Cannot open converted Word file to edit????

Once I've downloaded my pdf to Word converted document, how do I open it in Word to edit it? That's the whole point of this Adobe converter that I just purchased.
Going Mad with Frustration in hawaii

there no any problems when I used the last version
The last version of what?

Similar Messages

Convert Word File into Editable PDFIhavebee

I have been sent a Word file which is an application form... I have to add editable fields to the form is there any easy way to do this from Word? The form is 10 pages and has many many fields so could take forever and was hoping there was a slightly easy way...

There is no way to add form fields in Word and have them transfer over to a PDF if that's what you mean.
You would need to convert to PDF then use the form tools in Acrobat.

Cannot open PowerPoint, Word files

Hello,
When I try to open PowerPoint or Word files, I get a message:
Import Error
The resource "ADWPDefaultLayoutStyleDictionary.xml" couldn't be loaded.
I reinstalled iWork, but it didn't help. Just in case I used the Disk Tool (or however it's called in English) and repaired permissions/authorizations. Still no result.
I know this question has been asked and answered before: (https://discussions.apple.com/message/15064918, https://discussions.apple.com/message/12424085?messageID=12424085), but as I mentioned in my case reinstallation didn't work.
Please help.

Did you try this?:
"Open a file the way you just described, in the upper left corner does appear "Excel" near the black apple? If yes, go to the menu Window --> Zoom Windows (twice if necessary)
Did the window of the file appeared?"

Cannot open some word file

I can't not open some of my exist files using microsoft word 2011 ( most of files still can be opened) after I installed Yosemite. However I can open this files with Preview, but I need to edit them. No problem to create the new file. Any ways to solve this problem?

there no any problems when I used the last version
The last version of what?

Cannot open converted DNG files from Canon 6D in PSE11 [was: Canon files]

Why cant I open CR2 files in PSE 11?

What does it show when you go to:
Help >> About Plug In >> Camera Raw
My copy of PSE11 shows this:
The alternative is to upgrade your DNG converter to 8.1 by going to this link:
Adobe DNG Converter for Mac OS
Adobe DNG Converter for Windows
Also you may want to view this video which has become a sensation on the web:
<http://www.youtube.com/watch?v=0bqGovpuihw>

Mac Word 2008 - hyperlink message "Word cannot open the specified file"

I'm using WordMac 2008 version 12.2.5 and after following detailed instructions on how to hyperlink chapters in a Table of Contents to their respective chapters in a book, I can only get the message "Word cannot open the specified file".
Any ideas what could be wrong?
My OSX is 10.5.1.
The instructions I followed are pasted below and are copied from the Smashwords Style Guide: http://www.smashwords.com/books/view/52
START OF PASTE FROM SMASHWORDS STYLE GUIDE:
How to create a linked Table of Contents. Consider this feature in “beta.” My
thanks to Smashwords author Cheryl Anne Gardner for sharing these tips below,
which I have augmented based on my own experience adding a ToC to the Style
Guide (woo hoo!).
By adding a linked table of contents, you can help readers navigate your
document. This is especially useful for non-fiction. Most fiction doesn’t
need it. If you follow the instructions below, the ToC should work in your
EPUB, MOBI and PDF files, but it will not work in our other formats.
First, create your table of contents where you want it by typing it out. Make
sure the text is normalized just like the rest of your Smashwords’ Word
document. Example:
Contents
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Etc.
Next, we are going to create the BookMarks. In Word 2000, 2003 and 2007, the
Booksmark function is under the Insert tab. Go through your document, and at
each Chapter Start or Indexed item, you will highlight it and then select
Insert: bookmark. Name your bookmark corresponding to the Chapter/Indexed
item and then click add. It’s very important to use the first word of your
heading you’re linking to, because later on, when you add the hyperlinks,
Word displays the bookmark shortcuts in alphabetical order. With many
bookmarks, I found many of my bookmarks weren’t labeled properly, so it was
tough to link to the correct bookmark. If you want to link to a chapter named
How to Publish Ebooks, I’d recommend naming your bookmark
“HowToPublishEbooks” to make it easy to locate. If you instead name it,
“publishebooks,” you’ll frazzle your brain and make mistakes.
Repeat the process above for every Chapter Start as well as for other matter
in the book like index, bibliography, epilogue, prologue, etc. I didn’t link
to every section in the Style Guide, because otherwise the ToC would have
been three pages long. This is your call.
Next, return to your table of contents and highlight the word “Contents.”
Click insert, bookmark, and label this last bookmark “Contents”. Formatting
note: Bookmarks cannot have spaces or odd characters. If instead of
“Contents” you called the label in the document Table of Contents, as I did,
then when you insert the bookmark, name the bookmark “TableofContents,” one
word, or “toc.”
Next, add the hyperlinks to your Chapter Starts. In your table of contents,
if Chapter 1 is called Chapter 1, then highlight Chapter 1 and then click
insert Hyperlink. As you can see in the Style Guide, I tried to use more
descriptive labels. In Word’s Hyperlink menu on the left hand side, select
“Place in this document.” You will now see your bookmarks listed in the main
window. Select Chapter1 bookmark (or whatever you labeled it) and then click
ok. Do this procedure for every chapter and piece of matter in the table of
contents.
Final step. Now you can link back to the Table of contents. Move through your
document to each indexed item or Chapter start and highlight it. Then click
insert, hyperlink, and then select “Place in this document.” When the
bookmarks are showing in the main window, select the bookmark labeled
“Contents,” assuming that’s what you named your Table of Contents. Do this
for each and every chapter and or indexed item.
After you are done, all your links will be underlined. You will need to test
and make sure you linked everything properly. In most Word versions, you just
click on the hyperlink to test. In Word 2007, you may need to Ctrl-Click each
hyperlink and make sure it takes you where you need to go in the document.
Advice: Word has an automatic ToC generation feature under the reference tab.
Do not use this. It uses automated headings and formatting to generate the
ToC and this will un-normalize your text and cause font conversion issues in
your Smashwords files.
END OF PASTE FROM SMASHWORDS STYLE GUIDE.
I did all that as described but I still get the message "Word cannot open the specified file".
Could you help please?

