Cannot override codebase to use local files for first time installation.

I have an application that is installed via a JNLP link. The application is about 200MB and we use a web start so that each time the application starts it checks for updates in the configuration and downloads them if necessary.
I have a requirement to provide an offline installation on CD as some of our users have very slow connection speeds and it's taking over an hour to download the binaries.
I am trying to do the install using the command line javaws -import -codebase <linktolocaldir> <linktojnlp>
I need to use the jnlp on the sever so that the configuration files are checked and downloaded each time it starts.
However the local codebase is never used - the dialog always says that it is downloading from the server, I can only get it to install from the local drive if I change the path directly in the JNLP (which is no good as I need to keep this path pointing to the server)
Is there any other way to override the codebase for the initial installation?
Any help much appreciated.

Here are the guides I've used to do mine:
How to use the Java Web Start CD-Install feature ? http://download.oracle.com/javase/1.5.0/docs/guide/javaws/developersguide/cdinstall.03.06.html
Distributing a Java Web Start Application via CD-ROM http://blogs.oracle.com/CoreJavaTechTips/entry/distributing_a_java_web_start
Distributing a Java Web Start Application via CD-ROM (same as above) http://www.java.net/pub/a/today/2008/07/10/distributing-web-start-via-cd-rom.html

Similar Messages

Using Apple TV for first time - to rent a movie. Logged in successfully - billing info updated. Keep getting message to log into Itunes on PC - movie won't load on TV

using Apple TV for first time - to rent a movie. Logged in successfully - billing info updated. Keep getting message to log into Itunes on PC - movie won't load on TV -
any advice?

3GB for a movie? That's almost equivalent to an original DVD.
Have you checked in the Recently Added playlist?
I think this is possibly linear. Select 'normal' in HB, iTunes accepts it; select 'high quality' in HB iTunes doesn't. I can't say why; I don't have any video that anywhere approaches 3GB in size. If that's how iTunes behaves I don't see you have too many options. You either select normal and it works, or you select HQ and live with playing the movie outside of iTunes.
I won't ask what movie because any help with illegally ripped copy protected DVDs is strictly prohibited by the Terms of Use so I'm assuming this is a 6 hour video of your puppy playing on the floor.

Using wall charger for first time I get error message "charging not supported by this accessory." Been using since December and not seen this before.

Using wall charger and am now getting error message "charging not supported by this accessory." Have been using since December and this is first time I have encountered this.

Did you look to see if there is debris or dust causing the problem? Get a flashlight and take a look to make sure.
Is there something in the USB end of the cord perhaps?
You didn't answer this question ....Are you using the charger and cord that came with your iPad?
You could try changing cords if you have another one available to see if it is the cord. Have you tried connecting to your computer to see if you get the same message?
You could try a hard reset by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears, let go of the buttons and let the iPad restart. Then try the charger again.

Just used iMovie HD for first time on mac pro

ugh! locked up first time loading. very sluggish camera controls. will research this on the iMovie forum as well, but has anyone experienced this here? almost as if it were not universal.

I have been using it with no problem. Maybe it is related to the camera you are using as opposed to the program itself. I have a Canon Optura.

New P-book: OK to use while charging for first time?

Hi All,
I'm getting my Powerbook today. Can I plug it in and set it all up while it's charging, or SHOULD I wait until it's fully charged? Thanks in advance for anyone's help.
-Mike

No, this will not do any damage. The thing you should do though is after that first charge is complete, go ahead and drain down to zero percent, so that it will be calibrated.
People who leave the battery charged in all the time while using the computer, do not have the battery go bad because they are using it plugged in. The reason it goes bad in that situation is because they aren't keeping the juices flowing in the battery! They don't take it off the A/C, the chemicals don't keep moving, so that shortens the life. That is why you should use a portable, not connected to A/C at least one or two times per week to at least 70 percent (use 25 to 30 percent of battery) or so.
However, the actual using of the machine while connected to A/c is no problem. Just be sure to regularly use it via battery too, to keep the chemicals moving.

Using my hotspot for first time and when configuring devise it asked for MAC address

I dont have a MAC. I want to use this on a Mini laptop. I am adding my first device. I live in the country and dont think any one elses computer will hook to this hotspot. . I am leaving on vacation tomorrow and need for this too work.

Personally, I use the MAC filter. Go into network on your mini and you can find that devices MAC address.
MAC address has nothing to do with Apple.

Slight Color and Quality Shift when viewing RAW files for first time in Library Module.

Hello,
I have been shooting RAW for a while and have notice that after I import the images and then start to view them in the Library Module I will see a slight color and quality shift - almost looks like a white balance shift but not quite.   I was thinking that perhaps there was some automatic preset being applied but I don't have any presets at all.
I am shooting with a Canon 1DX as well as 7D. I have not checked to see if I get this situation with the 7D, but I know for sure that I get it with the 1DX.
Today I was reviewing some images in Bridge and decided to open one of them in Camera RAW.   At that time I discovered that the camera's Image Style Settings were available, Faithful, Standard, Portrait, etc. I noticed that the images did not have one of the camera styles applied to them but rather the Adobe Standard Style. At that point from within RAW I selected one of the camera's styles and bingo thats the kind of shift I am seeing when I first view an image in LR4 Library.
So as far as I can tell the RAW images are getting the Adobe Standard style applied in LR.   I have no idea if this is a default behavior of if I have done something to cause it. I'm also thinking that perhaps LR does not necessarily apply the Camera's Styles automatically even though the particular style has been set in the camera -- perhaps is not imported as part of the metadata during the import and thus defaults to the Adobe Standard.
I guess what I need to know is a few things and I hope someone can educate this newbie!
1. Should I expect LR4 to apply the Style as set from the camera automatically or not at all?
2. Can I prevent LR from applying the Adobe Standard Style and apply no style?
3. Can I cause LR to apply the Style as set in the camera for the particular image to be appied automatically upon import?
Thank you for any guidenace you can offer. Of course if you need additional information or clarification please let me know.
Scott

That sort of describes it and may be exactly what is happening. I have a shoot tonight and will pay closer attention to the process and behavior when I import.
It is the full image that I see the shift on though. Its not that the thumbnail and the full size image look different. It the full size image looking one way and then shifting in front of my eyes.
What is frustrating is that I typically find that the image before the shift is better than what appears after the shift, so I find myself always chasing to get back to where it was and because its gone I'm chasing an invisible ideal, so to speak.   Ahhh...isnt that the life of a photographer though!
It seems like its the last step in the render process -- if I could just figure out what it is and stop it I could finally figure out if I really care or not. Its just so quick its tough to tell if indeed the first appearance is better.
I'll feedback some more information when I get a better handle on this.
Thanks for the reference.

