Cannot get more than 8 item in list component

Hi,
I can't get more than 8 items in list component using getItemAt(), it returns null. I will search more for this but no result.
Please Help me here to move to next step.
Thanks
Sureshkumar G

If you're asking if you can overall, yes you can:
http://help.adobe.com/en_US/as3/components/WS5b3ccc516d4fbf351e63e3d118a9c65b32-7f41.html
If you're asking if you can do this in the same context, off-screen, no you still get the same error as the .enabled property.
I hate to throw a hunch but I feel as though Adobe is employing something I'm used to in native iOS programming (Apple Devices). In lists they have something called "dequeue". It's the reason an extremely long list scrolls smoothly. What it does is render ONLY the rows that are in view. When a row is about to scroll off view it deallocates it from memory and then recreates the next row. They do this so you only ever have the current amount of viewable rows in memory and it speeds up scrolling. Although, I can make property changes to items in an iOS list that's off-screen so they don't have this issue ;(. Just food for thought.
I'd submit it to the bugbase and see what Adobe states. They may say they intend you to get the item in view, alter it and then go back to your previous position. That would be silly but at most I can tell you I definitely get errors trying to access an element outside my view. They're probably not used to items needing visual toggles when you can't even see them.
edit:
On a further note I tried the scrollToIndex() method, tried to disable, that much worked fine. The second I then scrolled back to the previously selected index the list screwed up.
I even daisy chained functions a second apart (30 frames worth of wait). I scrolled down and that worked so I waited 1 second. I disabled the visible item I wanted to and that worked so I waited another second. I scrollToIndex(0) to get back to the top of the list, the list blew up. Random items (several items) were disabled and the one that I explicitly disabled was enabled.

Similar Messages

I cannot get more than 12 to 14 hours out of a full charge, and with a new battery. Is the phone dying?

I cannot get more than 12 to 14 hours out of a full charge, and with a new battery. The battery has been charged at least a dozen times, so I know it's at full charge. Is the phone dying?

Do a Li-ion battery rebuild. Do a full 6-8 hour charge with device in sleep mode, next run it down to about 45-50 % and then a 4-5 hour charge. After that use your phone and take it down to 30%. Another 6-8 hour charge and then down to no lower then 20-25% and one more full 8 hour charge. At that point your battery should be rebuilt back to a normal life cycle. This should eliminate your battery problem.

How can i get more than 1000 items in Custom List Displaying Items?

http://.....sites/_vti_bin/listdata.svc/AddressBook(List) allows 1000 items Only my AddressBook List, but i have more than 1000 items in my AddressBook list. I want to get items
from AddressBook list and bind in another place using Autocomplete method like this.
=======>>>>listurl=http://.....sites/_vti_bin/listdata.svc/AddressBook.
and my coding in camel like below
protected void btnpopulatedetails_Click(object sender, EventArgs e)
SPSite objSite = SPContext.Current.Site;
SPWeb objWeb = objSite.OpenWeb();
objWeb.AllowUnsafeUpdates = true;
SPList list = objWeb.Lists["Address Book"];
SPQuery query = new SPQuery();
query.QueryThrottleMode = SPQueryThrottleOption.Override;
query.Query = "<Where><Eq><FieldRef Name='Title'/><Value Type='Text'>" + txtcustomer.Value + "</Value></Eq></Where>";
query.RowLimit = 500;
SPListItemCollection items = list.GetItems(query);
function fnCustomerSearchBind() {
if ($("input[id$='txtcustomer']").length != 0) {
var collcustomer = searchCustomers('', urlTo, fieldto);
$("input[id$='txtcustomer']").autocomplete({
source: collcustomer,
//maxLength:10,
select: function (event, ui) {
//debugger;
event.preventDefault();
$("input[id$='txtcustomer']").val(ui.item.value);
$("input[id$='btnpopulatedetails']").click();
return false;
minLength: 0,
function searchCustomers(value, listurl, fieldto) {
var collcus = new Array();
var custresults;
var url =listurl + "?$filter=startswith('" + fieldto + "','" + value + "')";
//debugger;
$.ajax({
cache: true,
type: "GET",
async:false,
dataType: "json",
url: url,
success: function (data) {
custresults = data.d.results;
//alert(listurl);
// alert(data.d.results);
for (var x = 0; x < custresults.length; x++) {
//alert(custresults[x]['To']);
collcustList.push(custresults[x]['To']);
//debugger;
//debugger;
return collcustList;
In my research listurl=http://.....sites/_vti_bin/listdata.svc/AddressBook has 1000 items in 1st Page by default, So how to change 1st Page by default to All Pages through
code. I think you understand my environment by look above coding, if you don't I am using office 365 sandbox solution. One more thing i know through my research Pages can be change by using Ado.Net Data Service, i tried this one but this one support windows
server 2008 r2 only but i am using Windows Server 2012 r2. Please help me if you know the answer.

