Cannot execute planning operators Unconstrained and Profit Optimization in SAP2
Hi,
We cannot execute supply planning operators Unconstrained and Profit Optimization with user JSMITH in planning area SAP2, although these jobs were successfully executed by the same user in the past.
Any idea as to what could be the problem?
We are using SOP 3.0.2.1, EPM version 10.0 SP 18 patch 2 build 8873.
Thanks,
Bernard
looks like you are running in batch mode. perhaps the background user for your system is not set up (an operational issue for which you can file a message).
if you run in simulate mode (using simulate button), does it work? if not perhaps you're current period is not may 2014 and the data set assume this.. (you can change the current period offset similar to: update "SAP_SFND"."sap.sop.sopfnd.catalogue::SOPDM_PLANAREASET" set planoffset = 0 where plset = 'SM1BASESAPMODEL1'
Similar Messages
-
Where and how to enter plan data cost and profit center wise to get data in grr1
Hi Gurus,
Appreciate you can tell me where and how to enter plan amount cost center wise for cost elements and profit center wise for revenue elements????
So that we can get this data in grr1 report.....
Can we upload this planned data, if yes how??
Thank youHi..
If you use classic PCA, refer to Plan Data Transfer - Profit Center Accounting (EC-PCA) - SAP Library.
If you use new gl pca, refer to Transferring Plan Data from Controlling - General Ledger Accounting (FI-GL) (New) - SAP Library -
I downloaded Firefox 10.0.2 for Linux, unpacked it, tried launching run-mozilla.sh in console, but saw "Cannot execute ." (with user and root rights). My system - Xubuntu 11.04
Ok. This script file launched an old version of firefox (4), installed by package manager of Ubuntu.
I have deleted the old version, and now it launches new version.
Thank you. -
Cost Center and Profit Center Planning
Hi,
I have one Co issue. Pls Suggest me the wiseful solution.
Cost Center and Profit Center Planning.
For F-2008 Planning data they have updated in the month of Aug, 07 for Profit and Loss Items and they have revised the plan data of some cost elements in the month of oct, 2007 (say 5% Increas). when comparing the cost center report to profit center report, both are not matching. the reason when i see and reconcile the document nos and values in between cost center and profit center reports i found out that there are some documents are missing in the profit center report.
wherever plan data had revised e.g for cost element Salaries they have updated 100000 Planning cost in the month of Aug, 07. In the month of Oct, 07 increased 5% i.e.5000. In cost center line items details i found 2 documents for Rs.100000/- and Rs.5000/- But in Profit Center Line Items i am getting only Rs.5000/- Value Document.
Note. As and when KP06 Plan data has been updated Profit Center line items are generating. It is not necessary to run any programme inorder to transfer Plan Data from cost center to profit center.
Observations From My Side:-
I tried to run the transaction code 1ke0. i have selected the cost object is Cost Center, version and had given Cost Center Parameter in development and quality clients and executed the same.By this time already existing data either deleting/ riversing and creating new documents fully except manually changed data in profit center through 7ke1.
My Question is
1.Upto what extent it will work.
2.will it be possible to transfer data from cost center to profit center only missing documents which are available in cost center, without disturbing of existing data in profit center.
3.suppose if i done this activity, there are some data which was already transferred from other cost objects like internatl orders & wbs elements to Profit Center. will the data get disturbed (deleted/riversed).
Pls suggest me the wiseful way to solve theHi
Try This
BAPI_COSTCENTER_CREATEMULTIPLE
BAPI_COSTCENTERGROUP_CREATE
BAPI_PROFITCENTER_CREATE
BAPI_PROFITCENTERGRP_CREATE.
Regards,
V.balaji
Reward if usefull -
PP/DS Optimizer u2013 Planning for HALB and FERT in sequence with Optimizer
We are using PP/DS optimizer to plan the two level BOM items. FERT and HALB planned orders are converted from SNP. ROH products are not planned in APO. PPDS is not used to create or delete orders. Only scheduling is done by optimizer. Only one mode exists in PDS. Setup matrix is used for both HALB and FERT.
The requirement is to schedule HALB products in time on their own resources in time for multiple FERT orders. The optimizer does not appear to do this consistently. We use the following steps in planning run:
1. Stage numbering.
2. Schedule orders at the earliest with infinite planning. This is done to ensure there are no blank spaces at the beginning of the planning interval on resources after optimization. The result is all orders starting at the same time with multiple loading on resources.
3. Optimization with weightage for makespan and setup time. Key settings are: Forward planning, finite resource loading, pegging relevance, considering inter order relationships. All HALB and FERT resources are selected in this step. (Delays are not important within the Optimization interval and there are no stocks of HALB except when there are time gaps between HALB Orders and FERT orders. HALB order is finished earier than FERT order start.)
The question is: Is Optimizer capable of scheduling HALB and FERT on their own resources but at the right iner order timings while optimizing the setup time. Are there any key setting to watch out for in Optimization profile or Strategy profile to enable this?
