Cannot get camera to work for the first time.

I cannot get the camera to work . I have the IPad2 and just tried to use it this week. Have tried turning on &off and nothing is working. The video will not come on either. Any ideas.

Have you tried closing the Camera app completely and seeing if it works when you re-open the app ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset (if that wasn't what you meant by turning the iPad off and on) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

Can not get JSP to work for the first time.

This is my first attempt to write JSPs. When TOMCAT attempts to render my first java server page TOMCAT reports the following two errors:
org.apache.jasper.JasperException: Unable to compile class for JSPerror: Invalid class file format in C:\j2sdk1.4.0_01\jre\lib\rt.jar(java/lang/Object.class). The major.minor version '48.0' is too recent for this tool to understand.
C:\Program Files\Apache Tomcat 4.0\work\Standalone\localhost\JobEntry\HeadingExample$jsp.java:0: Class java.lang.Object not found in class javax.servlet.GenericServlet.
package org.apache.jsp;
I am on an XP box, running jwsdp-1_0_01, j2sdk1.4.0_01, and TOMCAT 4.04.

You might want to try downloading a newer Tomcat Version 4.1.18 works well. Follow the URL below. I have tried this version with the SDK 1.4 in the past, without problems. It might be that your older version of Tomcat just doesn't like the 1.4 SDK. Would take 5 minutes max on a decent http connection to DL and install.
http://jakarta.apache.org/site/binindex.cgi

HT1349 I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

The warranty is only good in the U.S.
You woulod have to send it to someone in the U.S. They could take it in and if it is defective, then it would be replaced.

My PC thinks my new ipad2 is a camera when syncing for the first time - any suggestions - I have updated the latest Itunes version 10.5 and rebooted by PC and still a problem

By new Ipad 2 wont sync for the first time to my pc - I have rebooted my pc and updated itunes with version 10.5 - my pc thinks my ipad 2 is a camera - very frustrating any suggestions?

Itis normal and expected for the compuer to see the iPod as a camera. That is how you get phots taken and saved to the iPod off the iPod. To get iTunes to see the iPod:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Getting error while synchronising for the first time to get Device ID

Hi All,
When I am trying to synchronise for the first time to get device ID I am getting following error.
Could any body through some light on this please.
Synchronization started
Connection set up (without proxy) to: http://XYZ:portno/meSync/servlet/meSync?~sysid=MOB&
Connection to server failed.
Synchronisation problems: Transport-layer (http) sync exception raised (root cause: Exception while synchronizing (java.io.IOException: Not in GZIP format))
Regards,
Ameer Baba.

Hi,
please let us know what patch level your middleware is running on.
The mobileengine.config file is placed in the MI client installation directory in subfolder settings. On PC it is in
c:\Program files\Sap Mobile Infrastructure\settings.
From the URL you mentioned above you are using the "old" technology. Please go the service.sap.com/instguides and follow the setup guid for the old technology.
When you enter the URL directly into the browser you should get a LOGON popup. This shows the service is running. I would expect that you do not get this popup due to missing setup.
If you want to use the new sync service in SICF and you have configured this. have a look into the manual. In that case you are missing some settings on the MI client. The problem is, that the old MI client uses old sync service by default.
Regards,
Oliver

WPS54GU2 printing to parallel printer with Windows 7 64-bit-cannot get it to work for the life of me

Hello,
I am having the worst difficulties getting the WPS54GU2 to print to a HP Laserjet 4L printer. I know that the general communication is working as I am able to print a test page from the
I have the IP address correct for the print server (in my case it is 192.168.1.103) and is set statically in the print server setup.
I have it working fine on an XP box The port name configured on the XP machine is LK89A0B5_P1.
The software that comes with the WPS print server will not install on Windows 7 so the address/port/queue must
be set up manually.
I have tried the link from Cisco's KB that shows how to configure the print sever:
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=69efd80e2ea44d948fea2365d3e0c9eb_Configuring_TCP_I...
however this does not work and the print job either gets stuck in the print queue, or it shows busy/error in the print queue.
I have also tried suggestions on this forum that say not to create a TCP/IP port but instead use LPR port.
Can someone please give me the solution that will work. I have heard people say to use L1 for the queue name, or P1, or LP1
or lp1. I cannot spend much more time on this before I give up and look for a different print server that will work with both parallel and USB printers.
Thanks for help/suggestions on this.
Mike

sometimes it needs the device- specific drivers to get it to work; especially that you have a 64- bit OS.
the print server is already connected to the network, right? what is its IP address? check if the computer can ping that IP by going to start> search> cmd> ping 192.168.1.78 (change this to the correct IP address). if your computer can ping the print server then you can setup LPR printing to get your printing jobs done. click on the link below for more info.
Setting up LPR Printing on Windows 7

TS1687 I am trying to get a paid app for the first time but it tells me I need to enter additional security infirmation. I enter the 3 secret questions etc then click done but nothing happens.

