Cannot see Business areas in Admin (4.1.48)

Hi,
I have created a number of business areas in Discoverer Admin (4.1.48) and have granted them to users to use in desktop version.
This was working fine until today.
We had a refresh of the test environment yesterday and I was able to access the areas fine today until I created a new one - then all the pervious ones disappeared.
The strange thing is that I can still see all the previous ones in Desktop version. I have checked the security and privileges and all seem ok. and I am using the same log on for both
Anyone know what is going on?
Thanks
Michael

Russ,
I think that if is was a permissions problem then you wont see the business
areas in the desktop either.
Most likely that the desktop and admin uses different euls.
In Desktop go to help about menu to see the EUL used.
Do the same in discoverer desktop and compare the euls used.
Regards
Roelie Viviers

Similar Messages

Not able to see business area in some fi doc

hi ,
In some FI doc for inventory g/l account in which direct posting is not allowed does not display business area however we can able to see business area in corresponding migo document . how to avoid this .
Thanks and Regards ,
Shikha

HI
Take that Inventory GL accont and open it in FS00 and check what field status used
And open that FS group in OBC4 then double click on Additional account assignments then make business area as optional entry and try
Thanks
Vishnu

Users cannot see business rules

Hi All,
good morning.
I ma having strange problem with business rules.
I migrated my business rules from version 9.0 to 9.3.1.
only admin was able to see business rules.
I tried to add access to all users but when the users are not visible in users list.
Checked shared services they are provisioned as users.
refreshed users list....no use.
I ran out my options.
can anyone help me out
thanks in advance.

HI
There are many options so ill give you some:
verify that the users/groups have “planner” & “basic user “ role in HSS.
Verify that you define “planning location on the HBR”
if you giving access based on groups try to see what happened if you give the access to the user and not the group and specific HBR.
Try stop\start planning web, AAS and RMI services.
I hope it will help you.
AE

XI Post Installation: Cannot see Business Service Test

Hello Everybody,
I have installed XI.
At the stage, Checking the Installation Part 2:
I have to create a new Business Service: Test
Save the service and then Activate the Change List.
I did all of that, but when I enter transaction SXI_CACHE on the ABAP side and then double click SERVICES, I cannot see the Server: Test .
Does anyone know why this Test Business Service does not appear ?
Also, I have not yet installed the SLD, can I have an XI system without an SLD ? If I want to install the SLD, can I do this as a separate step from SAPINST or can it only be done as part of the XI installation ?
Thanks,
Petr.

Hello,
I have checked in the Change List TAB and it is empty, if I change the search to include closed then I can see my Business Service.
When I open SXI_CACHE on the ABAP side the Services are empty and if I try to clear the SXI_CACHE with F6 or Shift-F6 I get this error:
Unable to refresh cache contents
Error during last attempted cache refresh
Error ID Business System
LCR_GET_OWN_BUSINESS_SYSTEM_SLD_API_EXCEPTION
Could this be caused be me not yet installing the SLD, and as I don't yet have an SLD I didn't to the SLD related parts of the XI post installation tasks ?
Thanks,
Petr.

Cannot see business system in integration directory.

Hi all,
I am trying to configure a simple file to idoc scenario (from the starter pack) . I have created a third party technical system and assigned it to a business system.
I have configured the scenario as given in the exercise scenario in the integration repository.
In the Integration directory, i create a new configuration scenario . Now i go into the service without party , and try to assign a business system . However, here , in the list of business systems available from the SLD, i cannot see my business system . Could anybody help me find out why this is happening ?
p.s. while creating the technical system , i have given 'localhost' as host, since i didnt know what to give here and thats what most other technical systems in the SLD contained. could this be the problem ?
Thanks,
Joe.

Looks like the much abused points system is having a bad day on SDN
I am glad actually - will keep the spammers away
A Thank You is all that drives and should drive SDN
Regards
Bhavesh

Cannot see Business Rules in Planning

Hi,
I am not able to see business rules in Hyperion Workspace 11.1.2.1. I have provided access to the admin group and assigned the BR to the correct planning applications and planning server.
I am able to view them in EAS but in Planning, i am unable to do so.
Any idea what i am missing?

I take it you have recycling the services to rule out a communication issue, if so have you checked the logs for any errors.
Also it is worth having a read of the following Oracle Support doc - "Hyperion Business Rules Visibility Within Hyperion Planning [ID 1110438.1]"
Cheers
John
http://john-goodwin.blogspot.com/

Cannot see workbook area in Test system

Hello,
i have the following problem in viewing my Workbookareas. I created a wkbookarea in dev system and transported it to the test system. It is visible in the database of the dev & test system, but when i try to open it in the test system in Bex analyzer, i cannot see it. The Basis people cannot find it too with workbook area search in the dev system. how can i solve this problem? Any suggestions? Pls help. Thanks.
SD

Hi,
Did you transport workbook and its role. even though it may not be visible, it will exist (verified via Table RSRWBINDEXT).
Regards,

CAN'T SEE BUSINESS AREA IN DISC DESKTOP

Hello,
I have recently created a new business area in discoverer administrator with user A. I have cheched under security and privleges and everthing seems to be as it should. After that I went to Desktop to create a new workbook, but when I would like to select items that will be in my workbook I don't see any business area...Is there any special reason?
Thanks for help,Peter
Message was edited by:
PeterSI

Hi Aparna
actually I was not. I thought that if i log with a user A he will be using his own EUL by default (I created the user and eul just before creating BA, then I logged to desktop after that with the same user). So in deskotp I went under tool to change EUL and it worked.
Thx and have a nice day,
Peter

Urgent: Datatype change, cannot refresh business area

First time I've pulled the Urgent thing but I have a problem. We had a datatype change for an ID field and I cannot refresh the associated business area because it get the following error message after it analyses the differences. There are several areas where this field is referenced, but it is only showing me one. When I try to refresh I get the following:
"This item is used elsewhere, its datatype cannot be changed".
The item is used in several joins within this business area. If they are all changed when the business area refreshes, things should work fine. Any thoughts?