If this is not possible, we will have optimize only at one BOM level and then use top down or bottom up heuristics to plan the other level.HI TemYogi,
Assumptions:
1. One PDS each for HALB & FERT level with one resource
2. HALB to be scheduled first. Based on HALB schedule, FERT has to be scheduled
To achieve this
Maintain "Maximum Lateness of a Receipt" in Pegging tab in Demand tab in Product master
in FERT PDS maintain the consumption type of HALB components as continious/ start/end of the the operation
use the planning direction as backward and reverse in DS strategy profile
Use schedule mode as Insert operation / insert operation and close gaps until end in DS strategy profile
Fix all the previous run orders in DS board for HALB and then Schedule all the HALB orders considering u r setups through optimization
Now run the optimizer for FERT
Regards
Sravan maturu
+91 9392602314 -
How To... Execute Planning Functions and Sequences from MS Office Ribbon
Dear all,
I am working with a SAP how to paper, which is called:
How To... Execute Planning Functions and Sequences from MS Office Ribbon.
It is working absolutely fine and I am pretty satisfied, but as you probably know "Control the visibility of a button based on the visibility of a related crosstab: the button just disappears once the related crosstab is not located on the active sheet."
This means, when I insert different queries in different crosstabs, only one crosstab will have my own created ribbon. Is it also possible to set another specific ribbon with other buttons for another crosstab? Can I change the macro, included in the appendix of the how to paper, regarding this issue?
Thanks in advance!
Kind regards
Dominik DrebingerHey Martin,
thanks for your reply, but I solved the problem on my own. Unfortunately my colleague did not see that the crosstabs had to be defined differently.
Like this:
Label
Screentip
Msolmage name
Crosstab name
Copy Initial Aligned
Copy Initial Aligned
CacheListData
SAPCrosstab1
Copy Initial Aligned
Copy Initial Aligned
CacheListData
SAPCrosstab3
Copy Initial Aligned
Copy Initial Aligned
CacheListData
SAPCrosstab5
The macro, provided by the HowTo, is therefore working perfectly fine.
Thanks though
Dominik -
ABAP Runtime Error while executing planning folder
Hi experts.
We have a situation where I can access our planning folders but that's not the case for one of our user. She encountered with an ABAP Runtime Error as follow:
Appreciate if anyone can help me out with this.
Runtime Error RAISE_EXCEPTION
Date and Time 20.04.2007 16:50:23
ShrtText
Exception condition "X_MESSAGE" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
A RAISE statement in the program "SAPLRSSBR" raised the exception
condition "X_MESSAGE".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
Cancel
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"RAISE_EXCEPTION" C
"SAPLRSSBR" or "LRSSBRU03"
"RSSB_AUTHORITY_IOBJVL_CHECK"
or
"SAPLRSSBR" "X_MESSAGE"
or
"UPB_PM_CUST_START " "X_MESSAGE"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "S53KJ165"
Network address.......... "10.1.53.165"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C3A11F4C00"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 3
Short dump setting....... "full"
Database server.......... "S53KJ170"
Database type............ "ORACLE"
Database name............ "BWP"
Database owner........... "SAPBWP"
Character set............ "en_US.ISO8859-1"
SAP kernel............... "640"
Created on............... "Oct 29 2006 20:42:11"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "155"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16128
EM....................... 16759712
Heap..................... 0
Page..................... 57344
MM Used.................. 10079624
MM Free.................. 2487240
SAP Release.............. "640"
User and Transaction
Client.............. 350
User................ "S51643"
Language key........ "E"
Transaction......... "UPSPL "
Program............. "SAPLRSSBR"
Screen.............. "SAPLUPB_PM_ALV 1000"
Screen line......... 2
Information on where terminated
The termination occurred in the ABAP program "SAPLRSSBR" in
"RSSB_AUTHORITY_IOBJVL_CHECK".
The main program was "UPB_PM_CUST_START ".
The termination occurred in line 416 of the source code of the (Include)
program "LRSSBRU03"
of the source code of program "LRSSBRU03" (when calling the editor 4160).
Source Code Extract
Line
SourceCde
386
l_s_range-low = l_activity.
387
APPEND l_s_range TO l_sx_auth_check_detail-range.
388
INSERT l_sx_auth_check_detail INTO TABLE <l_sx_auth_check>-auth_check_detail.
389
390
CALL FUNCTION 'RSSB_AUTHORITY_IOBJVL_REDUCED'
391
EXPORTING
392
i_infocube = g_sx_iobjvl_check-infocube
393
i_uname = l_uname
394
i_th_hierarchy = g_sx_iobjvl_check-hierarchy
395
i_message = i_message
396
i_activity_force_check = i_activity_force_check
397
CHANGING
398
c_tsx_auth_check_detail = <l_sx_auth_check>-auth_check_detail
399
c_tx_no_auth = l_tx_no_auth
400
c_ts_auth_tlevel = e_ts_auth_tlevel
401
EXCEPTIONS
402
user_not_authorized = 1
403
auth_check_failure = 2
404
auth_check_error = 3
405
inherited_error = 4
406
x_message = 5.
407
IF sy-subrc = 0.
408
REFRESH l_tx_no_auth.
409
CR 20050826 HW873685 SP29 Part 2/3 begin
410
SY-SUBRC = 2 means Auth-Obj missing in users profiles, we need this later
411
ELSEIF sy-subrc = 2.
412
ao_missing = rs_c_true.
413
e_subrc = 2.
414
CR 20050826 HW873685 SP29 Part 2/3 end
415
ELSEIF sy-subrc = 5.
>>>>>
RAISE x_message.
417
ELSE.
418
e_subrc = 2.
419
ENDIF.
