Cannot replace lzma-utils due to dependencies from yelp

:: Replace lzma-utils with testing/xz-utils? [Y/n]
error: failed to prepare transaction (could not satisfy dependencies)
:: Starting full system upgrade...
resolving dependencies...
:: yelp: requires lzma-utils>=4.32.7

Allan wrote:
This has been fixed. Wait for your mirror to sync.
(and you should read arch-dev-public... it is recommended for all [testing] users)
i do read arch-dev-public... missed it
just read it, those messages passed before i did the update
Last edited by eldragon (2009-05-31 16:00:44)

Similar Messages

DiskWarrior cannot replace the original directory due to Mac OS failure?

I have a Powermac Dual G5 running 10.4.8. I have a Lacie Firewire 800 RAID attached.
Lacie firmware is up to date and Disk Utility reports no problems with the RAID, either permissions or Repair/Verify disk.
I have run the latest DiskWarrior 3.0.3 on the RAID (both from the boot volume and booted from the 303 rev39 CD) and it detects a formidable list of potential repairs to be done, creation dates on link files etc.
It offers the next step which is to replace the existing directory with the pristine one it has just prepared.
Every time I press 'Replace' it backs out, reporting;
"The new directory cannot replace the original directory due to a MacOS services failure"
(If I run DW when booted from the RAID, it replaces the normal boot drives directory OK btw)
I do understand there used to be a bug in Mac OS Panther and an older DiskWarrior reporting similar to this but why now with 3.0.3?
What does it mean?
Google was no help. Maybe should have come here first
PowerMac G5 2.5 - PB 12" 1.5 Mac OS X (10.4.8) SE30, IIsi

If lots of errors are reported, it is probably a good idea not to replace the directory. Wiring anything to the drives could make things worse. With Disk Warrior run from your boot hard drive, have it create the new directory, but don't try to write it to the disks. You can then use the new directory to copy files from the bad disks to another disk, or DVDs. It should give you a more accurate backup than the old directory, with its errors. Others have reported LaCie RAID systems failing, so get the data while you can. You could then reformat the LaCie with zeroing and see if it generates errors again, maybe running Disk Warrior daily. If your are lucky, the LaCie may be OK then, but I wouldn't trust it.

There is a problem with the photo with the filename "null". The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your book.

Absolutely INFURIATING.
I have spent absolute hours building a photo album for the first year or my sons life. Sorting through quite literally thousands and thousands of images. Got a brilliant looking album using 177 of them.
Now everytime I try to check out it won't get past page 1 of building the book.
It says the following "There is a problem with the photo with the filename "null". The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your book.".
The images all look perfect. I have even tried taking them out and re adding the first page images from the library.
Same problem.
This is so annoying. So far I have NOT been happy with this iphoto application having nothing but problems with missing thumbnails. Corrupted images. Things that have never happened to me using a windows machine.

Do the filenames contain special characters, like "ä,ü,..." or white space or are the vry long? Is there anything special about the image format? Try to export the edited versions in that case and reimport it with a different, shorter filename.
For testing, create a new book with only the images you want to check.
If this does not fix it, try rebuilding. Depress the option and command keys, launch iPhoto and rebuild the library.

Cannot run application HRSystem due to error deploying to DefaultServer.

