Cannot send/receive mail on POP account

Sorry I read previous threads about hotmail.
I have been trying to configure a pop account and an exchange account and have been unable to do such. Using a different macbook with OS 10.5.3 I was able to successfully. Any ideas what the issue might be or how to resolve?

Hi! If you have done it successfully on another Mac then use it to confirm the settings on each mail setup page including the advanced options to make sure every field is correct. Tom

Similar Messages

  • Cannot send/receive mail on POP or httpmailm

    A couple weeks ago I had no problem with sending/receiving hotmail using the httpmail 1.5 plug in. I have NEVER been able to configure a POP account.
    Having two MacBooks side by side with the same OS 1.5.3 the other mac book was able to configure. I used the utility and checked permissions, this is when the httpmail stopped.
    Now what??

    The plugin no longer works and will not be updated.
    http://sourceforge.net/forum/forum.php?forum_id=818174

  • Cannot send/receive mail and stored notes disappeared

    Suddenly lost all stored notes-theicon is there and i can make new notes, but all of my stored ones disappeared along with my mail stopped coming and going.  I have powered on and off several times, deleted and reset email account, and I still cannot get or send mail!  I received mail this morning, then out of nowhere it stopped.  I was unable to send emails for the past few days as well.  I only did the ios6.1 update after noticing these problems this morning, hoping that would restore my emails and notes but it did not.  Help??

    if your syncing notes with icloud go to settings>icloud turn notes off and then back on.
    also log in to icloud.com from a computer and check to make sure your notes are there.

  • Help please: can't receive mail on POP account.

    Can someone help me? I can't receive emails on my POP account. I am using 10.6.8 os and apple mail 4.6. I'm able to send messages using port 587. Trying to get ready for business launch on Wednesday. Thanks for your help!

    Just curious - were you ever able to receive mail or did you recently set this account up and encounter the problem?
    As a paying Dreamhost customer, you should have access to their 24/7 tech support. The basic Apple mac.app account set-up is very straight-forward (at least with web mail).
    If this is a new account with no received messages, simply deleting it and going through the set-up again is no big deal. Remember, use IMAP instead of POP3 to receive messages. POP3 pulls the only copy of the message off the server and delivers it to your mail client/computer. Since there is no back-up copy of the data on the server, this is bad news if anything happens to it locally.
    Here's a basic tutorial on adding/deleting accounts (just in case):
    https://www.youtube.com/watch?v=84cYMuVsLp0
    Check out this thread as well - appears that even after deleting an account the name of the old account might remain:
    https://discussions.apple.com/thread/4094214?start=0&tstart=0
    To summarize, I would try the following:
    1.) Contact Dreamhost and explain your issue - it could be a problem on their end. Don't be shy about using their tech support; you pay for it!
    2.) If Dreamhost finds nothing amiss on their end, you could delete and re-enable your account via mail.app (keeping in mind the caveats about backing-up all received POP3 messages and the potential sender account bug from the thread). Use IMAP if possible.
    3.) If that does not work for you, try another Mail client. I recommend Thunderbird, but there are other free options:
    http://mac.appstorm.net/roundups/communication-roundup/8-awesome-alternatives-to -mail-app-on-your-mac/
    I doubt that this is causing the problem, but you could also disable your firewall (System Preferences > Security & Privacy > Firewall) and see if that changes anything.
    Hope one of these works for you.

  • Outlook 2010 cannot send/receive mail AND states mailbox is being optimized due to upgrade AND outlook hotmail connector needs updating.

