Cannot Active Job (Return Code 4)

Hi All,
I am trying to start a process chain to create a DSO. Anytime I try and start the process chain, I get the following error:
Cannot Active Job (Return Code 4)
Return Code 4 seems to be tied to JOB_CLOSED_FAILED but I am not sure how to resolve this. Does anyone know how to resolve this issue?
Thanks

Process chains are used to load data to DSO/Cube/info objects.
Can you check your process chain start variant job was in release state? or schedule state?
if its in schedule then make it release or start immediate.
Go to start variant of your chain-->double click on it-->select change selection-->start immediate and see.

Similar Messages

Run OS Command job return code

I have a 'Run OS Command' job that shows the correct output and performs the OS functions (trimming logfiles), but EM always says the job 'failed'.
I have tried forcing the script return code to 0 and non-0 values, but that does not make any difference.
How can I get EM to show a "success" status and what determines success/failed OS jobs?
James

Don,
There is a semantic difference when you stop a job or when you stop a specific execution of the job. User can stop a job from job activity page stop button or using "Stop Job" button on job results page. User can stop a execution by using "stop" button after selecting a job execution in specific job results page.
In former case job engine would stop the whole job and job will not be scheduled in future. However when you stop a specific execution of job, then job engine consider it as user is intending to stop only the current execution of the job so future run of job will continue to work as is.
I agree from end user perspective - the message on the confirmation screen is not very clear and we will file a bug and fix in next scheduled version of Enterprise manager.
-- Ashutosh

Getting the return code of an exec-called program

I'm trying to simply call an .EXE (Win32 console-) application from LabView 5, which works fine with EXEC. The problem is, that I cannot query the return code of the program afterwards. (The error output is always 0, no matter what the program has returned.) Anyone knows a nice short solution to that? Thanks!

Hi Ritter,
Somehow I think I may be missing something.
(after looking around)
What version of LV are you using?
I am guessing 5.1 or earlier.
LV 6 EXEC has standard output available.
If you are using LV 5.1.1 or so, I can only recomend the the re-directed solution.
If file system is issue how about using a complete file spec starting with "c:"? Do you expect to be running on a machine that does not have a c drive?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Return code For DataStore objects and InfoObjectsb

Hello Gurus,
For DataStore objects and InfoObjects: you cannot use the
return code in the routine for data fields that are updated by being
overwritten.
as per above statement, why ?
Many thanks,
Frank Zhang

How you creating this file? Why you couldn't create without enter?
But, however, see solution in that case:
File 1.sql:
select 1 from dual;File 2.sql:
select 2/0 from dual;File 3.sql:
select 3 from dual;File exec_sql.sql:
WHENEVER SQLERROR EXIT
@&1
@&2
@&3And you need to generate file as this "test.sql":
define f1 = 1.sql
define f2 = 2.sql
define f3 = 3.sql
@exec_sql &f1 &f2 &f3Regards,
Malakshinov Sayan

Cannot activate job BI_PROCESS_TRIGGER return code 8

Hi Experts,
When i check the cancelled job in (BI) Quality system we got this messages for a Process chain jobs in job log:
Job log for the PC:
Job started
Step 001 started (program RSPROCESS, variant XXXXXXXXXXXX, user ID ALEREMOTE)
Communication buffer deleted from previous run D7SJFXYB8BZDUE0L9ETKQSIRF
Chain ZTD_INDEX_REBUILD was removed from scheduling
Program RSPROCESS successfully scheduled as job BI_PROCESS_DROPINDEX with ID 02002300
Program RSPROCESS successfully scheduled as job BI_PROCESS_INDEX with ID 02002300
Program RSPROCESS successfully scheduled as job BI_PROCESS_PLSWITCHL with ID 02002400
Program RSPROCESS successfully scheduled as job BI_PROCESS_PLSWITCHP with ID 02002400
Chain ZTD_INDEX_REBUILD Was Activated And Scheduled
Cannot activate job BI_PROCESS_TRIGGER return code 8
Process did not report an instance -> no log
Job cancelled after system exception ERROR_MESSAGE
I serached with previous postings and solutions in SDN thats not matched with my case. I am getting this error at mid of the process chains ike rebiuld index ,deletion of datatarget contents , some local chain..
Suggest me...
Thanks in Advance...

