Cannot start rc.sysinit help :(

I am not sure what I actually did here but I started up my computer last night and it said cannot start my rc.sysinit which from what I have read it what goes thru your initscripts which is a big deal.  I have tried to chroot into my system to run pacman -S initscripts but I get a cannot run /bin/bash and am not sure how to fix this.
I am a medium linux user which means I can figure a few things but this kind of stuff is over my head right now.
pink
Last edited by Mr Pink57 (2010-01-18 00:50:42)

Just tried that and I get this:
INIT: cannot execute "/etc/rc.sysinit"
INIT: Entering runlevel: 5
INIT: cannot execute "/etc/rc.multi"
INIT: cannot execute "/bin/sh"
(this part just repeats until it goes to)
INIT: Id "x" respawning too fast: disabled for 5 minutes
INIT: Id "c5" respawning too fast: disabled for 5 minutes
INIT: Id "c6" respawning too fast: disabled for 5 minutes
INIT: Id "c4" respawning too fast: disabled for 5 minutes
INIT: Id "c1" respawning too fast: disabled for 5 minutes
INIT: Id "c3" respawning too fast: disabled for 5 minutes
INIT: Id "c2" respawning too fast: disabled for 5 minutes
INIT: no more processes left in this runlevel
Hope this helps.
pink
Last edited by Mr Pink57 (2010-01-18 01:05:17)

Similar Messages

  • Sound Blaster PCI128 Device cannot start Code 10 HELP!!!

    Everything was working ok. I upgraded pc to lite hi speed and since then My soundblaster PCI28 is dead.system doesnt even see it installed. Cant bring up mixer panel or volume controls. In Device Mgr there was exclamation point so I updated drivers. This is on Win XP home. My speakers are ok as if I touch the connector plugging into sound blaster I hear a hum. When I go to use WMP0 I get the message...WMP cannot play the file because there is a problem with your sound device. There might not be a sound device installed on your computer, it might be in use by another program or might not be functioning properly. On device mgr I uninstalled just the line that had the exclamation point, but didnt uninstall the other items such as; AUDIO CODECS, LEGACY AUTO DRIVERS, LEGACY VIDEO CAPTURE DEVICES. MEDIA CONTROL DEVICES, UNI MODEM HALF DUPLEX AUDIO DEVICE, AND VIDEO CODECS. Do I need to click on each one and uninstall? Then reinstall the CD for the sound blasterThe Blaster is from Creative.
    The dri've update I downloaded were SBPCI28S. When I try to install the sound blaster program CD I immediate get an error msg that it did not find drivers and is aborting the install. Do I have a bad sound card?? Would appreciate any comments suggestions as to proper correct way to uninstall the existing sound card and reinstalling. Is using the CD enough or do I need to download drivers and from where. You can copy reply to [url=mailto:[email protected]">dave.mike@sympa tico.ca[/url] if you have questions let me know. Thanks heaps!!!

    Hi
    There is a possibility that the freeze also caused other problems in XP.  Try a repair first before going to the trouble of a full install.

  • Cannot start EPMA services :: Help needed

    Hi,
    We have installed EPMA 11.1.1.3 on a Windows 2003 Server VM with 2GB RAM and Weblogic 9.2 server. Database configuration and app deployment are successful but somehow the services wont start up.
    Checked the event viewer and it was pointing to Dimension server error. Here is the content from dimension_server.log .
    Please check and let me know if you can identify the root cause of this issue..
    [Engine Startup] Hyperion.DimensionServer.Program.LogMessage(:0) - An error occurred during initialization of engine ID 1: Object reference not set to an instance of an object..
    System.NullReferenceException: Object reference not set to an instance of an object.
    at Hyperion.DimensionServer.Library.Load()
    at Hyperion.DimensionServer.Global.Initialize(String jobManagerConnectString)
    at Hyperion.DimensionServer.Program.Main(String[] args)
    Thanks

    Yes, workspace agent is running fine. We have the hyperion 11.1.1.3 suite,except for EPMA & Fin Reporting print server, running on AIX 5.3 on a different server.., if that may lead you into something
    Thanks

  • Was just loading indesign and cannot start it. seem to have no rights for some presets. i deinstalled and installed new, same problem. help!

    was just loading indesign and cannot start it. seem to have no rights for some presets. i deinstalled and installed new, same problem. who can help?

    Not easy if vital information is missing. Sometimes it seems like people are using the internet the first time...
    What version of Indesign?
    What OS? "Rights" sounds like Windows
    What is happening when starting it?
    If Windows, where was it installed?
    If Windows, do you have admin permissions?

  • My CS6 photoshop started showing cannot perform function programming error then it started freezing please help?

