Cannot move folder because of error code -43

I am trying to move a Folder into my Applications/Utilities folder. When I move into any folder like Applications or Documents it moves fine. But when I try to move it into Utilities it asks me to authenticate and then I get this error:
The operation cannot be completed because one or more required items cannot be found. (Error code = -43).
Anyone know why this is happening?
Thanks,
Frank

It turns out what was going on was the folder I was moving is a shortcut. And where I was trying to move it already had a shortcut of the same name So Mac OS X gave me that informative error to tell me about the conflict.
Nice.

Similar Messages

  • Windows 7 Backup "The System cannot find the path specified" - Error Code 0x80070003

    I'm having severe problems backing up my own machine to a share on our
    FILE-SERVER as \\FILE-SERVER\Backup\
    I have already backed up another PC successfully using exactly the same settings I have used on my own PC. So I presume it is nothing to do with the
    FILE-SERVER or the Backup settings.  It has to be something to do with what I'm trying to backup from my machine.
    First some background.
     This exercise all began when the Windows Server 2008 r2
    O/S fell over on one of our Servers. I tried reinstalling the O/S several times, without success. In the end I grabbed another drive and re-built the O/S. I then had problems promoting it to a Domain Controller on the network.
     In the end I renamed the Server from FILESERVER
    to FILE-SERVER.
    We routinely share four folders on what is now
    FILE-SERVER:
    \\FILE-SERVER\Backup
    - a Folder where backups from all other machines are written, so that they will be backed up with the Server
    \\FILE-SERVER\Company
    - holds all our Company data
    \\FILE-SERVER\GEM
    - this is the application folder for our own database
    \\FILE-SERVER\Install
    - holds all Install files for the software we use
    These are all held on a RAID 1 Array that is separate from the System Disk that fell over.
    Prior to the Server falling over, I had Backup working fine on my machine. 
    On my Notebook PC I had made these shared folders 'Available Offline', so that I still had everything available to me when I was out of the office. They were
    of course shared as \\FILESERVER\... not \\FILE-SERVER\...
    Having got the Server up and going again, I began to get the Backups from the Windows 7 Client PC's going again.
     I started with a Desktop, which of course did not have any Offline Files.
     That proved relatively straight-forward.
    I then started with my machine. Initially I did not make the above shared folders 'Available Offline'. I set up my Backup using exactly the same settings that
    had worked OK on the desktop machine. But when I ran the backup I got:
    The System cannot find the path specified, Error Code 0x80070003
    I tried all sorts of things to get it to work:
    I restored the system to the earliest point possible,
    I ran chkdsk,
    I defragged the drive
    All to no avail, so I tried backing up:
    with and without a system image,
    reducing the backup to a single folder, 
    a single Folder with only one .txt file in it, 
    making the Folders 'Available Offline' again.
    Nothing made any difference.
     In the end I looked in the Sync Center to look at the Offline Files Folder.
     Under Mapped Network Drives I discovered I still had the Files and Folders from
    \\FILESERVER.  In their Shortcut Menu 'Always Available Offline' was greyed out. So I deleted the Offline Copies. This deleted the Files in the Folders but not the Folders.
    Since I could find no way of deleting the old Mapped Network Drives, I decided I'd painted myself into a corner by renaming the Server.
     So I bit the bullet and re-installed my Notebook too.  This did get rid of the unwanted old Mapped Network Drives - BUT NOT THE ERROR!!
    I’ve been through all the troubleshooting procedures in: 
    http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
    Method 1
    It had none of the symptoms reported in  
    http://support.microsoft.com/kb/973455 
    but I scanned for ‘reparse’ points anyway.  Found several “Junction Points” but none that were “Mounted Volumes”, just ordinary ‘File Folders’.
    Method 2
    Check a drive for errors. 
    Looked at: 
    http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors
    Checked
    both boxes.  I closed machine down, to check for errors when it re-started. 
    It didn’t seem to find anything. 
    I say seem, because I did not actually see it finishing checking the empty space, but stages 1-4 found no problems and Windows 7 restarted normally. 
    It did detect 66 ‘Reparse’ Points, which is more than it found when I scanned for them earlier. 
    Method 3
    Yes, I am an administrator or my own machine and, as such, I have ‘Full Access’.
    I downloaded an ran the Process Monitor, filtering for Process Name “Wbengine.exe”, but did dot get a single event. 
    So I’m not sure what’s going on.
    HELP - I'm out of ideas!
    I have a WORD Document that documents all the Settings I've used on both the Server and the Clients, together with the reasoning behind those settings, but
    I cannot find a way of uploading it.

