Cannot Setup email after changing BBID

Hi All,
As earlier said, BB Id answer and hint answer too forgotten. And later, New BB Id was created its and successfully allowing me to app world etc.
Now problem is EMAIL Setup not allowing me to log in to set up email account. Please help.
Subject Title edited to reflect new topic.

Earlier said?
Please answer this:  On your Manage Connections screen, click on the Services Status.
What is the status of the BlackBerry Internet Service?
Then for your email setup: 
Please try this FIRST, using your BlackBerry browser...
1)
• Go to mobile.blackberry.com OR to www.blackberry.com/integrate
• Scroll down to Communication and then to Email.
• Choose the appropriate email set up options.
If that works and completes your email setup/editing, good.
If not, follow these additional instructions:
2) Register HRT: (OS5) Home Screen > Options > Advanced Options > Host Routing Table > Scroll to any line entry and > press the Menu key > and then click Register Now. If you have an OS 6 or OS 7 device, Look at Options > Device > Advanced > Host Routing Table, etc.
3) Resend Service Books: Article ID: KB02830 How to send the service books for a BlackBerry Internet Service account. http://www.blackberry.com/btsc/KB02830
4) Then, with the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
5) Now, return to the 1) mobile.blackberry.com email setup as mentioned above and follow that.
Hopefully that will get things going again for you!
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Cannot get emails after changing to pop account

    Telstra, my internet provider, required me to change my email settings to a pop account. I had no choice in this matter.
    I am told that this will gradually happen to all users over the next 12 months....!
    BUT..... now  my ipad will not receive or send emails! 
    I copied over new settings from laptop to ipad as advised.  This did not work. 
    I then re--synced ipad to laptop....this did not work. I have since found 'online' that there is a problem with ipads
    and 'pop' accounts
    Further contact with Telstra informed me that  they are not responsible for other devices and
    I will have to pay to get this problem  fixed.  This is a $99 set rate!
    Can anyone help me to reconfigure my ipad to receive and send emails?

    Did you already try the Mail assistant for iPad?
    On thing to keep in mind:
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    What to ask if you're having issues sending, receiving, or configuring Mail
    iOS: Unable to send or receive Mail
    I have no problems using my POP Mail account on my iPad.
    If you have copied the settings from your computer, make sure that all passwords have been added again by you, they might have been removed for security reasons during copy process.
    I started from the scratch by adding a new account, to be sure all settings were correct.
    Some accounts don't work using SSL, in that case set it up without using SSL
    Message was edited by: Ingo2711

  • Cannot send email after update on iphone 5

    cannot send email from one account after update,  states my password and/or user name incorrect.  I have it written down,it's not incorrect.

    After the iOS 7 update, in order to send email from my iPhone5 and my daughters (also from our iPads) I had do follow Apples reset instructions. Hold the HOME buttton and the START/AWAKE button until your device restarts and you see the Apple logo when your device restarts. You do not have to swipe the message bar which shows up sometimes as your iPhone is shutting down. Sadly to say, but on my daughters iPhone 5, I had to do this 5 times.
    If you live near an Apple store, make them do it so that someone at Apple will send a fix for other people. I looked for a simple way to contact Apple and there is none. There is a series of prompts and links that are time consuming to be able to reach support about even a simple problem.

  • Is it possible to send email after changing an entry in table maintenance?

    Hello experts,
    I have a new requirement wherein I would send an email whenever changes are made to my z table. If os, how would I do it? Again, thank you guys for all your helpand take care!
    Message was edited by: viraylab

    Hi,
    Yes you can do it, you will have activate the events in the Table Maint. Generator and in the event you can write the code to send a mail.
    You can use EVENT 02 (After Saving to the DATABASE). You can see these in SE11 --> Table Maint
    Got Environment --> Maintenance --> Events and then you can introduce a New entry and write a Form which will fire according to the event.
    Regards,
    Ravi
    Note :Please mark the helpful answers

  • E72 - cannot setup email using WLAN

    Hi,
    I cannot setup any email account using a WLAN connection. It keeps directing me to the network connection. Is there a way around this? 

    I've faced the same problem and it is annoying!
    I couldn't set up my emails through my WLAN connection. I have always a WLAN access point(in home and in my campus). I don't need any GPRS(or say 3G) connection but just for that problem i purchased a weekly connection package. I checked the priority settings but I couldnt. Nokia should take an action about this
    My Nokia history:
    3110-3210-3310-3330-5210-6110-6210-6630-5510-1600-6330-E50-E55-2690-E72

  • Cannot setup email

    I'm new to using a blackberry, recieved a pre-used Pearl 9105. It seems as though its been "wiped" hence i cannot setup my email on it. I cant find the email setup icon anywhere?
    Although when I go tho Settings-Options-Applications-Core there are details of the applications properties? Does this suggest that it was once there?
    Please help? How can I restore email on the device?

