Cannot load from BACKUPSTORE issue
Hi,
Hopefully, someone can help with this. I'm in the process of developing a J2EE application. At present it contains one very small stateful session bean. The issue I have regards passivation and removal of this bean. For testing purposes I have set the passivation and removal timeouts to small values as follows:
<bean-cache>
<victim-selection-policy>FIFO</victim-selection-policy>
<cache-idle-timeout-in-seconds>60</cache-idle-timeout-in-seconds>
<removal-timeout-in-seconds>60</removal-timeout-in-seconds>
</bean-cache>
My understanding is that using the above settings will passivate the bean after 1 minute and remove the bean after a further minute.
Passivation appears to be occuring as a message contained within the ejbPassivate method is being written to the server log. However, the problem I'm having is when I then try to access the bean once passivated. I get the following stack trace:
[08/Sep/2004:15:56:16] SEVERE (23316): FIFO-com.syntegra.neg.ejbtesterejb.EJBTesterBean: Cannot load from BACKUPSTORE FOR Key: <de899dfc12>
[08/Sep/2004:15:56:16] WARNING (23316): [FIFO-com.syntegra.neg.ejbtesterejb.EJBTesterBean.1]: Invalid sessionID: de899dfc12
[08/Sep/2004:15:56:16] SEVERE (23316): IOP5011: Exception getting the servant: [javax.ejb.NoSuchObjectLocalException: Invalid Session Key ( de899dfc12)]
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: Exception in thread "service-j2ee-9" org.omg.CORBA.OBJECT_NOT_EXIST: vmcid: 0x2000 minor code: 1807 completed: No
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.enterprise.iiop.POAProtocolMgr.preinvoke(POAProtocolMgr.java:381)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.ee.internal.POA.POAImpl.internalGetServant(POAImpl.java:388)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.ee.internal.POA.POAImpl.getServant(POAImpl.java:309)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.ee.internal.POA.GenericPOAServerSC.preinvoke(GenericPOAServerSC.java:348)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.ee.internal.POA.ServantCachePOAClientSC.initServant(ServantCachePOAClientSC.java:112)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.ee.internal.POA.ServantCachePOAClientSC.setOrb(ServantCachePOAClientSC.java:95)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.ee.internal.iiop.CDRInputStream_1_0.createDelegate(CDRInputStream_1_0.java:760)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.ee.internal.iiop.CDRInputStream_1_0.internalIORToObject(CDRInputStream_1_0.java:750)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.ee.internal.iiop.CDRInputStream_1_0.read_Object(CDRInputStream_1_0.java:669)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.ee.internal.iiop.CDRInputStream_1_0.read_abstract_interface(CDRInputStream_1_0.java:890)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.ee.internal.iiop.CDRInputStream_1_0.read_abstract_interface(CDRInputStream_1_0.java:884)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.ee.internal.iiop.CDRInputStream.read_abstract_interface(CDRInputStream.java:307)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.se.internal.io.IIOPInputStream.readObjectDelegate(IIOPInputStream.java:228)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.se.internal.io.IIOPInputStream.readObjectOverride(IIOPInputStream.java:381)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at java.io.ObjectInputStream.readObject(ObjectInputStream.java:318)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.enterprise.iiop.IIOPHandleDelegate.getStub(IIOPHandleDelegate.java:64)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.enterprise.iiop.IIOPHandleDelegate.readEJBObject(IIOPHandleDelegate.java:39)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.ejb.portable.HandleImpl.readObject(HandleImpl.java:91)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.se.internal.io.IIOPInputStream.readObject(Native Method)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.se.internal.io.IIOPInputStream.invokeObjectReader(IIOPInputStream.java:1298)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.se.internal.io.IIOPInputStream.inputObject(IIOPInputStream.java:908)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.se.internal.io.IIOPInputStream.simpleReadObject(IIOPInputStream.java:261)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.se.internal.io.ValueHandlerImpl.readValueInternal(ValueHandlerImpl.java:247)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.se.internal.io.ValueHandlerImpl.readValue(ValueHandlerImpl.java:209)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.ee.internal.iiop.