Cannot Kill Job, REP-56098:

I have tried running a jsp with a customize.xml file to modify my data source using servlet.
First I got an error saying there was a syntax error in my where clause. I fixed the error in my ml then tried to run the report again. It seems report server is hung.
I am unsuccessful in killing the job through Enterpise Manager and also using killjobid
This is the error I am getting:
Cannot Kill Job with Job ID 181REP-56098: Bad engine name: null
Is there anyway to kill this job outside of EM?
Using 9.0.2 9iAS
Any help is appreciated.
Cindy

hello,
i've seen this issue before and think that it is fixted in either the 9.0.2.1 or the 9.0.2.2 patchset.
regards,
philipp

Similar Messages

  • Cannot kill a session that is running a query on a linked server in SQL Server 2008 R2

    Hi,
    Cannot kill a session that is running a query on a linked server  in SQL Server 2008 R2.
    When I try to kill, it status shown as "KILLED/ROLLBACK"
    I have facing the issue from long back. I searched many and none of them worked for me
    Any help is greatly appreciated
    Thanks
    Jaison
    Carver

    I guess its stuck, can you see some blocking or any other process blocking the rollback.
    can you check rollback status using below command. Or you can use sp_who2 and check status column
    select percent_complete,estimated_completion_time from sys.dm_exec_requests
    where spid=xxx
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

  • Cannot activate job BI_PROCESS_TRIGGER return code 8

    Hi Experts,
                     When i check the cancelled job in (BI) Quality system we got this messages for a Process chain jobs in job log:
    Job log for the PC:
    Job started
    Step 001 started (program RSPROCESS, variant XXXXXXXXXXXX, user ID ALEREMOTE)
    Communication buffer deleted from previous run D7SJFXYB8BZDUE0L9ETKQSIRF
    Chain ZTD_INDEX_REBUILD was removed from scheduling
    Program RSPROCESS successfully scheduled as job BI_PROCESS_DROPINDEX with ID 02002300
    Program RSPROCESS successfully scheduled as job BI_PROCESS_INDEX with ID 02002300
    Program RSPROCESS successfully scheduled as job BI_PROCESS_PLSWITCHL with ID 02002400
    Program RSPROCESS successfully scheduled as job BI_PROCESS_PLSWITCHP with ID 02002400
    Chain ZTD_INDEX_REBUILD Was Activated And Scheduled
    Cannot activate job BI_PROCESS_TRIGGER return code 8
    Process did not report an instance -> no log
    Job cancelled after system exception ERROR_MESSAGE
    I serached with previous postings and solutions in SDN thats not matched with my case. I am getting this error at mid of the process chains ike rebiuld index ,deletion of datatarget contents , some local chain..
    Suggest me...
    Thanks in Advance...

    Check here... Process Chains Problem

  • APEX_PLSQL_JOB: How to end/kill jobs

    Hi,
    I'm wondering if there's a good way to kill jobs that were created using APEX_PLSQL_JOB.
    I have a situation where I create a job using APEX_PLSQL_JOB. The process that it is executing will take a long time to run. After a while I decide that I need to end this job since it's slowing down the server. How can I terminate it?
    I've tried the following:
    - Kill the Oracle session that is executing the code. This terminated the process but just restarted it again a few seconds later
    - Purge the process using APEX_PLSQL_JOB.PURGE_PROCESS. This removed it from the list of APEX PL_SQL jobs in the APEX_PLSQL_JOBS view. It had no effect on the processing of the job.
    Any other ideas on how I can kill the process that I started?
    Thank you,
    Martin
    [http://apex-smb.blogspot.com/]

