Cannot load gpib-32.dll
"I replaced the GPIB-32.dll file dated 1/26/98 with one dated 7/29/99 in order to fix the "cannot load gpib-32.dll" error. Now I can register it, but I get the error "c:\windows\gpib-32.dll was loaded but the DLLRegisterServer entry point was not found. DLLRegisterServer may not be exported, or a corrupt version of c:\windows\gpib-32.dll may be in memory. Consider using Pview to detect and remove it. When I attempt to run my application windows crashes, but returns after hitting enter."
Chris,
For information concerning language interfaces and GPIB go to the following path:
ni.com>>resource library>>gpib>>programming>>language interfaces
Best Regards,
Chris D
Similar Messages
-
Unable to load gpib-32.dll when running the visual basic 2008 program
I installed NI-488.2 into my PC, window 7 64 bit OS.
In the program >> project> add reference>.NET, I successfully add the NI.4882 into my visual basic program.
By the way, this program worked well in another window 7 32 bit PC.
But when I run the program at ildev(BDINDEX,.........), error comes up as "unable load DLL gpib-32.dll".
So when I looked at c:\windows\system32, I can not fine gpib-32.dll.
Doesn't NI-488.2 driver install gpib-32.dll?
How can I install gpib-32.dll?SeongCho wrote:
Nyc, thank you for your reply.
By the way, I think I did all the link explained.
So I have no problem in adding NI488.2 to my program's reference using "add reference".
The problem is GPIB statement like ildev() looks for "gpib-32.dll".
But there was no gpib-32.dll installed in "c:\windows\system32" so error comes up with "unable to load gpib-32.dll".
I did the same procedure in my another PC(window 7 32 bit OS,my current PC is window 7 64 bit OS), and in that PC I can see the gpib-32.dll in that directory and program run without problem.
I do not know how gpib-32.dll was installed in my previous PC.
Thanks
Seong
Have you looked at the example programs for .NET that install with NI-488.2?
You need to start thinking in terms of .NET -
Within Firefox and websites visited within Firefox, whenever I try to print using my Lexmark Z605 printer, the error message "Cannot load library LXBCPRP.DLL, using default '' appears. The printer works fine from other programs and indeed worked fine from within versions of Firefox before 4.0.1, and I have even updated drivers from Lexmark, but the problem persists.
Thanks for your time, but I maintain my position. There has been no problem with my printer from purchase (5+ years ago) until Firefox 4, in particular no problem with Firefox 3.x. I have no problem with ANY other applications I use now and have run through them all to check.
Firefox 4.0.1 remains the prime suspect, but I am willing to try any fix that the wonderful members of Firefox community may care to suggest. -
Cannot load installer NiD16CI.DLL see hardware vendor
Setup cannot load the installer NiD16CI.DLL for the device GpibHw hardware being installed. contact your hardware vendor.
Hello,
Could you give a more detailed description of what is happening? Do you get this error when installing the driver or when plugging the hardware? What hardware do you have? What OS? What driver version? Is this an upgrade?
If it is an upgrade, please uninstall the previous driver, then reboot, and then install the new driver.
If it is a new install and you are installing from a CD, copy the content of the Disk to your Hard Disk or to a computer on the Network and then install it from there. The reason for this is that sometimes there are some problems when getting the data from the CD unit.
Check that the software or driver is the correct one for the OS and the hardware.
Here is a link to the driver's page
sions.htm> GPIB Drivers
Hope this helps.
Ricardo S.
National Instruments. -
Cannot Connect to Oracle, PHP cannot load oci dlls
Hello,
I have installed wamp on windows server, and oracle 9, When I try to connect to oracle in php I get:
Fatal error: Call to undefined function oci_connect() in C:\wamp\www\project2\index.php on line 3
Also when I start wamp, it cannot load the oci dlls found on:
C:\wamp\bin\php\php5.3.0\ext
I have configured the php.ini file and commented as much options
extension_dir = "C:/wamp/bin/php/php5.3.0/ext/"
extension=php_oci8.dll ; Use with Oracle 10gR2 Instant ...
extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
extension=php_oracle.dll
extension=oci8.so
I am unable to either connect to the database through php, also when I start wamp, i get pop up windows that it cannot load the dynamic procedures related to oracle: php_oce.dll, php_oce8.dll, php_pdo_oci,
I have even eddited the http.conf file
Also have done this:
•Add the following entries to the "C:\Apache\Apache\conf\httpd.conf" file:
LoadModule php4_module c:\php\sapi\php4apache.dll (approx line 193)
AddModule mod_php4.c (approx line 241)
AddType application/x-httpd-php .php (approx line 851)
I have included the phpinfofile attached as well, part of it below is:
System Windows NT SELECAO 5.2 build 3790 (Windows Server 2003 Standard Edition Service Pack 2) i586
Build Date Jun 29 2009 21:23:30
Compiler MSVC6 (Visual C++ 6.0)
Architecture x86
Configure Command cscript /nologo configure.js "--enable-snapshot-build" "--disable-isapi" "--enable-debug-pack" "--with-pdo-oci=D:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8=D:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8-11g=D:\php-sdk\oracle\instantclient11\sdk,shared" "--with-enchant=shared"
Server API Apache 2.0 Handler
Virtual Directory Support enabled
Configuration File (php.ini) Path C:\WINDOWS
Loaded Configuration File C:\wamp\bin\php\php5.3.0\php.ini
Configuration
apache2handler
Apache Version Apache/2.2.11 (Win32) PHP/5.3.0
Apache API Version 20051115
Server Administrator admin@localhost
Hostname:Port localhost:80
Max Requests Per Child: 0 - Keep Alive: on - Max Per Connection: 100
Timeouts Connection: 300 - Keep-Alive: 5
Virtual Server No
Server Root C:/wamp/bin/apache/Apache2.2.11
Loaded Modules core mod_win32 mpm_winnt http_core mod_so mod_actions mod_alias mod_asis mod_auth_basic mod_authn_default mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_autoindex mod_cgi mod_dir mod_env mod_include mod_isapi mod_log_config mod_mime mod_negotiation mod_setenvif mod_php5I get this error, i decided to change directory for oracle_home
putenv("ORACLE_HOME=C:/oracle/product/10.2.0/db_1/bin");
to
putenv("ORACLE_HOME=C:/oracle/product/10.2.0/db_1");
it functioned.
my code
<?php
putenv("ORACLE_HOME=C:/oracle/product/10.2.0/db_1");
putenv("ORACLE_SID=PLSExtProc");
$user ="name"; // set user
$senha="password"; // set password
$banco="(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=TCP)
(HOST=127.0.0.1)(PORT=1521)
(CONNECT_DATA=(SERVICE_NAME=orcl))
)"; // configuracoes do banco (isso muda um pouco no oracle)
if ($conexao = OCILogon($user,$senha,$banco))
echo "Conexão bem sucedida.";
else
echo "Erro na conexão com o Oracle.";
?> -
Having problem creating cd cover.When I try to print one out only text print no picture. Error message appears "cannot load library"LXBBPRP,DLL Default error126. Anyone have a solution to this problem?
One other note I do have parallels installed but not running on both machines.
Make sure on both machines that even if Parallels is not running that the two VPNs it creates in System Preferences > Network are set to Off.
Also make sure that in System Preferences > Sharing that Internet Sharing is nnot ON.
Later you will have to adjust the Parallels setting to NOT Share the Mac IP.
10:18 PM Sunday; June 1, 2008 -
Error while creating database - Cannot load backend library 'oci.dll'
Hi all,
I am newbie to Timesten imdb (in memory database). I do not wish to use oracle rdbms.
I have installed the Timesten IMDB on Win2003.
E:\TimesTen\tt70_32\bin>ttVersion.exe
TimesTen Release 7.0.5.0.0 (32 bit NT) (tt70_32:17000) 2008-04-05T00:54:16Z
Instance admin: m4sadm
Instance home directory: e:\TimesTen\tt70_32
Daemon home directory: e:\TimesTen\tt70_32\srv\info
While installing, I followed the viewlet at: [http://www.oracle.com/technology/products/timesten/viewlets/tt70_install_win_viewlet_swf.html]
Now, I am planning to create a database, and so following the viewlet at: [http://www.oracle.com/technology/products/timesten/viewlets/tt70_create_db_win_cc_viewlet_swf.html]
However, when I give the command (according to the viewlet), I get the following error:
Command> select * from v$version;
5102: Cannot load backend library 'oci.dll' for Cache Connect. OS error message '<empty>'.
The command failed.
Can anyone provide pointers to resolve this?I'm guessing you chose No to the install question about using Cache Connect to Oracle? This would cause certain libraries not to be installed at install time, specifically libraries that would enable you to use TimesTen Cache Connect to cache data from Oracle tables.