This question would be better addressed to...
http://www.microsoft.com/mac/help.mspx
I think the operative phrase from that article is...
*Consider this feature in “beta.”*
-mj

How do i convert pdf file in editable word document

How do i convert pdf file in editable word document ?

To convert a PDF file to Word or Excel, you can subscribe to one of Adobe's services (Adobe ExportPDF or Adobe PDF Pack) or you can purchase Adobe Acrobat.

My converted word file is not editable...

My converted word file is not editable...

Hi Haixia, frank7882 and going mad,
Welcome! Would the three of you mind giving me the specifics of the issues you are experiencing?
What type of PDF's are you converting to word? Are you receiving a specific error message? Have you tried rebooting your computers and logging into ExportPDF again?
I'd really like to assist!
Kind regards, Stacy
P.S. This 'Getting Started in ExportPDF' guide may come handy sometime as well.

Hi I have just tried to convert a pdf through Adobe Export PDF, it appears to process it, but when I open the word file it just has the lines on it, and no words.

hi I have just tried to convert a pdf through Adobe Export PDF, it appears to process it, but when I open the word file it just has the lines on it, and no words.

Hi nickel13,
What is the problem you are facing?
Is this happening with a single PDF file?
Regards,
Florence

IMAQ Create for compressed .avi - cannot open the new file afterwards with IMAQ Open

Hi there,
i hope i'm in the right board.
I recently tried to compress avi-files i collected from various cameras throughout the last years.
At first i used VDub and ffdshow with a FFVH codec - it worked fine as long as i won't try to open the compressed avi using IMAQ Open.
I googled a bit and read a lot in these forums, tried several solutions - none of them worked.
So i gave it a last, let's call it fail-proof, try:
I took the original .avi (uncompressed, openable with IMAQ Open) and used my newly gained knowledge to use LV for the compression work, i chose from IMAQ AVI Get Filter Names the ffdshow Video Codec and built a small read-write for-loop to convert the AVI frame for frame.
All worked fine despite the problem, that i still cannot open the compressed file in IMAQ Open - and i do not know why.
I would be glad to force labview to decode and open the compressed file with a certain codec, but i found no option for this.
Thanks in advance
Markus
P.S.
I'm using LabView 2010 and VAS of 02/2014.