    As of 2014-March, the same thing happening on my system. This seems to have occurred, after the latest batch of 28 patches (including SP2 - KB2687455) from Microsoft Updates applied on 13-Mar-2014 and 19-Mar-2014.  I have been running Outlook 2010
    since it was first available.
    An unhelpful error is thrown, after trying to manually perform a Send/Receive:
    Not Implemented
    While in Outlook 2010, clicking FILE > INFO reveals the following warnings in red:
    "Upgrade in Progress. Your mailbox is currently being optimized as part of upgrade to Outlook 2010. This one time process may take over 15 minutes and performance may be affected while the optimization is in progress."
    There's an "Upgrade Now" button but it fails to produce any visible result. Next to the button, another warning in red:
    "You must upgrade to the latest version of Outlook Hotmail Connector to continue using this e-mail account."
    Again, I do not have the Outlook Hotmail Connector installed. Nor have I recently upgraded to Outlook 2010.
    I am unable to access ANY account settings, as well as poll my various mailboxes.
    While reviewing the list of installed updates (Control Panel > Programs and Features > View Installed Updates), there are 28 approximate patches -
    specifically, Service Pack 2 (KB2687455) - that were recently applied to Microsoft Office Professional Plus 2010.
    Microsoft, what the #$%# is going on?
    I've read some related posts that suggest the core issue is other than what Outlook is reporting.  The posts recommend the following.  However, in my case, the below steps did not correct the
    issue.  In fact, the new profile would not allow me to view/manage the associated accounts or data files.
    (1) Remove your current Outlook Profile. No worries - this doesn't affect your mail data (.PST files):
    http://office.microsoft.com/en-au/outlook-help/remove-a-profile-HP010356455.aspx
    (2) Create a new Outlook Profile:
    http://office.microsoft.com/en-au/outlook-help/introduction-to-profiles-HA010355553.aspx
    Note: Outlook complained "An unknown error occurred, error code: 0x80040154."  However, exiting the Mail config window and relaunching shows that the new profile is intact.
    (3) If you previously had the Outlook Hotmail Connector installed, reinstall it.  If not, then just ignore and the warning should go away after creating a new Profile.
    32-bit connector: http://www.microsoft.com/download/en/details.aspx?id=24677

    I was able to resolve this issue as follows.  However, why it occurred is unknown at this time and
    unrelated to a corrupted Outlook Profile, as mentioned on my prior post.  It seems highly probable that it was caused by the recent batch of Microsoft Updates for this product which included Service Pack (SP) 2.
    1) Performed a "repair" of Outlook 2010, via the Control Panel > Programs and Features.
    2) Rebooted.
    3) Prior to launching Outlook, returned to Control Panel > Mail and configured the location of my PST file (not in default directory).
    4) Had to reestablish as off my mail accounts, settings/preferences/etc. This step was the most tedious and frustrating.

  • Cannot Connect to Port 26 - Cannot Send/Receive Mail

    I have Maverick on my MacBook Pro.
    All of a sudden, with NO CHANGES MADE to my system, my email no longer works. I cannot send or receive. I get the error:
    ===========
    The server “mail.mydomainnamel.com” cannot be contacted on the default ports.
    Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be sent.
    Sending from: [email protected]
    =============
    I use port 26 to send. Receiveing is mail.mydomain.com
    OSX recently updated. Could that of screwed up my settings or broke something?
    My internet proider says the issue is not on their end.
    Any help would be appreciate.
    Patrice

    Ok, I rechecked my router page by page and have found one solution .. .the https management page of the router defaults to 443 - so have changed that to 4443, rebooted router and can now access my http://mydomain/owa - so that is good.  However, still
    cannot telnet to port 25 on the exchange server from external.  The port forwarding is definitely correct for port 25.
    I have rechecked the receive connector:  MAIL FLOW -  RECEIVE CONNECTORS - DEFAULT FRONTEND SERVER
    and under security - anoymous users is checked.   That SHOULD let me connect yes?  But it does not.
    Where else does this need to be changed - can you advise?
    regards
    steve

  • Cannot send/receive mail locally for cronie [solved]

    I installed the heirloom-mailx package so cronie can send messages but I cannot send a test message to myself.
    % echo "test" | mailx -s "test message" mags
    /usr/sbin/sendmail: No such file or directory
    "/home/mags/dead.letter" 9/210
    . . . message not sent.
    So I installed ssmtp after searching but that does not work either.
    % echo "test" | mailx -s "test message" mags
    % send-mail: Cannot open wallflower:25
    My /etc/ssmtp/ssmtp.conf:
    # /etc/ssmtp.conf -- a config file for sSMTP sendmail.
    # The person who gets all mail for userids < 1000
    # Make this empty to disable rewriting.
    root=mags
    # The place where the mail goes. The actual machine name is required
    # no MX records are consulted. Commonly mailhosts are named mail.domain.com
    # The example will fit if you are in domain.com and you mailhub is so named.
    mailhub=wallflower
    # Where will the mail seem to come from?
    #rewriteDomain=y
    # The full hostname
    hostname=wallflower
    Thank you for any help you can provide.
    Last edited by maggie (2013-10-05 15:21:00)