Hi guys I've just got my first iTunes card and am trying to get a paid app but after I enter the password it says that I have to enter additional security information do I entered my 3 secret questions and answers, my rescue email and birth year then I click done but nothing happens. Can anyone help?

Hi massmercury,
I want to apologize for your experience here with the service center. I am moving forward to have your case escalated for further review. Please see my private message. I will be your point of contact until our Customer Advocate team reaches out to you.
Best regards,
Bgriffin2
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HT1338 Problems of getting Windows installed successfully for the first time...

My brand new hardware of Apple imac desktop OS X Mavericks serial no: C0*******8J5 is having a problem of installing Windows 8.1 despite I downloaded many bootcamp and other updates of software as advised by my Singapore Apple specialists. Can you provide me good links of what I should do because I am still struggling for almost one month already?
<Personal Information Edited by Host>

http://www.apple.com/support/bootcamp/

For the first time, I'm trying to use adobe premiere elements10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or

For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone

mike frischenmeyer
What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
know the details and troubleshoot to determined what caused the problem.
1. Can you open a new project?
2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
for that project?
3. Please review the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
4. What are the steps that you are using to reopen this saved closed project.
a. File Menu/Open Project/Name of Project
b. Other
Please review and consider and then we can decide what next based on your further details and results..
Thank you.
ATR

Why won't my camera work? I used the screen shot for the first time and since i did that every time i take a picture the shutter closes as though it's taking it but no picture gets taken...help! Any suggestions?

Why won't my camera work? I used the screen shot for the first time and since i did that every time i take a picture the shutter closes as though it's taking it but no picture gets taken...help! Any suggestions?

Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David

I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note. I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds. I can't get rid of it. I have

I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note. I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds. I can't get rid of it. I have tried to clear out the iMessage settings I had put in, and I've tried to adjust the Accounts to not include notes to synch. But, Notes will not stop. It opens a new note, and even if you ignore it, it assumes preference every 5 seconds, and the Mac is impossible to use.

Do you have any Boot Camp or other secondary partitions set up on your system? If so then try running a disk verification routine (chkdsk, etc.) in Windows to repair the disk. While I've not heard of it happening recently, in the past errors in these partitions have resulted in stubborn ghost files appearing in OS X.

When connecting my iphone 4 to itunes for the first time i get the following message "cannot connect to this device because Apple Mobile Service is not started" what does this mean and how do I solve it?

when connecting my iphone 4 to itunes for the first time i get the following message "cannot connect to this device because Apple Mobile Service is not started" what does this mean and how do I solve it?

I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

After Photoshop Elements quit working for the second time in three months, I uninstalled it and now cannot get it to reinstall from the disc. Nothing happens when I insert the disc. All I can do is look at the folders and files and see nothing that tells

After Photoshop Elements quit working for the second time in three months, I uninstalled it and now cannot get it to reinstall from the disc. Nothing happens when I insert the disc. All I can do is look at the folders and files and see nothing that tells me how to start the installation. Clicking "open with Auto play" gives me irrelevant options, view photos, share, etc. I'm running Windows 8. This program has worked, although buggy, for the past year.

reinstall by clicking setup on your disk or downloading and installing,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I have a Macbook pro that I bought in 2008. I recently installed Maverick. For the first time, I used headphones. Now I cannot get sound without them.

I have a Macbook Pro that I bought in 2008. A few months ago I installed OS 10.9.1. A couple of days ago I used headphones for the first time ever. Now I cannot get sound without them. Help?

Hi, lolabev.
You may find the troubleshooting steps in the article below helpful.
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
Cheers,
Jason H.

When creating a custom default user profile for an image, I get the error "A keychain cannot be found to store "safari" when a new user logs in for the first time.

My "profile" account works flawlessly with the exception of safari. I had copied the entire user template folder to the default location in OS X 10.10 and removed the entire keychain folder. However, whenever someone logs into the computer for the first time and opens Safari, they are greeted with the error message "A keychain cannot be found to store safari".

If you've just changed your login password in Recovery mode, follow these instructions. Otherwise, see below.
At some point, you may have reset your keychain to default in Keychain Access. That action would have caused your login keychain to be renamed.
Back up all data before proceeding.
In Keychain Access, delete the login keychain from the keychain list. Choose Delete References when prompted, not Delete References & Files.
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
~/Library/Keychains
In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V), and press return. A folder will open. Rename the file "login.keychain" in that folder to something like "login-old.keychain". Rename the file "login_renamed_1.keychain" to "login.keychain". You can then close the folder.
Back in Keychain Access, select
File ▹ Add Keychain...
from the menu bar. Add back the file now named "login.keychain". If any of your needed keychain items are missing from it, also add back the file you named "login-old.keychain". I suggest you transfer any needed items from that keychain to the login keychain, then delete it. The transfers are made by drag-and-drop in Keychain Access. You'll need to enter your password for each item transferred.

Cannot get camera to work for the first time.

Similar Messages

Maybe you are looking for