420
421
correct the kid now
422
LOOP AT l_tx_no_auth INTO l_sx_no_auth.
423
l_sx_no_auth-kid = <l_sx_auth_check>-kid.
424
APPEND l_sx_no_auth TO e_tx_no_auth.
425
ENDLOOP.
426
427
ENDLOOP.
428
429
End LOOP: Check all SUBNR (FEMS)
430
431
432
CR 20050826 HW873685 SP29 Part 3/3 begin
433
If an Auth-Obj. is missing, no SUBNR can be authorized. Due to OLAP-logic
434
this means empty no_auth table
435
IF ao_missing = rs_c_true.
Contents of system fields
Name
Val.
SY-SUBRC
5
SY-INDEX
1
SY-TABIX
0
SY-DBCNT
0
SY-FDPOS
1
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
210
SY-UCOMM
SELECT
SY-TITLE
Execute All Cost Element
SY-MSGTY
E
SY-MSGID
R7
SY-MSGNO
057
SY-MSGV1
0CO_AREA
SY-MSGV2
A
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
40 FUNCTION SAPLRSSBR LRSSBRU03 416
RSSB_AUTHORITY_IOBJVL_CHECK
39 FORM SAPLRSDRC LRSDRCF15 113
AUTHORITY_CHECK
38 FORM SAPLRSDRC LRSDRCF27 57
BASIC_QUERY_DATA_GET_ROLAP
37 FUNCTION SAPLRSDRC LRSDRCU05 44
RSDRC_BASIC_QUERY_DATA_GET
36 FUNCTION SAPLRSDRC LRSDRCU15 189
RSDRC_BASIC_CUBE_DATA_GET
35 FORM SAPLRSDRC LRSDRCF25 373
DATA_GET
34 FUNCTION SAPLRSDRC LRSDRCU02 249
RSDRC_CUBE_DATA_GET
33 FUNCTION SAPLRSDRI LRSDRIU01 352
RSDRI_INFOPROV_READ
32 FORM /1SEM/UPCBW_350TMWPA01 UPC_BWINTERFC__FIX 174
DATA_READ
31 FUNCTION SAPLUPCBW LUPCBWU06 56
UPC_BW_DATA_READ
30 FUNCTION SAPLUPC1 LUPC1U06 67
UPC_DATA_READ
29 METHOD /1SEM/CL_DATA_350TMWPA01======CP UPC_DATA_READ_DB 25
/1SEM/CL_DATA_350TMWPA01=>IF_SEM_DATA_INTERNAL~READ_DB
28 METHOD /1SEM/CL_BUFFER_350TMWPA01====CP UPC_BUFFER_GET 167
/1SEM/CL_BUFFER_350TMWPA01=>IF_SEM_BUFFER~GET
27 METHOD /1SEM/CL_BUFFER_350TMWPA01====CP UPC_BUFFER_READ 5
/1SEM/CL_BUFFER_350TMWPA01=>IF_SEM_BUFFER~READ
26 METHOD /1SEM/CL_DATA_350TMWPA01======CP UPC_DATA_READ 46
/1SEM/CL_DATA_350TMWPA01=>IF_SEM_DATA~READ
25 FORM 45AJEHYBGH37F61DTX80Q9ZFP UPP_PLAN 395
READ_TRANSACTION_DATA
24 FORM 45AJEHYBGH37F61DTX80Q9ZFP UPP_PLAN 561
GET_DATA
23 FORM 45AJEHYBGH37F61DTX80Q9ZFP UPP_PLAN 800
EC500_SELECT_DATABASE
22 FORM SAPLUPP_PP_KERNEL LUPP_PP_KERNELF97 575
SELECT_DATABASE
21 FORM SAPLUPP_PP_KERNEL LUPP_PP_KERNELF97 464
SELECT_AND_FIND_HEADER_COMBI
20 FORM SAPLUPP_PP_KERNEL LUPP_PP_KERNELF97 217
LOGICAL_SCREEN_FILL_HEADER
19 FORM SAPLUPP_PP_KERNEL LUPP_PP_KERNELF97 60
LOGICAL_SCREEN_FILL
18 FUNCTION SAPLUPP_PP_KERNEL LUPP_PP_KERNELU01 114
UPP_PP_KERNEL_CONSTRUCTOR
17 METHOD CL_UPB_PL_ALV=================CP CL_UPB_PL_ALV=================CM01E 176
CL_UPB_PL_ALV=>CONSTRUCTOR
16 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF01 623
OUTPUT_CREATE
15 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF01 202
OUTPUT_INIT
14 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF01 1062
OUTPUT_PROCESS
13 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF01 1225
OUTPUT_SWITCH_TO_LAYOUT
12 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF05 748
INIT_CONTROLS
11 MODULE (PBO) SAPLUPB_PM_ALV LUPB_PM_ALVO01 13
STATUS
10 FUNCTION SAPLUPB_PM_ALV LUPB_PM_ALVU01 24
UPB_PM_ALV_START
9 METHOD CL_UPB_PM_APPLC===============CP CL_UPB_PM_APPLC===============CM00A 88
CL_UPB_PM_APPLC=>EXECUTE_PM
8 METHOD CL_UPB_PM_ADMIN===============CP CL_UPB_PM_ADMIN===============CM00L 76
CL_UPB_PM_ADMIN=>PAI_ONE_NODE
7 METHOD CL_UPB_PM_ADMIN===============CP CL_UPB_PM_ADMIN===============CM00L 23
CL_UPB_PM_ADMIN=>PAI_ONE_NODE
6 METHOD CL_UPB_PM_ADMIN===============CP CL_UPB_PM_ADMIN===============CM003 121
CL_UPB_PM_ADMIN=>PAI
5 FORM SAPLUPB_PM LUPB_PMF04 80
USER_COMMAND_0210
4 MODULE (PAI) SAPLUPB_PM LUPB_PMI04 11
USER_COMMAND_0210
3 FUNCTION SAPLUPB_PM LUPB_PMU22 86
UPB_PM_MAIN
2 FORM UPB_PM_CUST_START UPB_PM_START_ADMIN 251
PM_START
1 EVENT UPB_PM_CUST_START UPB_PM_START_ADMIN 14
START-OF-SELECTION
Chosen variables
Name
Val.
