Cannot move more than 2 mailboxes from exchange 2007 to Exchange 2013

I have been trying to move mailboxes from ex2007 to ex2013with the new-migrationbatch and the new-moverequest command.
I have a DAG-cluster with two servers with all roles.
What happens is that I cannot get more than two concurrent mailbox moves. If I restart the MRS-service nothing happens. I have changed the config-file for the mailbox replication service and currently have these settings:
MaxMoveHistoryLength="5"
MaxActiveMovesPerSourceMDB="20"
MaxActiveMovesPerTargetMDB="20"
MaxActiveMovesPerSourceServer="100"
MaxActiveMovesPerTargetServer="100"
MaxTotalRequestsPerMRS="100"
What is funny is that when I start a new batch with autocomplete off, only two mailboxes goes to 95% and the rest of them is not even started.
The command I use is New-Migrationbatch -local -Name TestNew -csvdata ([System.IO.File]::ReadAllBytes("c:\temp\exchange\migration\testmigration.txt")) -targetdatabases mdb001,mdb002 -autostart
Here is the output of Get-MigrationConfig | fl
RunspaceId : d382f8a7-924a-4f0e-812e-f18970b632e2
Identity :
MaxNumberOfBatches : 100
MaxConcurrentMigrations : Unlimited
Features : MultiBatch
CanSubmitNewBatch : True
SupportsCutover : False
I have off course restarted both servers and services.

Just out of curiosity, on which server you made these changes? Mailbox or CAS? And on Target or Source Server?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

Since downloading the iOS on my iPad, I cannot download more than one pdf from mail to iBooks. I have to shut down y iPad and start again. Any suggestions?

Since downloading iOS on my new iPad, I cannot downlaod more than one pdf from mail into iBooks. I have to shut down my iPad and restart it to save a second pdf. Wasn't a problem with the old operating system. Any suggestions?

It seems that I have solved my issue by performing a full factory reset (erasing all content, something which I had hoped to avoid) restoring from an iCloud backup did not alleviate the issue, I had to set up as a new iPad.
Hopefully anyone else else who has this issue in the future will be able to find this.

Moving mailbox from exchange 2013 back to exchange 2007 ..

Hi Guys,
I recently configured configured co-existence between exchange 2007 and exchange 2013. I moved a pilot user from exchange 2007 to exchange 2013 and now the user has issues receiving mails.
I am trying to move the user back to 2007 pending the resolution of the issue. The move status says completed but the mailbox remains in the exchange 2013 environment.
I need to return the user to an exchange 2007 mailbox database ..any ideas on what I am missing.
Thanx guys ..
~Richard
..forever is just a minute away*

Hi Richard,
Please move your mailbox from Exchange 2013 to 2007 from the Exchange 2013 admin center (EAC) and the Exchange Management Shell instead of EMC in Exchange 2007.
Then check whether the issue persists. If possible, please provide more error logs for further analysis.
Regards,
Winnie Liang
TechNet Community Support

Migrate mailboxes from Exchange 2013 to Exchange 2010

Hello,
We have a merger and would like to know if it is possible to migrate mailboxes from Exchange 2013 to Exchange 2010 in a cross-forest scenario.
Or should we first upgrade destination Exchange 2010 to 2013?
Peteris

Hi Peteris,
Based on my tests, we can move mailboxes from Exchange Server 2013 to Exchange server 2010. You can use the Prepare-MoveRequest.ps1 script in the EMS to prepare mailboxes for cross forest moves.
For more information about it, here is a helpful article for your reference.
Prepare mailboxes for cross-forest moves using the Prepare-MoveRequest.ps1 script in the Shell
http://technet.microsoft.com/en-us/library/ee861103(v=exchg.150).aspx
Hope my clarification can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server

Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server. The command works if you issue directly from the server exchange shell.
I open the remote power shell to the exchange server 2013.
Issue the following commands and getting the following error.
$mailbox = Get-Mailbox -Identity testuser$mailbox.EmailAddresses -= "eum:50004;phone-context=telExt5digits.lync5.com"Then getting the following error:Method invocation failed because [System.Collections.ArrayList] doesn't contain a method named 'op_Subtraction'.
At line:1 char:27
+ $mailbox.EmailAddresses -= <<<< "eum:50004;phone-context=telExt5digits.lync5.com"
+ CategoryInfo : InvalidOperation: (op_Subtraction:String) [], RuntimeException
+ FullyQualifiedErrorId : MethodNotFoundHelp!