    http://unix.stackexchange.com/questions … y-for-cron
    Edit: Tried https://aur.archlinux.org/packages/dma/ - works:
    $ ls -l /usr/bin/sendmail
    lrwxrwxrwx 1 root root 3 Oct 2 01:23 /usr/bin/sendmail -> dma
    $ echo "foo" | mailx -n -s "test" karol
    $ mail
    Heirloom Mail version 12.5 7/5/10. Type ? for help.
    "/var/spool/mail/karol": 1 message 1 new
    >N 1 karol@black Wed Oct 2 01:25 17/447 "test"
    Last edited by karol (2013-10-01 23:28:30)

  • Cannot send/receive mails anymore with BB9300

    Hi, since the last 2 weeks, mails do not arrive to nor leave anymore from BB 9300.
    When I try to change my mail address, I cannot access the server
    Error message is "your terminal encounters a problem when trying to connect to the application server"
    What should I do to fix the problem ?
    Thank you

    Hi and Welcome to the Community!
    With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Please wait for one "registration" message to arrive to your Messages app
    2) Delete and Resend Service Books (pre-BB10 devices only)
    KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
    If you have no CMIME entry, then skip the deletion
    KB02830 Send the service books for the BlackBerry Internet Service
    Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
    3) Reboot
    Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Trouble Sending & Receiving Mail Through Exchange Account from Lion Mail

    Mid-2011 MacBook Air, 1.7 GHz Intel Core i5, OS X 10.7.2.
    I'm having trouble sending and recieving mail through my Exchange Server Mail account under Lion 10.7.2 on my MacBook Air.  The MBA is new with a factory install of Lion.  On my MBP the server settings were as follows:
    Internal & External Server:  red001.mail.microsoftonline.com
    When I allow Mail to configure the server settings based on my company eMail ID & Password it sets it up as follows:
    Internal Server:  10.32.16.62
    External Server:  autodiscover-red001.mail.microsoftonline.com
    Part of the time this seems to work ok but frequently Mail cannot seem to connect to the Exchange Server to send/recieve.  The internet connection is fine and I can send/recieve from my iCloud mail account with no problems.
    I recently "upgraded" from mobileMe to iCloud, I do not seem to have any of these issues on my iPad2 or iPhone4, both of which are running iOS5.
    Anyone have any ideas?

    This started happening with me a week ago.   Don't know if it's connected to the latest update or not.  I'm running 10.6.7.  I can get Exchange mail (sometimes) on my iPhone 3GS, but it's stopped on my MBP and iPad2.  Neither can I log onto the company's web mail site from home ("can't reach server" error message). Weird and very frustrating.  IT guy at work says there is nothing wrong at his end.

  • Icloud won't let me buy more storage and I am full, cannot send/receive mail!

    I lost my icloud free storage today and cannot get mail.  Each time I try to buy an upgrade, I get an error that my credit card is incorrect, or that credit card processing isnt available.... I'm stuck!

    What happens when you try to delete old backups?

  • Since upgrading to IOS 8.1.2, I cannot send/receive emails from either of my Apple or Verizon email accounts.  Does anyone know how to fix this problem or how to go back to IOS 8.1.1?

    Since upgrading to IOS 8.1.2 on my iPad3, I cannot send/receive emails from either of my Apple or Verizon email accounts.  I confirmed that my internet connection is working. Does anyone know how to fix this problem or how to go back to IOS 8.1.1?