HT4108 Using av adapter for first time..

I have bought a av adapter for my iPad 2 but when I tried to connect it it keeps on coming up accessory not supported..can anyone tell me what to do.?

What do you mean they do not play on your Shuffle? You may need to change playlists in order to hear your podcasts. See page 25 of your iPod's User Guide for more information.
http://manuals.info.apple.com/en_US/iPod_shuffle_4thgen_User_Guide.pdf
B-rock

Exception using ATG CSC for first time after installation/configuration

Hi,
I am getting the below error when i try to hit the csc url(http://localhost:8080/agent/). I have just installed/configured ATG CSC in my machine. Any help on this is welcome.
SOURCE EXCEPTION:
javax.servlet.ServletException: Can't find component named: /atg/agent/userprofiling/AgentProfileFormHandler
at atg.droplet.DropletDescriptor.setPropertyValue(DropletDescriptor.java:708)
at atg.taglib.dspjsp.SetValueTag.doStartTag(SetValueTag.java:282)
at org.apache.jsp.accessDenied_jsp._jspx_meth_dspel_005fsetvalue_005f0(accessDenied_jsp.java:1289)
at org.apache.jsp.accessDenied_jsp._jspx_meth_dspel_005fpage_005f1(accessDenied_jsp.java:995)
at org.apache.jsp.accessDenied_jsp._jspService(accessDenied_jsp.java:299)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:387)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at atg.servlet.pipeline.TailPipelineServlet.service(TailPipelineServlet.java:148)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.DispatcherPipelineServletImpl.service(DispatcherPipelineServletImpl.java:253)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.http.CookieBufferServlet.service(CookieBufferServlet.java:97)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.ExpiredPasswordServlet.service(ExpiredPasswordServlet.java:356)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.MimeTyperPipelineServlet.service(MimeTyperPipelineServlet.java:206)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.droplet.DropletEventServlet.service(DropletEventServlet.java:606)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.sessionsaver.SessionSaverServlet.service(SessionSaverServlet.java:2425)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.AccessControlServlet.service(AccessControlServlet.java:602)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.PageEventTriggerPipelineServlet.service(PageEventTriggerPipelineServlet.java:169)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.SessionEventTrigger.service(SessionEventTrigger.java:490)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.ProfileRequestServlet.service(ProfileRequestServlet.java:436)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.DynamoPipelineServlet.service(DynamoPipelineServlet.java:469)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.URLArgumentPipelineServlet.service(URLArgumentPipelineServlet.java:280)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.PathAuthenticationPipelineServlet.service(PathAuthenticationPipelineServlet.java:370)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.sso.PassportServlet.service(PassportServlet.java:561)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.security.ThreadUserBinderServlet.service(ThreadUserBinderServlet.java:91)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.dtm.TransactionPipelineServlet.service(TransactionPipelineServlet.java:212)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.HeadPipelineServlet.passRequest(HeadPipelineServlet.java:1097)
at atg.servlet.pipeline.HeadPipelineServlet.service(HeadPipelineServlet.java:779)
at atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:250)
at atg.filter.dspjsp.PageFilter.doFilter(PageFilter.java:227)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at atg.servlet.GenericFilterService.doFilterChain(GenericFilterService.java:599)
at atg.servlet.GenericFilterService.handleDoFilter(GenericFilterService.java:462)
at atg.servlet.GenericFilterService.doFilter(GenericFilterService.java:409)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:179)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)
at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:156)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:580)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Thread.java:662)
20:41:35,752 ERROR [DynamoServlet]
javax.servlet.jsp.JspTagException: java.lang.NullPointerException
at atg.svc.taglib.stateholder.RestoreStateTag.doStartTag(RestoreStateTag.java:81)
at org.apache.jsp.error_jsp._jspx_meth_svc_002dui_005frestoreState_005f0(error_jsp.java:766)
at org.apache.jsp.error_jsp._jspService(error_jsp.java:240)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:387)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:687)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:469)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:403)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)
at org.apache.jasper.runtime.PageContextImpl.doForward(PageContextImpl.java:699)
at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:670)
at org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:811)
at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:784)
at org.apache.jsp.accessDenied_jsp._jspService(accessDenied_jsp.java:307)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:387)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at atg.servlet.pipeline.TailPipelineServlet.service(TailPipelineServlet.java:148)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.DispatcherPipelineServletImpl.service(DispatcherPipelineServletImpl.java:253)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.http.CookieBufferServlet.service(CookieBufferServlet.java:97)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.ExpiredPasswordServlet.service(ExpiredPasswordServlet.java:356)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.MimeTyperPipelineServlet.service(MimeTyperPipelineServlet.java:206)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.droplet.DropletEventServlet.service(DropletEventServlet.java:606)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.sessionsaver.SessionSaverServlet.service(SessionSaverServlet.java:2425)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.AccessControlServlet.service(AccessControlServlet.java:602)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.PageEventTriggerPipelineServlet.service(PageEventTriggerPipelineServlet.java:169)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.SessionEventTrigger.service(SessionEventTrigger.java:490)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.ProfileRequestServlet.service(ProfileRequestServlet.java:436)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.DynamoPipelineServlet.service(DynamoPipelineServlet.java:469)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.URLArgumentPipelineServlet.service(URLArgumentPipelineServlet.java:280)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.PathAuthenticationPipelineServlet.service(PathAuthenticationPipelineServlet.java:370)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.userprofiling.sso.PassportServlet.service(PassportServlet.java:561)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.security.ThreadUserBinderServlet.service(ThreadUserBinderServlet.java:91)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.dtm.TransactionPipelineServlet.service(TransactionPipelineServlet.java:212)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
at atg.servlet.pipeline.HeadPipelineServlet.passRequest(HeadPipelineServlet.java:1097)
at atg.servlet.pipeline.HeadPipelineServlet.service(HeadPipelineServlet.java:779)
at atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:250)
at atg.filter.dspjsp.PageFilter.doFilter(PageFilter.java:227)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at atg.servlet.GenericFilterService.doFilterChain(GenericFilterService.java:599)
at atg.servlet.GenericFilterService.handleDoFilter(GenericFilterService.java:462)
at atg.servlet.GenericFilterService.doFilter(GenericFilterService.java:409)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:179)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)
at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:156)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:580)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.NullPointerException
at atg.svc.taglib.stateholder.RestoreStateTag.doStartTag(RestoreStateTag.java:75)
Thanks
Edited by: 979965 on Jan 4, 2013 7:22 AM