    There should be an icon that says "Setup". In there is the option to set up Email. (I think it's the same on OS 5 and 6...)
    Alternatively you can go into your messages->menu->"Options"
    "Email Account Management"
    This is assuming that you have a viable data plan to send and receive emails...
    - Please Thank the person that helped you by giving them Kudos. Click the Kudos Button (beside the Reply Button) at the bottom of the post which helped you.
    - Please resolve your thread by marking the post "Solution?" which solved it for you!

  • ICloud still using old email after changing it to new?

    Last week I changed my email, and changed all of the necessary emails in my Apple ID account. However, when asked to sign onto iCloud, it's still asking for a password to my old email. How to I change my old email to new for my iCloud?
    Other useful information: My Apple ID is my NEW email address. Everything is my new email. I'm assuming my iCloud Apple ID email is different if it's still asking for my password for my old account?

    Yes it is possible to use migration assistant from an old mac to a new one to transfer user info although I would not recommend doing that. If it is at all possible I would recommend you do a fresh install on the new computer and move over only things you need (such as iTunes, iPhoto, whatever). Doing this will be a lot better because you will not also be moving the junk from your previous account that you don't want cluttering up the new one.
    What migration assistant does is copy the data from one computer onto another. Nothing is being removed from the old mac, it is just being copied.

  • Why does iPhone/Ipad still sync email after changing Exchange\Windows Server AD password !?

    Has anyone noticed this issue before? A user changes their office network password but it takes anywhere from 2 days to more than a week before the iPhone notices and prompts the user to enter their new password. But not only that, users can still access their e-mail account and send and receive e-mail with their old password.
    We are using MS Exchange 2010. Other phones like samsung galaxy and nokia e72 immidiatly prompt for a new password, after changing the password on the windows machines.
    Please help.
    Marc

    I would recommend as soon as you restore the iPad go in and delete the exchange account from your device.  It may have a cached entry causing the wipe command to continue to execute.  You may ultimately need to restore it without the backup and set the account up again.

  • Mail 3.0 cannot send email after clean install

    mail does not manage to send mail after leopard was installed via a clean install. It seems to work for upgraded machines, but unfortunately for me, I prefer the clean install.
    The problem is, that the SMTP-server simply rejects sending attempts from mail. mail then simply says "cannot send message using the server ...". I got suspicious when I entered a wrong password as then mail says that authentication failed (so the communication has to work somehow).
    So I worked on getting the server logs and they say the following:
    +Helo command rejected: need fully-qualified hostname; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<Core>+
    Seems like my computer send only the computers name as hostname and not the .local part any more. Systems which have been upgraded instead of a clean install do it "right" meaning they send hostname.local instead of just hostname which gets accepted by the smtp-server.
    So the question is, where is the problem here? I do not really know what would be the right behavior regrading the computers name and hostname but I realize that 10.5 differs here from 10.4 leading to the problem above. My workaround in the moment is using Thunderbird which is quite sad after buying and upgrading to the new system...

    I am running into the same issue. My insightbb account wont send messages. My yahoo account on the other hand, works fine. Heck, Mail wont even let me setup the insightbb account. Sometimes i can, but it rejects my username. I have to use thunderbird to send email from my insightbb account

  • HT4623 How can I send email after changing my AOL password on my iPad2?

    After I changed my AOL password due to the latest spoofing scam, I cannot send any emails from my iPad2. I have gone to settings and changed my email password. The latest attempt to resolve this to go to the advanced page and I clicked on sent and now sent is no longer working. I think I've just made matters worse for myself. I can go to the AOL app and both receive and send emails, but I want to send directly from my iPad mail feature. Help!

    in settings, mail, go through the setting for sending again.  you need to restate your password.  make sure the server name and port are correct.  It may be simpler to delete the account and start over - ( you mail is still on the aol server - it will not be lost)
    If you are not real sure of the settings, simply google aol mail settings, and you should get a clear answer.
    since you are receiving, you have the right password in place  - you just need to reconnect to the sending server.

  • Cannot open emails after reading 2 or 3

    Can someone tell me why after reading 2 or 3 emails I cannot open any more?? I'm running Win Vista??
    Many thanks

    Hello,
    Actually, I think this should be asked in the
    Microsoft Office Community Forums.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book: Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Cannot compile project after change to "any cpu" randomly