    On a related note, this is yet another great example of when to use the database resource manager. You could:
    - create a resource consumer group called "LONG_RUNNING_STUFF"
    - that group gets dropped to say 5% CPU after 5 min (just as an example)
    - any session in that group that has an operation that lasts longer than 20 minutes automatically killed (just as an example)
    - in your job code, make a call to DBMS_SESSION.SWITCH_CURRENT_CONSUMER_GROUP() to have that session put itself into the LONG_RUNNING_STUFF group (you need to assign a priv for this)
    It's a great way to let the db manage itself so you don't have to monitor sessions. You might also consider instrumenting your code with dbms_application_info.set_session_longops()
    Tyler Muth
    http://tylermuth.wordpress.com
    [Applied Oracle Security: Developing Secure Database and Middleware Environments|http://sn.im/aos.book]

  • BODI-1270033: Cannot execute Job

    I got
    BODI-1270033: Cannot execute Job XXX   XXX is the job name
    when execute the a batch job in the Data Integrator Server's Designer.
    Anyway, it is fine if I run the job in Management Console and Local PC's Designer.
    Anyone got this error before??

    Hi
    Today I got the same error to an existing job (which ran just fine yesterday).
    You are right it works without any error from Management console but within DI it fails.
    Unfortunately it does not give any specific reason (other than the error mentioned in subject line). The job compiles fine.
    Upon further investigation, came to the conclusion that it fails to connect to some of the ODBC connections I was using in the job.
    We have about 20+ Data stores using unique ODBC connections in this job. Few of those connections were failing and finally I got more specific error when I tried to open one. The error was "Too many client tasksu2026ODBC connection failed". When I looked that error up on internet it said this happens when the connections are not released properly. But I have no idea how I can do so? I rebooted the server which has DI on it thinking that might help but it did not.
    It appears, all of a sudden the DI is not able to handle all those connections effectively.
    I have to use ODBC connections as those are Access files. I am accessing each Data store one at a time in its own Data Flow.
    I have used this method in many of my jobs and till date had no problem. I don't understand why all of a sudden this is giving problem and what the solution would be!
    Any suggestions?
    Thanks
    Sangeeta

  • Cannot reopen firefox, since it's already active. Cannot kill the process in taskmanager. Already uninstalled and removed all the programm files... same problem occurs?? Tried to change the profile etc... nothing works..

    Cannot reopen firefox, since it's already active.... Cannot kill the process in taskmanager.
    Already uninstalled and removed all the programm files... same problem occurs??
    Tried to change the profile and all other actions I found on the support website etc... nothing works..
    When I opened firefox some weblinks in pages I visited (for example the pop up of the calendar on the ryanair website did not work...)... This also happens in the ewplorer and google I use now...
    Can anyone advise me in this? Many thanks?

    Cannot reopen firefox, since it's already active.... Cannot kill the process in taskmanager.
    Already uninstalled and removed all the programm files... same problem occurs??
    Tried to change the profile and all other actions I found on the support website etc... nothing works..
    When I opened firefox some weblinks in pages I visited (for example the pop up of the calendar on the ryanair website did not work...)... This also happens in the ewplorer and google I use now...
    Can anyone advise me in this? Many thanks?

  • Cannot Active Job (Return Code 4)

    Hi All,
    I am trying to start a process chain to create a DSO. Anytime I try and start the process chain, I get the following error:
    Cannot Active Job (Return Code 4)
    Return Code 4 seems to be tied to JOB_CLOSED_FAILED but I am not sure how to resolve this. Does anyone know how to resolve this issue?
    Thanks

    Process chains are used to load data to DSO/Cube/info objects.
    Can you check your process chain start variant job was in release state? or schedule state?
    if its in schedule then make it release or start immediate.
    Go to start variant of your chain-->double click on it-->select change selection-->start immediate and see.