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:981)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.ee.internal.iiop.CDRInputStream.read_value(CDRInputStream.java:287)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.sun.corba.ee.internal.javax.rmi.CORBA.Util.copyObject(Util.java:598)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at javax.rmi.CORBA.Util.copyObject(Util.java:314)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.syntegra.neg.ejbtesterejb._EJBTester_Stub.getHandle(Unknown Source)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.syntegra.neg.web.ModelManager.getExistingEJBTester(ModelManager.java:178)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.syntegra.neg.web.ModelManager.getTesterEJB(ModelManager.java:121)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.syntegra.neg.web.WebTisRequestProcessor.processRequest(WebTisRequestProcessor.java:191)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.syntegra.neg.web.RoutingControl.doPostOrGet(RoutingControl.java:134)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.syntegra.neg.web.RoutingControl.doGet(RoutingControl.java:91)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:720)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:278)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at java.security.AccessController.doPrivileged(Native Method)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:274)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:203)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:158)
[08/Sep/2004:15:56:16] WARNING (23316): CORE3283: stderr: at com.iplanet.ias.web.WebContainer.service(WebContainer.java:850)
[08/Sep/2004:15:56:16] WARNING (23316):java.io.IOException: Serializable readObject method failed internally
at com.sun.corba.se.internal.io.IIOPInputStream.throwExceptionType(Native Method)
at com.sun.corba.se.internal.io.IIOPInputStream.simpleReadObject(IIOPInputStream.java:274)
at com.sun.corba.se.internal.io.ValueHandlerImpl.readValueInternal(ValueHandlerImpl.java:247)
at com.sun.corba.se.internal.io.ValueHandlerImpl.readValue(ValueHandlerImpl.java:209)
at com.sun.corba.ee.internal.iiop.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:981)
at com.sun.corba.ee.internal.iiop.CDRInputStream.read_value(CDRInputStream.java:287)
at com.sun.corba.ee.internal.javax.rmi.CORBA.Util.copyObject(Util.java:598)
at javax.rmi.CORBA.Util.copyObject(Util.java:314)
at com.syntegra.neg.ejbtesterejb._EJBTester_Stub.getHandle(Unknown Source)
at com.syntegra.neg.web.ModelManager.getExistingEJBTester(ModelManager.java:178)
at com.syntegra.neg.web.ModelManager.getTesterEJB(ModelManager.java:121)
at com.syntegra.neg.web.WebTisRequestProcessor.processRequest(WebTisRequestProcessor.java:191)
at com.syntegra.neg.web.RoutingControl.doPostOrGet(RoutingControl.java:134)
at com.syntegra.neg.web.RoutingControl.doGet(RoutingControl.java:91)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:720)
at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:278)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:274)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:203)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:158)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:850)
[08/Sep/2004:15:56:16] WARNING (23316):
org.omg.CORBA.MARSHAL: Unable to read value from underlying bridge : Serializable readObject method failed internally vmcid: SUN minor code: 211 completed: Maybe
at com.sun.corba.ee.internal.iiop.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:989)
at com.sun.corba.ee.internal.iiop.CDRInputStream.read_value(CDRInputStream.java:287)
at com.sun.corba.ee.internal.javax.rmi.CORBA.Util.copyObject(Util.java:598)
at javax.rmi.CORBA.Util.copyObject(Util.java:314)
at com.syntegra.neg.ejbtesterejb._EJBTester_Stub.getHandle(Unknown Source)
at com.syntegra.neg.web.ModelManager.getExistingEJBTester(ModelManager.java:178)
at com.syntegra.neg.web.ModelManager.getTesterEJB(ModelManager.java:121)
at com.syntegra.neg.web.WebTisRequestProcessor.processRequest(WebTisRequestProcessor.java:191)
at com.syntegra.neg.web.RoutingControl.doPostOrGet(RoutingControl.java:134)
at com.syntegra.neg.web.RoutingControl.doGet(RoutingControl.java:91)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:720)
at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:278)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:274)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:203)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:158)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:850)
Previously using IPlanet 6 we did not receive such a stack trace. Is this simply because we are now using a later JVM and this stack trace is to be expected?
