Cannot start imported Hyper-V VM: The Security ID structure is invalid (0x80070539).

I haven't seen any mention of this in any of the forums. I'm attempting to import a virtual machine to a Server 2012 R2 Hyper-V system. Normally this is fairly straight-forward. However, the imported virtual machine will not start. I'm getting the following
error message:
[Window Title]
Hyper-V Manager
[Main Instruction]
An error occurred while attempting to start the selected virtual machine(s).
[Content]
'Unnamed VM' could not initialize.
An attempt to read or update virtual machine configuration failed.
[Expanded Information]
'Unnamed VM' could not initialize. (Virtual machine ID )
'Unnamed VM' could not read or update virtual machine configuration: The security ID structure is invalid. (0x80070539). (Virtual machine ID 223C7883-08C2-43ED-B5D1-7ABFC0940F64)
I'm not familiar with what is going on here. Any ideas?
Thank you.

Hi michael,
please try execute this powershell command.
Grant-VmConnect Access -username (user account to boot the VM) -VmName (VM name).
See if this work. I just tested and work on my side. For more detail, you can refer to http://www.ms4u.info/2014/01/cannot-start-imported-hyper-v-vm.html
Lai (My blog:- http://www.ms4u.info)

Similar Messages

The BEx Analyzer cannot generate VBA code due to the security settings

Hello experts,
when I try to open a query in BEx Analyser I get this error message for each Item of the Query:
Diagnosis
The BEx Analyzer cannot generate VBA code due to the security settings.
System Response
VBA code is not generated.
Procedure
Choose Tools -> Macro -> Security.
On the Trusted Publishers tab page, select Trust access to Visual Basic project.
Choose OK.
Close the BEx Analyzer and continue working as before.
Access to Visual Basic project is only needed when generating VBA code.
This only takes place in design mode or when 3.x workbooks are upgraded.
Of course I did exactly what was recommanded in the "procedure-section" of this error message. But BEx ist still not working!
I use SAP NetWeaver 7.0 together with MS Excel 2007
Thanks
Axel

Hello experts,
I am an additional person interested in the way this issue was solved.
I confirm that the issue is coming from the SP2 of Microsoft Office (I have another environnement without the SP2 and everything works well), and I am in a situation where I can't remove the update.
Regards
Guillaume P.
EDIT :
Solution found : I applied the bi710sp10p_1001-10004472.exe patch
(downloaded via the download maanger : Support Packages and Patches - Entry by Application Group" SAP Frontend Components" BI ADDON FOR SAP GUI" BI 7.0 ADDON FOR SAP GUI 7.10)
Edited by: GUILLAUME PETIAUX on Apr 13, 2010 10:29 AM

Cannot start Services from CMC after the migration of BOBJ from C to E driv

Hi ,
We recently upgraded our BOBJ environment from BOE XI 3.1 FP1.6 on C drive to BOE XI 3.1 FP2.2 to E drive. The installation is completed successfully but all the services from CMC are stopped. I cannot start them and upon checking the properties, the path is still pointing to C drive even though the tomcat settings are pointing to E drive. Any help on this is greatly appreciated.
The error message is as follows:
The executable could not be launched. Possible reasons are insufficient RAM or disk space, or an invalid filepath or working directory. Actual reason: CreateProcess: "C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\wireportserver.exe" -JTCss 1024 -loggingPath E:/Logging/ -trace -fg -restart -name BUSOBJJF00.WebIntelligenceProcessingServer -pidfile "E:\Program Files\BusinessObjects Enterprise 12.0\serverpids\BUSOBJJF00_BUSOBJJF00.WebIntelligenceProcessingServer.pid" -ns BUSOBJ-JF00.ESC.win.colpal.com:6400 error=3
Thanks,
madhuri

I saw something similiar once when using SAP authentication(you didn't mention which auth model you are using).
If the license you installed was a named user (vs. concurrent user) and you picked the opposite setting in the CMC Authentication section, then you won't be able to login.

Forgot security questions and if i try to send the reset instructions, it sends it to an email address I'm not even aware of. i cannot download anything until i change the security questions

forgot security questions and if i try to send the reset instructions, it sends it to an email address I'm not even aware of. i cannot download anything until i change the security questions

this does not help. I have forgotten ALL of the answers to my security questions. I can NOT reset the answers to my security questions without answering two of the three security questions. The other way to reset the answers to these questions is for apple to send me an email on my rescue email addres which I DO NOT HAVE.