  • ORA-31637: cannot create job SYS_IMPORT_SCHEMA_01 for user SYSTEM in impdp

    Hi All,
    During impdp i am getting this below error:
    ORA-31626: job does not exist
    ORA-31637: cannot create job SYS_IMPORT_SCHEMA_01 for user SYSTEM
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
    ORA-06512: at "SYS.KUPV$FT_INT", line 600
    ORA-39080: failed to create queues "KUPC$C_1_20090507123340" and "KUPC$S_1_20090507123340" for Data Pump job
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
    ORA-06512: at "SYS.KUPC$QUE_INT", line 1606
    ORA-04031: unable to allocate 56 bytes of shared memory ("streams pool","unknown object","streams pool","fixed allocation callback")
    Also increase shared memory hence creating the same problem.
    Can anyone sujjest me what would be the cause?
    Thanks in advance...

    Increase parameter streams_pool.
    Set it for example to 100MB
    Then try again.

  • Unbeatable LOOP? flashplayer uninstall tool obeselete, 50%install error/cannot kill service running

    HELP ME PLEASE I CANNOT INSTALL FLASHPLAYER OR UNINSTALL THE PREVIOUS UPDATE.EXE FILE OR KILL THE SERVICE IN TASK MANAGER WTF?
    service running in task manager will not allow be to end it.
    Ive followed every guide, I cannot figure out the problem. Been up since 7 am its 10 am please help me

    You've posted the SAME question THREE TIMES in  LESS THAN  an hour,
    Understand that this is a "user to user" forum, We ARE NOT employees. We have jobs, families and lives of our own.
    There are "Instructions for a clean install" which work for hundreds of people here each week.
    If you remove Flash Player using your Control panel, download the offline installer  and reinstall it  (provided you haven't screwed your system up with all kinds of other junk) it should work exactly as it's supposed to. I have XP(x64), Vista(x86), Win 7 (x64) and Win 8(x64) ALL running the latest Flash Player and no problems. I use these machines for "testing" so I put them through all kind of garbage that most people don't but... if something really makes a mess, I GET RID OF IT, and put the system back to a stable state.
    When was the last time you defragged your hard drive?
    When was the last time you ran a "deep" disk cleanup?
    When was the last time you cleaned your registry?
    All of these can have an impact on how your system, and things you install, run (or don't).

  • Dbms_scheduler - Can't kill job

    Hi,
    I am using version 10.0.2.3 and have defined a chain successfullly. I ran the chain using :-
    exec DBMS_SCHEDULER.RUN_CHAIN (
    chain_name => 'job_manual_load',
    job_name => 'job_immediate_job',
    start_steps => 'step20');
    I want to kill the job but I cannot seem to using :-
    dbms_scheduler.stop_job(job_name=>'job_immediate_job');
    I tried using using the 'force = true' option but still no luck.
    Any help anyone can provide would be useful ?
    Thanks,

    Can you please try the below steps :)
    1. Determine the owner of the job with the query shown below
    SQL> select job, what, log_user, priv_user from dba_jobs where job=<job_number> ;
    2. Connect to the database using SQL*Plus as the owner of the job (value of priv_user from the
    query results obtained in step 1)
    3. Execute the job removal procedure and commit the transaction.
    SQL> exec DBMS_JOB.remove(<job_number>) ;
    SQL> commit;
    Thanks
    Nisanth Santhan

  • I will be mad if i cannot kill applet

    Hi
    I use whole week to look for the soltion to kill the applet(destroy).
    My applet is a image slider.
    So there is Image[] image = new Image[];
    But when user leave the applet display page, back to menu select new images then play again. The image was still old. The applet still play the old image.
    I put cache-option=no.
    I disable the applet cache in Control panel aslo.
    In the java stop method
    i did
    stop()
    image=null;
    System.ecit();
    System.gc();
    super.destroy();
    All solution failed.
    so i tried my last solution to close the browser and open a new browser using javascript.
    But the applet console still there.
    the applet seems can pass during old browser to new browser.
    Who can help me?
    Please give me a method.
    Cause monday, my project would be demo to customer who come my place by air plane.
    if cannot solve the problem, it really cannot shame myself.
    Yang