Thanks,
Emma.
I have finally discovered the cause of this problem. A class file is available to the EJB's client, but not to the EJB.
It seems we have decided to use pass-by-reference with our EJB (in sun-application.xml). So when an EJB method is called with such an object for an argument, no copy needs to be created, and we do not get any class loading errors.
The EJB can hold and use the object, and even passivate it without problem. However, when the EJB container needs to restore the passivated EJB a java.lang.ClassNotFoundException is thrown if the class file is not available. Oddly this exception is only seen in the log if logging is set to FINIEST, but this leads to the "Cannot load from BACKUPSTORE" message, the javax.ejb.NoSuchObjectLocalException, the org.omg.CORBA.OBJECT_NOT_EXIST, and the java.rmi.NoSuchObjectException.
Similar Messages
-
BootCamp cannot load from disk code 5
I tried to install Windows 7 using BootCamp from an ISO image DVD I made. Now when I restart my iMac, it takes me to a black screen with the "cannot load from disk code: 5" error message. The "option key" and "eject key" don't work at all and no matter how many times I restart it, it always goes back to this screen where I can't seem to press anything and the dvd is stuck. Please help.
I burned my disc at 2 speed in Toast. Burned my XP iso like this too, and that worked (not on early 2011 mbp's)
I even deleted the bootcamp partition and resized the osx partition to the max. That way i have a clean partition/install each time i trie. Used partition size is standard (20gb) so that shouldn't be an issue. And the iso i'm using for win7 is being used by al lot of others and they seem to have no problems and claim it to be a bootable disk.
The only probable solution i've found is a workaround in which you launch your install from a different running OS, and go from there. However i'm not such a windows fan i got a full working pc. Just my mbp's so this really isn't an option and it seems a bit far off because i got a concrete error code.
I'll try to get a copy of parallels to test my iso, but i don't want to emulate, i just need boot camp to work! -
Hi Friend,
I am loading data from LDAP to my SIM using Load from Resource option. But when ever I get users there first name and last name become accountID. I want user uid should accountID in IDM.
Can some guru throw some light on it
ThxI mapped accountID to CN. I changed it and mapped it back to uid
Thank you
Vivek Shashwat -
ITunes library cannot load from NAS - Asking password when it should not...
Hi all,
I just updated from Windows 8 to Windows 8.1, worst idea ever. Tons of problems appeared including this really strange one.
iTunes, for a reason or another, decided to reset my library path, which mean all my songs have the "!" symbol in front, saying iTunes cannot find it. So I went in the preference menu to change it back to what it was (it was on the default folder now). My library was running from my NAS drive, using the "Z" letter on my computer. When I click on the button to change the library folder and select my NAS (it appear in the "Network" field), it ask for a password. Still, there is no password on the NAS, and I have no problems opening the NAS from the network menu BUT from the itunes options...
I tried using my NAS admin account (didnt work), windows account (didnt work), admin admin (didnt work).
What is the most frustrating is that I can go see the files and play them from the NAS on my computer, it's just itunes that is completly broken for no reason...
Is there AT LEAST a way to force itunes to change the folder from a file or something?
Thanks a lot for the help in advance guys.
PS: Really, this is the last time. If I loose my library I will never use itunes again... I'll find any crappy program that can surely not do better, but at least work...try double clicking a song with a !
in the resulting pop up hit locate
browse to the location of the song and select it
in the next pop up tell it yes to use the location of that song to find other items -
Windows 7 not loading from external drive
I traded out my optical drive for an ssd with the hopes of installing Windows 7 Home using a legit disk (32-bit). My attempts with using Boot Camp Assistant have led to a black screen with a blinking cursor. Assuming that Windows cannot load from the now external drive, is there another solution?