Skype and VLC cannot start, they keep bouncing on the dock

Skype and VLC cannot start in Mountain Lion. They just keep bouncing, they eventually stop bouncing but nothing shows up on the screen.
The CPU utilization goes to 100% and the computer starts overheating.
I found a way to start Skype and VLC from the command line:
/Applications/Skype.app/Contents/MacOS/Skype
/Applications/VLC.app/Contents/MacOS/VLC
The applications start successfully when the commands above are executed in the terminal.
Is there a reason why the applications do not work when started from the GUI? How can this be fixed?
Thanks

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). Post the lines of output (if any) that appear below what you just entered. You can do that by copying and pasting as well. Omit the final line ending in “$”. No typing is involved in this step.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time you'll be prompted for your login password, which you do have to type. It won't be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

How can I get my @mac email to work? when I try to reset password, i cannot access email for this and the security tells me I have wrong date of birth

Have used bilmac@mac email address for years last couple of weeks am getting message icloud needs password which it then rejects, when I try to reset password,they want email to verify i cannot access email and the security question is D. O B. it tells me I have wrong date of birth. so I am stumped, any ideas bilmac

COME ON PEOPLE. (WHY ARE THE LETTERS SO BIG HERE?) I AM VERY OLD AND JUST LIKE THINGS TO STAY THE SAME. I DID NOT, DO NOT, WANT ICLOUD TO DO ANYTHING I HAVE NOT USED IT AT ALL YET IT HAS MANAGED TO MESS UP MY EMAIL ADDRESS WHICH I HAVE BEEN USING FOR YEARS, IT ASKS FOR PASSWORD THEN REJECTS AND WHEN I TRY TO RESET WITH APPLE ID THEY ASK FOR SECURITY AS I CANNOT ACCESS THE EMAIL ADDRESS THEY HAVE FOR ME BECAUSE ICLOUD ASKS FOR PASSWORD, THEN APPLE TELL ME I DONT KNOW MY OWN DATE OF BIRTH, VERY CONFUSING

This device cannot start. (Code 10): is the message i get on my Pavilion Dv7-

There is a yellow tag on the Ads Instant HDTC PCI in the device manager. when I check the details I recieve this message:
This device cannot start. (Code 10)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
When I check fr solutions it says this device is installed properly.. Can anyone help?

Right click on it select uninstall >> clcik on Action > scan for hardware changes. >> drivers will be reinstalled >> restart the PC
if you have internet connection then right click on it and select update drivers.
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

I cannot start PSE 10 clicking on the icons.

I could not start PSE 10 clicking on the icons so I uninstalled it and reinstalled it. I started up once and then won't start again.

Hope you don't mind that I use your thread Chuck. If so, I apologise. Did it work out for you?
To everyone:
I received my copy of PSE10 this week, and have the same problem. My OS is Windows 7, 64bit Ultimate. I have tried all tips in the threads I found here, including what Ken wrote above, and uninstalling/re-installing, and nothing works.
Even if I go directly to the file PhotoshopElementsEditor.exe most of the time nothing visible happens at all. Not even any error messages. Sometimes I can open it once or twice, then I must I restart the computer.
Whenever the program refuses to open/start I have to "Control-Alt-Delete" to kill the Elements processes that won't close by themselves.
PhotoshopElementsOrganizer.exe I haven't been able to open even once.

Cannot start stopped servers, after restarting the SIA all stopped working

All was working ok, but suddenly I could not run reports from Infoview nor from the Central Managment Console. Nontheless, I was able to log in to both (just not run the reports). From the CMC, I noticed that 5 servers had stopped running, but remained enabled. I tried starting/restarting each of them from CMC, but had no response. I then looked at the properties for each of these servers and noticed the same message in red stating "The Server Intelligence Agent for this server is unavailable". I then went to the Central Configuration Manager at the server where Crystal Reports Server 2008 is installed and launched the Server Manager tool which showed a list of servers. From here, I looked at the Server Intelligence Agent properties and when I clicked on the configuration tab, it asked for me to select from a list of radio buttons of which connection type (if remember correctly) to use...there was no cancel or close option to back out of this, so I randomly chose the oracle type (which is what or ERP system uses as a backend), then was forced to save the changes. Nonetheless, this did not seem to have any effect then, I still had the same problem/issue stated above. I then, following a suggestion, restarted the Server Intelligence Agent. Unfortunately, right after this restart all the servers disappeared from the list of servers in the CCM. In addition, now I can't even login to any of the tools (CMC, Infoview,...) the only place I still can launch is the CCM; however, I cannot access the Server Manager tool in CMC. After entering my credentials, it idles for hours with no response). I'm stock with no way to do any further work...Any help would be greatly appreciated.
Edited by: lirizarry on Dec 3, 2009 6:31 PM
Edited by: lirizarry on Dec 3, 2009 6:37 PM