    I am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
    of the solutions listed on the Microsoft websites and answers deal with
    "Restore" functions, not the
    "Backup" itself. I have 3 folders being skipped during the backup.
    So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
    but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
    The 3 backup problems are:
    Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
    Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
    Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
    Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
    Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
    some recent Windows update.  Thanks.

  • The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed

    Friends,
                I'm facing below issue while accessing a crystal report. I heard it might be an access issue. But i'm able to access a report within a same folder.
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException : The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    Any suggestions would be very helpful.
    Thanks in Advance,
    Bharath

    Apply trace on RAS and look for errors in the RAS logs at the same timestamp.
    These errors come for various errors and tracing RAS would give us a better idea.
    It might hapen that you observe these errors for reports which takes more than the RAS timeout to export the reports.
    Post getting the RAS logs you can try below steps if we see timeout errors in RAS logs.
    Copy clientSDKOptions.xml file from <BO install path>\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\java\lib to the machine where your app is running Open clientSDKOptions.xml and change CORBARequestTimeOut from 600000 to a value large enough to allow the report to render, for instance 1200000. Default value is 600000 (10 minutes)
    Specify the location of the clientSDKOptions.xml file at run-time. In your JSP or Java files, use the Java method setProperty from the System class. Set the system property indicated by the ras.config key to the specified directory as: system.setProperty("ras.config","c:\temp"). This function call specifies that the clientSDKOptions.xml file in c:\temp is to be used for locating RAS servers.
    Thanks,
    Prithvi

  • I uninstalled and reinstalled but at the end of installation there were erros.  See attached screen shot.  I now cannot open the application.  error code 10810 comes up when I try to open.

    I could not update photoshop CS6 and Jeff from forum advised unistalling and reinstalling (Tk93580659). Mac OSX. In real trouble, as suggested I uninstalled and reinstalled but at the end of installation there were errors.  See attached screen shot.  Now I cannot open the application.  Error code 10810 comes up when I try to open (see 2nd screenshot).  Please help.  I have now lost photoshop altogether whereas previous at least I still could use it but could not update.  Thank you for any help to instal successfully.  Dr Koh

    Still looking for a solution to specific installation errors (see screeshot) referring to "Language Pack installation failure":
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050: - Adobe Photoshop CS6 Core: Failed due to Language Pack installation failure
    ERROR: DW050: - Adobe Photoshop CS6 International English Language Pack_AdobePhotoshop13-en_GB: Install failed
    Unfortunately previous advice of using CCS cleaner tool, and suggestions from links for 1) "exit code 6 and 7" and 2) "Troubleshoot instal logs" did not work at all. So I am desparate to fix this because I have spent a lot of money purchasing Photoshop CS6 but have no functioning program. Surely Adobe can help solve this problem with installing, or else it means a lot of money spent on Photoshop CS6 for nothing. I am appealing directly to Adobe to help because I have come to the end of my options. I thank the forum for their suggestions but so far the solution for this specific "Language Pack installation failure" problem is missing. Thank you.
    Dr Koh

  • Intermittent "Cannot move Mail to mailbox" Errors.