No. 40 Ty. FUNCTION
Name RSSB_AUTHORITY_IOBJVL_CHECK
I_ACTIVITY
03
33
03
I_ACTIVITY_FORCE_CHECK
2
0
I_MESSAGE
X
5
8
I_SX_IOBJVL_CHECK
ZCTMWMA05 ####
5454544332222222222222222222222222222222222222222222222222222222222222222222222222222222220000
A34D7D1050000000000000000000000000000000000000000000000000000000000000000000000000000000000000
I_UNAME
S51643
533333222222
351643000000
E_SUBRC
0
0000
0000
E_TS_AUTH_TLEVEL
Table[initial]
E_TX_NO_AUTH
Table[initial]
RSSB_C_AUTH_KEYFIGURE
1KYFNM
3454442222
1B96ED0000
SY-REPID
SAPLRSSBR
5454555452222222222222222222222222222222
310C233220000000000000000000000000000000
SYST-REPID
SAPLRSSBR
5454555452222222222222222222222222222222
310C233220000000000000000000000000000000
%_SPACE
2
0
RS_C_RANGE_SIGN
IE
44
95
SY-SUBRC
5
0000
0005
L_TX_NO_AUTH
Table[initial]
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
SYST
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1. ###################################################à##############
0000000000000000000000000002000000000000000000000000000000000000000000000000000E00000000000000
0001000000000000000000000000000000000000000000010001000000010000000000000000000000000000000000
L_SX_NO_AUTH
############ÿÿÿÿ
000000000000FFFF
000000000000FFFF
L_SX_NO_AUTH-KID
Table[initial]
<L_SX_AUTH_CHECK>-KID
Table IT_33029[1x4]
FUNCTION-POOL=RSSBRDATA=G_SX_IOBJVL_CHECK-AUTH_CHECK[1]-KID
Table reference: 2052
TABH+ 0(20) = 07000000908D2FD0000000000000000000000000
TABH+ 20(20) = 00000804000081050000000100000004FFFFFFFF
TABH+ 40(16) = 040002F1000003480001432821000000
store = 0x07000000908D2FD0
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 2052 (0x00000804)
label = 33029 (0x00008105)
fill = 1 (0x00000001)
leng = 4 (0x00000004)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000003
occu = 1 (0x00000001)
access = 2 (ItAccessSorted)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 2 (table_line)
cmpMode = 5 (cmpSingle)
occu0 = 0
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000908E0CC8
pghook = 0x0000000000000000
idxPtr = 0x0000000000000000
refCount = 1 (0x00000001)
tstRefCount = 0 (0x00000000)
lineAdmin = 1 (0x00000001)
lineAlloc = 1 (0x00000001)
store_id = 6998 (0x00001B56)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
No. 39 Ty. FORM
Name AUTHORITY_CHECK
I_TH_SFC
Table IT_32090[14x128]
FUNCTION=RSDRC_BASIC_CUBE_DATA_GETDATA=L_TH_SFC
Table reference: 1757
TABH+ 0(20) = 070000009052D8F8070000009081372800000000
TABH+ 20(20) = 000006DD00007D5A0000000E00000080FFFFFFFF
TABH+ 40(16) = 040002DB000017C80010839401000000
store = 0x070000009052D8F8
ext1 = 0x0700000090813728
shmId = 0 (0x00000000)
id = 1757 (0x000006DD)
label = 32090 (0x00007D5A)
fill = 14 (0x0000000E)
leng = 128 (0x00000080)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000099
occu = 16 (0x00000010)
access = 4 (ItAccessHashed)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 3 (user defined)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x0700000090811F18
pghook = 0x0000000000000000
idxPtr = 0x070000009052D950
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 6872 (0x00001AD8)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0700000090813588
hsdir = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
CL_RSO_REPOSITORY=>P_C_BAL_LOG_SUBOBJEC_INST
SY-REPID
SAPLRSDRC
5454554542222222222222222222222222222222
310C234230000000000000000000000000000000
L_S_RANGE-LOW
1ROWCOUNT
354544545222222222222222222222222222222222222222222222222222
12F73F5E4000000000000000000000000000000000000000000000000000
<L_S_SFK>-KYFNM
1ROWCOUNT
354544545222222222222222222222
12F73F5E4000000000000000000000
RSDRC_C_QUERYMODE-CUMULATIVE
C
4
3
S_S_COB_PRO
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
L_SX_SELDR-RANGE+8(8)
Table IT_32110[2x136]
FUNCTION-POOL=RSDRCFORM=AUTHORITY_CHECKDATA=L_SX_SELDR
Table reference: 1902
TABH+ 0(20) = 0700000090813D10000000000000000000000000
TABH+ 20(20) = 0000076E00007D6E0000000200000088FFFFFFFF
TABH+ 40(16) = 040002DB00001AA00010254421000000
store = 0x0700000090813D10
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 1902 (0x0000076E)
label = 32110 (0x00007D6E)
fill = 2 (0x00000002)
leng = 136 (0x00000088)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000112
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 2 (table_line)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000908800F8
pghook = 0x0000000000000000
idxPtr = 0x0000000000000000
refCount = 1 (0x00000001)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 6876 (0x00001ADC)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
L_S_RANGE
IEQ1ROWCOUNT
4453545445452222222222222222222222222222222222222222222222222222222222222222222222222222222222
95112F73F5E40000000000000000000000000000000000000000000000000000000000000000000000000000000000
L_TSX_SELDR
Table IT_32094[13x120]
