Cannot see my shopping cart, all else seems to be working

I downloaded iTunes 7.0 for Windows two weeks ago. Since then, I haven't been able to access my shopping cart. I recieve the following error: "". I ran the network diagnostics, and everything appears fine on my end. I AM able to access the iTunes store, and to add thigns to my shopping cart, and to hear song samples.
Is the store down? Is something in my profile corrupt?
Thanks,
JesterJ

To see the songs on the iPod when it's connected to the computer, is this what you are doing?
Select the iPod in the iTunes sidebar, under DEVICES. Click the little triangle next to the iPod, so that it points down, and you should see a "drop down" list of iTunes media types, indented under the iPod. On of them should be Music, and your playlists (that are on the iPod) should also appear on this list. Select Music, and over to the right are all the songs that are currently on the iPod.
You should be able to see these songs when using the iPod (as an iPod). So, the second question is, how are you playing (looking for) the songs on the iPod? By playlist? By artist? By album? By genre? Some other way...?

Similar Messages

Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all. There is no "device" folder in the left column. This may have occured after an Apple I-Tunes software update, but I am not sure. Software or hardware??

Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all. There is no "device" folder in the left column. This may have occured after an I-Tunes software update, but I am not sure. Is this likely a software issue or is the shuffle not working correctly?

Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all. There is no "device" folder in the left column. This may have occured after an I-Tunes software update, but I am not sure. Is this likely a software issue or is the shuffle not working correctly?

Takes too long buffering on you tube, cannot see some videos at all.

Takes too long buffering on Youtube, cannot see some videos at all. Have gone out of youtube and come back in again. have restarted the computer several times. Have come back later and tried again with the same results.

I don't have this problem - but a bunch of other people have youtube problems since upgrading to Yosemite.Yosemite 10.10.1 causing Safari not to play YouTube videos...

I spilled a small amount of wine on my macbook pro, I know, killing myself over this! I dried it fully but 24 hours later the keys are very sticky and it won't find the Bluetooth module - everything else seems to be working fine. Thanks for any tips!

I spilled a small amount of wine on my macbook pro keyboard, I know, killing myself over this! I dried it fully but 24 hours later the keys are very sticky and it won't find the Bluetooth module so I can't use my magic mouse - everything else seems to be working fine. Thanks for any tips!

Your keyboard will never be right again; it needs to be replaced. There's no effective way to clean sticky stuff out of it. Your Bluetooth module may have been shorted out and destroyed, and it probably isn't dry yet after only 24 hours.
Take your machine in for repair, and expect a hefty bill in the hundreds of dollars.

Can the requiqitioner see his shopping carts in check status

Situation :
I (X) want to make a shopping cart for (Y). I do this by using the shop on behalf transaction and putting (Y) as requisitioner for my user in PPOMA_BBP. When I shopped for Y, Y needs to check, change or display the shopping cart in his check status transaction.
I tested this in the test system but does not work. Can anyone tell me if this is possible in SRM. And which settings need to be changed.
thanks for your answer
Jimmy

Hello Jimmy,
The standard behaviour of this process is, for example:
User1 shops on behalf of User2.
User1 can consult the document via Check Status selecting the flag 'Bought on Behalf' and typing the shopping cart number.
Also, User2 can check the document via Check Status transaction normally.
Best Regards,
Ricardo

How to see "completed" shopping carts in Shopping Cart POWL?

Hi,
We are running SRM 7.0 SP 6 in Extended classic scenario. (And for some prod. cat. we run classic scenario)
Our issue is that we would like to have th possibility to display shopping carts, that has been completed (GR is made on the PO).
These are not visible in the Shopping Cart POWL from Standart SAP, how I make the completed SC visible in this POWL?
/Brian

Hi Brian,
I think the qucik criteria miantenance section does not have the criteria field "including completed shopping cart". Atleast it was not there in suppor pack 5.0 , could be a bug with SAP.
Alternative is to go to advance search and from there for SC you will have the criteria including completed SC option check that and you will get.
You can create your own Query from the template for SC and that have the option including completed shopping cart.
Cheers
Iftekhar Alam

X-Plane org cannot process my shopping cart and they say my security settings are too high;I have enabled popups from this site and still no joy. I.E. allows it

Are there other security settings I need to relax so that Firefox allows X-Plane.org to process my shopping cart. I can still process the order using Internet Explorer.

This can be caused by corrupted cookies or cookies that are blocked (check the permissions on the about:permissions page).
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
If clearing cookies doesn't work then it is possible that the cookies.sqlite file that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other present cookie files like cookies.sqlite-journal in the Firefox profile folder in case the file cookies.sqlite got corrupted.

Cannot see photos in RSVP; everything else in Firedfox works just fine

I was in RSVP, either clicked, or double clicked on a photo, to copy it ( have done this successfully before ) and not only that photo, but all other photos have disappeared
When I open RSVP, no photos
I have contacted RSVP - they have no idea
claim it will be a browser problem
everything else on my system, including all other applications with Firefox, work just fine

See this: 
https://support.mozilla.com/en-US/kb/Images+or+animations+do+not+show

Shopping Cart creation through describe requirement not working.