    My CS6 photoshop started showing {cannot perform function programming error}
    then it started freezing please help?

    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • I cannot send some emails, I can reply but I cannot start an email, an error comes up in outbox stating 'does not allow relaying' please help?

    I cannot send some emails, I can reply but I cannot start an email, an error comes up in outbox stating 'does not allow relaying' please help?

    Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

  • HELP!!! My macbook pro cannot start up after dropping!!!

    I dropped my Macbook Pro 2.4 hardly to the ground on the right bottom days ago and it just cannot start up anymore now.
    I can hear the start up chime, but the screen is black and it shuts down automatically.
    I doubted it was because the hard drive dead, so I took out the hard drive and anticipated to see at least a folder with a question mark, but nothing - still black and powers off.
    HELP!!! Anybody has any idea?

    Contact Apple & make an appointment to have the computer repaired. Applecare does not cover accidental damage. If you want to diagnose & repair yourself - MacFixIt Tutorials
    Message was edited by: CMCSK

  • HELP!!! My macbook pro cannot start up!!!

    I dropped my Macbook Pro 2.4 hardly to the ground on the right bottom days ago and it just cannot start up anymore now.
    I can hear the start up chime, but the screen is black and it shuts down automatically.
    I doubted it was because the hard drive dead, so I took out the hard drive and anticipated to see at least a folder with a question mark, but nothing - still black and powers off.
    HELP!!! Anybody has any idea?

    Well unfortunitly it sounds like the fall damaged the laptop to the extent that it doesn't work. Your only option is to send it into apple (or an authorized apple repair) to be fixed. Since the laptop was damaged from a fall you warranty will not cover the repair.

  • Acrobat cannot start Adobe LifeCycle Designer! Help!

    Can someone help please?
    I downloaded a trial version of acrobat 9 pro LCD last week, it opened then, but not anymore. This is the message i get everytime i try to open it, "Acrobat cannot start Adobe LifeCycle Designer. You may need to repair or reinstall the application using the original installation program."
    MS SQL server 2009 was installed on my desktop this week, and from another discussion i read that this server and LCD dont get along with each other, and since LCD worked last week for me I am assuming installation of SQL server could be a possible reason why LCD wouldnt open now.
    My task is to create a dynamic form that should generate a report from just typing in one field, (for example, entering the name of an account holder should populate the remaining fields of the account holder's data as result.)
    has anyone done this so they can help troubleshoot??

    I wrote too soon. 
    So the form seems to be done and functional.  I just had to click cancel before going to Livecycle.  Then I save it and work on it in Acrobat.  I don't know why Livecycle isn't installed correctly, or honestly, what Livecycle does that Acrobat doesn't. 
    Anyway, problem resolved.

  • Please help me, cannot start I-tunes since Update 7,5

    Pleas Help me,
    cannot start I-tunes since Update 7.5. Informtion is, currant files are missing, i-tunes doesn´t start.
    Try to reinstal everything, and install i-Tunes with an old version from cd.
    Then information will be, cannot start becaus some parts from an newer Version.,
    so iám started updat to the new Version 7.5 and also i-tunes cannot started, because some current files are missing.
    Can anybody help me, i don´t now what to do now. I hade my new I-pod, because i have only problems, please help me to love it again.
    Ulrich

    ok I am no expert on PC's or itunes but I have had the same problems as a lot of you on here. Have a look at what the solutions are. You need to remove the itunes 7.5 program and the quicktime program as it is causing the problem. Uninstall may or may not work, manually deleting the programs will work but your regisry will still indicate it is installed. My advice is to install
    Windows Installer CleanUp Utility
    I am not sure how to make an active link to it so have a look through this forum, install it, run it, remove all traces of itunes and QT then install from the downloads section version 7.4.3 which was ok. Then dont update, not yet, let them get sorted first. I hope this helps, it did me after about 4 hours and the info was right there all the time.

  • Keep beeping, cannot start, after installing security update. Please help.

    I just apply the security update today in my MacBook (aluminum), but then the laptop cannot start.
    When starting, it beeps 3X, pauses, then beeps 3X, pauses, and so on - never stops.
    I press the power button to stop, but when pressing the power button back on, this keeps happening.
    Does somebody also have this kind of issue? What should I do?
    Sorry if I may have repeated other reports, I just cannot find here. I googled a bit and somebody tells that beeping 3X relates to graphics device problem. What should I do with this?
    Thanks

    Hi T,
    Yes, that is the key we all are getting while the announced shows the key first presented in the update released as 2010-001, back in January. Nothing else reported besides the SHA1 diff.
    I am sorry to tell you but this issue would hardly, if not ever, be related to the update. It seams to be the hardware fault in fact, test each memory in each slot, one at a time trying to boot the 4 times, 3 in the case, you are already up with this mem/slot combination.
    Good luck.