Now for an answer - your remote session doesn't have the same object you have on the server itself. Notice it says this is an array list, not a ProxyAddressCollection. If you need to work around this, you'll need to massage the addresses another
way that the system will accept. I'd try the following:
$NewAddresses = $mailboxEmailAddresses | ? { $_ -notlike "eum:50004;phone-context=telExt5digits.lync5.com" }
See what you get in the $NewAddresses variable when you do this.

Outlook 2010 clients cannot access their Online Archive mailbox in Exchange 2013??

Hello,
I have an issue where my Outlook 2010user cannot see/access their Archive mailbox when they are migrated from Exchange 2010 to Exchange 2013.
Both the live and archive mailbox is in Exchange 2013, the user can launch Outlook but if they click on their Archive mailbox it is unavailable.
Once the user is upgraded to SP2 or Outlook 2013 they have no issues accessing their archive mailbox.
These users have the minimum required Outlook version (14.0.6126.5000),
they are running 14.0.6129.5000.
Is there a different requirement on the Outlook client if the user has an archive mailbox in Exchange 2013 as well?
Thank you.

Hi,
Is there any update on this thread?
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If
you have feedback for TechNet Subscriber Support, contact [email protected]
Simon Wu
TechNet Community Support

Cannot print more than one copy from Win2000 to USB printer on a G5

Hi,
I have set up shared printing so that a Windows 2000 PC can print directly to my Canon S600 on the USB port of the G5, however, we cannot get it to print more than one copy of a document at a time, i.e. you tell Word to print five copies but only one comes out.
I tried changing the printer driver to the Canon S600 (from an installer CD), but we couldn't get it to print at all.
Then tried the HP Laserjet driver and Apple Colour Laserwriter driver. Both these work but we still only get one print out at a time.
Is it a case of going through all the printer drivers until one works, or is it a limitation of printing over a wireless network to a USB printer?
Justin

As I recall, there is a setting in Windows that determines whether it is the printer, or Windows itself, that generates the multiple copies. You need to have Windows generate each copy.

Migrating a mailbox cross forest from exchange 2013 Sp1 to exchange 2010 SP2 Update rollup 8

I can migrate a mailbox fine from exchange 2010 sp2 update rollup 8 to exchange 2013 sp1 or Cu2.
I was testing today migrating cross forest from 2010 sp2 udpate rollup 8 back to exchange 2010 sp2 but I get the below error. Is this even possible? I cannot find any documentation on this scenario yet.
VERBOSE: [21:52:47.622 GMT] New-MoveRequest : The remote server doesn't support client 'casservername.domain.com'
version (14.2.341.0 caps:05FEFF). Missing functionality: 'TenantHint'.
VERBOSE: [21:52:47.637 GMT] New-MoveRequest : Admin Audit Log: Entered Handler:OnComplete.
The remote server doesn't support client 'casservername.domain.com' version (14.2.341.0 caps:05FEFF). Missing functionality: 'TenantHint'.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MoveRequest], RemotePermanentException
+ FullyQualifiedErrorId : 782D22F0,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest

Hi Steve,
I'm a little confused what you are saying. Here is my understanding:
When you migrate mailboxes from Exchange 2013 back to Exchange 2007, the above error occurs.
If I have misunderstood your concern, please let me know.
For migrating mailboxes back to Exchange 2007, there is a simple and straightforward method. Please use the New-MailboxExportRequest cmdlet to convert all mailboxes into pst files. And then use the Import-Mailbox cmdlet to import all pst files into Exchange
2007.
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Anyone else have the issue where, after the 8,3 upgrade, you cannot access more than 1 exchange account on your iPhone? This is annoying to me as I need to access 4 daily and cannot due to this error.