I am new to java and jdeveloper. I am tring my hands on the tutorial on HRSystem. Below is the error message recieved while deploying the application. Dont know what to do please help.
The plaform is linux. Thanks
DefaultServer startup time: 12661 ms.
DefaultServer started.
[Running application HRSystem on Server Instance DefaultServer...]
Uploading credentials.
---- Deployment started. ---- Jun 2, 2009 3:10:10 PM
Target platform is (Weblogic 10.3).
Running dependency analysis...
2009-06-02 15:10:10.73: Writing WAR file to /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem/HRSystem-ViewController-webapp
2009-06-02 15:10:10.973: Wrote WAR file to /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem/HRSystem-ViewController-webapp
2009-06-02 15:10:57.397: Writing EAR file to /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem
2009-06-02 15:10:57.404: Wrote EAR file to /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem
Deploying Application...
<Jun 2, 2009 3:10:59 PM CET> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application HRSystem is not versioned.>
Jun 2, 2009 3:10:59 PM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
INFO: Cleaning up application state
Jun 2, 2009 3:10:59 PM oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkProviderClass
INFO: JMX Portable Framework initialized with platform SPI "class oracle.as.jmx.framework.wls.spi.JMXFrameworkProviderImpl"
<Jun 2, 2009 3:11:22 PM CET> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem/HRSystem-ViewController-webapp. Please make sure that the annotations are valid. The error is javax.faces.webapp.FacesServlet>
Jun 2, 2009 3:11:22 PM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
INFO: Cleaning up application state
<Jun 2, 2009 3:11:22 PM CET> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1243951858599' for task '0'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'HRSystem-ViewController-context-root''
weblogic.application.ModuleException: Failed to load webapp: 'HRSystem-ViewController-context-root'
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     Truncated. see log file for complete stacktrace
>
<Jun 2, 2009 3:11:22 PM CET> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'HRSystem'.>
<Jun 2, 2009 3:11:22 PM CET> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Failed to load webapp: 'HRSystem-ViewController-context-root'
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     Truncated. see log file for complete stacktrace
>
[Deployer:149034]An exception occurred for task [Deployer:149026]deploy application HRSystem on DefaultServer.: Failed to load webapp: 'HRSystem-ViewController-context-root'.
weblogic.application.ModuleException: Failed to load webapp: 'HRSystem-ViewController-context-root'
#### Deployment incomplete. #### Jun 2, 2009 3:11:22 PM
oracle.jdeveloper.deploy.DeployException
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
     at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
     at oracle.jdevimpl.runner.adrs.AdrsStarter$5$1.run(AdrsStarter.java:1365)
Caused by: oracle.jdeveloper.deploy.DeployException
     at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:413)
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:238)
     ... 11 more
Caused by: oracle.jdeveloper.deploy.DeployException: Deployment Failed
     at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:395)
     ... 12 more
#### Cannot run application HRSystem due to error deploying to DefaultServer.
[Application HRSystem stopped and undeployed from Server Instance DefaultServer]
Edited by: user1423903 on Jun 2, 2009 8:11 AM

Try removing this directory: /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/ and restarting JDeveloper.

Cannot run application handbook due to error deploying to IntegratedWe

I recently upgraded to Developer version 11.1.2.38.60.81 and when I try to run my test template from the handbook built under a previous version I get the following:
<Sep 29, 2011 6:26:38 PM MST> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application C:\Users\Owner\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\o.j2ee\drs\handbook\ModelWebApp.war. Please make sure that the annotations are valid. The error is javax.faces.webapp.FacesServlet>
<Sep 29, 2011 6:26:38 PM MST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1317345997673' for task '0'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'handbook-Model-context-root''
weblogic.application.ModuleException: Failed to load webapp: 'handbook-Model-context-root'
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
     Truncated. see log file for complete stacktrace
>
<Sep 29, 2011 6:26:38 PM MST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'handbook'.>
<Sep 29, 2011 6:26:38 PM MST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Failed to load webapp: 'handbook-Model-context-root'
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
     Truncated. see log file for complete stacktrace
>
#### Cannot run application handbook due to error deploying to IntegratedWebLogicServer.
[06:26:39 PM] Deployment cancelled.
[06:26:39 PM] ---- Deployment incomplete ----.
[06:26:39 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
[Application handbook stopped and undeployed from Server Instance IntegratedWebLogicServer]
I have read thru the other threads but have not found an aswer; can someone help?

Thanx for your reply. I am very appreciative that you and others take the time to reply. I follow your blog and hope to become more proficient in JDeveloper.

After migrating to a new MBP, when saving or opening documents, I sometimes (but not always) get a warning such as: "Word cannot save this document due to a naming or permissions error on the destination volume." Can someone please explain?

I recently migrated from a MBP with OS 10.6 to a MCB with OS 10.8. Some glitches are popping up. Here's the one on my mind at the moment:
When saving or opening documents, I get a warning such as: "Word cannot save this document due to a naming or permissions error on the destination volume." Can someone please explain?