    Hi Milrclan,
    Thanks for contributing to the Apple Support Communities. 
    If you're not able to send or receive email from the mail accounts on your iPad after updating iOS, start with these troubleshooting tips:
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Best Regards,
    Jeremy 

  • I have 3 mail accounts in apple mail. One of them has had the spinning ball going for several days and I cannot receive mail in this account. I can receive mail in this account on my iPad and by signing into aol on safari. It's obviously a glitch in Apple

    I have 3 mail accounts in apple mail. One of them has had the spinning ball going for several days and I cannot receive mail in this account or delete messages etc. For some  reason, I CAN send mail on Apple mail using this account, although it takes several minutes. I can receive mail in this account on my iPad and by signing into aol on safari and internet explorer on my office PC. It's obviously a glitch in Apple's Mail. I've deleted this account and reopened it in Mail on my Mac Pro with no difference. Any suggestions would be greatly appreciated, this E amil account is major to my business.

    http://support.apple.com/kb/TS3276
    sounds like a corrupt database or index
    the glitch is your home folder and mail folder, esp look at syncservices
    I'd post in the mail or Lion forum where you will find similar issues being discussed.
    http://www.apple.com/support/mail

  • Can't send mail to POP Account which has attachment or signature

    Since installing the Update 10.4.6, I have been unable to send email to my pop account which has either a signature or an attachment (when there is no attachment or signature it works fine). I have cleared the caches using tiger cache cleaner. I have tried adding a new user account to mail. It doesn't work in Entourage either. I've reinstalled Mail. What else do you recommend?
    Prior to installing the update, mail worked great for over a year!
    Additional Information:
    Whenever I press the send icon, the mail message disappears, then in the activity viewer it gives the message “Delivering message / Sending data (28% done) and hangs there for a long time and finally gives the following message:
    Cannot send message using the server XXX
    Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings.
    Whenever I send an email with text and a signature, the activity viewer it gives the message “Delivering message / Sending data (100% done) and hangs there for an extremely long time and finally gives the same message.

    Mario_MM wrote:
    For sending mail the POP server is not important what you need to check are the settings of the SMTP server. Verify the settings of the SMTP server again and compare it to your settings on your iMac.
    Checked SMTP settings and they are identical to the working iMac. I had not changed any settings on my MBP when it stopped sending, plus it did work briefly last night with those settings, so I don't see how it could have anything to do with my settings being incorrect.
    The only thing even remotely different that I did prior to this happening was to use it away from home. I was out of town and used someone else's wifi to send some emails, but can't see how that should matter. It was the same ISP that I use at home, so I never even had to change settings for remote access. I never touched a thing, but when I got home I could no longer send emails.

  • Suddenly Cannot send e-mail through g-mail account

    I have had no problems with sending/receiving mail until suddenly 4 days ago - can receive, but cannot send e-mail through a g-mail account.  Do not know how to rectify, nor whom to reach out to...
    Any help would be greatly appreciated.

    Hello PBriestner,
    Thank you for using Apple Support Communities.
    The following article should be useful to you in troubleshooting email on your computer:
    OS X Mail: Troubleshooting sending and receiving email messages
    Regards,
    Jeff D. 

  • TS2755 since updating to ios7 I can receive e-mails, but cannot send e-mails from my phone

    since updating to ios7 I can receive e-mails but cannot send e-mails from my phone

    Hi there ritawilk,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    -Griff W. 

Maybe you are looking for

  • Report does not show updated data

    Hi, We are currently testing our AV implementation. AV server, agent and collectors are up, but the reports are not being updated. Reports are showing data as of Dec-22-2009, which is when the last time the unix servers (for both AV and source dbs) w

  • Report Execution Time

    I'm looking for a way to include the amount of time that a report took to create. I've looked at an option given in an existing thread: Re: How to calculate total time taken by a report but this method is extremely slow. I already have complaints abo

  • Tiger 10.4.2 Installation DVD Not Working

    I a few months ago I had to repair my startup disk (Error: Volume Header needs minor repair). I rebooted using the 10.4.2 Install DVD supplied with my ibook. I held down the C key during the restart and continued to hold it down. After about 30 secon

  • Printing sequence in 8.8

    Hi all, I am trying to understand and test the "printing seqs" on Report and Layout Manager for SBO 8.8. But I couldn't make it work. Anyone know how to use it? Thanks, David

  • Flash Player lags in Win 7 x64

    Hello, I'm having an issue with Flash Player on my new desktop computer because it chops up playback. I'm talking about getting 1 FPS in a Flash movie that a much older computer can easily play with 20 FPS. I use Windows 7 Ultimate x64, Flash Player