You cannot install nor boot Windows from an external drive.
-
Web browsers hang when trying to save or load from Finder
It appeared some time ago, but didn't happen so frequently. Now I cannot load from or save to Finder almost never. When Finder opens up in any browser (Chrome, Safari, Mozilla) the browser immediately hangs. Sometimes rebooting of the laptop helps, but not always and only for some short time.
Try uploading a photo to a reply here by placing it on the Desktop and then dragging it to the Reply window. I've been having trouble with Safari not uploading the file if I use the camera icon on various forums and with Firefox crashing if I even attempt to upload a photo. Maybe we can tackle this together.
Clinton
MacBook Pro (15-inch Late 2011), OS X Mavericks 10.9.5, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display -
Cannot load Lightroom 2.0 and G-Tech drives
I just bought the new Mac-Air, really great! But I found a couple of interesting problems: I cannot load from a valid disk, Lightroom 2, the desktop will first show the disk as a drive, and as it loads, I get an error message. The other is: none of my G-Tech drives will load, they light up, but never appear on the desk top. Any help would be appreciated.
I'm afraid I don't have any real ideas.
If you look at About this Mac -> System Report ....Hardware - USB do you see anything about the drive??
Something like this??
Others do seem to have problems..Here, Here
and elsewhere.
Does the drive appear in Disk Utility??
Steve -
Dear all,
We are expriencing an error after a redirected restore, we are restored a backup of a prod system on a new host.
While running a 'brrestore' command to get the restore, it returns the following error:
BR0401I BRRESTORE 7.40 (8)
BR0169I Value 'util_file_online' of parameter/option 'backup_dev_type/-d' ignored for 'brrestore' - 'util_file' assumed
BR0405I Start of file restore: reojarkx.rsb 2014-07-23 16:48:47
BR0484I BRRESTORE log file: /oracle/SID/sapbackup/reojarkx.rsb
BR0278E Command output of '/oracle/SID/112_64/bin/sqlplus':
exec(): 0509-036 Cannot load program sqlplus because of the following errors:
0509-130 Symbol resolution failed for sqlplus because:
0509-136 Symbol ___strcmp64 (number 71) is not exported from
dependent module /usr/lib/libc.a[shr_64.o].
0509-136 Symbol ___strcpy64 (number 76) is not exported from
dependent module /usr/lib/libc.a[shr_64.o].
0509-136 Symbol __setjmp (number 78) is not exported from
dependent module /usr/lib/libc.a[shr_64.o].
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
BR0280I BRRESTORE time stamp: 2014-07-23 16:48:47
BR0279E Return code from '/oracle/SID/112_64/bin/sqlplus': 255
BR0302E SQLPLUS call for database instance SID failed
BR0406I End of file restore: reojarkx.rsb 2014-07-23 16:48:47
BR0280I BRRESTORE time stamp: 2014-07-23 16:48:47
BR0404I BRRESTORE terminated with errors
Can someone help to get the reason of this issue.
Thanks, regardsRoman,
how can you know that it is about AIX? The OP didn't tell us.
Besides that, I agree that different OS versions may be the root cause.
regards -
Kernal Panic: Cannot load OS X from any Internal Drive
On Sunday evening I opened my trusty Macbook Pro 7,1 (13" Mid 2010) and all had locked up. Nothing would respond - just a beachball. I powered off and attempted to start back up again. It went straight to recovery. Disk Utility reports a fault with the Hard Drive's EFI Partition. I cannot load hardware diagnostics - screen shot attached of error
I swapped out the Hard Drive and attempted to reinstall via internet recovery however this would fail at the point of starting the Yosemite installation. (a not very helpful message from memory). The date was set correctly.
If however I mount the drive via USB I can reinstall Yosemite just fine and run OS X perfectly normally from USB. If I take that disk and install it internally OS X wont load and I get the Kernel Panic Below.