This could be a effect of some earlier exception. Can you look through the log to see if other exceptions are thrown.
You might also want to search AgentProfileFormHandler in your log to see if an exception is thrown while initializing the component

VMWare vs. Bootcamp for first time installation...thoughts?

I've got an early 2008 MacPro 2.8ghz with 10gb of RAM. I have 300gb and 500gb internal hard drives; the 300gb drive is the OS X start-up drive.
I'm looking to install the Win 7 beta and eventually buying Win 7 when it's released so I can run a few Windows programs (like a non-crippled version of Excel, one that supports VB and macros).
Would I be better off buying VM Fusion 2.0 or going with Bootcamp. I'm primarily interested in a) stability; b) speed when running under either operating system; c) installation ease. Hot-swapping is appealing but not essential if it means significantly compromising stability or speed.
Also, can I install the Win 7 partition on the second 500gb drive to allow for a bigger dedicated Win partition. I have 100gb left on the Mac OS drive, and using it for Win 7 would probably leave me with a too-small Win partition while simultaneously limiting my OS X space.

Thanks much, but can I get one clarification? When you say "pull" my OS X drive, I'm not sure I'm following you. Don't I need to run Bootcamp from my OS X drive to begin the Win 7 installation?
I've never tried installing Win on a Mac (6-yr Mac user, 25-yr PC/Win user). I'm guessing your saying I should physically pull the OS X drive to take it out of play, then boot from the Win install disk and choose the remaining drive?

I got a new computer, and now i cannot access the local files for my website (Dreamweaver)...help?

I got a new computer, and now i cannot access the local files for my website (Dreamweaver)...
the new computer is a Mac.
I see the site on my computer files, but it will not connect with Dreamweaver on this new computer.
can anyone help with this?
thanks,
Margaret

no special characters...
see if this gives you any info...

How can i make hyperlink to local file for dowloading

How can I make hyperlink to a local file for downloading it, it seams that only www links work in web Ui.
Thanks

If we assume that you have a LabVIEW application running on your cRIO that is exposing some data through web services, there are a couple of possibilities.
You can create a web service call that returns the log data. In order for the browser to treat this as a file, you must set the correct content type in the http header. To do this you can't use the default form of data output. Instead you must create an "httpRequestID" input to your web service VI. With this you can call "Write Response.vi" to give the log data and "Set HTTP Header.vi" to specify the type (text/text probably works for a log). You can look at "examples\comm\webservices\address book\FindContacts.vi" to see an example of calling these 2 VIs. Once you create that web service entry point, you can set that as the URL of the hyperlink control and it should work.
Another option is to have the cRIO application write to a log file that is under the root of the web server running on the machine. (This is the same place the xap for your Web UI Builder application is put.) This file could then be served up through the web server just like any other file.
With either of these solutions there may be concerns about the browser caching results rather than requesting new content each time. There are additional values that can be set in the http headers with the first solution that can help with this, but I think there is still some variation between browsers.

ALV issue: when save list using Local File command will get run time error!