Hi,
Here is a blog would be helpful:
ADO.NET Data Services returns 1000 items
https://gilleslauwers.wordpress.com/2010/12/08/ado-net-data-services-returns-1000-items/
Best Regards,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Cannot Get More Than 3 Wireless Connections

Howdy, I have a Linksys WRT54G v8. I can't get more than three wireless connections established to the router at a time. Is this a known limitation of the Linksys hardware or am I experiencing a novel problem. I've changed frequencies and switched from mixed mode to G only in order to resolve the problem but these have not made a difference. Allowed number of DCHP users is set to 50. Any suggestions?

In theory, your router can support up to 32 wireless users. However, since the 54 Mbps bandwidth is shared, the practical limit is much lower, but should be more than 3.
How many "4th" computers have you tried to connect? What exactly happened when you tried to make the connection? Did you turn off the wireless computer's software firewall before you tried to connect? Is the wireless computer setup to "Obtain an IP address automatically" and "Obtain DNS server address automatically" ? What wireless adapter(s) are in the computers? Please give all details of computers that failed to be "number 4".

Cannot get more than 54Mbps N speed in Windows

I have a 1st-gen Airport Extreme (dual-band) Base Station, firmware 7.4.2, and a MacBook Pro, "Mid/Late 2007," 2.4GHz. I have separate 2.4GHz and 5GHz network names on the AEBS. I have a great 300Mbps connection when I am in OS X 10.6, but when I switch over to Windows 7 on the MBP, I have never been able to connect at more than 54Mbps. I have connected to my friend's 2nd-gen AEBS in Windows at 300Mbps, so I know it's not my MBP. Is there any way to fix this connection speed in Windows? Thanks for any suggestions.

I do have the Radio Channel Selection set to Automatic. Would it make a difference to specify the 5GHz channel?

How can I get more than 5 items in my Recent Projects list?

After a rather horrendous incident with trying to do a series of videos all in one project using bins and shared media and a savefile that got *WAYYY* out of hand (20 minutes to load the file)- which I believe was tied to importing media from another .proj file, I have switched to a more modular approach with anywhere from 2-5 projects in each project and now a collection of around 15-25 projects on the go. Most of these are "work on a chapter, then change to another project while waiting for footage for another project" and several of them share pieces including multicam segments and sync'd audio.
Rather than importing from another project, I am using Control-C, switch to a different project file, then paste in. This isn't the most "Adobe Professional" style way of doing things, but considering that I lost several hours to trying to recover from the last project, even when I only needed to spend 20 minutes pumping out a rough cut, I'm not going back to that method until my next computer upgrade and until I begrudgingly switch to CC in around 1-1.5 year's time.
So the issue that I'm faced with is that I'm often using the Open Recent Project flyout and having 5 projects on that list is just not enough to be remotely useful.
In MS Office, the list is quite long and even in photoshop, I can get 10. That's enough for my Photoshop, but I switch projects using the Recent Projects list in Premiere a LOT more often. I could just use my explorer windows to jump around, but given that I have 5-6 explorer windows open per project most of which are folders crammed with footage, PSD stills and peak files, plus other non-video things I'm working on right now, that's really not the simplest way to navigate at a glance.
How can I get 10, 20 or 25 items in that flyout list instead of mucking about with 5?
I run Adobe Production Premium CS6.