FUNCTION-POOL=RSDRCFORM=AUTHORITY_CHECKDATA=L_TSX_SELDR
Table reference: 1870
TABH+ 0(20) = 0700000090813AE007000000908DF36800000000
TABH+ 20(20) = 0000074E00007D5E0000000D00000078FFFFFFFF
TABH+ 40(16) = 040002DB000018A8000C4B9C01000000
store = 0x0700000090813AE0
ext1 = 0x07000000908DF368
shmId = 0 (0x00000000)
id = 1870 (0x0000074E)
label = 32094 (0x00007D5E)
fill = 13 (0x0000000D)
leng = 120 (0x00000078)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000103
occu = 12 (0x0000000C)
access = 2 (ItAccessSorted)
idxKind = 1 (ItIndexLinear)
uniKind = 1 (ItUnique)
keyKind = 3 (user defined)
cmpMode = 3 (cmpSingleMcmpU)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x070000009087FB40
pghook = 0x0700000090813D68
idxPtr = 0x0700000090813DA0
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 36 (0x00000024)
lineAlloc = 36 (0x00000024)
store_id = 6875 (0x00001ADB)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x07000000908DED00
hsdir = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
L_SX_SELDR
00001KYFNM ########300 0 ####ÿÿÿÿ#### 0 ######## ####ÿÿ
333334544422222222222222222222222222000000003332223222220000FFFF0000223200000000222222220000FF
00001B96ED00000000000000000000000000000000003000000000000000FFFF0000000000000000000000000000FF
G_RUNNING
0
0000
0000
L_BASICCUBE
ZCTMWMA05
545454433222222222222222222222
A34D7D105000000000000000000000
L_TH_FREE
Table IT_32093[6x30]
FUNCTION-POOL=RSDRCFORM=AUTHORITY_CHECKDATA=L_TH_FREE
Table reference: 1763
TABH+ 0(20) = 0700000090813760000000000000000000000000
TABH+ 20(20) = 000006E300007D5D000000060000001EFFFFFFFF
TABH+ 40(16) = 040002DB00001B800010831401000000
store = 0x0700000090813760
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 1763 (0x000006E3)
label = 32093 (0x00007D5D)
fill = 6 (0x00000006)
leng = 30 (0x0000001E)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000116
occu = 16 (0x00000010)
access = 4 (ItAccessHashed)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 2 (table_line)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000908137B8
pghook = 0x0000000000000000
idxPtr = 0x07000000908139B0
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 6874 (0x00001ADA)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
SYST-REPID
SAPLRSDRC
5454554542222222222222222222222222222222
310C234230000000000000000000000000000000
L_SX_IOBJVL_CHECK
ZCTMWMA05 ####
5454544332222222222222222222222222222222222222222222222222222222222222222222222222222222220000
A34D7D1050000000000000000000000000000000000000000000000000000000000000000000000000000000000000
L_ACTIVITY
03
33
03
SY-UNAME
S51643
533333222222
351643000000
S_MULTICUBE
222222222222222222222222222222
000000000000000000000000000000
E_SUBRC
0
0000
0000
%_VIASELSCR
0
4
S_CHANM
222222222222222222222222222222
000000000000000000000000000000
I_RAISE_EXCEPTION
X
5
8
RS_C_TRUE
X
5
8
SCREEN
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 38 Ty. FORM
Name BASIC_QUERY_DATA_GET_ROLAP
E_T_DATA
Table[initial]
E_END_OF_DATA
2
0
C_FIRST_CALL
X
5
8
S_S_QPARAM
XX 0 ##ÿÿÿÿ####DB-VIEW R ###dABAP-TABLE
25523200FFFF0000442544522222222222222222222222222222222222222222222222520006444525444422222222
08800000FFFF000042D6957000000000000000000000000000000000000000000000002000041210D412C500000000
C_S_QPARAM-AUTHORITY_CHECK
R
5
2
RSDRC_C_AUTHCHK-NONE
2
0
RSJOBINFO
00000000000000 ####
222222222222222222222222222222223333333333333322222222222222222222222222222222220000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RSD_C_DPANM
0REQUID 0CHNGID 0RECORDTP 0IOB
3545544222222222222222222222223444444222222222222222222222223544454552222222222222222222223444
025159400000000000000000000000038E794000000000000000000000000253F244000000000000000000000009F2
SPACE
2
0
I_BASICCUBE
ZCTMWMA05
545454433222222222222222222222
A34D7D105000000000000000000000
I_TH_SFC
Table IT_32090[14x128]
I_TH_SFK
Table IT_32091[2x128]
FUNCTION=RSDRC_BASIC_CUBE_DATA_GETDATA=L_TH_SFK
Table reference: 1767
TABH+ 0(20) = 0700000090887AC00700000090813CD800000000
TABH+ 20(20) = 000006E700007D5B0000000200000080FFFFFFFF
TABH+ 40(16) = 040002DB000018380010839421000000
store = 0x0700000090887AC0
ext1 = 0x0700000090813CD8
shmId = 0 (0x00000000)
id = 1767 (0x000006E7)
label = 32091 (0x00007D5B)
fill = 2 (0x00000002)
leng = 128 (0x00000080)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000101
occu = 16 (0x00000010)
access = 4 (ItAccessHashed)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 3 (user defined)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x0700000090884C90
pghook = 0x0000000000000000
idxPtr = 0x0700000090827A98
refCount = 1 (0x00000001)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 6857 (0x00001AC9)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0700000090813B38
hsdir = 0x0000000000000000Have you check or trace Authorization??