help!!!!
report list using ALV method when to save this list using Local File.
i will get GETWA_NOT_ASSIGNED run time error information.
how resolve it?
source code :
REPORT   ZIFT0103.
TABLES : MARA,MARC,CDHDR,CDPOS,MAKT.
******DEVK909212****************
****利用工厂来区分不同的SERVER的FTP ADDRESS ,user ,PASSWORD
DATA: FTP_WERKS LIKE MARC-WERKS.
********定义一个RANGE用来抓取MARC的信息
RANGES:R_MATNR FOR MARA-MATNR OCCURS 0.
********定义一个INTERNAL TABLE 来抓取MARC 的信息
DATA:BEGIN OF IT_MARC OCCURS 0,
      MATNR LIKE MARC-MATNR,
      WERKS LIKE MARC-WERKS,
      USERNAME TYPE CDHDR-USERNAME,
     UDATE    TYPE CDHDR-UDATE,
     FLAG_UI TYPE C,
     END OF IT_MARC.
*******定义存放北京的数据的变量
DATA : BEGIN OF FTP_BEIJING OCCURS 0 ,
              MATNR(25) ,
              MATNR1(25) ,
              MAKTX(30) ,
       END OF FTP_BEIJING .
******定义福清的数据变量
DATA : BEGIN OF FTP_FUQING OCCURS 0 ,
              MATNR(25) ,
              MATNR1(25) ,
              MAKTX(30) ,
       END OF FTP_FUQING .
*******DEVK909212*****************
DATA : BEGIN OF FTP_ITEMDOC1 OCCURS 0 ,
              MATNR(25) ,
              MAKTX(30) ,
       END OF FTP_ITEMDOC1 .
DATA : BEGIN OF FTP_ITEMDOC OCCURS 0 ,
              MATNR(25) ,
              MATNR1(25) ,
              MAKTX(30) ,
       END OF FTP_ITEMDOC .
DATA: WA_ZMSGTA TYPE ZMSGTA ,
      l_ersda like MARA-ERSDA .
***********DEVK909553********************
****用来决定执行FTP还是显示LIST**********
DATA:g_tcode_flag.
***********DEVK909553********************
Error message process ******************************
DEFINE EXPLAIN_MSG.
   break soe_richard.
CALL FUNCTION 'BAPI_MESSAGE_GETDETAIL'
    EXPORTING
      ID                = &1   "SY-MSGID
      NUMBER            = &2   "SY-MSGNO
      LANGUAGE          = SY-LANGU
      TEXTFORMAT        = &3
      LINKPATTERN       =
      MESSAGE_V1        = &4                                "SY-MSGV1
      MESSAGE_V2        = &5                                "SY-MSGV2
      MESSAGE_V3        = &6                                "SY-MSGV3
      MESSAGE_V4        = &7                                "SY-MSGV4
    IMPORTING
      MESSAGE           = &8   "WA_ZMSGTA-MSE1
      RETURN            =
    TABLES
      TEXT              =
END-OF-DEFINITION.
DEFINE ERROR_MSG_UPDATA.
CALL FUNCTION 'ZINSERT_MSG' "IN UPDATE TASK
    EXPORTING
      XZMSGTA      = &1    "WA_ZMSGTA
    EXCEPTIONS
      UPDATE_ERROR = 1
      OTHERS       = 2.
END-OF-DEFINITION.
IF SY-TCODE = 'ZIFT103' .
g_tcode_flag = 'L'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
    EXPORTING
      PERCENTAGE = 0
      TEXT       = '请耐心等候,系统正在抓数据'.
ENDIF.
l_ersda = sy-datum - 1 . "取前一天产生的物料号码。
DATA:BEGIN OF it_change OCCURS 0,
     OBJECTID TYPE CDHDR-OBJECTID,
     USERNAME TYPE CDHDR-USERNAME,
     UDATE    TYPE CDHDR-UDATE,
     TABKEY   TYPE CDPOS-TABKEY,
     END OF it_change.
DATA:BEGIN OF it_cDhdr OCCURS 0,
     OBJECTID type CDHDR-OBJECTID,
     CHANGENR TYPE CDHDR-CHANGENR,
     USERNAME TYPE CDHDR-USERNAME,
     UDATE    TYPE CDHDR-UDATE,
     END OF it_cdhdr.
DATA:search_len TYPE I.
DATA:BEGIN of it_insert OCCURS 0,
     MATNR TYPE MARA-MATNR,
     WERKS TYPE MARC-WERKS,
     END OF it_insert.
DATA:BEGIN OF it_MAKT OCCURS 0,
     MATNR TYPE MAKT-MATNR,
     MAKTX TYPE MAKT-MAKTX,
     END OF it_makt.
DATA IT_MARA TYPE TABLE OF MARA WITH HEADER LINE.
DATA:BEGIN OF IT_OUT OCCURS 0,
     MATNR TYPE MARA-MATNR,
     WERKS TYPE MARC-WERKS,
     MTART TYPE MARA-MTART,
     MEINS TYPE MARA-MEINS,
     MATKL TYPE MARA-MATKL,
     MAKTX TYPE MAKT-MAKTX,
     PSTAT TYPE MARA-PSTAT,
     BRGEW TYPE MARA-BRGEW,
     NTGEW TYPE MARA-NTGEW,
     GEWEI TYPE MARA-GEWEI,
     FERTH TYPE MARA-FERTH,
     KZUMW TYPE MARA-KZUMW,
     ERNAM TYPE MARA-ERNAM,
     ERSDA TYPE MARA-ERSDA,
     END OF IT_OUT.
*-- DECLARE DATA FOR ALV
TYPE-POOLS: slis.
DATA : g_variant LIKE disvariant,
        g_save(1) TYPE c,
        g_exit(1) TYPE c,
        gx_variant LIKE disvariant.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE, "
      gt_events   TYPE slis_t_event,
      gt_list_top_of_page TYPE slis_t_listheader,
      gs_print TYPE slis_print_alv,
      gs_layout         TYPE slis_layout_alv .
******只能抓出系统有做更改的数据***************
******而第一次INSERT MARA的数据抓不出来********
START-OF-SELECTION.
SELECT AOBJECTID AUSERNAME AUDATE BTABKEY
INTO TABLE it_change
FROM ( CDPOS AS B INNER JOIN CDHDR AS A ON
     AOBJECTCLAS = BOBJECTCLAS AND
     AOBJECTID   = BOBJECTID   AND
     ACHANGENR   = BCHANGENR )
WHERE A~OBJECTCLAS = 'MATERIAL'
AND   A~UDATE = l_ersda
AND   B~TABNAME = 'MARC'
AND   B~CHNGIND = 'I'.
LOOP AT it_change.
   search_len = STRLEN( it_change-TABKEY ).
   search_len = search_len - 4.
   IF search_len > 0.
     IT_MARC-WERKS = it_change-TABKEY+search_len(4).
   ENDIF.
   IT_MARC-MATNR = it_change-objectid+0(18).
   IT_MARC-USERNAME = it_change-username.
   IT_MARC-UDATE    = It_change-udate.