Check here... Process Chains Problem

COMMIT failed in RSORAADM, object JOB, function CREATE, return code 4

Dear Gurus,
When I am trying to schedule a backup through DB13, I am getting an error as
"COMMIT failed in RSORAADM, object JOB, function CREATE, return code 4"
Can any body tell me what is the error about and how to resolve it.
Thanks
Best Regards
Dilip

hi Kaushal,
Thanks for your reply. Yes I could solve the issue as my Operation mode was inactive, I made it active and then could schedule the DB13 jobs.
Can you tell me what is the relationship between DB13 jobs scheduling and Operation mode. Also note when I am scheduling DB13 jobs that time none of the background job is running ie my background wp is free. It is only after I activated day/night operation mode, I could schedule the backup.
Thanks once again. Your input was of great help to me.
Best Regards
Dilip

Error in transport, ended with return code: 12, job RDDEXECL cancelled

Hi Friends,
When I am trying to import a request in a BW preproduction system, it is giving below error: However, the transport is imoprted successfully in Quality.
===================================
Program terminated (job: RDDEXECL, no.: 09222300)
See job log
Execution of programs after import (XPRA)
End date and time : 20080509092238
Ended with return code: ===> 12 <===
Job log:
Date Time Message
09.05.2008 09:22:23 Job started
09.05.2008 09:22:23 Step 001 started (program RDDEXECL, variant , user ID DDIC)
09.05.2008 09:22:23 All DB buffers of application server unix0001 were synchronized
09.05.2008 09:22:25 ABAP/4 processor: UNCAUGHT_EXCEPTION
09.05.2008 09:22:25 Job cancelled
=======================================
Kindly advice.
Thanks & regards,
Kunal Patel.

Hello,
I ran a search for this error and found the following notes:
SAP Note 966234 - 70SP10: DTP transport and content error
SAP Note - 1074388 SAPBINews NetWeaver 7.0 BI Support Package 16
Check if they are relevant for your system.
Regards,
Siddhesh

ORA-20211: Active job does not exist, cannot link to job record.

Getting the above error while executing OWB mapping in production environment.
Details of the error :
ORA-20211: Active job does not exist, cannot link to job record.
ORA-06512: at "RADRUN.WB_RT_MAPAUDIT", line 1278
ORA-06512: at "RADRUN.WB_RT_MAPAUDIT", line 2110
ORA-06512: at "RADSTG.MAP_STG_AIRCRAFT", line 2384
ORA-06512: at "RADSTG.MAP_STG_AIRCRAFT", line 2513
RADRUN -- runtime schema
RADSTG -- Target schema where mappings deployed.
source database is accessed through a DB link.
OWB version - 10.1.0.4.0
Oracle - 9.2.0.6.0
Here mappings are getting executed by calling a pl/sql procedure. This pl/sql procedure is executed every day by scheduling a dbms_job. After the error, the job is in hanging.
Last week also the same error happened, on that occasion , restarted the database and re submitted the job. Mapping executed without any error.
Looking for the expert comments

Hi.
See Note:125860.1 in metalink (and please, lol to solution #3). It applies to older OWB versions though... Are you using DBMS_JOB or OEM to run these mappings? If so, then the metalink note might be useful help.
Karesz, I believe if the source database was down, it would fail with an ORA-12XXX Error.
Regards,
Marcos

How do you carry out an event if a job finishes with a return code 4?

Hi
A job which would complete successfully in SAP via the SM36 scheduler completes with an 'Error' in Redwood CPS because there are errors within the spool and it ends with a return code 4.
We don't want this to error in Redwood CPS, so we have set the return code mapping to Completed with entries of 0 and 4.
I.e. whether or not there is an error in the spool, the job will complete successfully in Redwood CPS.
However, we want to be alerted if there are errors in the spool.
How do we do this? The manual says "A job can raise one or more events when the job gets a specific job status or return code" - where is this set? I can see on the 'Event' tab of a job definition you can raise an Event when the job enters a specific status, but I only want to raise an event (or carry out a step / send an email etc) if I get a return code 4 (none of the job statuses are relevant) - how can I do this?
Thanks
Ross

Hi Anton
Thanks for that. However, it's a bit more complicated...
I have a job chain with 2 steps. Any one of the two steps can have an error in the spool which by default in Redwood CPS result in the job ending in status Error. I don't want this, as the second step should still run if the first step ran okay with with errors in the spool (but shouldn't run at all if the 1st step fails completely). I.e. setting 'on Error goto step 2' or having no dependancy at all is not what we want.
Therefore, I set the return code mapping on Completed to return codes 0 and 4. I.e. if step 1 has an error in the spool (return code 4) it still ends as 'Completed' and step 2 runs.
Our problem is that we want to be alerted if there is a return code 4 (error in the spool). I tried as you suggested by entering on the 'Raise Event' tab of the job chain to raise an event on status 'Error' with a return code of 4. But no event was raised. I think this is because the return code mapping is setting the status to 'Completed' (on return code 0 or 4) BEFORE the software checks the status; i.e. the status is actually 'Completed' (rc=4) and not 'Error' (rc=4) so an event is not raised.
Ideally I want to set the Event to be raised on status 'Completed' with a return code 4 - but when I select 'Completed' the 'Error Code' box is greyed out.
I.e. can't set this - I can only set on a generic 'Completed' and I don't want to raise a message if the status is Completed but the return code is 0....
Any ideas??
Ross

I cannot read downloaded E-books on my computor (Windows 7). I am instructed to authorize my digital edition account. When I try to I get the message: Activation Server Error , Code E_AUTH_NOT_READY.