Dear All,
         We are in to technical upgrade of SRM 4.0 to 5.0 (CS). With SRM 5.0 we have ECC6 as a backend system.
         On SRM 5.0, we could successfully create SC from Internal Goods/Services & against that shopping cart a PO gets created in backend. But when we try to create shopping cart from describe requirement the system throws following error messages,
1.     Enter company code
2.     No logical system for FI maintained. Inform system admin.
3.     Error in account assignment for item 1
4.     Error in partner transfer
5.     Not possible to calculate tax
Plz, help to solve this error.
Regards,
Vivek

Hi
Try to clear one by one error
What is the company code in BAsic data of SC?
Run a report BBP_CHECK_CONSISTENCY for that user for sc.
Howerver verify these following configuration.
Implementation Guide (IMG): Supplier Relationship Management ® SRM Server ® Cross-Application Basic Settings ® Account Assignment ® Define Account Assignment Categories
Implementation Guide (IMG): Supplier Relationship Management ® SRM Server ® Cross-Application Basic Settings ® Account Assignment ® Define G/L Account for Product Category and Account Assignment Category- here there is a setting Product category, Accounr assigmnment (CC,WS , logical system name anf Gl acount) check it upi.
Most of the data comes from your org structure only. However check it your settings which i mentioned.
regards
Muthu

Saved Shopping Cart Display/Edit functions are not working

Hello SRM experts,
The problem that I have is that the buttons like Display, Edit, etc are not working on a saved Shopping Cart. What is the best way to debug this problem? How would I find out what methods are being called on the SRM system or if some entries are missing in some table for BUS2121?
We are on SRM 7.0 PPS SPS 5, Portal 7.01 SPS 5.0.
Thanks,
Mani

Hi Mani,
We are also facing a similar issue. Our protocol is HTTP throughout but still the issue persists.
Can you shed some light on any other config that you changed?
Regards,
Nikhil

Safari is locked. Everything else seems to be working fine

I am trying to use Safari on my IPad and it is locked. Everything else in the Ipad works. I think it because I tried to download some software.

First close Safari in the multitask window, double click the home key and when the window opens hold your finger on the Safari icon until it starts to wiggle and the red minus sign is in the left corner, touch the minus sign to close the program, then open your settings and click on Safari then click on clear history, then restart your iPad by holding down the on/off and home buttons at the same time until your see the Apple logo.

CS5 Merge to HDR Pro. Cannot see images? Or something else???

Hello,
I am unable to use the automated Merge to HDR Pro.. at all.
Either from Bridge or PS File >auto>select files etc..
I select the files (tiffs) and click Go/OK whatever and the images appear for a few seconds each , then a transparent layer and then 'nothing'
No message, no error - nothing, just the PS screen??
If I try from Bridge the tools selection of PS brings up a working on images box and then I am told that it could not find any images??
I am trying to follow the video instructions on the adobe site but my CS5 just doesnt do what they say it should.
I have just completed a complete reinstall to no avail.
Any ideas??
Thank you.

Hi:
I had problems until recently with the Merge to HDR. It seemed to work only in 32 bit mode and in 64 bit I would get crashes. You might try 32 bit mode for now but ultimately the problem was with corrupt fonts. When these fonts were trashed, the problem was resolved.
Herman R.

ITunes cannot read contents of iPod - all music seems to have dissapeared

Hello,
I've had a 160 GB classic iPod for a bit more than a year (so out of warranty) and hadn't had this problem before until today. When I connect it to my computer iTunes sends a message saying it cannot read its contents and asks to restore it. If I do I loose the 100+ GB music I have on it, if I don't when I disconnect the iPod from the computer, it says there is no music, although the space is occupied (only less than 60 GB free space). I've restored and reloaded my iPod several times, and every time I connect it to iTunes the same thing happens. I should mention that I have iTunes set up in manual mode, and that the problem happens only after I play something on the iPod disconnected from the computer (that is, if I connect it and disconnect it, things are fine, until I try to play something on the iPod).
Can anyone help me? After reloading my iPod with music I'm afraid of connecting it to the computer and losing everything, but I cannot load new stuff on it any other way.
Thanks!