The table "v$version" that you use in your select
select * from v$version
only exists on an Oracle RDBMS. It doesn't exist on TimesTen. Moreover the second viewlet you refer to is about using the TimesTen Cache Connect feature to cache tables from Oracle RDBMS. If you're not interested in using Oracle RDBMS, as you say, it would be my assumption that you're also not interested in using the TimesTen Cache Connect feature? So I'm a little confused here about your intentions. Are you interested in using TimesTen as a standalone datastore, or do you want to use it to cache data from tables located in an Oracle RDBMS?
Thanks. -
I cannot load the latest version of Itunes on my Toshiba PC with Windows 7 Home Premium. Tried to re-install. Dead in the water. Windows error 126. Cant start becasue MSVCR80.dll is missing from my computer
You may have to follow the slightly more detailed steps in whichever of these two applies to you.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Rebooting into safe mode may be needed to delete any folder the instructions say you should remove. You may also find this Microsoft Fixit helps to remove stubborn components. It has taken some people several attempts to completely clean iTunes and supporting software before they have been able to successfully reinstall it.
tt2
Message was edited by: turingtest2 -
Error Opening After Effects CS3 - cannot load AERes1.dll
Hello,
When I try to open After effects I get this Error "cannot load AERes1.DLL"
I tried to reinstall after effects and it didnt dfix the problem.
I uninstalled the entire Master collection CS3 and reinstalled and the problem didnt solve.
I could open After Effects in the past.
Any suggestions?OK so this is how I solved the problem if anyone encounter it ever again...
Uninstalling and reinstalling the CS3 won't help.
The problem happens probably because of quicktime installed prior to the CS3 updates. I didnt try to remove quicktime. I formatted my PC and luckly I had an image of my c: drive from the time I installed the cs3 and prior to the time I installed Quicktime. So I made all Adobe Cs3 updates first and only than installed Quicktime.
Now After Effects works.
If anyone finds a way to solve this without formatting c: drive, let me know.
Ariel E. -
Dear All,
Getting following error while trying to start http server service.
"Syntax error on line 1 of d:\oracle\oracle\apache\apache\conf\mod_ose.conf
Cannot load d:\oracle\apache\apache\apache\modules\orajipa8i.dll into server"
Pls tell me the work arounds.
Thanks,
Sathis.I am getting the same error message on my side.
Were you able to get around the problem? Thank you. -
Hello:
I just installed the 64-bit version of 11g Release 1 (11.1.0.6) on a server that is running 64-bit Windows 2003 Server.
The installation was successful and I checked using SQL Plus. I am able to log and execute queries. I am also able connect using SQL Developer.
However, when I tried to use SQL Navigator (version 6.1) or Toad 10.0, I get an error message "... Cannot load OCI.DLL".
When I tried to install another COTS product, it complains that it was unable to find Oracle Client and/or Oracle OLE Objects.
I was trying both the tasks on the server itself.
Any ideas on how I can resolve the issues?I have the same problem: Oracle 11 R2 on Solaris x86-64 and Oracle client (11.1.0.7.0 x64, unfortunately, there's no client higher than that version.). After installing TOAD 10.1 i've checked client connection:
SOFTWARE\WOW6432NODE\ORACLE (Oracle Root)
ORACLE_HOME_NAME:
ORACLE_HOME: C:\app\User\oracle
ORACLE_SID:
NLS_LANG:
SQLPATH:
LOCAL:
C:\app\User\oracle\Bin exists.
C:\app\User\oracle\Bin is in PATH.
Client DLL: C:\app\User\oracle\Bin\oci.dll
Client Version: 11.1.0.7.0
Home is valid.
So, TOAD can see the client, but when i'm trying to connect it i got an error:
Cannot load OCI DLL: oci.dll
Any suggestions? -
I have installed j2sdk 1.4.2, on windows ME. it seems to have installed ok, but when i try to run it, i just get a message saying "cannot load jvm.dll" Any suggestions?
I have installed j2sdk 1.4.2, on windows ME. it seems
to have installed ok, but when i try to run it, i just
get a message saying "cannot load jvm.dll" Any
suggestions?Are you using NetBeans?
If yes, look here:
http://forum.java.sun.com/thread.jsp?forum=14&thread=434036 -
ACROBAT CANNOT LOAD IT'S CORE DLL - ACROBAT CANNOT LOAD IT'S CORE DLL
Is there a person who works for Adobe answering questions in THEIR own forum about THEIR own software? If so, why hasn't an employee of Adobe answered this question about the core dll not loading? It certainly appears there are a lot of Adobe CUSTOMERS who are experiencing this issue and is worthy of some time from an Adobe employee to get it resolved!
ACROBAT CANNOT LOAD IT'S CORE DLL
ACROBAT CANNOT LOAD IT'S CORE DLL
ACROBAT CANNOT LOAD IT'S CORE DLLHere is the advice Adobe finally gave me:
Create a test PDF and attempt to reproduce the issue to verify that it
is not a file specific issue.