   IT_MARC-FLAG_UI = 'U'.
   APPEND IT_MARC.
   CLEAR IT_MARC.
   CLEAR R_MATNR.
   R_MATNR-SIGN = 'I'.
   R_MATNR-OPTION = 'EQ'.
   R_MATNR-LOW = IT_MARC-MATNR.
   APPEND R_MATNR.
ENDLOOP.
****CDPOS is Cluster TABLE 所以没有办法用INNER JOIN******
SELECT OBJECTID CHANGENR USERNAME UDATE
INTO TABLE it_cdhdr
FROM CDHDR
WHERE OBJECTCLAS = 'MATERIAL'
AND   UDATE = l_ersda.
AND   TCODE = 'MM02'.
LOOP AT IT_cdhdr.
    SELECT * FROM CDPOS
    WHERE OBJECTCLAS = 'MATERIAL'
    AND   OBJECTID = IT_CDHDR-OBJECTID
    AND   CHANGENR = IT_CDHDR-CHANGENR
    AND   TABNAME   = 'MARC'
    AND   CHNGIND = 'I'.
      search_len = STRLEN( CDPOS-TABKEY ).
      search_len = search_len - 4.
      IF search_len > 0.
        IT_MARC-WERKS = CDPOS-TABKEY+search_len(4).
      ENDIF.
      IT_MARC-MATNR = IT_cdhdr-objectid+0(18).
      IT_MARC-USERNAME = IT_cdhdr-username.
      IT_MARC-UDATE    = IT_cdhdr-udate.
      IT_MARC-FLAG_UI = 'U'.
      APPEND IT_MARC.
     CLEAR IT_MARC.
      CLEAR R_MATNR.
      R_MATNR-SIGN = 'I'.
      R_MATNR-OPTION = 'EQ'.
      R_MATNR-LOW = IT_MARC-MATNR.
      APPEND R_MATNR.
      CLEAR IT_MARC.
    ENDSELECT.
ENDLOOP.
IF g_tcode_flag = 'L'.
    CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
      EXPORTING
        PERCENTAGE = 20
        TEXT       = '处理好当天CHANGE的数据'.
ENDIF.
*******抓当天做了INSERT的数据*************
*******不需要***********************
SELECT BMATNR BWERKS INTO TABLE IT_INSERT
FROM MARC AS B JOIN MARA AS A
ON   AMATNR = BMATNR
WHERE A~ERSDA = l_ersda.
LOOP AT IT_INSERT.
   IT_MARC-MATNR = IT_INSERT-MATNR.
   IT_MARC-WERKS = IT_INSERT-WERKS.
   IT_MARC-FLAG_UI = 'I'.
   APPEND IT_MARC.
   CLEAR IT_MARC.
   CLEAR R_MATNR.
   R_MATNR-SIGN = 'I'.
   R_MATNR-OPTION = 'EQ'.
   R_MATNR-LOW = IT_MARC-MATNR.
   APPEND R_MATNR.
ENDLOOP.
IF g_tcode_flag = 'L'.
   CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
       PERCENTAGE = 40
       TEXT       = '处理好当天INSERT的数据'.
ENDIF.
IF g_tcode_flag = 'L'.
    PERFORM get_MAKTX.
    PERFORM get_mara.
    CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
      EXPORTING
        PERCENTAGE = 100
        TEXT       = '处理好数据,并开始显示数据'.
    PERFORM do_data.
    PERFORM display_alv.
ELSE.
    PERFORM get_MAKTX.
    PERFORM do_ftp.
ENDIF.
*&      Form get_marktx
      text
FORM get_maktx.
SELECT MATNR MAKTX INTO TABLE IT_MAKT FROM MAKT
WHERE MATNR IN R_MATNR AND SPRAS = '1'.
ENDFORM.                    "get_marktx
*&      Form get_mara
      text
FORM get_mara.
SELECT * INTO TABLE it_mara FROM MARA
WHERE MATNR IN R_MATNR.
ENDFORM.                    "get_mara
*&      Form do_data
      text
FORM do_data.
SORT IT_MARC BY MATNR WERKS.
DELETE ADJACENT DUPLICATES FROM IT_MARC COMPARING MATNR WERKS.
LOOP AT IT_MARC.
    CLEAR IT_MAKT.
    CLEAR IT_MARA.
    READ TABLE IT_MAKT WITH KEY MATNR = IT_MARC-MATNR.
    READ TABLE IT_MARA WITH KEY MATNR = IT_MARC-MATNR.
    MOVE-CORRESPONDING IT_MARA TO IT_OUT.
    IT_OUT-MAKTX = IT_MAKT-MAKTX.
    IT_OUT-WERKS = IT_MARC-WERKS.
    IF IT_MARC-FLAG_UI = 'U'.
      IT_OUT-ERNAM = IT_MARC-USERNAME.
    ENDIF.
    APPEND IT_OUT.
    CLEAR IT_OUT.
ENDLOOP.
ENDFORM.                    "do_data
*SELECT AMATNR BMAKTX INTO CORRESPONDING
*FIELDS OF FTP_ITEMDOC1 FROM MARA AS A JOIN MAKT AS B
*ON AMATNR = BMATNR WHERE A~ERSDA = l_ersda
*AND B~SPRAS = '1' . "代表为中文说明。
APPEND FTP_ITEMDOC1.
*******DEVK909212****************
*******添加RANGE*****************
CLEAR R_MATNR.
R_MATNR-SIGN = 'I'.
R_MATNR-OPTION = 'EQ'.
R_MATNR-LOW = FTP_ITEMDOC1-MATNR.
APPEND R_MATNR.
CLEAR FTP_ITEMDOC1.
*******DEVK909212****************
*ENDSELECT.
*******DEVK909212****************
****get WERKS information from MARC*******
*SELECT MATNR WERKS INTO TABLE IT_MARC
*FROM MARC
*WHERE MATNR IN R_MATNR.
*******DEVK909212****************
******DEVK909212****************
**MARK**************************
*LOOP AT FTP_ITEMDOC1 .
MOVE : FTP_ITEMDOC1-MATNR TO FTP_ITEMDOC-MATNR,
        FTP_ITEMDOC1-MATNR TO FTP_ITEMDOC-MATNR1,
        FTP_ITEMDOC1-MAKTX TO FTP_ITEMDOC-MAKTX.
APPEND FTP_ITEMDOC.
CLEAR FTP_ITEMDOC.
*ENDLOOP.
******DEVK909212****************
******DEVK909212***********************************
**根据IT_MARC中信息，往北京和福清的TABLE写数据*****
FORM do_ftp.
LOOP AT IT_MARC.
***福清的
    IF IT_MARC-WERKS = '1010' OR IT_MARC-WERKS = '1020'
       OR IT_MARC-WERKS = '1023' .
     READ TABLE FTP_ITEMDOC1 WITH KEY MATNR = IT_MARC-MATNR.
     MOVE : FTP_ITEMDOC1-MATNR TO FTP_FUQING-MATNR,
        FTP_ITEMDOC1-MATNR TO FTP_FUQING-MATNR1,
        FTP_ITEMDOC1-MAKTX TO FTP_FUQING-MAKTX.
      CLEAR IT_MAKT.
      READ TABLE IT_MAKT WITH KEY = IT_MARC-MATNR.
      MOVE : IT_MARC-MATNR TO FTP_FUQING-MATNR,
         IT_MARC-MATNR TO FTP_FUQING-MATNR1,
         IT_MAKT-MAKTX TO FTP_FUQING-MAKTX.
      APPEND FTP_FUQING.
      CLEAR FTP_FUQING.
    ENDIF.
***北京的
    IF IT_MARC-WERKS = '1041' OR IT_MARC-WERKS = '1042'.
