMPLETED
AutoConfig completed successfully.
$
---------------------------------+--------------------+---------+---------
ias-component | process-type | pid | status
---------------------------------+--------------------+---------+---------
OC4JGroup:default_group | OC4J:oafm | 10466 | Alive
OC4JGroup:default_group | OC4J:forms | 10425 | Alive
OC4JGroup:default_group | OC4J:oacore | 10062 | Alive
OC4JGroup:default_group | OC4J:oacore | 10061 | Alive
OC4JGroup:default_group | OC4J:oacore | 10060 | Alive
OC4JGroup:default_group | OC4J:oacore | 10059 | Alive
HTTP_Server | HTTP_Server | 9993 | Alive
adopmnctl.sh: exiting with status 0
grep -i s_active_webport $CONTEXT_FILE
<activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
Could anyone please advise what's wrong here. Why URL is not being accessible.
Thanks for your time
Regards,Yes. We are using SSL in all te instances. Please see the comparison between the working and non-working instance
Source Instance(Working instance)
$ grep s_webssl_port $CONTEXT_FILE
<web_ssl_port oa_var="s_webssl_port" oa_type="PORT" base="4443" step="1" range="-1" label="Web SSL Port">4508</web_ssl_port>
$
$ grep -i s_https_listen_parameter $CONTEXT_FILE
<httpslistenparameter oa_var="s_https_listen_parameter">4508</httpslistenparameter>
$ grep s_active_webport $CONTEXT_FILE
<activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
$
$ grep -i s_enable_sslterminator $CONTEXT_FILE
<sslterminator oa_var="s_enable_sslterminator"> </sslterminator>
Target Instance(This does not work)
$ grep s_webssl_port $CONTEXT_FILE
<web_ssl_port oa_var="s_webssl_port" oa_type="PORT" base="4443" step="1" range="-1" label="Web SSL Port">4519</web_ssl_port>
$
$ grep -i s_https_listen_parameter $CONTEXT_FILE
<httpslistenparameter oa_var="s_https_listen_parameter">4519</httpslistenparameter>
$
$ grep s_active_webport $CONTEXT_FILE
<activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
$
$ grep -i s_enable_sslterminator $CONTEXT_FILE
<sslterminator oa_var="s_enable_sslterminator"/>
Any suggestions?
Thanks, -
Print Screen using new Microsoft Remote Desktop app on Mac
I am trying to figure out how to do a screen capture of a window using the new Microsoft Remote Destkop app on my MacBook Pro. I don't have a numeric keypad so the Ctrl+Alt+Minus on the keypad does not work. On the older remote desktop
client there were preferences to remap this but I cannot figure it out on the new app. And the snipping tool is great if connected to an OS that has it. Otherwise it does not help.
Thanks!
RichardHi,
Please check if you have the PrtScn key on your keyboard. If so, you can use this key to capture a full screen screenshot and paste it such as MS paint.
If you do not have the key, you can start the On-Scrren Keyboard to use the PrtScn Key within the remote session.
Control Panel\Ease of Access\Ease of Access Center
Hope this helps.
Jeremy Wu
TechNet Community Support -
Setting up Remote Desktop Apps for access from a Mac with 2FA
Hi
Setting up Remote Desktop Apps for access from a Mac with 2FA.
I have a server 2012 remote access gateway, with remote apps published(which uses single signon), behind a 2FA connection (web based) and want to know if its possible to allow macs to connect to the remote Apps behind it. i cannot permanently remove any
of the above setup as it is a requirement.
When i connect from a mac i can login to both the 2FA and remote access web pages and see all the apps but when i click on any app it downloads it to the mac and when i try to run it using Remote Desktop App for MAC i get an error :
"httpendpointexception: 4, The non-proxy http connection failed to connect with the message: 500 internal Server Error."
I have tried with 2fa turned off for testing and get the same result.Does it support 2012 TSGW server? does it support Remote desktop apps? as i cant find a definitive answer on either.
Thanks in advance for any advice.Hi,
Thank you for posting in Windows Server Forum.
From Error description it seems to be a communication issue between your Mac and your RD gateway server. If you connect from extranet, you may need Remote Desktop Gateway or a VPN/Direct Access connection to your intranet, or forward port 3389 on your router.
500 Internal Server Error seems to be a HTTP related error.
The HTTP status code in IIS 7.0, IIS 7.5, and IIS 8.0
Also, please double check the settings if you have a RD gateway implemented in you intranet.
http://redmondmag.com/articles/2013/12/24/rd-gateway-in-windows-server.aspx
In Windows Server 2012 R2 RD Gateway pluggable authentication is also introduced. This allows custom authentication routines to be used with RD Gateway. For example building a two-factor solution on top of RD Gateway is now possible which allows doing token-authentication
to the RD Gateway which works seamlessly with RD Web Access or RDP file launching.