In DUMP:
Information on where terminated
The termination occurred in the ABAP program "SAPLRSSBR" in
"RSSB_AUTHORITY_IOBJVL_CHECK".
The main program was "UPB_PM_CUST_START ". -
Macro Error while executing planning functions or saving data
Dear All,
I am getting following error in BEx Analyzer while executing planning function or pressing a save button.
Note: Excel is 2007 version.
Cannot run the macro "XXXXXX.xlsx". The macro may not be available in this workbook or all macros may be disabled.
I changed the settings in Macro Settings (Office Button -> Excel Options -> Trust Center -> Trust Center Settings-> Macro Settings) eventhough it is showing that above message.
selected ->
Enalble all macros
Trust access to VBA project object model.
If anybody faced this issue kindly reply to this.
Best Regards,
SGHello everybody,
i am facing exactlythe same issue! I am currently running GUI Patch Level 14 and BI Add on Patch Level 10.
I have also adjusted all necessary settings in Excel Options like Activate all Macros and Trust VBA Coding.
Does anybody have another Solution.
As mentioned before Gui Patch 13 and BI Add On Patch 10 obviously arent the solutiuon.
Best regards
Janos -
Account Recievables Extractor and Profit Center
Hi Gurus,
I have a requirement of creating an Aging report ( which i am planning will be based on AR DataSource , 0fi_ar_4).
Now , i have a requirement to show the Profit Center data in this report.
I am not sure how to go ahead with this. If anybody has any suggestions please pass it on.
Regards,
DennisDennis we are going to need some more info on this
Have you got ECC6 segment ledgers set up for AR and does those post the AR side of the posting to the individual profit centres
IF you are not using segment ledgers then because of the way FI documents are posted you CANNOT add profit centre to the report
This is the reason why
Example FI journal
dr Customer 117.50
cr VAT 17.50 default profit centre
cr revenue 50.00 profit centre A
cr revenue 50.00 profit centre B
Now all you have in the AR4 extractor is the 117.50
The way R3 handles this is that you have a special job which posts via 1KEK or 1KES (I forget which) at month end into the PCA ledger the net balance but not aged per profit centre for the AR sub ledger
(this month end job is one of the reasons that PCA is being replaced by segment ledgers in ECC6 - 30 days is too late to produce a "segmented" balance sheet as per the IAS 14 and SoX regulations) anyway....
Unless your process says - there is a 1:1 mapping between each debtor posting and a revenue posting and that revenue posting cannot to be more than 1 profit centre (HIGHLY unlikely)..
then unfortunately you cannot produce the report
Somebody has seriously messed up the FICO config andd esign if they request this at the end of the project and haven't designed segment ledgers to handle this...
(you could have a look at the 0EC_PCA_1 extractors for the PRC4 activity type for the month end postings - but i seriously dount whether the month end PCA jobs are posting document by document - 99% of the time they post by total customer balance and that is not aged)
Sorry!
(note: I have had a similar requirement in one of my past projects - the way I did it was to allocate a customer to a "profit centre" - this I did by utisling one of the user defined fields on the customer master and allocating that customer to that "grouping" - ie not physically a profit centre but some sort of grouping that resembled a profit centre - this of course can only happen if logically you can do this irrsptive of the revenue postings to other "profit centres") -
Cost center and profit center in the same report
I am working on creating a report using report painter/writer. my question is, will it be possible to create a report with cost center group in one column and profit center group in another column and the rows with GL account groups.
I know that GLPCT table dosent have the field KOSTL(cost center) in it. The library I am using is from GLPCT table. But when I checked the characteristics of the library that I am using, it has KOSTL field in it. So I checked that field on and tried to use it in the report. But when I execute the report, an error pops up saying "Characteristic KOSTL cannot be combined with the key figures".
Can someone explain what exactly that error means. and if there is a possible way of using both P.Ctr and C.Ctr in two different colums in the same report.I am asked to create a report which has information of both profit centers and cost centers. some of the fields on columns are cost centers and others are profit centers. This report is basically a P&L summary report for various divisions.
