My officejet 6500 has an error msg of jam/misfee​d when there is none.

My officejet 6500 had some water fall onto it. Luckily some paper was piled on top and blocked most of it. But some of the water seeped in where the copier rollers are. I let it dry completely and nothing was affected, re: printing. About a week later, I put something heavy'ish on top, which might or might not be the problem too, just thought I'd mention it. After putting the heavy item on top, the printer came up with the error message that there was a jam or misfeed in the scan path. Trust me, there's no misfeed, and there is no jam. I suspect something happened in there to misalign it somehow, either due to the moisture or the weight (it was a heavy picture frame) on it for about an hour.
I have tried what I can to make this go away. I miss being able to use the feeder to either scan multiple pages or to copy them. I can't use the copier at all, but I can still scan a page at a time, but it takes forever, and I have to quickly hit cancel, then scan before the error kicks back. It's tedious.
I don't want to lose the printer, but then again, it's not worth enough to hire someone to fix. Any ideas on how to fix or salvage?

A hard reset can resolve this issue. But I suggest that you do it under the supervision of an HP Tech over the phone. This way, if the issue is still unresolved, they can replace the printer.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Similar Messages

  • Error msg on my iphone 4 when downloading ios7. is this because i didn't download ios6?

    Seeing error msg on my iphone 4 when downloading ios7. Is this because I didn't download ios6? What can I do?

    Try updating via iTunes on the computer.
    If insistent about updating directly on the device, ensure there is sufficient free space on the device, at least 3GB of free space is required.  Try a reset and restart of the device.
    There should be no requirement to be on iOS6 to update to iOS7.

  • "an unknown internal condition has occured" error msg in MAX; fieldpoint module

    Hi All,
    I'm trying to resolve repeated 33162 errors on my Labview system (looks like it's a problem communicating with fieldpoint modules).
    I ran the MAX program to try and browse the fieldpoint controllers in the remote systems node, clicking on several of them caused
    a delay then the error msg. "an unknown internal condition has occured. Possible cause unrecoverable operating system error", see
    attached screenshot.  I should be able to browse the devices under the remote systems node, correct?
    Attachments:
    max-unknowninternalcondition.jpg ‏127 KB

    For any readers, I was able to solve the problem.  I had to reset one of my fieldpoint modules then the problem went away.  Must have been a communication problem between the PC and the fieldpoint module, so I don't see this error anymore.

  • Error msg like :ORACLE not started when login through SQL Tool

    Hi All,
    When i login through SQL TOOL (either sysdba/system/scott... any user) the error msg like ORACLE not started ....
    so i check the services from controlpanel->administraive tools->services ->Oralceservice<dbname> service ... so in this service is in manual & starting but not started.....
    This happen becoz i stated in manual first time & now i change it then it display as strating not started.....
    pls. if u have any solution related to this service infrom me...
    Thx

    Make your instance service in the windows services as auto start. However, if it show starting not started, just stop and start again. Otherwsie, shutdown your windows and start it again.
    Jaffar

  • Officejet 6500 wireless question: error code (0x61011bed)

     The error code came up after copying a 7 page document. First showed a paper jam. Found no paper in printer or doc handller. What does the error code mean? Thanks, in advance.

    Hello rusty1roe, and welcome to the HP Forums!
    I see you're having a 0x61011bed error. I would love to try and help with that!
    First thiong I would suggest would be  a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    If that doesn't resolve your issues, I would suggest following through with the steps listed in this document on A 'Carriage Jam' or '0X610000F6' Message Displays on the All-in-One.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • I got a error msg "invild procedure or argument" when call ud% = ildev(, , , , , ) in VB 5.0 application

    My application callS Dev% = ildev(0, 1, 0, T3s, 1, 0). Then Real time Error appears "invild procedure or argument" .
    PC has installed MAX 2.0 (NI)
    what is the solution for it?

    Generally that error means you are passing your function invalid values, but from what you posted everything looks fine to me. Have you tried running any of the shipping examples that use ildev? For example the Devquery example? You can usually find these examples in the following directory.
    C:\Program Files\National Instruments\NI-488.2\Languages\Visual Basic
    It would be interesting to see if the example has the same error.
    Shawn B.
    National Instruments
    Use NI products on Linux? Come join the NI Linux Users Community

  • Error msg "no modem found!" when trying to connect...

    Hi.
    I'm getting this error message when I tried to connect to N95 via bluetooth as modem, using "One Touch Access". I can use "One Touch Access" to connect with N95 via USB cable, though.
    My hardware is:
    Toshiba R150 laptop;
    Generic bluetooth adaptor with IVT BlueSoleil as driver;
    Windows SP2;
    PC Suite 6.86.9.3;
    Nokia N95
    Any solution?

    hi,
    i know you want bluetooth, but cable is really much better ya know...
    but if you insist on BT, well couple of thing i could suggest:
    test and make sure that BT is working properly, you can do this by sending files via bt on both ways
    make the N95 as default modem, then goto it and query it, just to make sure it is working well...
    thats all i could think of at the moment...