Anonymous UUID:
E4C66E36-4C11-B193-6400-263851954BFF
Wed Feb 25 12:17:50 2015
*** Panic Report ***
panic(cpu 1 caller 0xffffff80197c1694): "launchd died\nState at Last Exception:\n\n"@/SourceCache/xnu/xnu-2782.10.72/bsd/kern/kern_exit.c:361
Backtrace (CPU 1), Frame : Return Address
0xffffff811937be50 : 0xffffff801932fe41
0xffffff811937bed0 : 0xffffff80197c1694
0xffffff811937bf40 : 0xffffff80197c135c
0xffffff811937bf50 : 0xffffff801984b386
0xffffff811937bfb0 : 0xffffff8019436e86
BSD process name corresponding to current thread: launchd
Mac OS version:
14C109
Kernel version:
Darwin Kernel Version 14.1.0: Mon Dec 22 23:10:38 PST 2014; root:xnu-2782.10.72~2/RELEASE_X86_64
Kernel UUID: DCF5C2D5-16AE-37F5-B2BE-ED127048DFF5
Kernel slide:
0x0000000019000000
Kernel text base: 0xffffff8019200000
__HIB text base: 0xffffff8019100000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 84906043459
last loaded kext at 2639784069: com.apple.driver.AppleUSBTCButtons 240.2 (addr 0xffffff7f9b1ea000, size 20480)
loaded kexts:
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleIRController 327.5
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.7.0
com.apple.iokit.SCSITaskUserClient 3.7.3
com.apple.driver.AppleUSBCardReader 3.5.1
com.apple.iokit.AppleBCM5701Ethernet 10.1.3
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AppleUSBHub 705.4.2
com.apple.driver.AppleUSBOHCI 656.4.1
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleAHCIPort 3.1.0
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.3
com.apple.iokit.IOUSBMassStorageClass 3.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.3
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IO80211Family 710.55
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.driver.AppleMCP89RootPortPM 1.11
com.apple.iokit.IOAHCIFamily 2.7.5
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOUSBFamily 710.4.14
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 396
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 8 GB, SMC 1.62f7
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54333531533641465238432D47372020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54333531533641465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.2f6 15235, 3 services, 27 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
USB Device: Internal Memory Card Reader
USB Device: HD-PCTU3
USB Device: Built-in iSight
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: IR Receiver
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus:
I reckon that this will be a hardware error however as for where I cannot say. Anyone able to offer advise?Generally if you can boot the MBP from an external HDD and not boot the MBP with that drive internally, the SATA connection is usually the problem. Replacement of the cable will usually solve the issue.
I suggest that you take the MBP to an Apple store genius bar for a definitive evaluation. The repair is not expensive.
Ciao. -
Cannot load component class className from project: ProjectName
Hi guys,
I've a strange issue.
I found some solutions on google and on this forum, but they doesn't work for me.
I've a javafx application in netbeans in which I also use swing controls.
I created a custom jlabel control
public class Label extends JLabel {
public Label()
private void setAspect(String csFontName, int nSizeFont, boolean bold,Color cColor)
int style=bold ? Font.BOLD : Font.PLAIN;
this.setFont(new Font(csFontName,style,nSizeFont));
this.setForeground(cColor);
public Label(String csText)
super(csText);
setAspect("Tahoma",10,false,Color.black);
public Label(String csText, int nSize)
super(csText);
setAspect("Tahoma",nSize,false,Color.black);
public Label(String csText, int nSize, boolean bold)
super(csText);
setAspect("Tahoma",10,bold,Color.black);
public Label(String csText, int nSize, boolean bold, Color cColor)
super(csText);
setAspect("Tahoma",10,bold,Color.black);
}I selected Label.java file in the project and I click on Tools->add to palette and I selected Swing controls as family.
I restarted netbeans and I found it in the palette.
I try to drag it into my swing form and I've :
Cannot load component class <ProjectName>.Label from project: D:\Progetti\<ProjectName>.