Since this is isolated to a single file, try exporting it to Interchange Format (.inx), then open and save the resulting file as a new InDesign file.
Since the problem occurs during export, that may not be possible. Another option to try would be to copy all elements, page by page, and "paste in place" into a new document the same size. If you used layers, be sure to enable "paste remembers layers" in the layers panel menu.
This kind of problem is often indicative of an underlying font issue. You said there are only three fonts, and you should verify that in Type > Find Font... Try replacing, at least temporarily the fonts in use with something else that you know to be reliable from other documents. You might want to do this before the other steps.
Peter

What do I do if I cannot download mac osx due to no space on my computer?

I cannot download Mac OSX due to not enough space on my computer. What do I do to
create space?

Free up space.
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

Cannot get new token due to device offline state. Id error 40760

Hi,
I have a Blackberry Curve 9380
i can't go in my app world, the message says: Cannot get new token due to device offline state id error 40760
what should i do?
btw, i'm french
thanks!

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
If not, then please try this sequence:
1) Remove AppWorld from your BB
KB10040 How to view or remove installed applications on a BlackBerry smartphone
If it requests that you reboot the BB, do so
2) Do a Batt-Pull reboot (power on, remove battery, wait, insert battery, wait), even if redundant to the one you did in step 1.
3) Install (on your BB) a fresh copy of AppWorld
http://blackberry.com/appworld/download
Again, if it requests to reboot, do so.
4) Do another Batt-Pull reboot
5) See if it now works.
Otherwise, you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

#### Cannot run application Application1 due to error deploying to Default.

Hi all,
Now, I am studing ADF 11. When I run my application, I meet a problem:
This problem, "can not run your application", I try to stop java, or rebuild, or clean my application... but not successfull
*#### Cannot run application Application1 due to error deploying to DefaultServer.*
*[Application Application1 stopped and undeployed from Server Instance DefaultServer]*
*[Server Instance DefaultServer is shutting down. All applications currently running will be terminated and undeployed.]*
*[sending request to shutdown server...]*
C:\oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\bin\stopWebLogic.cmd
Stopping Weblogic Server...
But, If I remove adf 11 software, after that I install this software then okie, and I can run my application.
Help me.
thanks all

Just for the record - my thinking is that there was an application deployed on the integrated server that was miss configured.
Instead of removing the whole system directory - you could just remove the defaultServer subdirectory there.
But even better would have been the option to remove the specific offending application see here:
http://blogs.oracle.com/shay/2009/08/removing_applications_from_you.html

The BEx Analyzer cannot generate VBA code due to the security settings

Hello experts,
when I try to open a query in BEx Analyser I get this error message for each Item of the Query:
Diagnosis
The BEx Analyzer cannot generate VBA code due to the security settings.
System Response
VBA code is not generated.
Procedure
Choose Tools -> Macro -> Security.
On the Trusted Publishers tab page, select Trust access to Visual Basic project.
Choose OK.
Close the BEx Analyzer and continue working as before.
Access to Visual Basic project is only needed when generating VBA code.
This only takes place in design mode or when 3.x workbooks are upgraded.
Of course I did exactly what was recommanded in the "procedure-section" of this error message. But BEx ist still not working!
I use SAP NetWeaver 7.0 together with MS Excel 2007
Thanks
Axel

Hello experts,
I am an additional person interested in the way this issue was solved.
I confirm that the issue is coming from the SP2 of Microsoft Office (I have another environnement without the SP2 and everything works well), and I am in a situation where I can't remove the update.
Regards
Guillaume P.
EDIT :
Solution found : I applied the bi710sp10p_1001-10004472.exe patch
(downloaded via the download maanger : Support Packages and Patches - Entry by Application Group" SAP Frontend Components" BI ADDON FOR SAP GUI" BI 7.0 ADDON FOR SAP GUI 7.10)
Edited by: GUILLAUME PETIAUX on Apr 13, 2010 10:29 AM

ITunes Cannot connect to iPhone due to unknown error (0xE8000065)

Hello!
When I plugin my iphone to a wall, it refuses to charge (it just keeps making a bleeping noise).
And when I try to connect my iPhone to iTunes, I can't. It just says: iTunes Cannot connect to iPhone due to unknown error (0xE8000065)
Any suggestions? I replaced the battery hoping that would do the trick, but nada.
Cheers

iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
Did you try a different charger and a different cable? If it won't charge the error will go away soon also when the battery dies.

