Cannot print a silverlight document to hp-5510-e? what am i doing wrong

I have a HP-550e series printer and a Windows 7 operating system.  I am unable to print a documnet from silverlight.  I hit Control P and nothing prints.  Is there a solution?

This is going to get confusing, but does the silverlight program your trying to print from have the print feature programed into it?  If it doesn't, then you will have to do a screen shot and paste it into paint to be able to print what you're looking at.  Let me know.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

  • TS3376 I have a ipod that I cannot get find my iphone to recognize it?  What am I doing wrong?  I have it turned on in settings.

    I have a ipod that I cannot get find my iphone to recognize it?  What am I doing wrong?  I have it turned on in settings.

    Make sure you are signed into the iCloud ID you are using on the iPod when you attempt to locate it, and that it has a good wifi connection.  If these are correct and you are and it still says it's offline, turn Find My iPod off on it, then after a minute or so turn it back on.  Then see if you can locate it.

  • We are using apple tv to try to access our itunes account on the computer.  We see our library of music but when we click on the song it searches for a long time and then says that it cannot access the itunes store.  Any ideas on what we are doing wrong?

    We are using apple tv to try to access our itunes account on the computer.  We see our library of music but when we click on the song it searches for a long time and then says that it cannot access the itunes store.  Any ideas on what we are doing wrong?

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router.
    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    Restore the Apple TV (Settings > General > Reset > Restore)

  • I set up iCloud on my iPad so I could sync with my iMac and now I cannot open documents on my iPad. What am I doing wrong?

    I have an iPad two running iOS 8.2, with pages 2.5.2
    Late 2012 21.5 inch iMac running Yosemite, with Pages 5.5.2
    Yesterday,following directions in iMac Magazine on my iPad I turned on iCloud for Pages.
    My documents disappeared from my iPad. After finding out how to locate them in iCloud I am unable to open them to edit or even read them for that matter.
    What am I doing wrong.
    Can I get my documents back on my iPad?

    Thanks.  That was indeed the problem.  A few hints for others with this problem.  You can only find out that you need to upgrade, and upgrade, by cabling your iPad to your computer.  Then the next Tricky part is making sure you have your iPad purchases saved on your computer.  Then you download the new OS upgrade and you will get a "start up" type of screen on your iPad with a few questions.  Nowhere is there a very good explanation that you want to then go back to your computer and restore your iPad.  I finally did that because there were no other obvious alternatives, though all the warnings made me very nervous.  After the restore command, I synched my iPad and I seem to have everything back, and I can now access iCloud.  maybe I missed some instructions somewhere, but I found this process much more obscure than the usual Apple directions. Thanks for your help!

  • We cannot get our HP 4630 to print........what are we doing wrong?

    We have tried and tried and tried to install our HP Officejet 4630 to no avail.  What are we doing wrong?

    Go to this site, select you Windows operating system and download the Product Installation Software.  Follow the on screen instructions.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4058&lc=en&cc=us&dlc=en&sw_lang=&product=5305...
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • I cannot sync an mp4 file slideshow to my iPhone5; what am I doing wrong?

    trying to load mp4 slideshow tmy iPhone5. wont cooperate

    Hi Suhazel,
    It sounds like you may have the iPhone configured for selected items.
    With your device connected, choose the Music tab at the top. Let's make sure "Sync Music" is checked:
    Afterwards, you'll have the option to sync "Selected playlists, artists, albums, and genres". Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. If this is how the iPhone is configured, you may need to select the playlist that is not syncing over. Alternatively, you can opt to sync your entire music library. For a visual instruction on how to do this, see the following:
    iTunes 10: Sync to your iPod
    http://support.apple.com/kb/VI72
    Thanks,
    Matt M.

  • I have created a word document but am sending to recipients in pdf format. They told me they cannot open it. Can you tell me what I am doing wrong? Thank you.

    I have created a document in word and sent it to my recipients in pdf format so they would receive it just as I had formatted it. I used an unusual font. But my recipients tell me they cannot open it. Can you help me understand what I am doing wrong. Thank you.

    How are you generating the PDF file? Are you zipping (compressing) the file before sending it? Is Mail configured to send Windows-friendly files?
    If you are using Word to generate the PDF file, then try instead to use the Word Print dialog. Click on the PDF dropdown menu in the lower left corner and select the option to Save as PDF.... You can save the output to the Desktop or any location your prefer. Use that document to send to others via email, but remember to compress the file first.

