Cannot get FLV transparency using iFrame

Hi
I need some advise... I can get transparency in Firefox, Safari, and Chrome, but not in IE.
I have used wmode=transparent in a dozen different ways, read a dozen online advise places but nothing, if you check out my site with safari and then use IE you will see what I mean. Could iweb be writing some code that screws this up?
any info helpful, thanks, using iweb '08

Certainly, but that's exactly the problem. About half the users of the internet still browse with IE for probably no other reason than being used to. Reason also, why we have to come up with workarounds or simply do without the elements we wanted to incorporate, because every one in two users will not be able to enjoy our sites. Reason on top of all, why we often need to have an extra browser alongside Safari to view the sites that were specifically written for IE with utter disregard and disdain for other browser (you know, the other half of the world).
Ah well, you got to love the globalization…

Similar Messages

  • I cannot get to or use my home pc for a while and am staying with a friend for the foreseeable and am using their pc to write this. How do I access my itunes account on their pc. Thanks Karen

    I cannot get to or use my home pc for some time and am staying at a firends and using their pc to write this. I need to access my itunes account and music on their pc. How do I do this. Thanks

    An easy route would be to use the iTunes Match service such that all your Songs are available anywhere over the internet via iCloud.  Once complete you can create an account on your friends PC, download iTunes and sign-in to the iTunes Store with your Apple Id, start iTunes Match and it will provide access to all your Songs.
    Not quite so good, is simply to follow the steps on your friends PC as above, however, instead of iTunes Match simply access the 'purchased' songs area from the iTunes Store home page that will give you access to all your purchases without iTunes Match.
    IMPORTANT:  Apple only like to see a single Apple Id associated with one device - so if your friend already has an active Apple Id account on the PC, it would be wise to use an alternate machine.  Apple has a 90 day lock out associated with switching Apple Ids on a common device.

  • 5130 cannot get phone connection, using as modem

    Recently purchased 5130 to use as modem for my laptop.  Am using sim card from primary phone to access internet (primary phone has internet service), and connection with USB cable.  Downloaded PC suite, have Vista OS.  Have set specs to phone and internet provider (AT&T) but cannot get connection.  Error display says cannot get phone connection.  Phone works in phone mode, although cannot see contacts.
    ( I have a new bluetooth USB adaptor, but do not want to open package if I can get cable to work.  No point in opening blue tooth yet as cannot even get phone connection.)
    Any advice? 

    Hello, dthurnherr.
    Thank you for visiting Apple Support Communities.
    Here are a couple troubleshooting articles that I would recommend going through when experiencing this issue.
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/ts4185
    Unable to make or receive FaceTime calls after April 16, 2014
    http://support.apple.com/kb/TS5419
    Cheers,
    Jason H.

  • Cannot get printer online using airport express-totally confused right now.

    Well, I got my airport express up and running. My iMac is in one room and the airport and the printer are in the other room (it is a second printer). My first printer is connected to my iMac via USB.
    Cannot, for the life of me, get the printer in the other room, online, using airport. What am I doing wrong? I am clueless when it comes to these things, so it is probably something simple (and yes, the power in plugged in and on, lol).
    I went to System Preferences>Print & Fax and it shows the printer OFFLINE, DEFAULT, but I am lost from here.
    Thanks!!

    I'm suffering from the same problem. Printer is HP Color Laserjet 2600n with driver 1.3.1, MAC OSX 10.6.1. Setup is airport extreme as router and gateway + airport express as wireless connection for the printer. Following the airport express help doesn't help. Next test is to check whether the printer work as a network printer when connected to the airport extreme station directly. Keep you updated on the progress.