    Hi ddanielvalladao
    Thank you
    I think your advice can sovle my problem.
    My applet work process is this way:
    1. html pass two parameters to applet
    start frame picture name
    end frame picture name
    2. then applet using socket passing two parameter to server side deamon.
    3. server deamon would transfer all of invovled picture in a specific folder.
    4. after that applet socket get a feedback, then play those picture always named 1,2,3... in that specific folder
    since those pictures are always be replaced before paly, so my applet SHOULD display all new pictures.
    BUT the problem is applet is always read those same name files from cache.
    now i really give up thinking the way to destroy applet. I am thinking i always put new picture in a new unique folder name.
    But i have new problem also.
    it is posted in arealdy.
    You would find it in the Java Programming.
    If you can take a look, i would be very appricated.
    Yang

  • I Cannot See Job Queue Processes (Jnnn) in v$session

    Hello,
    My Oracle environment is 9.2.0.8 on IBM AIX platform.
    I found that I cannot see any job queue process (Jnnn) in v$session.
    However, the program of the relative process in v$session is null value.
    Does anybody know what is going wrong?
    Thank you.

    not sure...
    I have used 10g RAC.... I find programs .....: os_user@hostname (J00x)
    select inst_id,action ,username ,program from gv$session where program like upper('%j00%')

  • Cannot drop job - says it's running, but it's not

    I did a dbms_scheduler.stop_job (which did not raise any error/warnings), and I killed the database session, but my job is still in user_scheudler_running_jobs view (with null session_id, null cpu_used). When I do a user_scheduler.drop_job, i get an error that the job is running. Any ideas how to get rid of this?
    Thanks
    Paul.

    Hi,
    If a job is forcefully stopped it may take a few minutes for it to be marked as no longer running - it should be done when the database cleans up the process.
    If it remains running after a few minutes (and is not a chain job) then you may be running into a bug tracked internally as bug #7258928 for which a fix may be available through support.
    Hope this helps,
    Ravi.

  • Cannot Stop Job

    Hi,
    I'm running a SQL 2005 SP 2 on Windows 2003 Server R2.
    I have a Job that includes a IS Package and then conducts a lot of calculations of which one runs into an infinite loop.
    The problem now is, that I can't stop the job. If i try it sp_stop_job procedure returns success, but in the activity monitor the job is still running, and restart the job returns that the job is already running
    (SQLServerAgent Error: Request to run job xxx refused because the job is already running... (Microsoft SQL Server, Eror: 22022)
    It helped to restart the Server Agent, but this is not a proper solution as other user work on this database as well, so how can i kill the job without restarting the agent?
    thanks in advance

    Although killing the SPID will solve the "infinite" loop issue for that instance, shouldn't you figure out under what conditions the infinite loop is occurring and try to mitigate the possibility of the infinite loop from occurring?
    Do you have an idea of the circumstances that cause the package to go into an infinite loop?

  • IRecruitment: New users cannot see jobs as candidates

    Hi
    I´m experiencing a problem with iRecruitment. All the people in my company have an Oracle user associated to their corresponding person. The ones created long before (i don´t know exactly when, maybe when iRecruitment was implemented), can connect using the employee candidate resp. and search for jobs without problem. The new created users also connect with the same responsibility, but they cannot see any job. I´ve run the following programs with no success:
    - Synchronize WF LOCAL tables with the following values for the “Orig System” parameter:
    1. PER_ROLE
    2. FND_RESP
    3. FND_USR
    - Sync responsibility role data into the WF table
    - Workflow Directory Services User/Role Validation
    Any idea?
    Thank you in advance

    Thanks guys. I finally solved it. We have a security policy activated to prevent users to see certain info (such as salaries) thru the app or database. One of the tables was per_all_vacancies. So we granted the profile value associated to that policy to these users and now they are able to search for vacancies. Thank you all of you for your help and effort. I´ve noted down all your suggestions so i can solve future problems regarding irec.

Maybe you are looking for