I see a lot of people not reading the circumstances of what I said.
I did mention that currently I use the "explorer" method and it's kind of clumsy. Although I liked the idea of using shortcuts. I had thought about moving the files, but didn't think about shortcuts... considering everything on my desktop is a shortcut, I'm really not sure why I didn't think of that.
But I did mention that I almost always have anywhere from 12-15 windows open at any given time in my explorer. I am involved with management of 4 different companies right now, two of which are in startup mode. Videos are important for me, but not my only duty. These windows only go down when I shut down my computer, which happens on average once every 4 months. It is not a problem on a reasonably capable system.
Still, for a project of currently 23 files (just got increased to 28 and expected to rise to 32-35), and because I have had project files go sour on me, I keep some hierarchy and because I don't have 100% creative control over all my projects, I also occasionally have to do re-overs ie when a specific style of writ is nixed by a boss or customer. Those 23 project files also have version iterations.
So navigating 'at a glance' through a file explorer isn't always the most practical.
In the end, I'll probably try to find some time to re-organize my file structure using shortcuts.
Still, given the number of 'recent files' can be modified or is larger than 5 in: Windows Start Menu, Recent documents, Adobe PDF recent documents, Adobe Photoshop, All Office suite programs...
It's just weird that there's only 5 for a program intended for the kind of people that work on projects somewhat larger in scope than "hey, we took the dog to the park the other day".
@Jerry Klaimon - not sure what version of Premiere you're using, I'm using CS6 with Production Premium CS6. Recent files only shows 5. Photoshop shows 9. For my current workload, I'd probably want 10-12 and it would be nice if they could go to 20 or more IMHO. Look at History states. History states default to 20. I usually set this to 35 whenever I set up any user's computer. It's easy to choose what suits me from the preferences menu. I don't see why they wouldn't have the same idea for 'recent files'
@anyone who thinks I'm stupid - please feel free to insult me. A forum scuffle is often a great way to get the attention of moderators who might be in a position to pass this idea on to someone who could do something about it. I'm also anal, stubborn, holier-than-thou and not-as-smart-as-i-think-i-am if you want some ideas to get started .
@Steven Gotz - you are quite correct that asking is important. Probably a smarter thing to do before pestering the devs with feature requests is to thoroughly check to see if it is in fact already existing. Adobe products are famous for having features that nobody knows about. Most of the questions I have that Google or Lynda.com didn't answer have been answered here in the forums. Then once I've seen that a few hundred pairs of eyes sharper than mine have also come up with nothing, then perhaps it might be worthwhile sending in a feature request. In this case, I will probably toss a feature request in later, but I'll probably just use your idea of keeping a master project folder with shortcuts.
@MarkMapes - I do not have a problem loading files. Project files load just fine for me. But I have one project file that has a problem that loads a HUGE amount of RAM and takes nearly 20 minutes to open. It even takes almost 8 minutes to close it. It was acting as my master file with everything nested in sequences and I needed to spend a whole afternoon to pull those sequences out using copy-paste because bringing them in via Import Sequence brought the problem into the new file. I would file that under "glitched save files" rather than "slow loading".
@Jon-M-Spear - good idea too - although I did cringe a bit at the suggestion of putting things on the desktop. I have bad habits and I work very hard to try to make other people who have worse habits in this company to try to get them to not keep anything on the desktop. In fact, it's probably my favorite thing about Windows 7 that you can have a clear or nearly totally clear desktop.
Thanks for your comments folks.