I saw something similiar once when using SAP authentication(you didn't mention which auth model you are using).
If the license you installed was a named user (vs. concurrent user) and you picked the opposite setting in the CMC Authentication section, then you won't be able to login.

Workspace cannot start process, puts it in the Draft folder

Hi!
My processes which i have used many times in workspace now cannot be started. Workspace puts them in the draft folder and doesn't do more. Please help!
Kind regards
Sedat,

Have you changed your form?
It looks like it can submit the form.
Are you using the process fields from Form Designer, or you're own submit button.
Jasmin

Cannot start mac mini coreduo after last security update

Hi,
after last security update mac mini cannot see anymore the new 7200 rpm hddisk which worked like a charm since that…
When try to boot now I see only a question mark folder…
I can fix permissions via dvd, I can see the mac mini disk if i connet via firewire to another mac,
but cannot boot from it…
tried a kind of tech tool test: it seems that I've got a huge amount of corrupted .plist files…
How could that happen?
does it mean that it's not an hardware issue?
should I reinstall snow?
help me please

tmma.a wrote:
I thought that erasing was formatting as well;
no, it's not. there is probably something wrong with the partition map of the drive which is why your mac firmware does not recognize it as a boot drive when you restart. simply erasing the drive won't fix it. reformatting might.
anyway I'm reinstalling now, if doesn't work will try reformatting too…

Cannot start WAS when disconnected from the network

Hi, I have recently installed NW2004s (Developer Workplace) on my laptop, 1.5 G RAM, Windows xp. The WAS will not start when I am disconnected from the network b/c it is looking for the
<host>
sapmnt
.... folder. I want to be able to run the WAS when disconnected from the network. I'd like to change this setting to point to the local usr/sap/... drive. I found the properties file in the bootstrap component where you can change it, but can't find it in the dispatcher or server. The logs are showing the following:
#1.5#000F1FCD2E4900000000001200001EA800040E5C5AD7E178#1141689730714#com.sap.engine.core.configuration##com.sap.engine.core.configuration#######Thread[Thread-1,5,main]##0#0#Error#1#/System/Server#Plain###Error occurred: Secure Store lib Dir does not exist
<host>
sapmnt
J2E
SYS
global
security
lib
engine
=======================================================
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred: Secure Store lib Dir does not exist
<host>
sapmnt
J2E
SYS
global
security
lib
engine
     at com.sap.engine.core.configuration.impl0.ConfigurationManagerImpl.initInternal(ConfigurationManagerImpl.java:138)
     at com.sap.engine.core.configuration.AbstractConfigurationManagerImpl.init(AbstractConfigurationManagerImpl.java:169)
     at com.sap.engine.core.Framework.loadSingleManager(Framework.java:476)
     at com.sap.engine.core.Framework.loadManagers(Framework.java:246)
     at com.sap.engine.core.Framework.start(Framework.java:180)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.boot.FrameThread.run(FrameThread.java:58)
     at java.lang.Thread.run(Thread.java:534)
Anybody know where this
<host>
sapmnt
... path is set?
Thanks in advance!!