The class must be compiled and must be on the classpath of the project to which this form belongs.Following forums I went on netbeans log
org.openide.ErrorManager$AnnException: msg
at org.openide.ErrorManager$AnnException.findOrCreate(ErrorManager.java:870)
at org.openide.ErrorManager$DelegatingErrorManager.annotate(ErrorManager.java:653)
Caused by: java.lang.ClassNotFoundException: <ProjectName>.Label
at org.netbeans.modules.form.project.ProjectClassLoader.findClass(ProjectClassLoader.java:178)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at org.netbeans.modules.form.project.FormClassLoader.findClass(FormClassLoader.java:83)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:247)
at org.netbeans.modules.form.project.ClassPathUtils.loadClass(ClassPathUtils.java:98)
at org.netbeans.modules.form.MetaComponentCreator.prepareClass0(MetaComponentCreator.java:1322)
... 34 more
msg
Cannot load component class ortholab2.Label from project: D:\Progetti\<ProjectName>.
The class must be compiled and must be on the classpath of the project to which this form belongs.I hope someone can help me ,
ThanksThat sounds more like a NetBeans-specific question, not a general java programming question.
Plus, your desciption is inconsistent:
Cannot load component class <ProjectName>.Label from project: D:\Progetti\<ProjectName>.
Cannot load component class ortholab2.Label from project: D:\Progetti\<ProjectName>What is the fully-qualified name of this class: ortholab2.Label ? ortholab2 being both the package name and the project name?
And where do you use it, in the same project or in yet another NetBeans project? -
Issue with load from livecache
Dear all
In our APO system we have encountered a strange issue with data loaded from livecache into the infocube.
Problem is in the infocube, where there are two requests with a forecast version data with the same amount of data.
When I look in my infocube in APO I see e.g. the two following request IDs for a given product:
REQU_4CZ4SQ5PSM9V5PHJCHTIS24GK is the most recent load from Livecache (replacing any previous livecache loads).
APO_R43U3KZLM0V3WVK112YEK3KKLE cannot be located. It is not available on the infocube manage section
Ultimately this results in double data for this given product.
Do any of you have an idea as to what this APO_* request could be triggered from?
This is the input from the BW-team:
This indicates that an APO program has modified the infocube data without updating the request tab of the manage infocube. But it has updated the request id of the data which is transformed. With subsequent loads into the infocube, these records are split based on different request idu2019s, and loaded collectively into BI.
I hope you can help me out.
Best regards,
Anders ThinggaardHi Visu
It seems I made a typing error in my description of the problem. It is of course the DESTINATION combination, not the SOURCE combination, that is written into the infocube when realigning on the infocube.
This, of course, creates the request ID starting with APO. Besides that I get the request starting with REQU when I load from livecache using an infopackage. So far so good.
What confuses me though is that when I load back into livecache (load my planning area) is seems to pick up the correct amount of data (not taking the APO* request into account) whereas my load to my external BW out of my APO infocube seems to pick up both the REQU* and the APO* requests, resulting in dublicate data.
Have you had this challenge as well?
My first idea is to make the BW team make some ABAP coding leaving out any request ID starting with APO*. However it seems to me that this is a stardard functionality of APO, and I'd like to get to the bottom of this...
Best regards,
Anders
P.S. As I understand, the copy logic only dertermines whether data from source combination is added to or overwriting the data for the destination combination. -
Cannot load any content from Appletv. Message: Error - content not loading
Cannot load any content from Appletv. Message: Error - content not loading
Hello yogac,
The following article can help resolve many network issues that can cause symptoms such as inability to load content.
Apple TV: Troubleshooting wireless connections
http://support.apple.com/kb/HT1595
Cheers,
Allen -
Issue with a load from R3 to BW 3.5
Hi Guys,
We are having an issue here with a load from R3 to BW 3.5 to an ODS and
a transactional infocube.
In a daily basis we are running loads to BW from R/3 infosets and all
of them but one loads fine.
The one that is having problems is actually the one that loads more
data, therefore the infopackage is divided into two infopackages.