So in the database you changed the datatype for this ID field. This ID field I assume is a foreign key in other database tables. Where those tables updated also to the new datatype?

Can't see business areas in Discoverer user edition

I have setup a business area and folders in admin edition. But when I go to user edition I don't get the list in available business areas. The folders are set to 'visible to user'. What could be the reason.
Thanks in advance.
Alok

Each user much have (security) access to the business area,
and have the 'user edition' privledge.
Both of these settings can be found in the Administration Edition
under the Tools menu.
While you're there, you can review the settings for the Query Governor
as well.
Regards,
John Hagel

Initialized Planning application,but cannot see business rules(scripts).

Hi All,
I am new to Hyperion and would really appreciate your help. I created a blank planning (11.1.1.3) classic application and initialized Capex planning (Edit->initialize capex), and then created and refreshed database so that it appears in Essbase too. I can see the application in essbase and in Planning, I see the data forms and dimensions,member formula...etc. When I open a data form it shows me the business rules at the left bottom and I can execute them and select run time prompts. But when I go to calculation manager and select the same application, to see the the actual scripts how it is designed( basically wants to learn how the scripts are desined, calculation functions and all) under Rules and scripts, I do not see the scripts anywhere. I have tried this 4-5 times by creating fresh new application( I also tried workforce planning & same problem) with one plan type,more than 1 plan type but its now working. Can someone please help me from your experience what could I be missing and why its now showing there.
Thanks for your help in advance.
Edited by: 974509 on Dec 3, 2012 6:14 PM

Hi,
While creating the application what "Calculation Module" had you selected.
If you want to use calculation manager you need to have the calculation module as Calculation Manager.
Planning Calculation Manager Administrator enables you to create business rules using Hyperion Calculation Manager.
Refer following link for more reference: -
http://www.oracle.com/webfolder/technetwork/tutorials/obe/hyp/PLN11.1.2_ClassicApp/index.html (Point 2)
Hope this helps.
Regards
-SM

Cannot see Business Objects Repository in SAP production server from Worskpace - SMP 2.3

Hi all,
I have problems with reading RFC from production server, because BOR isn't visible at all in Mobile Workspace. Maybe I do something wrong so let me explain what am trying to accomplish. I need to make applications work on production server. Until now they worked and were tested on development server. Applications are native Android with MBO (SMP 2.3.3). So my guess is that I need to transport RFC functions from development to production, which I did, then to make new connection to production server in workspace and generate MBOs and code from them that will finally replace the old MBO code in Android application. If that is the procedure, then the only problem is that I can't see those RFC in production. My user have sap all privileges and in them S_RFC authorization object so I guess authorization isn't the problem. I also tried to switch the language in workspace connection because last time (on development) that was the problem. Any idea somebody?

Well there is only one mobile server. I don't know exactly how they (client) think it will work but when I say production server I refer to SAP EIS production server.
Anyway the solution to the problem with BOR visibility is this note:
Note 706195 - BAPIs are missing in the component hierarchy display
Thanks Midhun! I will probably have more questions..

Cannot see Business Objects LiveOffice menu in MS Office 2010 application

Hi,
I have installed BO XI 3.1 and am trying to use LiveOffice on Windows 7 64 Bit using MS Office 2010. I am unable to see the LiveOffice Add Menu / Ribbon. I am also unable to add it as a new add in from the File > Options > Add Ins menu.
Can you please suggest a solution? Does BO liveOffice work with MS Office 2010 applications?
Thanks

hi,
Please refer below links.
http://www.forumtopics.com/busobj/viewtopic.php?t=152392&sid=f887b368a9bec079305d6d6677a7ce00
BusinessObjects LiveOffice for MS Office 2010
Regards,
Vamsee

Reg.Business area configuration

Dear All
Please find the below link where I have showed my problem.
Help me.
http://www.4shared.com/dir/7442981/adadb941/sharing.html
Thanks
Rajakumar

Dear Rajakumar
1) Go to ovf2 and see what rule you have maintained there.
2) If it is 1, go to ovf0 and maintain the business area to Plant and Division
3) If it is 2, go to ovf1 and maintain the Business Area by Sales Area
As I already said, you cannot enter Business Area manually in VA02. It will automatically fetch based on the control you defined as above.
thanks
G. Lakshmipathi

Assignment business area

hello all,
the scenario is my client has 2 plants and one gl account for both and they want to see plant wise report and i had created business area for all plants which can be assign to all income and expanse accounts through primary cost element. but the problem is ican see business area wise gl report for one plant only , is it possible to assign two cost center in one gl account.each cost center is linked with different business area.i think i cannot be possible.
suggest.

Hi
Assigning more than one cost object to a document is possible but assignment of two cost centers to the same document is not possible.
Because when two cost objects are assigned to one transaction one cost object will receive the real posting and the other will have the statistical posting.
In your case assigning two cost cnters to the one line item is not possible.
Hope this helps
Good Luck
Hari

Cannot see Business areas in Admin (4.1.48)

Similar Messages

Maybe you are looking for