  • Cannot get encoding correct using ABAP XML

    I need to transform data using ABAP transforms and the DOM.
    I'm expecting to get a string like this out of the DOM tree when I call IF_IXML_NODE->GET_VALUE( ):
    Jukan testityö
    Instead I get:
    Jukan testityA¶
    (This is finnish).
    The inbound XML is UTF-8 encoded, and the text is fine when browsing.
    I have two issues:
    1) When I call CALL TRANSFORM and my xslt code has <xsl:output encoding="utf-8"/>, it works with the XSLT_TOOL in test mode and sets the encoding for the transformed XML as UTF-8. However, when I call CALL TRANSFORM in the program, the encoding of the transformed file is "iso-8859-1". I cannot change the encoding, even if using CALL TRANSFORMATION with OPTIONS xml_header = 'full'. How can I do that?
    I have tried to use the SET_ENCODING methods of the if_ixml_istream and if_ixml_document objects like this:
    l_encoding = l_ixml->create_encoding( byte_order ='1', character:_set = 'utf-8' ).
    l_istream->set_encoding( encoding = l_encoding ).
    and this still does not work.
    Any idea how I can correctly render my xml to correctly display finnish characters?
    BR,
    Tony.

    Ever managed to get this done?
    Tried "UTF-8" in capitals?
    Ciao
    Alex

  • Cannot get web service using 2-way SSL to work

    WebLogic 8.1 sp4, using jdk 1.4.2_05 within BEA install dir (not JRockit). Also using WLWorkshop.
    I'm trying to call a web service provided by a third-party requiring 2-way SSL; The third-party provided a server cert to trust and a key/cert to use from our client. After updating my key and trust stores, I'm able to run this with no problem from another web service test product (CapeClear).
    How does one do this from WLS? I did the following (nothing has worked):
    - Started my WLS server; using the console, updated the Configuration|Keystores & SSL section and restarted - the console output indicates that all loaded correctly. I also changed the option on Two Way Client Cert Behavior to 'Client Certs Requested and Enforced'.
    - Updated my setDomainEnv.cmd to include the following options -Dweblogic.security.SSL.ignoreHostnameVerify=true -Dweblogic.security.SSL.enforceConstraints=off; I also added the -Dssl.debug=true -Dweblogic.StdoutDebugEnabled=true options.
    - Within Workshop, created my web service control from the provided WSDL and generated a test JPF; when I run the test, I get an exception related to an invalid content type (text\html). This occurs because the client-side SSL piece did not take place and the client was presented with a login-page rather than a web-service XML result.
    - I updated the JDK security jars with domestic strength algorithms; no change in behavior.
    - No SSL errors in the debug trace (I can provide log upon request).
    What other parameter and/or setting do I need to update to get this to work?
    Any help would be tremendously appreciated.
    Thanks,
    Rick

    I too am struggling with SSL but I was given some help by BEA. This does not help me since It seems like the proxy jar I download from the WS Home Page wants to go directly to the JPD not the jws. This example of two way SSL should work for you. I am including the Main class but not the generated files it refers to. I don't know how to attach files to the news groups. The key thing it to make use of the adapters. The Impl and Port are part of the downloaded proxy.
    public static void main(String[] args) throws Exception {
    // set weblogic ServiceFactory
    System.setProperty("javax.xml.rpc.ServiceFactory", "weblogic.webservice.core.rpc.ServiceFactoryImpl");
    // set weblogic client protocol handler
    System.setProperty("java.protocol.handler.pkgs", "weblogic.webservice.client");
    // set the SSL adapter
    SSLAdapterFactory adapterFactory = SSLAdapterFactory.getDefaultFactory();
    WLSSLAdapter adapter = (WLSSLAdapter) adapterFactory.getSSLAdapter();
    // two-way SSL you must loadLocalIdentity to provide certs back to the server
    FileInputStream clientCredentialFile = new FileInputStream ("./client/clientcred.pem");
    String pwd = "canpass";
    adapter.loadLocalIdentity(clientCredentialFile, pwd.toCharArray());
    adapter.setVerbose(true);
    adapter.setTrustedCertificatesFile("./config/ca1024.pem");
    adapter.setStrictChecking(false);
    adapterFactory.setDefaultAdapter(adapter);
    adapterFactory.setUseDefaultAdapter(true);
    String a = null;
    if (args.length < 1) {
    a = "Sample String";
    } else {
    a = args[0];
    ToUpper_Impl lookup = new ToUpper_Impl();
    ToUpperPort value = lookup.gettoUpperPort();
    String result = value.toUpper(a);
    System.out.println(result);
    }