Hi David,
did you try to run the WAS, using the Ms Loopback Adapter?
Regards
Gregor

Cannot start new project without quitting the app first, edited projects d

Hi all
I posted a similar problem earlier, and thought it was resolved, but now it's happening again and worse.
( I keep my imovies on an external drive, which has been fine before (maybe before snow leopard update?) )
Briefly:
I created an new event and imported clips.
I created a new project 1, edited but did not share.
Created project 2, edited. Quit imovie.
today, opened imovie: project 2 was active so I shared it.
Went to project pane: project 1 was empty. Recreated project 1 and shared it.
Created new project 3:.... project 1 would not leave the editing window so quit imovie.
Re-opened imovie:
Project pane: project 1 is empty, project 2 is empty, but shared indication is there. opened project 3 to edit and share.
new project 4: project 3 wouldn't leave the window to allow editing of 4.
Quit and deleted preferences (imovie8 plist as well as the iapps plist from my user/library/preferences). but no improvement: Now projects 1, 2, and 3 are empty (but shared)
What the heck is happening and how can I fix it? I'm tired of sharing and then quitting the app as the only way to work on a new project and am afraid that if i have a big project, and can't share the same day I start it, it will be gone when i reopen the app the next day!!

Well, as no one was able to offer a solution, i reinstalled the whole iLife 09 package. This at least allowed me to install the updates (which I couldn't do before).
A test movie creation works, without the edited work disappearing. I don't want to have to reinstall every time it happens, though, so I am keeping my fingers crossed that the problem is now solved.

HT201363 I have requested the email to help me with forgotten security questions several times over many days but I do not get the email; now I cannot use my account without knowing the security question answers?

I have repeatedly requested the email to help with forgotten security question passwords but never receive it; I cannot access my account for purchases with out the answers; how can i fix this?

Hello Jamped,
It sounds like you are doing the correct process to reset your security questions, but you are not getting the email at your recovery address. I recommend checking your spam folder first. If it is not there I would next reach out to
our iTunes Account Security team who may be able to help if you can verify your account info:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thank you for using Apple Support Communities.
All the very best,
Sterling

Cannot Start OATS Server After Restart the Machine

Hi, All
I installed the Linux OATS server on a virtual machine.After i restart the machine, always failed to restart OATS server.
I login the weblogic console to start the application of oats, failed. got error message
javax.naming.NameNotFoundException: Unable to resolve 'OATS_common_DS'. Resolved ''; remaining name 'OATS_common_DS'.
Check the log file:
Caused By: javax.persistence.PersistenceException: Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.1.3.v20110304-r9073): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [OATS_common_DS].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'OATS_common_DS'. Resolved ''; remaining name 'OATS_common_DS'
at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:417)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.getServerSession(EntityManagerFactoryImpl.java:164)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:221)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:209)
at weblogic.deployment.TransactionalEntityManagerProxyImpl.newPersistenceContext(TransactionalEntityManagerProxyImpl.java:65)
at weblogic.deployment.BasePersistenceContextProxyImpl.getPersistenceContext(BasePersistenceContextProxyImpl.java:170)
at weblogic.deployment.BasePersistenceContextProxyImpl.invoke(BasePersistenceContextProxyImpl.java:101)
at weblogic.deployment.TransactionalEntityManagerProxyImpl.invoke(TransactionalEntityManagerProxyImpl.java:77)
at weblogic.deployment.BasePersistenceContextProxyImpl.invoke(BasePersistenceContextProxyImpl.java:87)
at weblogic.deployment.TransactionalEntityManagerProxyImpl.invoke(TransactionalEntityManagerProxyImpl.java:18)
at $Proxy260.createNamedQuery(Unknown Source)
at oracle.oats.configuration.SettingsManagerBean.getApplication(SettingsManagerBean.java:388)
at oracle.oats.configuration.SettingsManagerBean.lookup(SettingsManagerBean.java:139)

No problem :-) Happy to hear that you fixed it.
BTW, there is a tool provided with OATS (Database Configuration Tool) allowing you to review/reconnect to the database. I didn't think about it at first but this is a good idea to try that one next one you (or someone else) faces the problem.
Database Configuration Tool: <oats_install>/bin/DbConfig.sh
Some other useful tools:
Create Support Package: <oats_install>/bin/oats_support.sh
OLT Agent Authentication Manager: <oats_install>/jdk/jre/bin/javaw -jar <oats_install>/agentmanager/AMAuthManager.jar
Restart OATS App Service: <oats_install>/bin/restartSvc.sh [OracleATSServer | OracleATSAgent]
Stop OATS App Service: <oats_install>/bin/stopSvc.sh [OracleATSServer | OracleATSAgent]
JB

Cannot start imported Hyper-V VM: The Security ID structure is invalid (0x80070539).

Similar Messages

Maybe you are looking for