*Check your iPod with Diagnostics Mode*
It's possible that your iPod's hard drive has started to fail. Take your iPod and place your right thumb on the centre SELECT button and your left on the top MENU button. Press down both thumbs for about 6 seconds until your iPod reboots. Immediately move your left thumb around to the rewind button |<< on the left and hold this down together with SELECT for a further 6 seconds. Your iPod should now switch into Diagnostic Boot mode. Press MENU for *Manual Test*, then select *IO > HardDrive > HDSMARTData* to reveal your stats. For comparison here are mine for my 2 year old 6th Generation Classic:
Retracts: 889
Reallocs: 12
Pending Sectors: 0
PowerOn Hours: 2202
Start/Stops: 894
Temp: Current 24c
Temp: Min 10c
Temp: Max 50c
Take a note of your results. When finished press *SELECT & MENU* for 6 seconds to reset the iPod again.
With modern disc drives sectors are no longer marked bad by a disc scan, if the SMART firmware detects a sector it has trouble accessing it will attempt to invisibly reallocate it to a spare area of the disc.
Note that I've only 12 remapped sectors and none pending. To help explain what the numbers mean here is an extract from the Wikipedia S.M.A.R.T. article:
*Reallocated Sectors Count*
Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
*Pending sector count*
Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
Large numbers of Reallocs or Pending Sectors would suggest your drive is failing and that you may need to repair or replace your iPod. Check your stats after another attempt to update your iPod. If the numbers increase that again points to hard drive failure. While it won't be good news at least you'll know it isn't some random software problem and you can decide what to do next.
<hr>
If your iPod checks out OK try this tip for rebuilding it...
*Break up large transfers*
In iTunes select the menu item *File... New Smart Playlist*. Change the first drop-down box to Playlist, the next to is and the next to Music or whatever playlist holds the bulk of the content you want on your device. Tick against *Limit to*, type in say 10, then change the drop-down to GB, and set the last drop-down to artist. When you click OK you can enter a name for the playlist, e.g. Transfer. Now sync this playlist to your iPod rather than your entire library. When the sync is complete modify the rule ( *File... Edit playlist* ) to increase the size by your chosen amount, then sync and repeat. You can experiment with different size increments, if it doesn't work just choose something a bit smaller until it works each time. Before long you should have all your music on your iPod. Once that's done you can move on to other media such as podcasts, videos, photos, playlists etc.
tt2

Time Machine Restore Interface not working (all else seems fine)

I needed to get into Time Machine the other day to restore a file I acccidentally deleted. I entered Time Machine to resore interface. The timeline on the right shows all the past backups but the I was not able to call on any of the backup dates and times. The two arrows to the bottom right of the screen did not allow me to sift through the windows either. I know that the Time Machine is working and creating backups, and when I go through Finder to the disk, all the backups are there. I was able to restoree the file I need using Finder and that was no big deal. But that still leaves non-working restore interface which is something of a nuisance. Does anyone have the same problem?
I am using MacPro 4.1 running OS X 10.9.3. My TM setup is to internal dedicated HD, RAID1 set up via disk utility. The disk size is 2TB and currently has about 1.6TB of data (400GB free).
Any help would be appreciated,
Thanks in advance,
Heidi

I feel exceptionally stupid.
The default window that appears on the restore interface was set to a particular folder from a drive that I do not backup on Time Machine. I was trying to go to the date that I wanted to restore from first instead of navigating to the file I needed to restore. Once I chose one of the drives/folders that I back up on Time Machine, all was fine. I wish Time Machine would make the distinction obvious by graying out excluded items right away (when you go back in time, that does happen but not in the 'present' screen).
Hope above helps in the future for those who may encounter the same problem before having had their first cup of morning coffee.
It is good to know that Time Machine is working as it should, and I count myself one of those fortunate ones who do not have to use Time Machine to restore files that often (hence this elementary question: file under "my computer's not working because I didn't check to see if it's plugged in before calling customer service").

Windows does not open and I cannot see my desktop at all

I have a 2-year old T60, on which I recently tried to defragment files to free up hard space. Now, when turned on, it displays a message that the \WINDOWS\system32 file is corrupt or missing and that I have to reinstall windows with the CD-ROM, but I don't have it anymore. Can anyone tell me how I could possibly find this file and fix it?

Two steps to be executed to determine if the system can be recovered:
1. Easiest, boot the system and access Windows boot options (F8) and select "Last Known Good Configuraiton",..but this is unlikely to succeed if your system hive is truly corrupt since the LastKnownGood is inside the file you may be having issues with. This recovery option needs to verified since it only takes seconds and foolish to execute the next step w/o verifying this one.
2. The registry hive could be corrupted and a chkdsk will fix it, the Catch22 is Windows has a boot time chkdsk feature but it has to load the system hive first,....well if you system hive is corrupted then you'll never load the base components to execute chkdsk. You can create a Bart with PEbuilder but this is a task that requires a skilled novice or interim level expertise, if this is intimidating then you can download a shareware 14 day trial version with a genuine email address for your temporary license key and visit http://www.avast.com/eng/bart-demo-request.php download a compiled version of BartPE ISO.
If you aren't familiar with ISO's or how to burn an ISO then you need the assistance of tech since recording ISO's is a rudimentary task compared to what you have to do next--
Boot the PE enviro from your CD (you may have to press F12 at powerup to access your Boot Options menu
Execute the PE environment and start a command / DOS shell
chkdsk c: /f /x
Press Eneter (DUH, if you need to be told to press enter.....get tech help nub ((if you don't know what "nub" means..... you need to stop repairing your own gear))
Take note of any file errors during the chkdsk, there will be a tally report at the end of the process and depending on how badly the disk is chunked up or how large the disk is...this could take hours to finish.
If that fails, then you'll have to explore professional troubleshooting options or the possibility of a reinstallation becomes larger.
Don't just sit there, take a second and use the Kudo's button to compliment the people who help you.

Cannot see my shopping cart, all else seems to be working

Similar Messages

Maybe you are looking for