  • I cannot start my cs4 program I get error message 148:3  can someone please help

    I cannot start my cs4 program I get error message 148:3  can someone please help

    Which operating system are you using?
    If it's windows:
    Error "Licensing has stopped working" | Windows

  • Classic cannot start - help

    Hi have iMac G5 PowerPC 2.1ghz with 10.4.11
    Due to Word not starting forno reason went through all sorts of reinstalls of office etc.. anyway, ended up reinstalling the os 10.4.2 and spent ages updating to 10.4.11. Reinstalled Office and all works now.
    Bur classic is not. It say: Classic cannot start. There is a problem with saving preferences required to run Classic. So installed classic 9.2 from restore disc. Still same error.
    Have rebuilt permissions in disk utility & in system preferences/classic rebuilt desktop.
    In system preferences in classic - no system folder selected. Try to select system folder it then states - System Preferences failure - classic preferences is unable to save or read preferences. Classic cannot start.
    Help

    Working in another account but not yours means you have a file specific to your account that is not working, probably a preference .plist file. I notice I have one in my own user library folder in the ByHost folder called com.apple.Classic followed by a long number. You could try moving that to the desktop and see if that clears up the problem. Otherwise get hold of a copy of EasyFind and look for likely culprits specific to your user space (that's what I just did).

  • Audacious, skin problem. Cannot start.

    Hello.
    I just installed Audacious player, but I cannot start it. When I try to run the player, I get the following error message:
    Unable to load skin.
    Check that skin at '(null)' is usable and default scin is properly installed at '/usr/share/audacious/Skins/Default'.
    I have the default skin in /usr/share/audacious/Skins/Default directory. I do not know what the first part of the message means (Check that skin at '(null)' is usable...). Can someone give me a hand.
    I do not know what else information to post. If you need to know anything for my system, I will post the info. I have Arch GNU/Linux Core Dump, kernel: 2.6.24-ARCH. The system is installed as "Basic", I am using fluxbox ... If you need anything else ...
    Regards.

    OT: I'm sorry. I just couldn't help laughing at the subject, which makes perfect sense within the Linux context but which sounds truly bizarre otherwise.

  • Installation of Oracle 11g on RHEL 5 (Listener cannot start )

    Hello,
    I have install Oracle 11g on my linux RHEL5. The installation was succesfull but cannot start the listener. The configuration of even the EM at the end of the installation for the same reason , Listener not started.
    Trying to connect to my Listener i got the following error
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=karen)(PORT=1521)))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    Linux Error: 111: Connection refused
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCPS)(HOST=karen)(PORT=2484)))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    Linux Error: 111: Connection refused
    LSNRCTL> start
    Starting /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr: please wait...
    TNS-12537: TNS:connection closed
    TNS-12560: TNS:protocol adapter error
    TNS-00507: Connection closed
    Linux Error: 29: Illegal seek
    Can Some help troubleshoot this problem.
    Thanks

    Dear bezgodo!
    Please execute the following commands and compare the results.
    1.
    hostname --fqdn2.
    nslookup <your_ip_address>In both cases you should see the fully qualified hostname of your server.
    Yours sincerely
    Florian W.

Maybe you are looking for

  • Editing a field in ALV and validating the newly entered Value

    Hi Experts,    I have an ALV report in grid display (not object oriented). My requirement is to edit a field on the output and write the validations to validate the value that was edited on the ALV output. This can be done using object oriented codin

  • Battery draining very fast on MacBook Pro

    Just in the past month my battery has started to drain unusually fast.  It will go from 100% to less than 20% in 3 hours.  Most of the time the only programs I am using are Microsoft Word and Safari (thus, wi-fi), but even if I am not actively using

  • ITunes Match "Unknown" Error

         I wanted to upload some songs my match, but it wouldn't let me, so I found an article online telling me to delete my "apple.com" cookies then signed back into my account but it would constantly ask me to sign in, and it would't stop asking me to

  • Could not find the linked file

    I open a PDF to edit it in Adobe Illustrator and get several messages like this: Could not find the linked file "whatever.gif". Choose Repair to locate the missing file, Replace to select another file, or Ignore to leave the link unchanged. When I op

  • Error dashboard multipoint 2012 premium

    Hello I downloaded and installed the trial Multipoint 2012 I purchased the HP T200 zero client when I want to "Take Control" or "desktop project" (the Dashboard) for one or all users, I receive the following error message "The Take Control Failed act