     READ TABLE FTP_ITEMDOC1 WITH KEY MATNR = IT_MARC-MATNR.
     MOVE : FTP_ITEMDOC1-MATNR TO FTP_BEIJING-MATNR,
        FTP_ITEMDOC1-MATNR TO FTP_BEIJING-MATNR1,
        FTP_ITEMDOC1-MAKTX TO FTP_BEIJING-MAKTX.
      CLEAR IT_MAKT.
      READ TABLE IT_MAKT WITH KEY = IT_MARC-MATNR.
      MOVE : IT_MARC-MATNR TO FTP_BEIJING-MATNR,
             IT_MARC-MATNR TO FTP_BEIJING-MATNR1,
             IT_MAKT-MAKTX TO FTP_BEIJING-MAKTX.
      APPEND FTP_BEIJING.
      CLEAR FTP_BEIJING.
    ENDIF.
ENDLOOP.
****清楚重复的数据**********
SORT FTP_FUQING.
DELETE ADJACENT DUPLICATES FROM FTP_FUQING.
SORT FTP_BEIJING.
DELETE ADJACENT DUPLICATES FROM FTP_BEIJING.
***传送数据********
REFRESH FTP_ITEMDOC.
FTP_ITEMDOC[] = FTP_FUQING[].
FTP_WERKS = '1010'.
PERFORM ftp_work.
REFRESH FTP_ITEMDOC.
FTP_ITEMDOC[] = FTP_BEIJING[].
FTP_WERKS = '1041'.
PERFORM ftp_work.
******DEVK909212***********************************
ENDFORM.                    "do_ftp
*&      Form ftp_work
     把以前FTP的工作做一个FORM
*******DEVK909212**************************
FORM ftp_work.
*******DEVK909212**************************
CHECK FTP_ITEMDOC[] IS NOT INITIAL.
FTP function *****************************************************
DATA : HDL TYPE I,
         L_SLEN TYPE I ,
         ERROR,
         KEY TYPE I VALUE 26101957,
         DEST TYPE RFCDES-RFCDEST VALUE 'SAPFTPA'.
DATA: FTP_RESULT TYPE TABLE OF TEXT.
DATA: P_FILE TYPE RLGRAP-FILENAME.
DATA: L_USER(16) TYPE C VALUE 'SFIS',
        L_PWD(16) TYPE C VALUE 'SFIS',
        L_HOST(16) TYPE C VALUE '172.16.31.17'.
*******DEVK909212**************************
*****根据不同的工厂来抓FTP的信息
CALL FUNCTION 'Z_FTP_SFIS'
    EXPORTING
      BLART = 'S'
      WERKS = FTP_WERKS
    IMPORTING
      HOST = L_HOST
      USER1 = L_USER
      PASS1 = L_PWD.
*******DEVK909212**************************
CONCATENATE l_ersda '.KP' INTO P_FILE.
SET EXTENDED CHECK OFF.
ERROR = 0.
CHECK HDL IS INITIAL.
Connect to server
L_SLEN = STRLEN( L_PWD ).
CALL FUNCTION 'HTTP_SCRAMBLE'
    EXPORTING
      SOURCE      = L_PWD
      SOURCELEN   = L_SLEN
      KEY         = KEY
    IMPORTING
      DESTINATION = L_PWD.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
   EXPORTING
     TEXT = 'Connect to FTP Server'.
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      USER            = L_USER
      PASSWORD        = L_PWD
      HOST            = L_HOST
      RFC_DESTINATION = DEST
    IMPORTING
      HANDLE          = HDL
    EXCEPTIONS
      NOT_CONNECTED   = 1
      OTHERS          = 2.
IF SY-SUBRC <> 0.
    MOVE: 'B' TO WA_ZMSGTA-BLART,
          l_ersda TO WA_ZMSGTA-REFNUMBER,
          SY-MSGTY TO WA_ZMSGTA-MSGTY,
          'MARA' TO WA_ZMSGTA-TBMA_VAL.
    EXPLAIN_MSG SY-MSGID SY-MSGNO ' ' SY-MSGV1 SY-MSGV2 SY-MSGV3
                SY-MSGV4 WA_ZMSGTA-MSE1.
    ERROR_MSG_UPDATA WA_ZMSGTA.
    EXIT.
ENDIF.
CALL FUNCTION 'FTP_COMMAND'
    EXPORTING
      HANDLE        = HDL
      COMMAND       = 'ascii'
    TABLES
      DATA          = FTP_RESULT
    EXCEPTIONS
      TCPIP_ERROR   = 1
      COMMAND_ERROR = 2
      DATA_ERROR    = 3.
IF SY-SUBRC <> 0.
    EXPLAIN_MSG SY-MSGID SY-MSGNO ' ' SY-MSGV1 SY-MSGV2 SY-MSGV3
                SY-MSGV4 WA_ZMSGTA-MSE1.
    MOVE: 'B' TO WA_ZMSGTA-BLART,
          l_ersda TO WA_ZMSGTA-REFNUMBER,
          SY-MSGTY TO WA_ZMSGTA-MSGTY,
          'MARA' TO WA_ZMSGTA-TBMA_VAL.
    ERROR_MSG_UPDATA WA_ZMSGTA.
    EXIT.
ENDIF.
CALL FUNCTION 'FTP_R3_TO_SERVER'
    EXPORTING
      HANDLE         = HDL
      FNAME          = P_FILE
      CHARACTER_MODE = 'X'
    TABLES
      TEXT           = FTP_ITEMDOC
    EXCEPTIONS
      TCPIP_ERROR    = 1
      COMMAND_ERROR = 2
      DATA_ERROR     = 3
      OTHERS         = 4.
IF SY-SUBRC <> 0.
    EXPLAIN_MSG SY-MSGID SY-MSGNO ' ' SY-MSGV1 SY-MSGV2 SY-MSGV3
                SY-MSGV4 WA_ZMSGTA-MSE1.
    MOVE: 'B' TO WA_ZMSGTA-BLART,
          l_ersda TO WA_ZMSGTA-REFNUMBER,
          SY-MSGTY TO WA_ZMSGTA-MSGTY,
          'MARA' TO WA_ZMSGTA-TBMA_VAL.
    ERROR_MSG_UPDATA WA_ZMSGTA.
    EXIT.
ENDIF.
*******DEVK909212**************************
*******CLOSE FTP******************
CHECK NOT HDL IS INITIAL.
CALL FUNCTION 'FTP_DISCONNECT'
    EXPORTING
      HANDLE = HDL.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
    EXPORTING
      DESTINATION = DEST
    EXCEPTIONS
      OTHERS      = 1.
CLEAR HDL.
ENDFORM.                    "ftp_work
*******DEVK909212**************************
FORM DISPLAY_ALV .
*-- PREPARE ALV DATA
PERFORM EVENTTAB_BUILD USING GT_EVENTS[].
PERFORM COMMENT_BUILD USING GT_LIST_TOP_OF_PAGE[].
*-- LAYOUT SETTING
PERFORM PREPARE_ALV_FIELD USING GT_FIELDCAT[].
*-- ALV DISPLAY
PERFORM CALL_REUSE_ALV_GRID_DISPLAY.
ENDFORM.                    " display_alv
*&      Form eventtab_build
      text
     -->P_GT_EVENTS[] text
FORM EVENTTAB_BUILD USING PT_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      I_LIST_TYPE = 0