Hello Markus,
have you had a look at this:
Writing a Compressed AVI File with the IMAQ Vision Acquisition Software
Compressing avi files-Discussion Forums
Regards,
eletra

Error 0(Native: listNetInterfaces:[3]) and error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AM

a step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed.

[SOLVED] "cannot open shared object file" but library is installed

I'm trying to run a digital logic simulation tool called "atanua" but I'm getting a missing library error:
$ atanua
/opt/atanua101120/atanua: error while loading shared libraries: libSDL_image-1.2.so.0: cannot open shared object file: No such file or directory
I tried re-installing both atanua (from AUR) and sdl_image (from repos) but the error remains.
$ ldd /opt/atanua101120/atanua | grep sdl_image
libSDL_image-1.2.so.0 => not found
I can find the "missing" library though:
$ locate libsdl_image
/usr/lib/libSDL_image-1.2.so.0
/usr/lib/libSDL_image-1.2.so.0.8.2
/usr/lib/libSDL_image.a
/usr/lib/libSDL_image.so
And so can the loader:
$ ldconfig -v | grep sdl_image
libSDL_image-1.2.so.0 -> libSDL_image.so
My initial thought is that the problem is a name mismatch between the program and the system, but I don't know the proper way to fix this. Does anyone know what I should try next?
Here's my system specs:
$ uname -a
Linux 3.0-ARCH #1 SMP PREEMPT Wed Oct 19 10:27:51 CEST 2011 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ AuthenticAMD GNU/Linux
Thanks for your help.
Last edited by spence (2011-10-30 20:22:07)

You're right. Some how [multilib] got disabled in my pacman.conf so I didn't spot a 32-bit version of the library. I uncommented the [multilib] lines, searched again, and found it. Problem solved. Thank you.

Cannot open a JSf file in jdev with WYSWYG

HI,
I startup Jdeveloper 11g studio edition version 11.1.2.3.0 with all features option selected. but I cannot open a *.Jspx file in jdev with WYSWYG showing.
anyone can give help?

Hi,experts,
In jdev 11.1.2.3,
I come up with this problem again:
In order to improve performance for jdev, i open the Manage Features for Studio Developer(ALL Features) Role, and deselect some features:
-Database Modeling
-EJB Modeling
-Team Productivity Center
-Version Control
-Web Services
-ADF Mobile Browser
Then after restart jdev,
Jsf pages cannot see in WYSIWYG mode in Designer viewer.
only see a component-structured tree but in text style in jdev in designer view
Even I reinstall jdev, the problem remains.
Can anyone give any help?
Thanks.
Edited by: BAO.SZ on 2013-5-11 上午9:40

How do I open a Word file which was exported fron PDF?

how do I open a Word file which was exported from a PDF file?

Hi alansandy,
You can find your converted Word file stored in your Acrobat.com account at https://cloud.acrobat.com. You can download your file from your account by selecting it and clicking the Download icon. Then, you can open it right up in Word!
Best,
Sara

I downloaded Redear to see if it could open an old .pdf file. Now I cannot open any .pdf files.

What is wrong with Reader? Having loaded it I now cannot open any .pdf file in my computer or on email.

Wallabykangaroo wrote:
I gave up loading then scouring out Adobe products each time it told me Flash Player was loaded but was nowhere to be found on my system. I have now done what I expect is the intention in that I have downloaded the full Adobe trial pack, which they then expect me to purchase.
Cannot get over the impression that the fault is deliberate. Building in the requirement for all users then loading a weak link, that drives you to purchase.
Shockwave is FREE... Flash Player is FREE.... Adobe Reader is FREE... Adobe AIR is FREE... Those four products are, and always have been, FREE... Flash Professional, which is for creating and editing Flash animation and video files, is a paid licensed product. Acrobat Professional, which is for creating and editing PDFs, is a paid licensed product. Neither Flash Player nor Adobe Reader have any links to prompt an upgrade to the professional version of software for the file format. Never have. Viewing Flash content and PDFs needs to be universally available to the public who receive such content over the Internet. Creating and editing Flash files and PDFs is not something that everyone needs, so it's only available at a cost for those who need it and choose to use Flash Pro or Acrobat.
There are Creative suites with several Adobe applications for everything from photo and graphic editing, to video editing, to making e-readers, to web design, but those are for developers of the individual media.

Cannot open converted Word file to edit????

Similar Messages

Maybe you are looking for