    Has anyone else experienced intermittent "Cannot move Mail to mailbox" error messages?
    I've done everything I can think of to track this problem down: packet sniffing, reviewing the IIS logs, looking at the event viewer to see if anything is dieing around the time of the request, switching from AT&T Edge (3G isn't reliable here) to WI-FI and back again, etc.
    I have noticed while packet sniffing that when the error occurs there is a [RST, ACK] returned instead of [FIN, ACK].
    This is an intermittent problem that has been plaguing us for a few weeks now.
    Our setup includes: windows server 2008, IIS 7, and exchange 2007 with all patches and roll-ups applied.
    Thanks in advance, and any advice is appreciated.

    What argues FOR a server problem is that millions of users don't have the problem. I see it occasionally when the cell signal is very weak.
    I had a problem a couple of months ago where the push stopped working. My SA looked at it and fixed it. This is not the same problem you have, but it could be related. Here is his explanation:
    +We ran windows updates on Promail a weekend or so before this problem on the 28th. One of the updates was a DNS fix that expanded the dynamic port range dns is using. Problem was, in it’s infinite wisdom, MS allowed this range change to include 2883, the AUTD or active sync port. So we had to do a registry change to exclude the port for Active sync only. Here’s the KB article:+
    +http://support.microsoft.com/kb/956189+
    +Jason said that he recalled making this change before. But the updates on the weekend, must have reverted the registry change he did because the exception wasn’t there anymore.+

  • Error Getting while opening an adobe attachment "Output cannot be displayed because an error occured "

    Hello Experts,
    In our project where CRM Web ui is UI technology used, i am displaying list of attachments in one block.
    WHen i am clicking on these adobe form outputs which are in the form of links, i am getting an error "Output cannot be displayed because an error occured".
    Can anyone please tell me what is missing which is leading to this error ?
    Thanks and Best Regards,
    Nikhil Kulkarni

    Generally this kind of error messages occur when there is a gap b/w the PDF rendering and the layout ..
    The only way to find out the error is debugging, where you have caught the exception from the driver program.
    Naveen

  • Photoshop Camera Raw 7.4 Update  is not installing because of Error Code U43M1D207. What needs to be done to resolve this error code issue?

    Photoshop Camera Raw 7.4 update is not installing because of error code U43M1D207.  What needs to be done to resolve this issue?

    If you need to post again, please keept the following in mind:
    BOILERPLATE TEXT:
    Note that because this is boilerplate text, not all points may apply to any given, specific poster.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • I am using elements 11. I cannot open editor because configuration error occurs with message "errror 213:11". What happened? What can I do? Thanks a lot for your support.

    I am using elements 11 with Windows7. I cannot open editor because configuration error occurs with message "errror 213:11". What happened? What can I do? Thanks a lot for your support.

    See if this helps:
    Error "License store does not allow writing" | Install log | CS5, CS5.5

  • Itunes cannot backup iphone because an error occurred

    itunes cannot backup iphone because an error occurred

    Start computer iTunes, in iTunes > Preferences... (Windows: Edit > Preferences...) > Devices > delete your iPhone backup and try again.

  • Itunes error message "file name here cannot be copied because an error occured. There is not enough memory available."

    Hello,
    I have an iPad 64gb. Been trying to load files on it with plenty of memory to spare. generally though i cant load more than about 35mb at a time before the message "file name here cannot be copied because an error occured. There is not enough memory available." pops up. I keep needing to close itunes, unplug my ipad, and restart it again. but the issue remeains the same.
    when i open up task manager i notice that memory usage by itunes goes from 95,000K to 1,750,000K in under 30sec which is when i get the error message. any solutions? currently running itunes on Vista.
    Thanks in advance.

    trash stuff form your computers hard drive to free up space.

  • I cannot download the new update - Error code: 43

    I cannot download the new update - Error code: 43 -- what does that mean?