Make header visible if more than one item in list

I am trying to create a report using LiveCycle/Acrobat, i.e. the form is created as a dynamic pdf in livecycle. I will open it with acrobat and import data.
To simplify the report, it has two columns
Client    Date Seen
Not all clients have ever been seen, and I would like the report to look something like:
Joe Blow    Date seen
                 may 5
                 june 16
Mary Smith Date seen
                  july 23
John Smith
Fred Jones   Date seen
                  jan 14
The important point there is that for John Smith, who has no instances of being seen, I want to make the header (Date seen) invisible.
If it was a form into which someone was entering data, I would do something like (on the Exit event):
if (Date.rawValue == null)
{parent.parent.HeaderRow.presence = "invisible"}
else {parent.parent.HeaderRow.presence = "visible"}
but when I import XML data I don't think there is an "event".
I suspect what I have to do is insert a script object, and I think it needs to be called somehow after the "Import Data", and I suspect it needs to loop through all the nodes and work out which instances of the HeaderRow should be invisible, and which invisible, but I'd appreciate some guidance.
Thanks,
Jon

Use the forum for Livecycle Designer.

Cannot move more than 2 mailboxes from exchange 2007 to Exchange 2013

I have been trying to move mailboxes from ex2007 to ex2013with the new-migrationbatch and the new-moverequest command.
I have a DAG-cluster with two servers with all roles.
What happens is that I cannot get more than two concurrent mailbox moves. If I restart the MRS-service nothing happens. I have changed the config-file for the mailbox replication service and currently have these settings:
MaxMoveHistoryLength="5"
MaxActiveMovesPerSourceMDB="20"
MaxActiveMovesPerTargetMDB="20"
MaxActiveMovesPerSourceServer="100"
MaxActiveMovesPerTargetServer="100"
MaxTotalRequestsPerMRS="100"
What is funny is that when I start a new batch with autocomplete off, only two mailboxes goes to 95% and the rest of them is not even started.
The command I use is New-Migrationbatch -local -Name TestNew -csvdata ([System.IO.File]::ReadAllBytes("c:\temp\exchange\migration\testmigration.txt")) -targetdatabases mdb001,mdb002 -autostart
Here is the output of Get-MigrationConfig | fl
RunspaceId : d382f8a7-924a-4f0e-812e-f18970b632e2
Identity :
MaxNumberOfBatches : 100
MaxConcurrentMigrations : Unlimited
Features : MultiBatch
CanSubmitNewBatch : True
SupportsCutover : False
I have off course restarted both servers and services.

Just out of curiosity, on which server you made these changes? Mailbox or CAS? And on Target or Source Server?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Business Catalyst will not allow me to add more than 11 items to Web Map? Is there any fix for this?

Basically I cannot add more than 11 items on to a web app map. If I add more than 11 than the rest of the items appear of the coast of Africa for some reason. I am not sure why this happens but I was wondering if anyone else has had a similar problem and found a fix.

Basically I cannot add more than 11 items on to a web app map. If I add more than 11 than the rest of the items appear of the coast of Africa for some reason. I am not sure why this happens but I was wondering if anyone else has had a similar problem and found a fix.

Pop to get more than one value of same type

Hi
I want to give pop up that can take 3 customer numbers
and export it.Problem with <b>popup_get_values</b> function module is that you cannot get more than one value of same type for example here <i>kna1-kunnr</i>.
Is there any function module to solve this problem.
Regards
Amol Deshmukh

Hi,
may be you can use knvv-kunnr for the second value ....
That should also do the job.
regards
Siggi

How to import more than 2k items from Excel(2010) to SharePoint 2010 List?

Hi,
I am getting error while importing more than 2k items from Excel to SharePoint List.
Need solution!!

Hi.
Try to use the Import Spreadsheet list template to import your data.
http://www.dummies.com/how-to/content/import-a-spreadsheet-as-a-list-in-sharepoint-2010.html
Regards,
Bubu
http://zsvipullo.blogspot.it
Please mark my answer if it helped you, I would greatly appreciate it.

I cannot open more than 1 Tab per window. The "+" does not work as well as the item "New Tab" from the File drop-down menu. What shall I do ?