Anyone else have the issue where, after the 8,3 upgrade, you cannot access more than 1 exchange account on your iPhone? This is annoying to me as I need to access 4 daily and cannot due to this error.
The first one, my private home email, works fine. With the other 3, I get the message "Cannot get mail: The connection to the server failed"
All were working fine before the 8.3 upgrade. I did try the old trick of making one minor change on the account and resaving, but that did not change anything. I even deleted my work account and re-entered it from scratch, but again, sadly, no luck. For the time being, I am successfully getting the email via IMAP, but this ***** compared to exchange. Anyone have any idea what is happening or if a fix is in the works?

Well, the one set up on exchange 2k3 is now working fine, although no changes were made on either the iPhone or the exchange side, so that's fun, but it still is throwing errors when connecting to the other 2 exchange accounts. The common elements are that both non-functioning exchange accounts are google apps for business accounts. So is one of the ones that's working, by the way. The settings on both accounts are the same as the one that's working, and both worked fine before the 8.3 upgrade. I have no issue accessing both of these accounts on my ipad which is currently on 8.2.x. If it's not the iphone OS at fault, I'm at a loss as to what it could be.

I cannot highlight more than one e-mail. I am concerned about this when I am in the Junk mailbox. I do not want to open any e-mails that are in this mailbox.

I cannot highlight more than one e-mail. I am concerned about this when I am in the Junk mailbox. I do not want to open any e-mails that are in this mailbox.

Two thoughts:
1. You never need to open any emails in the junk mailbox. You can simply do Mailbox > Erase Junk Mail from Mail's menu.
2. What happens if you hold the shift key after highlighting the first in a series of emails, then click the second one with the shift key depressed? That should hightlight both.

Exchange 2013 - can no longer move mailboxes from Exchange 2010 to Ex 2013.

Migrating to Exchange 2013 from Exchange 2010. Created Ex 2013, moved some mailboxes OK. Then could no longer move mailboxes. No errors. The Migration email says complete. Synced: none, Total Mailboxes: none.
Tried several mailboxes. Same result.
Ex 2010 is SP3 RU6, (at least it says RU6 is installed in Programs/Features. The build is for SP3 w/o RU6???)
Ex 2013 is SP1 aka CU4.
How to proceed???
john11

After many attempts to fix the issue (move remaining 4 mailboxes from Exchange 2010 to Exchange 2013) I contacted Microsoft and we resolved the issue. Here's how.
btw - Thanks for the suggestions from Ed. However, they did not seem to move us forward.
What did work:
1. On the Exchange 2010 box, create a new database. (Someone else suggested this also). Then move the remaining Exchange 2010 mailboxes to this new db. Then after that, move the 4 mailboxes to Exchange 2013 using the GUI on Ex 2013. This only worked for one
of the four mailboxes. The other 3 failed.
2. Apparently, we need to restart the Microsoft Exchange Mailbox Replication service on the Exchange 2013 after several failed move attempts to clear cache related to the moves.
3. Then on the Exchange 2013 box, use this Exchange shell command:
New-MoveRequest -identity "[email protected]" -TargetDatabase "Exchange 2013 DB name" -BadItemLimit '500' -verbose
This moved the remaining 3 mailboxes including the Discovery mailbox. It took some time. But we could check the progress using
Get-MoveRequest
The MS Tech was terrific. Really knew his stuff. And all mailboxes are on Exchange 2013. Well, the last one is still moving, but I am optimistic.
Thanks for the suggestions. I had to get this done and the MS Tech made that happen.
john11

HT6114 I cannot select more than one message at a time to delete from the trash. Any ideas will be appreciated

I cannot select more than one message at a time to delete from the trash. I did not have this problem before I updated to Maverick. What am I doing wrong?

This works in many different ways and in lots of apps.
Hold down the command key and you can select from a list (leaving some not checked) to exclude them from the delete process.
To empty all of the trash folder use command-a keys to "select all" and then the delete key to remove them.

Move mailbox from exchange 2010 2003 , Transient error MapiExceptionLogonFailed has occurred.