In the update rule of the first ODS we are running an initial routine
in which we are doing a RSDRD_SEL_DELETION (selective deletion) of the
data to be loaded to both the ODS and the infocube, and is actually
here where we got the core dump.
Our first assumption was that maybe there was any yellow request in the
transactional infocube avoiding the selective deletion but we have
discarded this.
We think that, as the only one failing is the one that divides into two
infopackages, the problem might be that at the moment that the first is
triying to delete the second one is loading data into the ods and there
we get the dump.
The question here is ¿Could this be the problem? ¿How could we
workaround this if this is the case?
Thanks for any suggestion.Hi,
Be carefull on ODS activation, if you're using 2 infopackage and/or deleting data from an ODS which is lock for an activation, you'll occurs a dump.
Check SM12 / ST22 / SM21 and job logs in SM37.
And if pb still occurs for a load, debug it in start routine.
Regards, -
Error while activating DSO after loading from another DSO..Production issue
Hello Gurus,
I got an error while activating DSO2 after loading from another DSO1.
DSO1 load and activation was sucessful but while loading from DSO1 to DSO2 load was fine but got error while activating...
>Error when assigning SID: Action VAL_SID_CONVERT table ZWEEK_NUM
>Value u201809u2019 of characteristic ZWEEK_NUM is not a number with 000004 spaces
this theard was posted after searching for related post in SDN.
and i tried Function Module RSODS_CHECK_RSODSACTUPDTYPE but it is not available .. but I used this in BW 3.10u2026..
is their any similar Function Module in BI 7.0 please advice.
We are using SAP NetWeaver BI 7.0
Release- 700 Service level- 017
Thanks in advance
Sandysloved the issue......
it was due to wrong data for the related field...
it must be "0009 "
Thanks for ur support. closing the ticket
Regards
Sandy -
Java Plug in fatel Error The java Runtime Environment cannot be loaded from
Java Plug in fatel Error The java Runtime Environment cannot be loaded from <\bin\server\jvm.dll>
files are left behind when you uninstall Java from Windows XP.
Directory of C:\Documents and Settings\user1\.java
10/14/2004 06:02 PM <DIR> .
10/14/2004 06:02 PM <DIR> ..
03/07/2005 07:10 PM 32 jpicerts130_02
09/19/2004 04:37 PM 32 jpicerts141_02
09/19/2004 04:37 PM 32 jpihttpscerts141_02
03/07/2005 07:10 PM 549 properties130_02
09/19/2004 04:37 PM 383 properties141_02
5 File(s) 1,028 bytesHow do i fix it
Maybe you are looking for
-
Hi, I have created a sample prog for module pool. I took a button on layout. in flow logic okcode like sy-ucomm. case okcode. when 'button'. write:/'sffs'. endcase. And i have created the tcode also. while trying to exe it is giving msg as GUI CAP
-
Wireless scanning of Canon Pixma MX 725 doesn't work in 10.9.1
Hello, the built-in wireless scanning feature of Canon Pixma MX 725 doesn't work in 10.9.1. With USB-Connection everything is fine. Latest Apple Drivers are installed (Canon IJScanner5 version 2.3.1). I've also tried the new verison IJScanner5 3.1. W
-
Print a screen of a custom transaction.
Hi ABAPers, How to print that particular dialog screen on which I have the PRINT icon.which FM has to be used to print that particular screen.Kindly help
-
How do I use Render Flames to add flames to unlit fireplace?
Hello all, I am trying to learn how to realistically add flames to an unlit fireplace. I saw a tutorial online http://mobile.digitalartsonline.co.uk/tutorials/photoshop/use-render-flames-add-realistic- fire-in-photoshop-cc-2014/ was using Render Fla
-
Adding a new DNS zone to OD master for use as mail server
hi all, i recently migrated form apple's postfix to kerio mail server. i am usung an xserve to run OD master, DNS, Jabber, Windows PDC and kerio mail. server name is mail.domain1.com and i am hosting it on local IP 192.168.0.4 and using NAT on my fir