  • My ipod has an error that makes a blue line when i get in an app what can i do ?

    hi every single time i get in an app there apears a big blue line moving to every corner i dont know what can i do please help

    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, and it does not connect to other networks, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                                                              

  • Error message that HD is full, when there is space on the HD

    Hi, I'm trying to save a Word doc on my mac OS X 10.4.11 but I keep getting an error message saying my hard drive is full. I tried restarting my computer, and I've freed up at least a GB since, but keep getting the same error message when I try to save my Word doc. Any ideas on what might be wrong? Thank you!

    mungopark:
    Welcome to Apple Discussions.
    What is the total capacity of your HDD and how much free space do you have? (Select Macintosh HD icon and Get Info: Command + I)
    You need to maintain a minimum of 15% of total disk capacity as contiguous free space for swap files and to avoid directory corruption. You really need a larger capacity HDD. Meanwhile Dr. Smoke's FAQ Freeing space on your Mac OS X startup disk has helpful ideas of freeing up space until you can get a larger drive.
    cornelius

  • SQL-01403 error reported in a Report Region when there is data to display

    I have a report region populated by a PL/SQL function body returning a SQL Query. When the region is displayed, "ORA-01403: no data found" is output when there should be rows displayed on the report. I see a lot of postings related to ORA-01403, but none seem to describe why this problem occurs or how to solve it.
    Here is the generated SQL query:
    SELECT DISTINCT entry_type, active_time, expire_time, facility, via, output_remarks, p_reports.f_get_to_positions (entry_id, NULL) pos FROM (SELECT 'RSTN' entry_type, active_time, expire_time, facility, via, output_remarks, entry_id FROM v_restriction_daily_all WHERE (entry_type in ('RSTN', 'APREQ', 'GS')) UNION ALL SELECT 'RSTN' entry_type, active_time, expire_time, facility, via, output_remarks, entry_id FROM v_restriction_daily_all WHERE (entry_type in ('RSTN', 'APREQ', 'GS')) UNION ALL SELECT 'RSTN' entry_type, active_time, expire_time, facility, via, output_remarks, entry_id FROM v_restriction_daily_all WHERE (entry_type in ('RSTN', 'APREQ', 'GS')) UNION ALL SELECT 'APERQ' entry_type, active_time, expire_time, facility, via, output_remarks, entry_id FROM v_apreq_daily_all WHERE (entry_type IN ('APREQ', 'RSTN')) UNION ALL SELECT 'GS' entry_type, active_time, expire_time, facility, via, output_remarks, entry_id FROM v_apreq_daily_all WHERE (entry_type IN ('GS', 'RSTN')) UNION ALL SELECT entry_type, active_time, expire_time, facility, via, output_remarks, entry_id FROM v_edct_daily UNION ALL SELECT entry_type, active_time, expire_time, facility, via, output_remarks, entry_id FROM v_runway_daily UNION ALL SELECT entry_type, active_time, expire_time, facility, via, output_remarks, entry_id FROM v_deicing_daily UNION ALL SELECT entry_type, active_time, expire_time, facility, via, output_remarks, entry_id FROM v_delay_daily UNION ALL SELECT entry_type, active_time, expire_time, facility, via, output_remarks, entry_id FROM v_swap_daily UNION ALL SELECT entry_type, active_time, expire_time, facility, via, output_remarks, entry_id FROM v_sua_daily UNION ALL SELECT entry_type, active_time, expire_time, facility, via, output_remarks, entry_id FROM v_information_daily UNION ALL SELECT entry_type, active_time, expire_time, facility, via, output_remarks, entry_id FROM v_outage_daily ) WHERE (active_time BETWEEN TO_DATE (:G7_LOCAL_MIDNIGHT, 'YYYYMMDDHH24MI') AND TO_DATE (:G7_LOCAL_MIDNIGHT, 'YYYYMMDDHH24MI') + 1)
    I am using version 1.6.0.00.87.
    Please advise. Thanks.

    Create a summary column (lets say "CS_TotalRecords") at report level, and set the following properties:
    Function: Count
    Source: column which can not be null (if report displays some data)
    Reset At: Report
    Create a format trigger at most outer frame (the frame you want to hide and all object within that), and write following code:
    BEGIN
    IF NVL(:CS_TotalRecords,0) = 0 THEN
    RETURN (FALSE);
    END IF;
    RETURN (TRUE);
    END;
    Hope this helps.

  • HP 3015 all in one error msg

    Error msg NO PRINT CARTRIDGE even though there is a cartridge,
    I read all other help blogs.
    There is NO paper at all jammed. No small plastic parts loose
    Cartridge is in place and has been removed and reinserted many times.
    paper has been removed and reinserted many times.
    power turned off and on many times.
    I want to reset. This happened after power outage. Yes, it was on a surge protector.
    Is there any way to reset the whole thing. The cartridge is only a month old and is very full.