I have just removed FireFox and reinstalled it again on my Mac Book PRO.
When I open FIreFox I canNOT open more than 1 TAB.
I click on the "+"on the top line of the window. It should open another TAB but id does NOT.
I click on the File item in the top menu bar. A drop-down menu pops up. I click on "New Tab" and nothing happens.
How can I get more than 1 Tab on the same window ?
This feature works with Safari !
Thank you so much.
Best regards

We have seen reports about a Community Toolbar extension causing this issue with not being able to open a new tab.
So if you have such a toolbar then start with disabling it.
*Tools > Add-ons > Extensions
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Cannot have more than one Mobile item for a person

Hi,
I cannot have more than one mobile phone item for a person. In India some of them carry dual SIM card phones and both will be valid. In Lumia 800, I dont see an option to add two mobile items. I can do with a work around by choosing one mobile item with Windows Live Account and another with Google Account. But then that is not the right way to do it. If I need it both on same account, then I cannot do it.
This feature is available in all the Android phones. Also i am facing another issue is that Lumia 800 does not sync any mobile item #2 of Google account, so I have to go to Google and manually add that phone number to my phone, which is painful.
Hope Microsoft is listening.
But I really like the way the facebook, SMS and all other chat are sync'ed in one place.
Regards,
-Srinivasan.

The wierd thing is they have duplicates for Home/Work but not for Cell. I have the odd contact that has two cell phones. Really only two work arounds, use one of the other available types as a secondary cell number or what I do is create two contacts, one in Exchange and one on Live. Since my main account is Exchange, I put the secondary number in the Live contact, then on the phone I link the two together. This way I see two cell numbers for one contact.

Cannot add more than one reminder, add new list, to reminder app in iOS 7.1, app crashes a lot

Default iOS reminder app: Cannot add more than one reminder, cannot add new list, after updating to iOS 7.1. The app crashes frequently on editing or just by pressing return..

Hello Kyem22,
Thank you for providing the details of the issue you are experiencing with the Reminders app quitting unexpectedly.
The first thing I recommend is quitting and relaunching all the applications on your iPad:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If you are still seeing the same issue after quitting all the apps, I recommend restarting your iPad and then resetting if it's still not working:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, the last thing I recommend is backing up and restoring your iPad. The Reminders app is not something that can individually be reinstalled, but backing up your iPhone and restoring the iOS software will reinstall the application:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Best,
Sheila M.

CMDGW_CAT:3441: ERROR: Cannot have more than 3 entries in RACCESSPOINT LIST

Hi,
i have tuxedo 8.1 in HP-UX.
In the section of my dmconfig i have:
SERVICEF LDOM=DOMLOCAL RDOM=WTC1,WTC2,WTC3,WTC4
I have this error when i tried to compile with dmloadcf -y dmconfig:
Invalid value
CMDGW_CAT:3441: ERROR: Cannot have more than 3 entries in RACCESSPOINT LIST
CMDGW_CAT:1546: ERROR: dmloadcf: Above errors found during syntax checking
can I increase the value of the parameter RDOM over 3?
How?
thanks...

Hi,
The syntax:
service LDOM=local_domain RDOM= dom1,dom2,dom3
defines failover remote domains for that particular import. It's not meant to provide access to a service in multiple domains. What you want is basically what you did, i.e.,
service LDOM=local_domain, RDOM=dom1,dom2
service LDOM=local_domain, RDOM=dom2,dom3
service LDOM=local_domain, RDOM=dom3,dom4
service LDOM=local_domain, RDOM=dom4,dom1
This would provide load balancing across the 4 domains, and still provide failover domains, although if the connection policies are set to ON_STARTUP, then the following is sufficient:
service LDOM=local_domain, RDOM=dom1
service LDOM=local_domain, RDOM=dom2
service LDOM=local_domain, RDOM=dom3
service LDOM=local_domain, RDOM=dom4
As only the active domains will be used, and inactive ones will be skipped.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Cannot get more than 8 item in list component

Similar Messages

Maybe you are looking for