Cannot find Report Builder, what and/or what is it?

Dear OTN,
We have just started using the Oracle Designer Tool and the need for printing out our modeling efforts is eminent. Browsing through the help, we learned that we need a extern tool called "Report Builder" which should exactly do what we need. According to the same help it is supposed to be part of the Oracle Developer program, which we have installed also. But we are unable to find it anywhere, even on your OTN website.
Could you help us out?
John Groebe
Septa Consultancy IT
[email protected]

What computer, OS and iTunes version are you using?

Similar Messages

HT1338 when i click a song in my itunes library it says it cannot find the original file and something told me it was because bonjour is gone off my pc somehow please help what can i do if anything thats 65.3 gigs of my life

when i click a song in my itunes library it says it cannot find the original file and something told me it was because bonjour was gone off my computer somehow idk please help if anyone even can this is 65.3 gigs of my life

What computer, OS and iTunes version are you using?

I bot a TV series from Appstore, erased it from iTunes as I believed it was in iCloud. I cannot find it. What do I do???

I bot a TV series from Appstore, erased it from iTunes as I believed it was in iCloud. I cannot find it. What do I do???

Your TV episodes did not come from the App Store, but from the iTunes Store.
Log into iTunes Store, then check your Purchases.

FRM - 41219 CANNOT FIND REPORT INVALID ID - CALLING REPORT FROM FORM

I am using Developer Suite 10g (forms 9i, reports 9i) . windows XP.
I am using the following code in WHEN-BUTTON-PRESSED-PRESSED trigger in form to call report.
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status varchar2(20);
BEGIN
repid := find_report_object('C:\EMP.RDF');
v_rep := RUN_REPORT_OBJECT(repid);
END;
as as result It is displaying FRM - 41219 CANNOT FIND REPORT INVALID ID.
I have used the EMP.JSP also in find_report_object built-in. But there is no difference.
what could be the reason - plz give the solution.
with thanks
by GMS

Unless you made a mistake and overlooked it, what I suggested should work. Having said that, you did not mention the exact Forms version you are using. There may have been a problem in the version you are using which was corrected in a later release. I tested the example I offered using Forms 10.1.2.3 and it works correctly. Carefully review what you did. Verify that the file actually exists in the file system. Also, I would recommend renaming the file with all lower case letters and referencing it in the form with all lower case letters. Here is the complete code of the form I tested. I will also include the property values from the Report object.
Report1 settings:
Name - REPORT1
Subclass Information -
Comments -
Filename - dummy.rdf
Execution Mode - Batch
Communication Mode - Synchronous
Data Source Data Block - <Null>
Query Name -
Report Destination Type - File
Report Destination Name -
Report Destination Format -
Report Server -
Other Reports Parameters - On the form create the following items in BLOCK1:
Text fields:
<li>SERVERNAME
<li>REPNAME
<li>OTHERPARAMS
Button:
<li>CALL_REP
In the WHEN-BUTTON-PRESSED trigger add this code:
Declare
repid REPORT_OBJECT;
v_rep varchar2(256);
rep_status varchar2(256);
Begin
   repid := find_report_object('REPORT1');
-- Set Report Object properties
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'HTML');
-- Comm mode 1 = SYNCHRONOUS
-- Comm mode 2 = ASYNCHRONOUS
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, 1);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER, :block1.SERVERNAME);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME, :block1.REPNAME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,:block1.otherparams);
SYNCHRONIZE;
-- Run report and get status
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := report_object_status(v_rep);
SYNCHRONIZE;
-- Wait for Reports to generate results
    WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
    LOOP
      rep_status := report_object_status(v_rep);
    END LOOP;
    SYNCHRONIZE;
-- If DESTYPE is appropriate for displaying to user, execute WEB.SHOW ;
    IF rep_status = 'FINISHED' THEN
      WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||:block1.SERVERNAME,'_blank');
    ELSE
      message(rep_status);
    END IF;
END; When you run the form, enter the Report Server name and the Report filename (include the path if you have not configured REPORTS_PATH). Then click on the button. Note that the substr logic may need to be altered slightly if you are using an old version of Forms/Reports.
.

Cannot find report Invalid ID

I am running Oracle10gAS, and running report from form and getting this message "FRM-41219: Cannot find report Invalid ID" The coding is
declare
     repid report_object;
     v_rep varchar2(100);
begin
     repid:=find_report_object('erp_emp_asgn');
     v_rep:=run_report_object(repid);
end ;
I have already set REPORTS_PATH =c:\new_erp;
But still i am getting the same message
Please if somebody can help me.
Thank You

Did you define a Report Object in Forms Builder called 'erp_emp_asgn'?