    Hi,
    in my VS 2013 i had changed the solution from x86 to "any cpu" in the debug-settings, the build-settings etc.
    Now sometimes i try to build it it gives the error "Generate ressource cannot be executed because
    it cannot connect to "CLR2" and Architecture "x86" - please make sure(1) runtime and architecture is avilable  and(2) the file
     "C:\Program Files (x86)\MSBuild\12.0\bin\MSBuildTaskHost.exe" exists
    I do not know why that is, it should compile in x64 since my os is 64 bit. The workaround is to delete the exe in my  debug-folder and then let the vs build it again.  
    Sometimes it can work for days after that workaround to build newer versions, then magically it breaks again.
    Looking at the .vbproj-file from another project that was "any cpu" from the start i learned that some  x86-stuff is still in my config of the project that has the issue.
    My question is now if you recommend to "just change it" or if just editing the file to look like that other project will not do it all.
    My vbproj-file from my project looks like this
    Microsoft Visual Studio Solution File, Format Version 12.00
    # Visual Studio Express 2013 for Windows Desktop
    VisualStudioVersion = 12.0.31101.0
    MinimumVisualStudioVersion = 10.0.40219.1
    Project("{F184B08F-C81C-45F6-A57F-5ABD9991F28F}") = "SAP-Toolbox", "SAP-Toolbox\SAP-Toolbox.vbproj", "{165D1482-8BEB-4247-98EA-0A4040331290}"
    EndProject
    Global
    GlobalSection(SolutionConfigurationPlatforms) = preSolution
    Debug|Any CPU = Debug|Any CPU
    Debug|x86 = Debug|x86
    Release|Any CPU = Release|Any CPU
    Release|x86 = Release|x86
    EndGlobalSection
    GlobalSection(ProjectConfigurationPlatforms) = postSolution
    {Guid}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
    {165D1482-8BEB-4247-98EA-0A4040331290}.Debug|Any CPU.Build.0 = Debug|Any CPU
    {165D1482-8BEB-4247-98EA-0A4040331290}.Debug|x86.ActiveCfg = Debug|x86
    {165D1482-8BEB-4247-98EA-0A4040331290}.Debug|x86.Build.0 = Debug|x86
    {165D1482-8BEB-4247-98EA-0A4040331290}.Release|Any CPU.ActiveCfg = Release|Any CPU
    {165D1482-8BEB-4247-98EA-0A4040331290}.Release|Any CPU.Build.0 = Release|Any CPU
    {165D1482-8BEB-4247-98EA-0A4040331290}.Release|x86.ActiveCfg = Release|x86
    {165D1482-8BEB-4247-98EA-0A4040331290}.Release|x86.Build.0 = Release|x86
    EndGlobalSection
    GlobalSection(SolutionProperties) = preSolution
    HideSolutionNode = FALSE
    EndGlobalSection
    EndGlobal
    cheers

    Hi mrsnipes,
    According to your description, I suggest you could try to close the VS and then re-open the VS2013, then clean build solution-> re-build your solution and then check if the project/solution can be built successfully.
    When I tried to change the solution platform to Any CPU, I found that it work fine. So to check if the issue occurs the specified project/solution or VS IDE, please try to create a simple new VB project in VS 2013 Express for Windows Desktop and
    then right-click your solution->Properties->Configuration properties->Configuration Manager->Change the Active solution platform to the Any CPU check this issue again.
    (1) If you still get same error, maybe you will need to repair or re-install the VS 2013 Express for Windows Desktop check this issue again.
    (2) If you did not get same error in a new project, I doubt that this issue maybe more related to your specified project, so please try to create a blank solution and then add the project into the blank solution.
    As you said the error message, I suggest you also refer the following article check if it can help you solve this issue.
    https://cyanbyfuchsia.wordpress.com/2014/06/11/could-not-run-the-generateresource-task-because-msbuild-could-not-create-or-connect-to-a-task-host-with-runtime-clr2-and-architecture-x86/
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Cannot get email after installing ios 7

    getting message   cannot connect to server
    this started after I install ios 7
    now emails coming in
    but can send outgoing

    Thanks,
    I tired it and it worked,
    Was at the Apple store yesterday and they thought they had fixed it.

  • Cannot setup email account

    Hi, I have had my Blackberry Torch for a while now. When I first got it I tried to setup the email account but for some reason my email address was already there, it said all I have to do is type in my password, so I did. But it keeps saying 'Sorry, unable to continue your session. Try again later'. How do I get my email to work? Or how do I delete the email completely and start again? Please help!

    Hi and Welcome to the Community!
    Inside of the same email configuration wizard, you can remove any account that is already there, and thereby start over clean.
    KB04620 How to delete an email account integrated with BlackBerry Internet Service
    KB02189 How to associate email addresses with the BlackBerry Internet Service account
    If you cannot do so via the on-device wizard, then try, from your BB Browser, this site:
    www.blackberry.com/integrate
    Further, from a PC/browser, you can access your BIS account (which is what this all is) if your carrier provides such an interface:
    http://www.blackberryfaq.com/index.php/Where_can_I_log_into_my_BIS_account%3F
    Last but not least, you can ring up your mobile service provider as they manage your BIS account for you.
    Hopefully something amidst that will work for you!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I cannot send emails since changing my iso.

    I have changed my ISP to BT and modem to the BT home hub 3. The error says apple mail cannot find the smtp server. Strangely if I log on to a BT hotspot the problem goes away, leading me to think it must be something to do with the home hub. I did try disabling the hub firewall but that did not help.Does anyone have any ideas?

    Hello ccrealty,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Log in to your email provider's website to ensure that the account is active and the password is correct.
    Restart your iOS device.
    Delete the affected email account from your device.
    Tap Settings > Mail, Contacts, Calendars.
    Choose the affected email account, then tap Delete Account.
    Add your account again.
    Best of luck,
    Mario

Maybe you are looking for