Cannot enter part of my password touchscreen frozen
I cannot enter my password on touchscreen. part of the screen is frozen
Try resetting your iPhone:
http://support.apple.com/kb/HT1430
This will not erase any data from your iPhone unless the iPhone is faulty.
Hope this helps.
Similar Messages
-
I just downloaded IOS 8.5.3 on my iPad3. Now I cannot open it. Whenever I touch the screen Siri tells me what I am doing, but nothing works: I cannot enter my password and I cannot slide to open. I am frozen out from my iPad
you are right about the IOS number. I couldn't access my iPad so I guessed and guessed wrong about the number. It was the latest upgrade offered by Apple for my iPad, which I dowloaded and installed. I have done some sleuthing and discovered that some of the problems are the result of the Accessibility - Voiceover being activated. Once I figured that out, I was able to navigate somewhat better, though I now cannot turn Voiceover off. I slide the button and it just revert to On. The other problem I have now discovered that the iPad only rarely will accept my password. This is a password that I know and love and use many times during the day (as all of us iPhone and iPad users do) Now it seems to reject my password 80+% of the time. I would disable password protection if I could. I think I am going to have to talk to Apple directly but wonder if anyone else has had this kind of trouble with the newest IOS. It worked fine on my iPhone.
I will try triple tapping the home button if I can ever get it opened again. -
HT1212 my screen is frozen and i cannot enter my password. Can I disable it?
my screen is frozen on my ipad and not all number are working so i cannot enter my password correctly. Can I change it somehow using the laptop?
JaydenBesoaga wrote:
It is still requesting a password ...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
screen frozen cannot enter password,is their a way of recovering, numbers
Try resetting your phone:
Press the Sleep/Wake button & Home button at the same time, keep pressing until you see the Apple logo, then release. -
Hello,
I purchased a new Iphone 5S about a couple of months back. The phone use to hang up occassionally with a white screen and the black apple logo on it. Two days back the screen went unresponsive. I cannot enter the lock code. Everything seems to be normal otherwise. I can see the Atnt signal, I get calls. The find my iphone app on a different device can locate my iphone. I can even take screenshot by pressing the home key and power button simultaneously.
I took the phone to apple store and they say they will issue me a new phone. I dnt mind but I will loose the data on the phone. It was never backed up because my icloud is filled with data from my ipad. Is there a work around to get the data back.?
Any help is appreciated.Are you sure that the battery is not empty: when the battery is VERY empty (that is when it was on and a long time off the charger) it may take an hour or even more to start charging with the charger connected. When you have an iPad charger you can also use that one, and it charges a bit faster.
-
Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when I enter account name and password for one account, i cannot access other accounts, because windows saves username. how can i prevent this from happenning. I really need to access all my accounts and dont want it to save automaticlly.
Why have 5 accounts if you need to access all of them.. just have one account?
Sorry I cannot follow why you would even use the PC to control the Time Capsule. Apple have not kept the Windows version of the utility up to date.. so they keep making it harder and harder to run windows with apple routers. -
Installed Windows 8 on a late 2011 MacBook Air and was working fine now keyboard not working so cannot enter password? Caplocks key works but I am locked out on my own PC and cannot seem to get it to recognize built in keyboard,bluetooth,generic USB one.
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
I have entered my username and password and the message comes up as User name or password is incorrect, this has frozened this page - so I am unable to use my settings, the rest of the phone is working fine
Try "resetting" the iPhone.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears. -
After updating with ios7, I cannot proceed because I cannot enter my password since it uses Greek letters but the keyboard available is Latin. How can I change the keyboard to Greek?
try tapping holding on the key that would be most similar to the letter you want to enter, that will bring up a menu of other characters similar to that character and maybe the greek letter will be included in that menu
-
Startup screen is huge. cannot enter password. 2x tap will not reset screen size
screen size is huge. cannot enter password. 2x tap on screen will not resize. tried hard reboot, no luck
Did you try double-tapping the screen and dragging three fingers down?
-
Since upgrading to 2.0 I cannot enter my voicemail password. It keeps asking for it but only gives me the keypad for the phone. Not the normal alpha numeric keypad. Any ideas?
Here's how to approach this one.
1. Tap Settings > WiFi > Other network
2. Enter the name of the network you are trying to log onto
3. Tap Security and tell the iPod what type of security the network is using
4. Tap Password and enter the network password
If this still doesn't work, reset your network settings (tap Settings > General > Reset > Reset Network settings and try the steps above again once the iPod restarts.
If you don't know what type of security is being used by the network, ask the owner before you try to log in. WEP encryption and the iPod have a love-hate relationship so if you still have problems, do write back. -
I cannot enter my iPod Touch as it is locked with a previously set password which I can't now remember. Can anyone advise how I resolve this as my Ipod Touch is now unuseable Many thanks.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Cannot purchase songs on iTunes. After I enter Apple ID and password, Prompt says I need toed to verify my Apple ID. I enter my password again and never get the verification email although my Apple ID and email are correct? Whats up with that?
from this support article:
How do I verify my Apple ID by email?
Simply follow the link in the verification email that says "Verify Now." Sign in with your current Apple ID and password, then click Verify Address. You can also verify by signing in at My Apple ID. -
My I pad states disabled and is frozen and cannot enter access code?
My I Pad stateds dusabled and is frozen. I have powered off and everything, but, still frozen and cannot enter my access code.
Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode. -
I cannot install adobe flash onto my mac, whenever the installation box appears it asks for a password! I have entered my apple ID password and any other password I use, but still no joy! Any advice?
Exactly where are you getting your Flash from? It is quite free from the maker, no password needed.
http://get.adobe.com/flashplayer/
However, if you fell for a trap and were lured into a fake site to rob you of your Apple ID credentials, I suggest you change your passwords immediately.
Maybe you are looking for
-
Gl account is set to profit center mandatory
Hi All, which table can get the data of the GL account is to profit center mandatory ( i.e from tcode OBC4 )
-
Import BLOB data into Database
I am trying to import data into a database, via the imp command. However, it creates the rows in the tables, without the original blob data or its somehow lost the internal link to it. What could I be doing wrong, and what needs to be done to correct
-
I dont know how to make a partition help!
I dont know how to make a partition help!
-
Please answer this simple question: it plays an important role
How to write query to retreive the latest record by using PN-BEGDA , PN-ENDDA, SYDATUM,. I know using RP-PROVIDE.......other method using query i require it is urgent
-
InDesign CC won't open due to permissions
when I try to open InDesign CC it says I don't have the proper permissions and won't open at all. I have run disk utility to repair permissions, set permissions under Command i. Photoshop CC and Illustrator CC both work no problem. Can you please hel