Please check below article for more information.
Windows Server 2012 R2 is coming what does this add to RDS – VDI
In addition, please provide the log file from the client for further research.
Microsoft Remote Desktop -> About Microsoft Remote Desktop -> Send log via email
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support -
I'm running OS X 10.6.8 on a MacBook Pro and cannot connect to the App store. How do I fix this?
I have downloaded and installed the 10.6.8 V1.1 Combo pack but this didn't fix the problem.Check the 'More Like This' and you may find a solution. (The box on the right side of this display)
Ciao. -
Users from an external organization authenticating to a Remote Dekstop App
Hi,
We have set up Remote Desktop Apps using Remote Desktop Services
The apps are permissioned with AD user accounts in our forest
When an external company that has network access (i.e. routable addresses) tries to log in (with credentials in our AD) they sometimes get in and other times do not. They see an error message saying 'The credentials did not work' or 'The Local Security Authority
cannot be contacted'
I think this may be because all the Domain controllers for that domain are not reachable from the external company's PC
i.e. if they get lucky they try and authenticate using a reachable DC but sometimes they pick a DC that is not routable and see this error
Is my thinking correct?
How is a DC chosen by a PC belonging to an external company?
This article leads me to believe it is random:
How Domain Controllers are Located Across Trusts
Thank you for your timeHope this may help:
"Your credentials did not work" error when connecting to Windows Azure VM's
http://blogs.msdn.com/b/narahari/archive/2011/08/29/getting-quot-your-credentials-did-not-work-quot-when-connecting-to-windows-azure-vm-s.aspx
http://social.technet.microsoft.com/Forums/windows/en-US/5ca3e416-e500-4b7c-a309-f15123914e5b/your-credentials-did-not-work?forum=w7itpronetworking
http://social.technet.microsoft.com/Forums/windowsserver/en-US/aa054168-8811-4329-8eb3-a07be874c71a/your-credentials-did-not-work-the-logon-attempt-failed?forum=winserverDS
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
IE browser and Web Cache and SSL - Internet Explorer cannot display the web page
When using IE8, IE9, or IE10 with Web Cache and SSL certain pages which display a lot of data returns the error - "Internet Explorer cannot display the web page."
if we eliminate SSL but continue to use Web Cache, the error does *not* reproduce & If we eliminate Web Cache altogether the error again does *not* reproduce. The error is only reproducible when we use SSL with Web Cache and if we use IE and we access *large* pages. The error is not reproducible with Firefox or Chrome. This is a Web Tier 11.1.1.7 installation with WebLogic 10.3.6 & Red Hat Enterprise 5 Linux x86-64
Event_log shows below errors.
[2013-06-13T16:34:35-04:00] [webcache] [NOTIFICATION:1] [WXE-09002] [logging] [ecid: ] Generated by Oracle Web Cache on Thu Jun 13 16:34:35 2013 - Build 11.1.1.7.0 130113.0721
[2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-08513] [logging] [ecid: ] Cache server process ID 4469 is starting up.
[2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-09612] [main] [ecid: ] Oracle Web Cache 11g (11.1.1.6), Build 11.1.1.7.0 130113.0721
[2013-06-13T16:34:37-04:00] [webcache] [NOTIFICATION:1] [WXE-13002] [config] [ecid: ] Maximum allowed incoming connections are 1000
[2013-06-13T16:35:00-04:00] [webcache] [NOTIFICATION:1] [WXE-09441] [stats] [ecid: ] DMS enabled
[2013-06-13T16:35:28-04:00] [webcache] [NOTIFICATION:1] [WXE-12209] [cluster] [ecid: ] A 1 node cluster successfully initialized
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ] The following Oracle Web Cache internal files are pre-populated to the cache: [[
/nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_static_.html
/nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_static_.html
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ] [[
The following Oracle Web Cache internal files are pre-populated to the cache: [[
/nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_checkserviceavailability_.html
/nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_checkserviceavailability_.html
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09608] [main] [ecid: ] The cache server process started successfully.
[2013-06-13T16:35:29-04:00] [webcache] [WARNING:1] [WXE-12104] [utl] [ecid: ] Oracle Web Cache process has page faulted
[2013-06-13T16:44:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55145
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55144
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55148
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
Any help or suggestions are greatly appreciated
Tnx a lot,
LokeshHello ,
Try Below Workarounds:
Workaround 1:
Open Central Admin
àApplication Management à
Configure Alternate access mapping-->Edit your web application zone and add your server name in Intranet zone. So default can be serverIP and intranet could be servername.
Workaround 2:
Might be there is some issue with DNS and try to check that WebApplication is pointing to correct IP or not.
Also try to access your Sharepoint site using ip Address .. If you still gets error Kindly share the logs ..