Error cannot get new token due to device offfline state

I cant download any app from appworld or even cant access into Myworld. Its says "Cannot get new token due to device offline state.(Error id:40760)"
i reinstalled the appworld but its the same thing happening.Besides i have reset my BBID pasword through email as i forgot that. when i try to access in my mobile's bbid it says"Unable to update Blackberry ID account informtion while offline".
it seems smthing wrong with the "offline state".Actually whats this thing?. i am using curve 9300 without BES or BIS but with the normal edge internet enabaling apn settings for five months.every thing was fine.but this problem is occuring for two days.my browser and other installed apps working fine but not the appworld.Please Help me....................

Hi,
I have the same problem, cant download any app from appworld or even cant access into Myworld. Its says "Cannot get new token due to device offline state.(Error id:40760)"
I am using Bold 9700 without BES or BIS but with the normal edge internet enabaling apn settings for five months.every thing was fine. But this problem is occuring for two days.my browser and other installed apps working fine but not the appworld.Please Help me....................

HT1657 How do I get a refund if the movie I rented cannot be played? (due to iTunes "unknown error")

How do I get a refund if the movie I rented cannot be played? (due to iTunes "unknown error"?)

I'm not sure whether rentals appear on your purchase history, but try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that film and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
If it doesn't appear there (or if that process doesn't work, it's been taking some people to this site on a browser instead of showing a form in iTunes), then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

Fixbspflvr_nt64.exe cannot start or run due to incompatibility with 64-bit

Hello Folks,
Before doing an upgrade from DB2 9.5 FP 4 to 9.7 FP 2, when executed fixbspflvr_nt64.exe as per SAP Note 1332109 got
the following message:
"The program or feature fixbspflvr\fixbspflvr_nt64.exe" cannot start or run due to incompatibility with 64-bit versions of Windows. Please contact the software vendor to ask if a 64-bit Windows copatible version is available"
We are using AMD64 hardware. Did some one had the same issue and got resolution, please share...
Thanks,
Shyam

Hi Shyam,
Did you get any solution from SAP?
I am facing the same problem. I am unable to start my upgrade. I have raised SAP OSS message but I am yet to recieve a reply.
The tool is no longer available on IBM website too as they have released Fix pack 3.
Yuur help will be appreciated.
Thanks and Regards,
Karan Shah

[SOLVED]yaourt wants to build dependencies from AUR

Hi,
I've installed kdemod4... the only problem is that yaourt wants ti install all the dependences of the package(s) i've choose from aur, altough dependencies are present in extra (correct version). How can i solve this??
An example is:
cairo-lcd: i have to build all the dependencies from aur, like libpng,etc; but i see from PKGBUILD that the version that needs cairo-lcd is present in extra repository...
thanks in advance
Last edited by chesterfork (2009-07-13 10:07:26)

..i'm running kdemod 4 x86_64...so if i try install everything using yaourt the dependencies are shown in this way:
==> lib32-cairo-lcd dependencies:
- lib32-gcc-libs (building from AUR)
- lib32-libpng (building from AUR)
- lib32-libxrender (building from AUR)
- lib32-fontconfig (building from AUR)
- lib32-pixman (building from AUR)
- lib32-xcb-util (building from AUR)
if it could help i found this:
chesterfork ~ $ yaourt -S lib32-cairo
lib32-cairo not found on AUR
Packages that were installed as dependencies but are no longer required by any installed package:
error:
what about the error? it's a blank line.... i checked yaourtrc in /etc but it seems ok..
It's happen even if i have these packages installed (and checking in pkg build they have are the same version). EVERYTIME yaourt shows that; cairo, cairo-lcd, bin32-skype-lib32-cairo-lcd....eveything i tried it needs dependencies from aur ONLY. That's the problem....there is a solution??

Cannot replace lzma-utils due to dependencies from yelp

Similar Messages

Maybe you are looking for