  • Cannot get into BIOS using F1 or Enter

    I'm at a complete loss here. Brand new T430. I changed the settings in BIOS to UEFI and installed Windows 7 x64 successfully. But I can no longer get into the BIOS. F1, F12, Enter nothing works.
    Please help!
    Thanks much!!
    Solved!
    Go to Solution.

    Hi someotherguy,
    Can you help me with this problem?
    I hit enter to stop the normal boot and then appear a window to select different options:
    - F1: Enter BIOS
    - Another one I don't remember
    - F12: Select bootable device
    Any of the menus I've tryied to enter I got a message afterwards saying:
    "Intel Boot Agent GE v1.3.81
    PXE 2.1 Build 091 WfM 2.0)"
    And just stays there. Nothing happens.
    After pressing F1 or F12 or other, I got a small message saying press CTRL+S to enter the setup menu. If I press it, I enter in a menu just to change the amount of time that message appear and if I want it or not.
    Can you help me?
    I need to activate the virtualization on the BIOS in order to setup virtual machines!

  • Cannot get itunes to use external hd as primary hd

    PLEASE Help me
    i lost all my music because i thought everything was peachy and it wasnt. i tried to change my prefferences to read only from my external lacie hd. but that didnt work and i ended up loosing all my music if some one could please help me out to get this working that would be awsome. because i wanna start ripping my dvds on here as well for my apple tv and im scred im gonna end up needing a bigger computer or something PLEASE HELP

    Hi, Lars -<menu>"..but is it safe to delete everything from my internal HD now.."</menu>Assuming you've been able to boot from the external, it's probably safe.
    You might want to consider leaving the OS in place on both disks, though. I've found it very convenient to be able to boot from the other disk when something goes wrong with the OS I normally run - much more convenient than rummaging for removable bootable media.

  • Cannot get N71 to use the WLAN

    My E71 finds my WLAN but when I go to the internet it doesn't use the WLAN. How can I force it to use the Lan when  such is available?

    Well, first off change your title. The n71 does not have WLAN. In the E71 on the other hand, once you have detected the WLAN access point, you should connect to it first by selecting it and choosing "connect". Once that is done, internet would be accessed through the WLAN.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Cannot get MacPro to allow me to boot to an alternative boot disk. Can choose in control panel but will not use the disk to boot. Also won't boot using disk selected using option key

    My primary boot disk is encrypted as is a secondary boot disk (backup) but I cannot boot using any other disk. System 10.8.5, MacPro 4.1.
    All disks mount using primary boot disk. All disks check out as OK and I have repaired permissions.
    When I choose in the control panel the Mac boots but will always use my original boot disk.
    When I select the disk using the option key at startup, the boot process stalls with a grey screen and a spinning cursor.
    Thanks,
    Dave

    Still trying to figure this out. I erased the drive, did a format using disk util and then re-installed the system but I still cannot get the disk used as a startup drive. I also tried an external firewire drive and it won't allow me to boot from it either.
    I can choose it starting up with the option key but it just gives me a blue screen and the spinning cursor.
    If I select it in the startup pref pane it boots into my other startup drive only.
    DaveLon

  • Hello. I am running the newest version of itunes on my PC. everytime I try to copy a cd to itunes it gives me an error message that says I do not have write access for my itunes media folder or a folder within it. I cannot get this resolved.

    Hello. I am running the newest version of itunes on my PC. everytime I try to copy a cd to itunes it gives me an error message that says I do not have write access for my itunes media folder or a folder within it. I cannot get this resolved using the solution given on the error message. I have been using itunes for 4 years and have never encountered this problem until yesterday. Help would be greatly appreciated.