Cannot start Report Builder

Hi gurus,
I'm currently working on eBs R12. As per subect, I cannot run report builder (Report Builder: Release 10.1.2.0.2).
From a terminal window, I am used to run rwbld60 & command (after setting environment variable and export DISPLAY) but in this case an error message appears saying (more or less) : rwbld command cannot be found.
Any hint ?
Thanks in advance,
Michele

Tnx a lot!!
Now I get the usual REP-300 error.. :-( .. just keeping investigating on this.
Display is set properly.
Any other clues?
Tnx again,
MM

How to find hp build id and feature byte id

how to find hp build id and feature byte id in HP Elitebook 8460p

After debugging SM04, we found somthing below:
Report           RSM04000_ALV
call 'ThUsrInfo' id 'OPCODE' field opcode_list
   id 'TAB' field usr_tabl-sys.
Internal table     usr_tabl

Report Builder 8 and MX7?

Does anyone know if you can generate reports using Report
Builder 8 and have them work in CFMX 7? There are times when I'll
need to work in MX7 still and would rather not have to make two
copies of a report to work in the different environments. Also
Report Builder 8 seems so much more stable than Report Builder
7.

Hi Asam,
If we want to create a parameter depend on another dataset, we can additional create or add the dataset, embedded or shared, that has a query that contains query variables. Then use the option that “Get values from a
query” to get available values. For more details, please see:http://msdn.microsoft.com/en-us/library/dd283107.aspx
http://msdn.microsoft.com/en-us/library/dd220464.aspx
As to the Report Builder features, we can refer to the following articles:http://technet.microsoft.com/en-us/library/hh213578.aspx
http://technet.microsoft.com/en-us/library/hh965699.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Purchased photoshop elements 12 and premiere elements 12. downloaded and installed photoshop elements12 but cannot find how to download and install premiere elements 12

After I purchased pselements 12 and premiere elements 12 I downloaded and installed pselements 12 but I cannot find how to download and install premiere elements 12 because that window has disappeared and I can't get back to it. How do I download and install premiere elements 12? where is it? how can I find it?

rachif
I am assuming that the purchase and download is from Adobe. You should find the information that you seek under My Orders at http://www.adobe.com after you sign in (as per John's link).
However, if you have difficulties in going that route, please contact Adobe via Adobe Chat to discuss your order under the topic of Orders, Refunds, and Exchanges. To do that, click on the following link, and, when it opens, make sure that the topic is set at "Orders, Refunds, and Exchanges", click on the statement "Still need help? Contact us." to bring up the Adobe Chat.
Contact Customer Care
Please let us know the outcome.
Thank you.
ATR

HT1178 I have set up Time Capsule to use with Time Machine. When I open Time Machine it 'cannot find' the Time Capsule and I have the Select the Disk each time. In the Next Backup tab it always says "When disk is connected" even though the disk is alrea

I have set up Time Capsule to use with Time Machine but when I open Time Machine it 'cannot find' the Time Capsule and I have to 'Select the Disk' each time. In the Next Backup tab it always says "When disk is connected" even though the disk is already connected.

Your pro doesn't matter.. I presume it is happily working.
Your imac setup has got messed up because you changed from a local (my book being USB type I presume) to network drive. Did you do a clean install of Lion?
Did you use the backup from the Pro on the imac? Otherwise I don't see how the Pro shows up in use previous disk. Where is Pondini when you need him??
You cannot download Time Machine as an App and replace the current version. It is built into the OS.. the only way to do it is a clean install. Unfortunately that might be the only way around the issue.
There is a number of issues that Pondini has covered in the setup issues of troubleshooting.
This is the most relevant I think. http://pondini.org/TM/B6.html
But look at the whole section B setup problems.
http://pondini.org/TM/Troubleshooting.html
If it was me, I would store all the info you need.. not using TM but using a straight copy of files.
Then clean install Lion. I doubt any of these issues would exist if you had not installed Lion over existing setup or used a different backup.
See if you can get Pondini to respond.. !!

HT201272 I made two software purchases back in early 2012 and they are not showing up in my purchase history. I want the software on my new laptop and I cannot find it. What do I do?

I'm not finding software I purchased in my purchase history. Can anyone help lead me to where to find it. I have the software on my IMac and want to install it on my new laptop. I cannot find it? Help!
Thanks,
Chad

If they are iOS apps and you are signed into your computer's iTunes with the same account that you originally bought them with then they should show in the Purchased link under Quicklinks on the right-hand side of the iTunes store home page.
If they are Mac apps bought from the Mac App Store and you are signed in with the same account, then they should show under the Purchases tab in the Mac App Store.

HT3204 My iTunes cannot find my wireless network and I get erros saying I am not connected to a network. What is the best way to resove this issue?