  • I cannot print oversized, poster, document in Adobe Acrobat XI Pro (11.0.10). The "POSTER" button is gray'ed out.

    I cannot print oversized, poster, document in Adobe Acrobat XI Pro (11.0.10). The "POSTER" button is gray'ed out.

    Point 1: try turning on "Show large images" in your preferences. In Acrobat for Windows, it's under the Page Display preferences. I'm not sure about OS X.

  • I cannot print adobe pdf documents as it is password protected. I forgot my password. How do I fix this problem?

    I cannot print adobe pdf documents. Password protected. How do I fix this problem?

    You'll need to remember it or recreate the PDF from the original file.
    If there were an easy way to get around that, passwords wouldn't be worth much.

  • Hp 1050 cannot print the photo, document with out border

    Cannot print the photo, document with out border, have any solution for border less printing use hp 1050?

    Hello 25bijoy, and welcome to the HP Forums.
    I see you are looking into borderless printing.  Unfortunately, this printer does not support borderless printing.  You can find more information here in the HP Deskjet 1050 All-in-One series User Guide.
    Please let me know if you have any questions. Thank you for posting on the HP Forums.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • I am trying to print redplum coupons and I can't, help.  I have updated java, adobe flash, and made sure my printer was set on default.  I am not sure what I am doing wrong.  I have contacted redplum and no one will help.

    I am trying to print redplum coupons and I can't, help.  I have updated java, adobe flash, and made sure my printer was set on default.  I am not sure what I am doing wrong.  I have contacted redplum and no one will help.

    No Apple response???  Redplum/Valassis will not help either.  I searched, using the cups error message and though it is Unbuntu, same error so maybe useful...only problem: details would not display unless I join Unbuntu forum.  What a pain to do anything with my Mac or find any help.  I honestly regret buying this buggy OS.
    Anyway, here is what I found, FYI:
    http://ubuntuforums.org/showthread.php?t=483415
    As the old saying goes: when in doubt, consult the manual. The problem appears to be that I added the printer using the KDE Add Printer Wizard. It was automatically given a "socket" URI instead of an "lpd" one. When I:
    - altered the printer settings at http://localhost:631 (the CUPS admin page) as instructed in the manual for the printer, and
    - copied the PPD file into a second place on the hard drive (as instructed on ubunutuforums, see the link above)
    ..everything started working.
    It's still slower than windows, but I can live with that
    Probably a simple fix. Change the socket I.P. to match the printer I.P. like this:
    socket://192.168.1.86:9100. The thing I'm concerned with using socket:// is that AFAIK the printer I.P. must not change. In my case I'm able to assign a static I.P. address to the printer but it's something to consider.
    I found that the only thing I needed to do was change socket to lpd (and remove :9100 off the end as well). See Solving Ubuntu printer “broken pipe” problem (DocuPrint C525A) . BTW thanks for steering me in the right direction - very grateful.      
    Solving Ubuntu printer “broken pipe” problem (DocuPrint C525A)
    Posted on November 25, 2008
    Are you having a problem with your printer under the latest versions of Ubuntu (perhaps it worked under an older version)? Are you able to print short documents, but not longer, or more graphics-intensive, documents? (e.g. the unfortunate people at http://ubuntuforums.org/showthread.php?t=625493). Do they sit there as Processing for ages and then switch to Held? If you have the same problem I had the solution I tried may work for you too. Firstly, check your cups error log:
    sudo gedit /var/log/cups/error_log
    If you see anything like the following, the solution may be simple:
    [Job 201] Unable to write print data: Broken pipe
    PID 13359 (/usr/lib/cups/backend/socket) stopped with status 1!
    System > Administration > Printing and right click on your printer, selecting Properties. Settings > Device URI
    If you see something like socket://your_printer_ip_address:9100 just change socket to lpd and remove the :9100 off the end. Then click on apply.
    Apparently lpd is a more modern protocol which works with most printers whereas socket is more raw (and potentially faster but riskier in a network situation). Somewhere along the line, the default Ubuntu/Gnome setup for networked printers shifted from lpd to socket. Some primitive printers will have benefited whereas a larger number of more modern printers will have suffered.
    Please correct me if I am wrong (which is highly possible) but the underlying problem could be that socket may make the printer wait a long time for a large file to be processed ready for printing. Some printers, such as the Fuji Xerox DocuPrint C525A, may drop the socket if things take too long to start coming through.
    Changing timeout settings might work but lpd is better than socket so it is the preferred solution in any case.
    If this works for you, please leave a comment to let others know (ideally with a description of the printer and Ubuntu version). Printer may be relevant if it doesn’t support the direct stream protocol properly. NB I may take a while to let your comment through because of the volume of spam. Sorry about that.
    Finally, thanks to sphilli8 for the steer in the right direction at http://ubuntuforums.org/showthread.php?p=6245626.
          http://ubuntuforums.org/showthread.php?t=483415

  • I Just bought a used 6th gen nano. But when I plug it into my usb it says " an ipod had be detected but cannot be identified properly". I registered it also. What am I doing wrong?