    Quit iTunes.
    Go to My Music folder.
    Select the iTunes folder, right click > Properties.
    Click the Security tab and make sure you have full Read/Write privileges.

  • I cannot get email when I leave my house. Why

    I cannot get emails or use SIRI when I leave my house. Why?

    You are probably not connected to wifi. If you want to, you can sign up for 3g through Apple (I believe) or your mobile carrier. Hope this helps!

  • I use a Mac, new to lightroom, I purchased the software, and now I cannot get into my develop module because it is telling me that I need to renew my membership ?  Lost !!!  lost in a dark cold cave of lightroom someone please help me !!

    I cannot get into my develop module on lightroom, it is telling me to "please renew my membershipto reactivate the develop module"  I do not understand.  I bought the software must I pay a membership as well ?  Also I do not want to use lightroom mobile and it is trying to sync my photos.  I use a MAC

    Did you purchased the Full Perpetual License from Adobe for $149.00?, if so then what has happened is that you probably downloaded the Creative Cloud trial version which has now expired.
    The license key for the perpetual version will not be accepted to activate the CC version.
    Uninstall the existing Lightroom and then download the one available from the link below. The uninstall process will not affect your Catalog, Preferences or personal files but will just remove the application. Install the new download and you license key will be accepted.
    Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.6
    If this is not the situation you face then provide some more details.

  • I have a packardbell laptop with photoshop elements 8 installed from new. I have used it on several occasions but I cannot get it to run now.  When I open a photo using elements the Adobe box pops up saying that the programme has unexpectedley quit? can a

    I have a packardbell laptop with photoshop elements 8 installed from new. I have used it on several occasions but I cannot get it to run now.  When I open a photo using elements the Adobe box pops up saying that the programme has unexpectedley quit? can anyone help me please as I have several photos to edit before the end of this month. Many thanks for any help

    The "restore disk" is built into the Mac. See About Recovery.
    Need more specifics about what error messages you got while installing Adobe Flash.
    However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
    Click the Try something new! link at the bottom of the YouTube page.
    I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

  • Cannot get or send mail using Apple Mail on iPhone and iPad

    Everyone in my household cannot get or send mail on their Apple Mail for iPad and iPhone. We all get the same message: "The user name or password for [account] is incorrect." This just started happening yesterday afternoon. No problems before that. I called my hosting company and Apple, and both blamed the other. My Apple system is always updated, so I have the latest version of Maverick. Had no problems with it up until now.
    However, I awoke this morning to find downloaded emails in the same program, but when I go to "get mail," it says the same thing, and still won't allow me to send or receive.
    Here's the kicker. I also use Gmail with the exact same accounts (yes, I need both since Apple Mail does things that Gmail doesn't, and vice versa). No problem! I get all my emails and can send with no problem. So, my hosting company claims it can't be them (makes sense). It only happens using Apple Mail, and I have several email addresses. None of them work (other than the strange phenomena of suddenly getting some of them downloaded for no apparent reason).
    What do I do from here? I've changed passwords, deleted and tried to set up my emails, only to get the message that they probably will not work. And they don't. I have shut down and restarted my iPad and iPhone, to no avail.
    Thank god for my Gmail account, or my business would be closed.
    Again, this is happening on four devices in my home: 2 iPads and 2 iPhones.

    I have a comcast account I use on my phone and use it for receiving and sending mail. When you look at the account in settings, you need to check each of these
    incoming mail server: mail.comcast.net
    username: the part of your email address before the @
    password: your password
    outgoing mail server: smtp.comcast.net
    Under Advanced
    Use SSL: On
    Authentication: Password
    Server Port: 995
    If you cannot make it work from changing settings in the account, delete the account and start over. Use the "Other" setting when starting the account. It is a POP3 account and make the entries I gave you. Once you do that, it should check the entries and validate the account. You shouldn't have any trouble from there. Those settings will work from either the iPhone on cell, or wireless. Mine will even work when I'm at home on my wireless there, which is on the Comcast network.
    Hope that helps you.

Maybe you are looking for