To create a test PDF file:
1. Open the Printers and Faxes Control Panel from the Start Menu.
2. Right-click on Adobe PDF and select Properties.
3. Select Print Test Page and save the PDF to the Desktop.
If the issue does not occur, then there is an issue with the original
file. You will either need to troubleshoot the content of the file or
try to recreate it.
If the issue persists with the test file, then it is possible that the
Acrobat preferences have become damaged. Reset the Acrobat
preferences and then attempt to reproduce the issue.
To reset the Acrobat preferences:
1. Exit all instances of Acrobat.
2. On the keyboard, hold down the Windows logo key and tap the #R#
key. This will open the Run dialog box.
3. Copy the following text into the Open field and press the OK
button:
%Appdata%\Adobe
4. Rename the #Acrobat# folder to #Acrobat old#.
5. On the keyboard, hold down the Windows logo key and tap the #R#
key.
6. Copy the following text into the Open field and press the OK
button:
regedit
7. Right-click on My Computer, select Export and then save the file
as #Registry Backup# to the Desktop. This creates a backup of the
registry.
8. Browse to: HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat.
9. Right-click on the 8.0 folder and select Rename.
10. Change the name from 8.0 to 8.0 old.
11. Close the Registry Editor.
12. Launch the Acrobat application and attempt to reproduce the
issue. Acrobat creates new preference directories.
I implemented their suggestions, however the registry key of HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat that they gave me was incorrect as ours is: HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\PDFMaker\8.0
I went ahead and renamed it to 8.0.old as instructed so time will tell if the Acrobat Cannot Load It's Core Dll error message goes away. -
Cannot Load modplsql.dll into server
Hi all,
I am unable to get the Oracle Forms and reports running because I cannot get the OC4J started. The OC4J is in an Oracle Application Server Environment.
I have gone into 'ORACLE_HOME/opmn/bin' directory and excuted 'opmnctl startall'
But I always get the following error:
11/08/23 11:35:01 Start process
Syntax error on line 9 of c:/oracle/frhome_1/apache/modplsql/conf/plsql.conf:
Cannot load c:/oracle/frhome_1/bin/modplsql.dll into server: (126) The specified module could not be found:
The have followed the path and modplsql.dll does not exist. I cannot find this file anywhere, i have searched the whole of C drive. I don’t know what to do to get OC4J started.
I should tell you the domians have been changed which is one of the reason for all of these problems. i have changed the domain names in all config files by searching for the old domain name. The listeners and tsnames have all benn changed. The database server is now up and running and i can connect to it from the application server using SQLPlus. But Oracle Forms and Reports fails to start.
I have tried to run the Enterprise manager but that never starts. 'Internet Explorer cannot find webpage' always gets displayed. This is true for both the database and Application servers. (Database and Forms and reports are installed to two different servers)
The truth is I don’t know much about Oracle. I am trying to get this up and running after this company moved locations.
Please help me. Any help will be greatly appreciated.
Kindest regards,
ImranI too have this problem. Did you solve it? How?
-
Download error cannot load the DLL (pdh dll)
I've tried and tried several times to download Skype but half way through the down load I get the following error message: cannot load the DLL (pdh.dll)
Try to run System File Checker tool (sfc /scannow): http://support.microsoft.com/kb/929833
Maybe you are looking for
-
Sharepoint Foundation 2010 install fails on Windows 2012 R2 server
Microsoft kb article at https://support.microsoft.com/kb/2724471/ is saying we need to use the Sharepoint install CD that includes SP2 in order for installation to succeed. Where can we download Sharepoint Foundation 2010 SP2 slipstream install imag
-
Random application behaviour for different user IDs
Hi all, We are testing the standard bank application in ESS. We have made some minor field name and help link modifications in the application through NWDS. However, the application behaviour is unpredictable. For example, when I log in as user A, i
-
Tips for making master pages??
Hello, I am making a master page that will contain jpeg images, and I am having trouble getting them to "snap to" the guides". Before, in CS3, I remember when I moved an image close to a guide, it would automatically "snap to" it, but for some reason
-
Trouble forrwarding photoes with E mails sent to me via an E mail
I cannot forward photoes from E mails sent to me, only the text seems to get through to E mail reciepent. == This happened == Every time Firefox opened == firefox was up dated
-
Hi, Can any one help me out with the Double Byte character isuue. The Japaneses Characters are getting printed over lapped inportal screens. Regards. Bharath Mohan N