Getting error message: iTunes couldnot connect to the iTunes Store. An unknown error occurred (0x80092013) Make sure your network connection is active and try again. Obviously my network is active, or I would not be able use my internet connection to enter this community. I have a Telus TwoWire Wireless modem. I used the iTunes for Windows: Network Connectivity Tests and found that it was finding my adaptors, but could not connect to my Wireless network. can someone provide a method for iTunes to recognize my wireless network. I can find lots of info on connecting to a WiFi iDevice, but nothing so far about setting up iTunes with my wireless info. iTunes does not have seek network function in the settings, or at least I cannot find one.
Thank you.

Hi MeMiri,
Welcome to the Support Communities!
The article below will walk you through the troubleshooting steps for connectivity issues with iTunes:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
I hope this information helps ....
Happy Holidays!
- Judy

Cannot set up Time Machine because Airport Utility cannot find it. What do I do now?

Sorry, I meant to say Airport Utility cannot find Time Capsule. The TC is not listed as an available drive in the TM setings panel. Trying to set up a MBP. iMac TM settings panel lists TC but if I search for it from either machine, iMac or MBP it is not found. Repeated rescanning doesn't find it. Also trid Airport Utility from iPad and iPhone, still not found. When I first purchased it I set it all up so I have logged into it before. That was a couple of months ago, now I've got around to setting up TM I can't access it. It is continuing to provide my wireless network though.

OK, turned off all devices, pulled the plug out of the TC, waited then plugged back in. Started everything up again and Airport Utility can now find the TC.
Thanks to you both for trying to help. Next time I'll try this first but it didn't seem like a very elegant Apple solution to the problem.

SSRS 2013 Native Mode - Cannot See Report Builder Button after Installing on my Desktop Computer - SQL Server Express

I have installed SQL Server Express 2013 on my home PC, which runs Windows 7. I used the advanced installation, which includes Reporting Services. The install seemed to go okay but when I open SSRS, I cannot see the Report Builder button on the
screen. I have spent a lot of time trying to figure this out, including installing and reinstalling the program. I am not sure what I am doing wrong. Also, I cannot connect to the report server through SQL Server Management Studio.
If anyone has any straightforward assistance, it would be greatly appreciated. I have spent a lot of time looking for answers. In the meanwhile I'll continue seeing if I can get this to work.

Hello,
See
Features Supported by Reporting Services in SQL Server Express => Unsupported Features:
Ad hoc reporting through semantic models and Report Builder is not supported.
But you can try to install & use the Report Builder as stand-alone Installation; you can get it here:
Microsoft® SQL Server® 2012 Report Builder
Olaf Helper
[ Blog] [ Xing] [ MVP]

Report Builder Wizard and Parameter Creation with values from other data source e.g. data set or views for non-IT users or Business Analysts

Hi,
"Report Builder is a report authoring environment for business users who prefer to work in the Microsoft Office environment.
You work with one report at a time. You can modify a published report directly from a report server. You can quickly build a report by adding items from the Report Part Gallery provided by report designers from your organization." - As mentioned
on TechNet.
I wonder how a non-technical business analyst can use Report Builder 3 to create ad-hoc reports/analysis with list of parameters based on other data sets.
Do they need to learn TSQL or how to add and link parameter in Report Builder? then How they can add parameter into a report. Not sure what i am missing from whole idea behind Report builder then?
I have SQL Server 2012 STD and Report Builder 3.0 and want to train non-technical users to create reports as per their need without asking to IT department.
Everything seems simple and working except parameters with list of values e.g. Sales year List, Sales Month List, Gender etc. etc.
So how they can configure parameters based on Other data sets?
Workaround in my mind is to create a report with most of columns and add most frequent parameters based on other data sets and then non-technical user modify that report according to their needs but that way its still restricting users to
a set of defined reports?
I want functionality like "Excel Power view parameters" into report builder which is driven from source data and which is only available Excel 2013 onward which most of people don't have yet.
So how to use Report Builder. Any other thoughts or workaround or guide me the purpose of Report Builder, please let me know.
Many thanks and Kind Regards,
For quick review of new features, try virtual labs: http://msdn.microsoft.com/en-us/aa570323

Hi Asam,
If we want to create a parameter depend on another dataset, we can additional create or add the dataset, embedded or shared, that has a query that contains query variables. Then use the option that “Get values from a
query” to get available values. For more details, please see:http://msdn.microsoft.com/en-us/library/dd283107.aspx
http://msdn.microsoft.com/en-us/library/dd220464.aspx
As to the Report Builder features, we can refer to the following articles:http://technet.microsoft.com/en-us/library/hh213578.aspx
http://technet.microsoft.com/en-us/library/hh965699.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Cannot find Report Builder, what and/or what is it?

Similar Messages

Maybe you are looking for