I cannot read downloaded E-books on my computor. I am instructed to authorize my account. When I try to i get the message :Activation server error, Code E_AUTH_NOT_READY

Yes, actually I talk about Digital editions. Do you know how to solve the problem as described in my first mail for Digital Editions? Thanks for your kind assistance.

BPM not activated ,returns code 99

Hi all,
We are running XI 3.0 SR1,when I create a business process it gets activated,but when I test it, it shows "<b>No object type found for this message"</b>
when i check in sxi_cache it shows return code 99 and when i manually try to activate it,it shows <b>xisuper</b> is not registered developer and asks for access key.As far as i know XISUPER has all authorizations and should not ask for acces key.
Any pointers on how to solve this problem are welcome.
Regards,
Rashmi

Apply note 708338 or install a newer patch.
Regards
Stefan

DB13 error -- Function DB6_PLAN_DELETE_BATCH failed with return code = Job

hello All,
when I try to delete or edit any DBA Job in transaction DB13 the following error is displayed:
An error occurred when processing system
Function DB6_PLAN_DELETE_BATCH failed with return code = Job error
How can I fix this error and delete or change my DBA jobs?
My syste is SAP ECC 6.0 SR3 - Solaris 10 - Oracle 10.2.0.4.0
Thanks
Hernando

Hello Hernando,
Let's see what this SAP Note says,
Note 1093883 - ORACLE: Function module DB6_PLAN_ADD_BATCH fails
Edit: However, 'valid release' makes confusion
Regards
Subbarao
Edited by: subbarao chinta on Oct 8, 2009 9:00 PM

DB13 return code = job error

Dear All,
WE are getting followin error while scheduling job in db13 tcode.
Function DB6_PLAN_ADD_BATCH failed with return code = Job error
ECC 6.0
Oracle 10g

You indicated that your database is Oracle 10G. This forum is for SAP on DB2 LUW as the database server. Please post your question on the appropriate forum.
Regards,
Adam Wilson
SAP Development Support
IBM Toronto Lab.

I cannot reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "activation server error, Code: E_AUTH_NOT_READY" What kind of problem is this and what is most important, how can I solve it quickly.

I cannot reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "activation server error, Code: E_AUTH_NOT_READY" What kind of problem is this and what is most important, how can I solve it quickly. I am on holiday and want to read. Thanks for speedy reply.

Yes, actually I talk about Digital editions. Do you know how to solve the problem as described in my first mail for Digital Editions? Thanks for your kind assistance.

Error in transport, job RDDEXECL cancelled, ended with return code: 12

Hi all,
When I am trying to import a request in a BW system from development to quality , it is giving below error:
Program Terminated (job:RDDEXCEL no:11315700) messg no:TR012
Please do needful
Thanks and Regards,
srinivas.m

Hi Gurus,
I have the same error "Error in transport, job RDDEXECL cancelled, ended with return code: 12" (Programa cancelado (job RDDEXECL, nº 09292900)).
I have checked all the steps that are in the "Note 1101187 - The OLAP tunnel" and they are implemented.
Find below the information about my BW system:
SAP_ABA     700     0024     SAPKA70024     Componente multiaplicaciones
SAP_BASIS     700     0024     SAPKB70024     Sistema Base SAP
PI_BASIS     2005_1_700     0024     SAPKIPYJ7O     PI_BASIS 2005_1_700
ST-PI     2008_1_700     0004     SAPKITLRD4     SAP Solution Tools Plug-In
SAP_BW     700     0026     SAPKW70026     SAP NetWeaver BI 7.0
BI_CONT     703     0016     SAPKIBIIQ6     Business Intelligence Content
ST-A/PI     01N_700BCO     0000          -     Servicetools for other App./Netweaver 04
I am trying to transport "Business Content (Statistics)", if this information can help you.
What can i do to solve the problem? I am finding some clue and i dont find anything. It will be much appreciated any idea to solve the problem.
Thanks in advance and kind Regards,
Manuel
Edited by: Manuel Guijarro on Oct 11, 2011 3:46 PM

Cannot Active Job (Return Code 4)

Similar Messages

Maybe you are looking for