We are currently migrating from Exchange 2003 to Exchange 2010, same domain.
We have successfully moved some mailboxes from exchange 2003 to exchange 2010 without any problems.
Now we need to move 1 mailbox back from exchange 2010 to exchange 2003.
After creating the moverequest it stucks on 0% and the log shows the error below.
After using Bing I found this post -> http://social.technet.microsoft.com/Forums/exchange/en-US/ef41ae05-8816-4c0c-968a-c48f0e3d50b5/move-mailbox-back-from-exchange-2010-to-exchange-2003-failure?forum=exchangesvrdeploylegacy
This suggest ->
After I give FULL permissions to each Mailbox Stores on Exchange 2003 server, I was able to move my mailbox back onto the Exchange 2003 server. In details:
Simply right click Storage Group\Mailbox Store and go to Security, in there you may see Exchange Servers group already there, if no add it in, then give it FULL permissions! and thats it!
Create a new move request but still stuck on 0% and error as below
20-3-2014 16:32:10 [ex2010p11] 'contoso.com/Users/exadmin' created move request.
20-3-2014 16:32:11 [ex2010p21] The Microsoft Exchange Mailbox Replication service 'exchangep21.contoso.com' (14.3.151.0 caps:07) is examining the request.
20-3-2014 16:32:11 [ex2010p21] Connected to target mailbox 'Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)', database 'ex2003\Basic\Basic', Mailbox server 'ex2003.contoso.com' Version 0.0 (Build 7638.0).
20-3-2014 16:32:11 [ex2010p21] Connected to source mailbox 'Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)', database 'EX2010DB', Mailbox server 'ex2010p20.contoso.com' Version 14.3 (Build 174.0).
20-3-2014 16:32:11 [ex2010p21] Request processing started.
20-3-2014 16:32:11 [ex2010p21] Transient error MapiExceptionLogonFailed has occurred. The system will retry (1/60).
Error details: MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
Diagnostic context:
Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: ex2003
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -545057711
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 45169 StoreEc: 0x824
Lid: 44273
Lid: 59431 EMSMDB.EcDoConnectEx called [length=163]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=0]
Lid: 56945
Lid: 59431 EMSMDB.EcDoConnectEx called [length=163]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=0]
Lid: 59505 StoreEc: 0x3F2
Lid: 52465 StoreEc: 0x3F2
Lid: 60065
Lid: 33777 StoreEc: 0x3F2
Lid: 59805
Lid: 52209 StoreEc: 0x3F2
Lid: 56583
Lid: 52487 StoreEc: 0x3F2
Lid: 19778
Lid: 27970 StoreEc: 0x3F2
Lid: 17730
Lid: 25922 StoreEc: 0x3F2
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.ExRpcConnection.Create(ConnectionCache connectionCache, ExRpcConnectionCreateFlag createFlags, ConnectFlag connectFlags, String serverDn, String userDn, String user, String domain, String password, String httpProxyServerName,
Int32 ulConMod, Int32 lcidString, Int32 lcidSort, Int32 cpid, Int32 cReconnectIntervalInMins, Int32 cbRpcBufferSize, Int32 cbAuxBufferSize, Client xropClient, Byte[] clientSessionInfo, TimeSpan connectionTimeout)
at Microsoft.Mapi.MapiStore.OpenMapiStore(String serverDn, String userDn, String mailboxDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag
storeFlags, CultureInfo cultureInfo, Boolean wantRedirect, String& correctServerDN, ClientIdentityInfo clientIdentity, String applicationId, Client xropClient, Boolean wantWebServices, Byte[] clientSessionInfo, TimeSpan connectionTimeout)
at Microsoft.Mapi.MapiStore.OpenMailbox(String serverDn, String userDn, String mailboxDn, String userName, String domainName, String password, String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag storeFlags, CultureInfo cultureInfo,
WindowsIdentity windowsIdentity, String applicationId)
at Microsoft.Exchange.MailboxReplicationService.MapiUtils.OpenSystemMailbox(Guid mdbGuid, String serverDN, String dcName, NetworkCredential cred, String& systemMailboxDn)
at Microsoft.Exchange.MailboxReplicationService.LocalMailbox.OpenSystemMailbox()
at Microsoft.Exchange.MailboxReplicationService.LocalMailbox.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncStateStr)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.<>c__DisplayClass57.<Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState>b__56()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncState)
at Microsoft.Exchange.MailboxReplicationService.MailboxCopierBase.ClearSyncState()
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.<>c__DisplayClass23.<CleanupOrphanedDestinationMailbox>b__22(MailboxMover mbxCtx)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.CleanupOrphanedDestinationMailbox(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: IMailbox.SaveSyncState
OperationSide: Target
Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)
Key: F2FA63B0116C564EA4C598D69786443D9E4FB582FF27D2449142F949D567E1E7E0CA914F6695624C98892FA527AAA91E
SyncStateLength: 0
20-3-2014 16:32:41 [ex2010p21] The Microsoft Exchange Mailbox Replication service 'ex2010p21.contoso.com' (14.3.151.0 caps:07) is examining the request.
20-3-2014 16:32:41 [ex2010p21] Connected to target mailbox 'Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)', database 'ex2003\Basic\Basic', Mailbox server 'ex2003.contoso.com' Version 0.0 (Build 7638.0).
20-3-2014 16:32:41 [ex2010p21] Connected to source mailbox 'Primary (82b54f9e-27ff-44d2-9142-f949d567e1e7)', database 'EX2010DB', Mailbox server 'ex2010p20.contoso.com' Version 14.3 (Build 174.0).
20-3-2014 16:32:41 [ex2010p21] Request processing started.
20-3-2014 16:32:41 [ex2010p21] Transient error MapiExceptionLogonFailed has occurred. The system will retry (2/60).