Best
Regards Kuldeep Verma
Please remember to click "Mark As Answer"
if a post solves your problem or "Vote As Helpful" if it was useful. -
Sleep Timer Feature in iTunes via Remote iOS app
I'm not sure this is the venue for this, but I would like the "Remote" iOS app (currently version 3.0.1) to let me set a "sleep timer" when I play a radio station on my iMac iTunes 11. I think this means iTunes must first have a "sleep timer" feature built-in before the Remote app can use it. There have been third-party "sleep timer" add-ons for YEARS, and yet Apple has not deemed it necessary to add the feature into iTunes. Unfortunately, these third-party add-ons cannot be accessed via the Remote app.
Anyone here found a work-around?ok so the remote app is grouping all my album artists together under one Artist name: "various artists"
need to find a way to stop this from happening -
Cannot display BIG5 characters for web applications deployed to 9iAS
I have just installed the J2EE and Webcache module of Oracle9iAS Release 2 to
my Windows NT Server 4.0 and deployed a simple web application to it. However,
I found that the JSP cannot display chinese (Big5) characters correctly. My JSP
is something like:
<%@ page contentType="text/html; charset=BIG5" %>
<HTML><BODY>
<% String s = SOME_BIG5_CHARACTERS; %>
<%= s %>
</BODY></HTML>
On the other hand, I tried to re-direct the standard output to a log file and
do the following in my servlet.
System.out.println(SOME_BIG5_CHARACTERS);
Now, the Big5 characters CAN be displayed correctly in the log file. So, I am
confused with where the problem is.
Here are my settings to my 9iAS:
1) Using regedit, I have set the NLS_LANG variable of the corresponding
ORACLE_HOME to TRADITIONAL CHINESE_TAIWAN.ZHT16BIG5
2) In the file %ORACLE_HOME%\Apache\Jserv\conf\jserv.properties, I have
inserted the following line:
wrapper.env=NLS_LANG=TRADITIONAL CHINESE_TAIWAN.ZHT16BIG5
3) In the file %ORACLE_HOME%\Apache\Apache\conf\httpd.conf, I have added the
following line:
PassEnv NLS_LANG
4) In the file %ORACLE_HOME%\opmn\conf\opmn.xml, I have added the following
line to the corresponding OC4J instance:
<environment>
<prop name="NLS_LANG" value="TRADITIONAL CHINESE_TAIWAN.ZHT16BIG5"/>
</environment>
5) For my application server, I set the java option with -Dfile.encoding=Big5
6) I have replaced the file font.properties with font.properties.zh_TW under
%ORACLE_HOME%\jdk\jre\lib.
7) I have set the following in the file orion-web.xml of my web application:
<orion-web-app
deployment-version="9.0.2.0.0"
default-charset="Big5"
jsp-cache-directory="./persistence"
temporary-directory="./temp"
internationalize-resources="false"
default-mime-type="application/octet-stream"
servlet-webdir="/servlet/">
</orion-web-app>
Anyone have idea on fixing my problem? Thanks in advance.
Regards,
KaeI met a similar problem before but not exactly your case. When I compile the JSP by Jdeveloper, it will convert the chinese characters to strange characters. It makes me crazy to handle the chinese characters ...
Anyway, by my experience, you better isolate the chinese characters from your JSP or Java programs. Instead, put all language dependent text in a properties file and then use native2ascii to covert your properties file into Unicode. Of course, u need to change your page charset to UTF-8.
U can get more idea from the following site.
Brief Description of Internationalization:
http://java.sun.com/products/jdk/1.2/docs/guide/internat/faq.html
Detail Tutorial:
http://java.sun.com/docs/books/tutorial/i18n/
Native-to-ASCII converter:
http://java.sun.com/products/jdk/1.2/docs/tooldocs/win32/native2ascii.html -
Hi,
I have successfully install Oracle Application R12 on Window Server 2003. Yesterday everything looking good until I try install APEX 3.0 on it.
Now I cant login into my Apps again. When I type http://dev.thcp.com:8000/ in the browser, the page redirected to http://dev.thcp.com:8000/OA_HTML/AppsLogin, but the html body display "The page cannot be found", HTTP 404.
I have remove all APEX installation and configuration files on OAS, restart the machine, and turn it on again. All of services (Database, listener, concurrent manager) has been started successfully, but AppsLogin page still cannot display.
Help me. Does anyone know what mistake i have made? How i fix it, so I can login to my apps again. Have you install APEX on Oracle Application R12 instance? I need some guidance to install APEX on my Apps.