Infact, when I use one basic key figure for cost center and other for profit center and execute the report, it is working!!!!....Is it ok to use two different key figures on two different columns? i dont understand where it is picking the values from..cos cost centers are not present in GLPCT table. -
Can we take Balance sheet and profit & Loss account as per plant & Sales
Hi Team,
Can we take Balance sheet and profit & Loss account as per plant wise & sales office wise also.
Regards
JKMhi jkm
Hi
This can solve your issue could be helpful to you.
Go to this menu path for report painter
Accounting - Financial Accounting -Special Purpose Ledger - Tools - Report Painter - Report Writer - Report Group - Display
T code GR53, GR55
Enter the report group you want for b/s and p/l statement and choose execute and give the report group again and choose execute.
After that give the year, period from to, company code, fiscal year, ledger and plan version 01 and choose execute
Choose in front of the item Production Variances. The system displays the account to which the line items were posted. Material consumption is posted to account OEM Products Consumed.
To call up detailed data, double-click on account
In the dialog box, choose Actual Line Items for Table GLFUNCT, and then choose
To display the original document, simply double-click on it to call up the detailed data. In this case, the original document is a Materials Management document.
You document is listed under the FI-SL document number that you noted in the step Display Goods Issue Document. Select the Doc. info tab and simulate .
Select one of the items relevant for material consumption by double-clicking it. This should be item 002, 004, or 006.
Choose enter go back and cost of sales appear now switch to your first session.
kind regards
Arman
sap fico -
Re: Full Optimize and Lite Optimize Disabled
Hi,
We have an BPC App.
What we need now is that for a particular group of users to have no access to run Full Optimize or Lite Optimize rights to trigger it.
Please can any one advice how to disable this functionality or un authorize this for particular set of users so that they cannot execute any optimization.
Regards.Hi,
Follow below steps:
1. Create a Team and assign users those should have an access for Full and light optimization
2. Goto Manage data>Maintain data management>Manage Packages
-->Select the team which you created in step 1
-->Select add package
--> Choosee process chain as /CPMB/LIGHT_OPTIMIZE
--> Give package name and description
--> Select Taks type as User Package
-->Click Save
3. Create one more package for Full Optimization as expalined in step 2 under same team
Now users who are related to this new team can able to run both Full and light optimizations provided Execute task assigned under task profile.
By following above steps you can assign many package to team and can modify team access from Manage Team user package access if you need.
Hope it helps..
Regards,
Raju -
Differece between SNP Optimizer and Deployment Optimizer
Hi,
Can anyone please list down the difference in the planning method for a deployment optimizer and SNP Optimizer?
Thanks & Regards,
Sanjog MishrikotkarHi Sanjog,
First of all if we understand the difference between SNP Heuristic Planning run which finds the 'Source' of Supply with dates and quantities and Deployment Planning run which CONFIRMs the Supply .... then it is easy to understand the difference between SNP & Deployment Optimizer.
The Optimizer as you know Optimizes based on Costs and Objectively tries to MINIMIZE it. Therefore while the SNP Optimizer finds the most cost effective way of finding the Source of Supply with dates and quantities, identifying where in SC it is better to Store or move the Product, while the Deployment Optimizer generates the Best way to CONFIRM whether the Supply can ACTUALLY be done for the next few days. Deployment precedes the TLB Run which after confirmation we put the Quantities on a Transport Load to build Orders for Execution (Shipping).
Both are Cost based & use the Same Costs Information ... however one Plans and the Other Confirms. During Deployment Optimization run, the Optimizer may decide to confirm the supply from a different source than what the SNP Optimizer planned based on the Available to Deploy Stock Quanties and the Cost of Confirming the Supply. The Deployment Optimizer will apply Fairshare & Push/Pull Rules and looks at the Push and Pull Deployment Horizons which SNP Optimizer cannot. The Difference is also in Planning Time Range. You plan SNP Supply for mid to long term time range. The Deployment looks at Confirming the supply in the next few days from TODAY.
So in short first understand the Difference between a SNP Heuristic and Deployment Heuristic and apply the same principle to a cost based optimization. This should tell you the difference between the two.
Try read this ... First para on Deployment Optimizer ...
http://help.sap.com/saphelp_scm50/helpdata/en/1c/4d7a375f0dbc7fe10000009b38f8cf/frameset.htm
Read the First Paragragraph as well as 'Distribution based on Lowest Costs' section
Hope you find this answer usefull. Reward Points if it is.
Regards,
Ambrish Mathur -
Differences listed between ASCP Optimization and Inventory Optimization ?
Does anyone has a listed readymade document listing the differences between ASCP optimization and Inventory optimization modules.
thx for your help.
thx and rgds,
PankajHi,
As explained IO will recommend time phased Safety stocks it also provides various constraint option, we can make use of it as per our requirement.
In ASCP, following optimization are available:
1. Maximize inventory turns
2. Maximize plan profit
3. Maximize on-time delivery
If you want to use the same optmization in IO, we can fulfill the requirement by available IO constraints say max on-time delivery thro enforce service level constraint.
Hope it will help u.