    I Just bought a used 6th gen nano and when I plug it into the usb it says on my itunes page "an ipod has been detected but cannot be identified properly". I have already registered it. What am I doing wrong? Is it a faulty one?

    The following document might be worth a try with that:
    iPod nano: Error message saying that iPod 'could not be identified properly'

  • Trying to connect a Belkin brand audio cable from my MacBook Pro to a Sony flatscreen TV. Cannot get any sound from the laptop out of the TV. What am I doing wrong?

    I'm trying to connect a Belkin brand stereo audio cable from my MacBook Pro to a Sony flatscreen TV (Apple "genius" handed me the cable to purchase.)  I have tried all the ports in the back of the Sony, and tried the volume on both the cable and TV remotes. I cannot get sound out of the Sony from my MacBook Pro laptop. What am I doing wrong???

    Downloaded your operating manual.  It appears that you need to connect the HDMI to HDMI 1 and the audio to the input socket just to the right of the VGA socket (i.e., between the VGA and the RF input connection).  The picture on page13 seems to be the clearest I could find:
    Although it's not exactly clear I think they are talking about a standard 3.5 mm (1/8") stereo jack for the audio inpu as opposed to the more common RCA jacks used in the row just above that VGA input socket.
    I haven't checked the manual as yet whether you need to set anything special with the controls other than input select.
    Note, if that truly is a 3.5 mm stereo jack cables are very common.  In your case it would just be a cable with a 3.5 mm jack on each end.
    Update:
    You will have to experiment with this but I think you will need to try pusing the input button to select either HDMI1 or PC (or Component?).  The manual is not clear on this (page 31).  Sometimes it just comes down to pushing buttons.

  • I am using Firefox 3.6.13 and have installed Windows Media Player 1.0.0.8 for Firefox. However, if I attempt to open a file with a .wmv extension it appears to function properly, except, that I cannot "play" the file. What am I doing wrong?

    # Question
    I am using Firefox 3.6.13 and have installed Windows Media Player 1.0.0.8 for Firefox. However, if I attempt to open a file with a .wmv extension it appears to function properly, except, that I cannot "play" the file. What am I doing wrong?

    You probably have not seen anyone reporting the exact same problem as you. All three crash reports have the same crash signature and as currently ranked 67 it is not the commonest of reasons for a crash.
    I hope you enter your email contact information when reporting crashes. I note you see this crash when using videos, others may possibly see this crash in other circumstances.
    You have already tried the obvious, attempts at a fix so it is now down to wait and see, maybe developers working on the bug will report something or fix it.
    Did you try my suggestion of installing portable ESR ?
    For forum cross referencing purposes
    * Crash Reports for Crash IDs <br />bp-71697f5d-41d4-48ae-9db9-3e6302130607<br /> bp-6e1347bc-153f-433a-9c35-a5f022130607<br /> bp-92a533a2-9e09-4c1e-8df7-deb4c2130607
    *(all three) Crash Signature: EnumSoftwareMFTs(_GUID const&, unsigned int, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, IMFActivate***, unsigned int*)
    * Related bug 858667 NEW crash in mozilla::wmf::MFTEnumEx @ EnumSoftwareMFTs
    *I note this was first seen in Fx21 and is 100% Windows 7
    <br />

  • Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

    Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

    it seems my subscription had expired so I signed up again.. It was still having trouble so I repeated the sign up process again.. Then it worked perfectly.. Unfortunately, I think I just subscribed twice and need to cancel one of them. Ugh. Such a pain when I'm trying to get this project completed. I'll be canceling at least one of the subscriptions in the morning. Adobe is not my favorite company right now. None of this was intuitive. And trying to get help was an absolute waste of an hour.
    Regards,
    Nathaniel
    [removed by moderator]

Maybe you are looking for