Hello，
When you move mailbox from exchange 2010 to exchange 2003, please check if the following situations exist:
http://technet.microsoft.com/en-us/library/dd638157(v=exchg.141).aspx
Before you move mailbox again, please clear the previous move request.
I recommend you use EXBPA to check your exchange server 2003 and exchange 2010.
Please check if inheritable permission is missing on the mailbox store on Exchange Server 2003.
Cara Chen
TechNet Community Support

Cannot display more than 16 significant digit numbers from Oracle

The WebI Report cannot display more than 16 significant digit numbers from an Oracle data type field.
This occurs for both an ODBC and native driver connection to Oracle.
The data is defined by Number Data Type in Oracle, and view correctly in Universe, but display incorrectly in WebI report which created by InfoView.
I know BOE XIR2 has this behavior, but it seems that XI3.0 and XI3.1 also have this problem.
If this behavior in XI3.0 and XI3.1 perform by design? or it's a bug? and Why?
Thanks!

Hi Sarah,
Precision limitation of a Web Intelligence filter constant :
In an Oracle database, a Number field type can store up to 38 digits. When creating a Web Intelligence report in the Java Panel, a condition is specified for this field (that is represented in the universe as a number), and a constant number is entered for its value, only up to 15 digits of precision are retained.
For example, if 1234567890123456789 is entered, the value becomes 1234567890123460000.
Or, if you have a column in database which has a number like 123.123456789012345678 it will display only 123.123456789012.
Cause
The reason for this limitation is that Java Panel represents a number internally as a Double field type with only 15 digits precision. This is by design.
Resolution
The only workaround is to change the field type to a Character field; however, doing so means losing the ability to perform calculations and/or sorting on the field.
This issue has been raised as an Enhancement Request and given Track ID # ADAPT00908702.
Regards,
Deepti Bajpai

I am running a late 2007 13" MacBook and when I check status of storage it is showing 88Gb of files but on Finder in Movies I cannot find more than 12-15 Gb where are the rest of the files?

I am running a late 2007 13" MacBook and when I check status of storage it is showing 88Gb of files but on Finder in Movies I cannot find more than 12-15 Gb where are the rest of the files?
I thought a screen dump of the sttus may help picture what I am looking at.

Mike,
That article did seem to confirm that it is not as straight forward as it might seem. Since then I have deleted some of the TV episodes I downloaded on iTunes and the available storage has increased, so I can only assume that when reviewing in finder the files for iTunes are not shown and it would appear one has to go into iTunes to delete them.
I guess I may need to set up an external hard drive to store TV series etc as long as it is easy to transfer between the external drive and the MAC and subsequently my iPad as well, but that is for another discussion.

Cannot move more than 2 mailboxes from exchange 2007 to Exchange 2013

Similar Messages

Maybe you are looking for