Tks
M J -
create table m_tables nologging
as select * from dba_all_tables
create table m_objects nologging
as select * from dba_objects
analyze table m_objects compute statistics
analyze table m_tables compute statistics
select /*+ordered use_nl(t,o)*/*
from m_tables t,
m_objects o
where o.owner=t.owner
and o.object_name=t.table_name
and o.object_type='TABLE'
and t.owner='SYSTEM'
Plan hash value: 4144020635
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 64 | 17984 | 16285 (2)| 00:03:16 |
| 1 | NESTED LOOPS | | 64 | 17984 | 16285 (2)| 00:03:16 |
|* 2 | TABLE ACCESS FULL| M_TABLES | 104 | 20280 | 14 (0)| 00:00:01 |
|* 3 | TABLE ACCESS FULL| M_OBJECTS | 1 | 86 | 156 (1)| 00:00:02 |
Predicate Information (identified by operation id):
2 - filter("T"."OWNER"='SYSTEM')
3 - filter("O"."OBJECT_TYPE"='TABLE' AND "O"."OWNER"='SYSTEM' AND
"O"."OBJECT_NAME"="T"."TABLE_NAME")
select /*+use_nl(t,o)*/*
from m_tables t,
m_objects o
where o.owner=t.owner
and o.object_name=t.table_name
and o.object_type='TABLE'
and t.owner='SYSTEM'
Plan hash value: 4245804632
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 64 | 17984 | 934 (1)| 00:00:12 |
| 1 | NESTED LOOPS | | 64 | 17984 | 934 (1)| 00:00:12 |
|* 2 | TABLE ACCESS FULL| M_OBJECTS | 64 | 5504 | 158 (2)| 00:00:02 |
|* 3 | TABLE ACCESS FULL| M_TABLES | 1 | 195 | 12 (0)| 00:00:01 |
Predicate Information (identified by operation id):
2 - filter("O"."OBJECT_TYPE"='TABLE' AND "O"."OWNER"='SYSTEM')
3 - filter("T"."OWNER"='SYSTEM' AND
"O"."OBJECT_NAME"="T"."TABLE_NAME")
I am confusing which the driving table should be:m_tables t?m_objects? are the two pathes executed from above to blow?user649343 wrote:
create table m_tables nologging
as select * from dba_all_tables
create table m_objects nologging
as select * from dba_objects
analyze table m_objects compute statistics
analyze table m_tables compute statistics
select /*+ordered use_nl(t,o)*/*
from m_tables t,
m_objects o
where o.owner=t.owner
and o.object_name=t.table_name
and o.object_type='TABLE'
and t.owner='SYSTEM'
Plan hash value: 4144020635
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 64 | 17984 | 16285 (2)| 00:03:16 |
| 1 | NESTED LOOPS | | 64 | 17984 | 16285 (2)| 00:03:16 |
|* 2 | TABLE ACCESS FULL| M_TABLES | 104 | 20280 | 14 (0)| 00:00:01 |
|* 3 | TABLE ACCESS FULL| M_OBJECTS | 1 | 86 | 156 (1)| 00:00:02 |
Predicate Information (identified by operation id):
2 - filter("T"."OWNER"='SYSTEM')
3 - filter("O"."OBJECT_TYPE"='TABLE' AND "O"."OWNER"='SYSTEM' AND
"O"."OBJECT_NAME"="T"."TABLE_NAME")
select /*+use_nl(t,o)*/*
from m_tables t,
m_objects o
where o.owner=t.owner
and o.object_name=t.table_name
and o.object_type='TABLE'
and t.owner='SYSTEM'
Plan hash value: 4245804632
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 64 | 17984 | 934 (1)| 00:00:12 |
| 1 | NESTED LOOPS | | 64 | 17984 | 934 (1)| 00:00:12 |
|* 2 | TABLE ACCESS FULL| M_OBJECTS | 64 | 5504 | 158 (2)| 00:00:02 |
|* 3 | TABLE ACCESS FULL| M_TABLES | 1 | 195 | 12 (0)| 00:00:01 |
Predicate Information (identified by operation id):
2 - filter("O"."OBJECT_TYPE"='TABLE' AND "O"."OWNER"='SYSTEM')
3 - filter("T"."OWNER"='SYSTEM' AND
"O"."OBJECT_NAME"="T"."TABLE_NAME")
I am confusing which the driving table should be:m_tables t?m_objects? are the two pathes executed from above to blow?optimizer behavior is version specific
do as below so we can know complete Oracle version & OS name.
Post via COPY & PASTE complete results of
SELECT * from v$version;
Maybe you are looking for
-
hi i just bought the macbook pro and i wanted to know how i can transfer all my music on itunes from my old desktop to my new macbook?
-
HI Experts We are using pi 7.1 When we go to IR And ID Using PISUPER , we got the problum the system not entering. What is the problumg ? My Question PISUPER is by defalut user or not ? How to Create a new user for IR and ID And Sld , Rwb With All
-
Loosing music files after updating software to itunes 7.3.2
I recently updated my itunes software, when I went to reopen my itunes all my music was gone. Really! no files existed, can someone help me find where the files went?
-
How do I email groups once I have made them in my address book?
I have created the groups that I need to email to for work. I expect to compose a message and just type in the group name and then all the people's addresses I need will automatically come up. That is not the case. I am running Lion on my Mac Boo
-
Dear Experts, We have some 3rd party vendor from where we purchase FG. And the transaction is like that we give PO to 3rd party. They pack the material as per our BOM provide in mail. Then they supply the material at our stock point and our stock poi