    Hi Arjun,
    From the cc app the preferences option is greyed-out, so I'm not able to sign out and in... yes I'm aware I'm able to update from the app directly.  The issue I found in the past is when I updated Lightroom from Lightroom itself, the cc app did not see it as being updated... still saw it as the earlier version.  So the app said there was an update and I was trying to go into cc to perform the update instead of the app....
    Would be interested in hearing more about the error 43 from Adobe...
    I'm attaching two screen shots, one of the error and the second of the greyed-out preference option.
    Thanks,
    -Erik

  • My iTunes can't update to 11.0.1 because of error code 2203

    My iTunes can't update to 11.0.1 because of error code 2203 ???

    Chris,
    Are you trying to use the auto updater? Forget it.
    Download the update manually from the Adobe site to your desktop and run it also manually from there.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4291
    Print and follow the instructions from there.
    The Adobe auto updater has been a piece of cr@p for years and years.

  • Can't empty trash because of error code -8003

    I can't empty trash which contains numerous items because of error code -8003. Any suggestions would be greatly appreciated.

    Read other postings. Downloaded Trash It. Problem solved. EC

  • HT4623 I am confused.  I cannot get Gmail because  an error message says the password or id id wrong.  Also, I cannot find my iphone id.

    I am confused.  I cannot get Gmail because  an error message says the password or id id wrong.  Also, I cannot find my iphone id.
    <Personal Information Edited by Host>

    Friend,
    When you set a Gmail account you just need to enter your email account and password. It is impossible you enter the right information but it says "wrong". Double check it.
    If you mentioned "iPhone ID" as your Apple ID, you can find it going to Settings>> iCloud. Check if you already sign in to. If not, sign in with your Apple ID and password. If you haven't created one, you can do it there.
    Hop it will be helpful

  • SSRS 2005 report: Cannot bulk load Operating system error code 5(Access is denied.)

    I built a SSRS 2005 report, which calls a stored proc on SQL Server 2005. The proc contains following code:
    CREATE TABLE #promo (promo VARCHAR(1000))
    BULK
    INSERT #promo
    FROM '\\aseposretail\c$\nz\promo_names.txt'
    WITH
    --FIELDTERMINATOR = '',
    ROWTERMINATOR = '\n'
    SELECT * from #promo
    It's ok when I manually execute the proc in SSMS.
    When I try to run the report from BIDS I got following error:
    *Cannot bulk load because the file "\aseposretail\c$\nz\promo_names.txt" could not be opened. Operating system error code 5(Access is denied.).*
    Note: I have gooled a bit and see many questions on this but they are not relevant because I CAN run the code no problem in SSMS. It's the SSRS having the issue. I know little about the security of SSRS.

    I'm having the same type of issue.  I can bulk load the same file into the same table on the same server using the same login on one workstation, but not on another.  I get this error:
    Msg 4861, Level 16, State 1, Line 1
    Cannot bulk load because the file "\\xxx\abc.txt" could not be opened. Operating system error code 5(Access is denied.).
    I've checked SQL client versions and they are the same, I've also set the client connection to TCP/IP only in the SQL Server Configuration Manager.  Still this one workstation is getting the error.  Since the same login is being used on both workstations and it works on one  but not the other, the issue is not a permissions issue.  I can also have another user login into the bad workstation and have the bulk load fail, but when they log into their regular workstation it works fine.  Any ideas on what the client configuration issue is?  These are the version numbers for Management Studio:
    Microsoft SQL Server Management Studio 9.00.3042.00
    Microsoft Analysis Services Client Tools 2005.090.3042.00
    Microsoft Data Access Components (MDAC) 2000.085.1132.00 (xpsp.080413-0852)
    Microsoft MSXML 2.6 3.0 5.0 6.0
    Microsoft Internet Explorer 6.0.2900.5512
    Microsoft .NET Framework 2.0.50727.1433
    Operating System 5.1.2600
    Thanks,
    MWise

Maybe you are looking for