    IMPORTING
      ET_EVENTS   = PT_EVENTS.
READ TABLE PT_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
                           INTO LS_EVENT.
IF SY-SUBRC = 0.
    LS_EVENT-FORM = 'TOP_OF_PAGE'.
    MODIFY PT_EVENTS FROM LS_EVENT INDEX SY-TABIX.
ENDIF.
ENDFORM.                    " eventtab_build
*&      Form comment_build
      text
     -->P_GT_LIST_TOP_OF_PAGE[] text
FORM COMMENT_BUILD USING PT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
DATA: LS_LINE TYPE SLIS_LISTHEADER,
        L_DATE(30),
        l_v_BWKEY like T001W-BWKEY, "Valuation area
        l_v_BUKRS like T001K-BUKRS. "Firm/Company
Listenerschrift: Typ H
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
LS_LINE-KEY: not used for this type
select single BWKEY
   into l_v_BWKEY
   from t001w
   where WERKS IN s_WERKS.
select single BUKRS
   into l_v_BUKRS
   from t001k
   where BWKEY = l_v_BWKEY.
SELECT SINGLE butxt INTO LS_LINE-INFO
    FROM t001
   WHERE bukrs = l_v_BUKRS.
APPEND LS_LINE TO PT_TOP_OF_PAGE.
Kopfinfo: Typ S
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = '报表名称：'.
LS_LINE-INFO = SY-TITLE.
APPEND LS_LINE TO PT_TOP_OF_PAGE.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = '打印日期：'.
WRITE SY-DATUM TO LS_LINE-INFO.
ls_line-info = sy-datum.
APPEND LS_LINE TO PT_TOP_OF_PAGE.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = '打印時間：'.
WRITE SY-UZEIT TO LS_LINE-INFO.
ls_line-info = sy-uzeit.
APPEND LS_LINE TO PT_TOP_OF_PAGE.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = '使用者：'.
LS_LINE-INFO = SY-UNAME.
APPEND LS_LINE TO PT_TOP_OF_PAGE.
ENDFORM.                    " comment_build
*&      Form prepare_alv_field
      text
     -->P_GT_FIELDCAT[] text
FORM PREPARE_ALV_FIELD USING P_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: LS_LINE TYPE SLIS_FIELDCAT_ALV.
*-- DEFINE MARCO
DEFINE APPEND_ALV_FIELD.
    CLEAR LS_LINE.
    LS_LINE-FIELDNAME = &1.
    LS_LINE-TABNAME = &2.
    LS_LINE-REPTEXT_DDIC = &3.
    LS_LINE-SELTEXT_L = &3.
    LS_LINE-SELTEXT_M = &3.
    LS_LINE-SELTEXT_S = &3.
    LS_LINE-QFIELDNAME = &4.
    LS_LINE-QTABNAME = &5.
    LS_LINE-NO_OUT    = &6.
    LS_LINE-NO_ZERO   = &7.
    LS_LINE-OUTPUTLEN = &8.
    APPEND LS_LINE TO P_FIELDCAT.
END-OF-DEFINITION.
APPEND_ALV_FIELD: 'MATNR' 'IT_OUT' '料号'
                  'O' 'X' ''.
APPEND_ALV_FIELD: 'WERKS' 'IT_OUT' '工厂'
                   'O' 'X' ''.
APPEND_ALV_FIELD: 'MTART' 'IT_OUT' 'MTyp'
                   'O' 'X' ''.
APPEND_ALV_FIELD: 'MEINS' 'IT_OUT' 'BUn'
                   'O' 'X' ''.
APPEND_ALV_FIELD: 'MATKL' 'IT_OUT' '物料组\分群码'
                   'O' 'X' ''.
APPEND_ALV_FIELD: 'MATKX' 'IT_OUT' '物料描述'
                    'O' 'X' ''.
APPEND_ALV_FIELD: 'PSTAT' 'IT_OUT' '维护状态'
                    'O' 'X' ''.
APPEND_ALV_FIELD: 'BRGEW' 'IT_OUT' '毛重'
                   'O' 'X' ''.
APPEND_ALV_FIELD: 'NTGEW' 'IT_OUT' '净重'
                   'O' 'X' ''.
APPEND_ALV_FIELD: 'GEWEI' 'IT_OUT' 'WUn'
                  'O' 'X' ''.
APPEND_ALV_FIELD: 'FERTH' 'IT_OUT' '对外机种名'
                 'O' 'X' ''.
APPEND_ALV_FIELD: 'KZUMW' 'IT_OUT' '高关税标识'
               'O' 'X' ''.
APPEND_ALV_FIELD: 'ERNAM' 'IT_OUT' '创建者'
             'O' 'X' ''.
APPEND_ALV_FIELD: 'ERSDA' 'IT_OUT' '创建日期'
          'O' 'X' ''.
ENDFORM.                    " prepare_alv_field
*&      Form call_reuse_alv_grid_display
      text
--> p1        text
<-- p2        text
FORM CALL_REUSE_ALV_GRID_DISPLAY .
gs_layout-f2code              = 'DISPLAY'.
gs_print-no_print_listinfos   = 'X'.
gs_layout-colwidth_optimize   = 'X'.       "列宽度自动根据内容优化
gs_layout-f2code              = '&ETA'.    "double check弹出详细信息
gs_layout-zebra               = 'X'.       "清单条纹显示
gs_layout-no_vline            = ''.        "是否显示列间隔线
gs_layout-box_fieldname       = ''.        "是否显示checkbox
gs_layout-confirmation_prompt = ''.        "推出清单是否提示
gs_layout-detail_titlebar     = '详细信息'."详细清单的标题
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM                = SY-CPROG
      I_BACKGROUND_ID                   = 'ALV_BACKGROUND'
     I_CALLBACK_PF_STATUS_SET          = 'ALV_PF_STATUS'
     I_CALLBACK_USER_COMMAND           = 'ALV_USER_COMMAND'
     I_CALLBACK_TOP_OF_PAGE            = GT_LIST_TOP_OF_PAGE[]
      IT_FIELDCAT                       = GT_FIELDCAT[]
      IT_EVENTS                         = GT_EVENTS[]
      I_STRUCTURE_NAME                  = 'IT_OUT'
      I_SAVE                            = 'A'
      IS_LAYOUT                         = GS_LAYOUT
      IS_PRINT                          = GS_PRINT
    TABLES
      T_OUTTAB                          = IT_OUT
    EXCEPTIONS
      PROGRAM_ERROR                     = 1
      OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " call_reuse_alv_grid_display
*&      Form PREPARE_ALV_FIELD
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
ENDFORM.                    "TOP_OF_PAGE