    Hi @sbu22plankowner,
    Welcome to the HP Forums!
    I am sorry to hear that you are getting the incompatible ink cartridges error with your HP 1051, but I am happy to help!
    Is your printer able to make copies? Copy Documents with Text and Graphics.
    Are you using a Mac or Windows Operating System? If you do not know the Operating System you are using, please visit this website. Whatsmyos.
    In the meantime, please take sometime and go through this guide, 'Incompatible Print Cartridge' or 'Print Cartridge Problem' Message Displays on the Computer or Prin....
    Hope this helps, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • 1102w gives print error msg, but prints

    I had an hp p1102w for quite some time and it perfectly fits our needs on our home wifi network.  One of the features I use on a regular basis is printing double sided.  About two months ago I started to get an error message "HP P1102 could not print (document name)", but the document printed just fine.  I didn't really worry about it until I tried to print double sided.  Now the printer prints the even numbered sides, but I never get message to turn the paper and press continue.  The printer and computer just sit there looking at each other and nothing happens.  If I press the 'X' button the error message immediately pops up on the computer and the rest of the job is lost on the printer.  I downloaded and installed the HP drivers, the HP printer doctor software, searched the forum for suggestions, tried a few suggestions that sounded vaguely like my problem, turned the firewall off and back on, and finally concluded that the printer was bad.  So I bought another one.  I get the same problem, tried the same remedies, and still am getting the error msg.
    My conclusion is that there is a communication problem between the two devices that has probably been caused by some windows update at some point.  Anybody got any bright ideas?
    Peace,
    V
    This question was solved.
    View Solution.

    Hi vneathery ,
    Thanks for letting me know you were able to print two-sided by opening and closing the lid. But still the issue exists.
    Most likely to resolve this issue, we would have to rip everything out for the printer in the registry and do a fresh install to fix this problem.
    I can send you that information in a private message and you can decide whether to continue with more steps.
    In the forum beside your handle name just click on the envelope to view it.
    You can always restore your computer back to a earlier time when everything was working properly, but you mentioned this issue started 2 months ago. How to refresh, reset, or restore your PC on Windows 8.
    How is the printer connected?
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • JDBC error msg

    Can u please tell me the reason behind this error msg:
    Scenario: Idoc to JDBC
    When I posted inout msg thru RWB,I got the following err in CC monitoring:
    Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'BPSAI_SAP_RECEIVABLES' (structure 'Statement'): java.sql.SQLException: ORA-01858: a non-numeric character was found where a numeric was expected

    hi naresh,
    There is some data from IDoc which is non numeric but it is being supplied to the DATABASE. Check which are all data you are passing and check the data type on both the side. It is basically a data type conflict.
    regards
    Ramesh P

  • Getting an error msg while trying to run the java class from CMC

    Hi All,
    I am getting an error, while trying to run the java .class file, that which is imoported into CMC.
    Error msg:
    Exception in thread "main" java.lang.UnsupportedClassVersionError: Bad version number in .class file
         at java.lang.ClassLoader.defineClass1(Native Method)
         at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
         at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
         at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
         at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
         at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
         at com.crystaldecisions.sdk.plugin.desktop.program.internal.ProgramWrapper.main(ProgramWrapper.java:49)
    I have imported .class file into CMC and trying to invoke the .class file by another java program from eclipse..When i tried to invoke the .class in cmc, i am getting an error msg, mentioned above. I thought there might be version conflict. So i changed the java complier version to 1.5 in my Eclipse. After that is done again i am facing the same problem.
    Can anyone help me to resolve this issue?
    Thanks in Advance.

    i have installed BO SDK 3.1 , Service pack 3. It comes woth JDK 1.5 version. i have not done any chnages to it. I impoprted all the jar files related to BO into eclipse.
    1)  Actually, i am writing java code on eclipse. When i run code from the eclipse, it creates a session to cmc and creates folder structure what i need.
    2)  But the thing is, that code needs to run, when i import the .class file into cmc. The process how i imported the .class file to cmc.
    Manage> Add> Program File-->Java (Check Box). In this way i added java class file from the eclipse workspace (class file from the bin directory).
    3) So when i run the .class file externally by another java program or also when i log in to CMC and run that .class file, the instance shows sucess, but when i see the logfile i am getting an exception that which i mentioned above.
    If my method is worng can you please let me know the stepts how to run java program in cmc.
    Thanks in Advance

  • Hide the error msg for the mandatory fields

    hi
    how can i hide the error msg for the mandatory fields when they are not entered?? when i don't put a value in a mandatory field and commit the form, an error msg occurs teelling to enter the value for that mandatory field, but the error msg is not friendly at all and i want to hide it.
    thnaks

    User,
    I'll assume you are talking about ADF Faces + ADF Business Components application, since you don't mention it.
    If you are talking about the pop-up Javascript dialog box that pops up, you can do the following:
    1). Set required=false on those fields in your JSP.
    2). Set showrequired=true on those same fields so that there is a visual indication that the fields are required
    3). Ensure the attribute to which the fields are bound have "mandatory" set to true in the BC's
    Now, when you commit the form, you will not see the Javascript pop-up, but you will see a message in the af:messages component.
    Best,
    john

Maybe you are looking for