Thanx a lot,
Agas
PS: The java applet can showed when I pushed to open form by type:
http://dev.thcp.com:8000/forms/frmservlet?&serverApp=OracleApplications&lang=US&env=NLS_LANG='AMERICAN_AMERICA'+FORMS_USER_DATE_FORMAT='DD-MON-RRRR'+FORMS_USER_DATETIME_FORMAT='DD-MON-RRRR+HH24:MI:SS'+NLS_DATE_LANGUAGE='AMERICAN'+NLS_SORT='BINARY'+NLS_NUMERIC_CHARACTERS='.,'&form_params=+config='PROD'+icx_ticket='.1cnZ31mXJUjxdn0zAQjBSA..'+resp='SYSADMIN/SYSTEM_ADMINISTRATOR'+secgrp='STANDARD'+start_func='FND_FNDCPVCM'+other_params=''&encoding=US-ASCII
However the form is blank, just display the Window menu toolbar and an error message:
APP-FND-01516: Invalid application username, password or database.
Username: APPLSYSPUB
Database: databasenothing to be sorry about :)
You can use EBS General discussion forum General EBS Discussion for this issue.
--Shiv -
Error: Cannot display Gantt chart in PWA 2010
Hi,
With a brand new instance of Project Web App 2010, I cannot display any project Gantt Chart: "Error: cannot display this view".
NB: on the client Win 7 PC, there are several versions of MS Office installed: 2003; 2007, 2010. I was told that this could be the issue.
Any ideas?
ThanksIt means when you click on schedule Project detail page for project you are getting issue can not display the view.
.In the PWA under the quick launch bar click on Server Settings.
2.On the Server Settings page, under Security click on Manage Groups.
3.On Manage Groups page click on administrator.
4.Under Categories section, click on My Tasks. Under Permission for My tasks Allow “Open Project” permission.
5.Under Global Permission ensure “New Project” is enabled.
6.Click Save button.
Please do the same for project manager and team member group then check from different user which will have project manager
permission .
Let us know the result.
kirtesh -
Hi all,
DB:11.2.0.3.0
EBS:12.1.3
O/S:Solaris SPARC 64 bits
I.E Browser: 9.0
Problem Description
Cloned target database TEST1 from source database TEST2 RMAN full backup. But on accessing https url EBS R12.1.3 leads to "Internet Explorer cannot display the webpage"?
Autoconfig completes successfully on both DB and Apps Tier and have also ran ojspcompile but still the same issue.
$ perl ojspCompile.pl --compile --flush -p 2
logfile set: /t000/test1/inst/apps/TEST1_Hostname/logs/appl/rgf/ojsp/ojsp
starting...(compiling all)
using 10i internal ojsp ver: 10
synchronizing dependency file:
loading deplist...8095
enumerating jsps...8095
updating dependency...0
initializing compilation:
eliminating children...6024 (-2071)
translating and compiling:
translating jsps...6024/6024 in 7m50s
compiling jsps...6024/6024 in 35m17s
Finished!
Bounced the services there after still the same issue. Could anyone please share the fix if encountered such an issue before.
Thanks for your time,
user10088255Apache logs have the below entry:
[Sun Oct 27 02:30:11 2013] [notice] configured -- resuming normal operations
[Sun Oct 27 02:30:11 2013] [notice] Accept mutex: fcntl (Default: fcntl)
[Sun Oct 27 03:03:02 2013] [notice] configured -- resuming normal operations
[Sun Oct 27 03:03:02 2013] [notice] Accept mutex: fcntl (Default: fcntl)
[Sun Oct 27 04:04:59 2013] [notice] configured -- resuming normal operations
[Sun Oct 27 04:04:59 2013] [notice] Accept mutex: fcntl (Default: fcntl)
[Sun Oct 27 04:29:54 2013] [notice] configured -- resuming normal operations
[Sun Oct 27 04:29:54 2013] [notice] Accept mutex: fcntl (Default: fcntl)
Maybe you are looking for
-
ICR - Selection times for Customer vs Vendor open items
All/Ralph We have implemented note 1349849 and tested the selection again. I now have a strange result. The selection of customer open items is fast i.e. 120 000 records in 850 sec, however, the selection of the vendor items takes takes 3600 sec for
-
HT1923 why is itunes not installing correctly. keep getting error 7
I keep getting a message saying something about my apple mobile device (error 7) when I am trying to install itunes on my laptop
-
My officejet 6500 has an error msg of jam/misfee​d when there is none.
My officejet 6500 had some water fall onto it. Luckily some paper was piled on top and blocked most of it. But some of the water seeped in where the copier rollers are. I let it dry completely and nothing was affected, re: printing. About a week late
-
Hello Java experts, A questions for you regarding pojos in a List. I have a pojo called 'Role' which has 2 instance variables - int Count and String RoleType. I have a List of Roles, which I want to parse to find out if a particular RoleType is prese
-
Regarding Versioning of Project Code
Hi, We are facing one issue. Please try to provide some resolution for the same. We deployed one .exp on Oracle BPM Server for Weblogic and then created new instances which have reached to certain interactive activity. Now, we increased the project v