Hi,
Please check your field catalog and refer field names once again.
Check spelling, or Check strucutre properly.
There are something wrong in your catalog definition
aRs.

Cannot preview filetype please download the file for viewing and garbled text on a downloaded image

Dear Madam or Sir,
When I click on a file titled "Subject Access Request Letter re Account Number 12527629 Sort Code 60-10-34 24022015.pdf", which is stored in my Account on Acrobat.com I get the response "Cannot preview filetype please download the file for viewing". This file was created from an OpenOffice .odt document of the same title. Please advise.
I downloaded an image, which purports to be a .pdf, from the Royal Mail Track & Trace web facility using my Samsung S5. The text that I expect to see might as well be hieroglyphics for all its similarity to text. Please advise.
Regards,
Ron Platt
PS I have tried to attach both files (.pdf) but am advised "That image type is forbidden". Please advise.

Hi Laura,
I have found the solution to be:
   1. Not to upload to "Document Cloud" from the .pdf stored on my PC and
   open on screen.
   2. To login to Acrobat.com from the .pdf stored on my PC and open on
   screen, select "Document Cloud" and the sub-folder required and then upload
   the file
I have a feeling that there is a glitch somewhere, because after I have
opened a number of .pdf files stored on my PC, and irrespective of whether
I have closed them prior to opening the next .pdf file or left them open,
Acrobat Reader will display (Not responding) in the window title bar. The
"number of files" equates to less than 10. I, then, click on the X at the
right of the window title bar and I am given the option of "Close the
program" or "Wait until the program responds" (or words to that effect). If
i choose the latter, nothing happens and I am back at the unhappy status
quo. If I choose the former, I am told that Windows is searching for a
solution, which it never finds. I, then, have to shut down the PC and then
start it up, again. Clicking "Restart" does not solve the problem.
I have described the above before and received the usual "it cannot be
Acrobat, it is perfect" response. I could, I suppose, screenshot/snip every
sequential screen but why should I have to when I have described the
sequence as fully as I can. So I have found a "workaround" that does not
solve the "Not responding" problem but does solve the problem of not being
able to upload from the open .pdf file to the sub-folder in "Document
Cloud". I am, on occasion, working through the myriad of .pdf files that
are in the root folder of "Document Cloud" and putting them in the correct
sub-folder(s).
I have today read that Google is starting a cellphone service in the USA in
which a monthly "access" rental (US$20) is paid plus a GB capacity usage is
elected for at a rate specified, e.g. US$10.00/GB. If the subscriber does
not use the elected GB capacity Google refunds the US$value of the unused
elected GB capacity.
Suggestion: Adobe applies that kind of policy to its online software
package usage rates, e.g. I elect to subscribe to a particular level of
online software package usage monthly, but, if I do not use all of the
programs included in that online software usage package, I am credited back
for not having used the softwares, that I did not use, that were inclusive
in that online software package offer.
Regards,
Ron

Option to always use sidecar files for XMP

Lightroom gives you the option to write metadata to XMP files, which is convenient if you want to share data with other programs (ACR, various DAM programs). In the beta versions, this data would always be stored in .XMP sidecar files, presumably for safety reasons. However, V1 writes the XMP data into the image file itself for those formats that support it (DNG, JPG, TIFF).
I would really like to have the option to *force* Lightroom to use sidecar files for XMP data, like the betas did. The current V1 behavior (embedding data) is quite inefficient for fairly common backup scenarios.
For example, I tend to back up all my raw files onto DVD after importing and culling. In addition I make a daily backup of all metadata that gets sent over the internet to a web server - a relatively small upload. What happens if I use DNG for my raw files and update something as small as a keyword? Indeed, *all* of the corresponding DNG files are modified, and because my backup software cannot know that only the XMP data has changed, all files must be burned to DVD again. If the metadata were stored in sidecar files, a simple, efficient metadata backup would take care of things.
To implement this, a simple switch in the preferences would suffice, and the necessary code is already there. The only possible problem is the occurrence of two files with identical names, excluding the extension. For this case, I can see four different 'solutions':
1) Force XMP metadata to be synchronized between files with equal names
2) Make an .XMP sidecar file for only one of the files (always the raw file, for example)
3) Update the XMP specification to specify what should be done in this situation (maybe include the file extension in the XMP data)
Reards,
Simon

Actually, I don't (notice the 'if' :)). And this is only one of the reasons. I just picked DNG as an example, to keep things simple and because it seems Adobe wants DNG to work well for photographers.
However, the same applies to JPG and TIFF images. I often end up changing details in the metadata after the image has been finished. For example, to correct the spelling in a keyword that has been applied to half the images in my database... Talking about a nightmare scenario!
Simon

Cannot override codebase to use local files for first time installation.

Similar Messages

Maybe you are looking for