Cannot start up iTunes after disc defragmentation

So yesterday I made a disc defragmentation on both my hard drives and now I cannot start up my iTunes. When I click on the iTunes icon it begins to install Itunes but stop and givs me a message saying" Cannot write to file
C:Program\ipod\bin\ipodService.Resources\fr.lproj\PodServiceLocalized.dll
Make sure you have access to the catalog".
If I want to uninstall my iTunes I get another error message with an error code 2330
I'm lost! I cannot start up my iTunes, I cannot uninstall it and I cannot reinstall. Can anyone please help me?

This error suggests a filing system problem or a file has been corrupted.
Try running a disk check.
How to perform disk error checking in Windows XP
http://support.microsoft.com/?kbid=315265
Try reinstalling iTunes after the check. If you get the same problem we will have to try something else.
Message was edited by: polydorus

Similar Messages

Sync session failed to start in iTunes after updated to iOS 7

Sync session failed to start in iTunes after updated to iOS 7

Restart your computer
While your computer is restarting, clear all of the applications from the background on your iPhone. You can do this by pushing the home button twice and swiping the programs off the screen by pushing them upwards.
After you are done doing that, restart your phone.
Wait about 10 seconds or so and turn your phone back on. By the time you get your phone back on your computer should be completly restarted and ready to go.
When your phone is back on, plug it into your computer. This should automatically bring up your Itunes, you may get another pop up that says autoplay, you can close that out. That's it. I hope it helps and good luck

Cannot connect to iTunes after iOS6 install

Cannot connect to iTunes after iOS6 install. Tried to reset date forward as others have suggested, has not worked. Any other idea's solutions out there?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Ts-l663b cd/dvd "device cannot start,code 10" after uppgrade from vista to windows 7 home

Compaq CQ60-216DX
Hi,I've upgraded from Vista to Windows 7 Home and now the CD drive is missing and displays an error code"10" DEVICE CANNOT START, under Device Manager.
Looked for updated drivers on HP Support,there are none for CD drive.
Cannot roll back driver,greyed out.
Used Restore to revert back 2 months and still no progress. Removed recently installed software from HP(C5280) printer as well.
Immediately after upgrade,CD drive worked fine. Even loaded music into iTunes.
I'm at a loss. Any ideas?
Thanks
Fabe
This question was solved.
View Solution.

Hi, Fabe:
Try running the MS automated fix-it tool for DVD's
http://support.microsoft.com/mats/cd_dvd_drive_problems/
Paul

I cannot connect to ITunes after updating to IOS 7.0.2,cannot update my apps nor download new apps. When I tap the quick test for IOS diagnostics it says it cannot verify the ticket number.

After updating to IOS 7.0.2 in my Ipad mini I cannot update my apps nor download new apps . It says "cannot connect to ITunes. " it's been almost 3 wks now. I have tried resetting it and trying other options like changing the DNS to just 8.8.8 etc but to no avail. I try to run the IOS diagnostics but it couldn't verify my ticket number. Everytime I open my mail it cannot identify server identity " Apple.imap.yahoo.com." But I just clicked "continue" anyway so I could get my mail.

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

I cannot connect to iTunes after new update on iPad air

I Cannot connect to iTunes or App Store after new update and I have tried all the trouble shooting stuff....no good. When I close the app the contents are there but when I tap on them the error message comes up and the app contents goes blank....Help. I need them for my business.
thanks

Hello Deryn340,
Thanks for using Apple Support Communities.
If you're currently unable to connect to either the iTunes Store or the App Store on your iPad, then I'd like you to please follow the troubleshooting steps outlined below.
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update(iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
If the steps above didn't resolve your issue, be sure that your specific alert isn't listed as a possible iTunes Store error. Then, if your issue is still unresolved, follow these steps.
Can't connect to the iTunes Store - Apple Support
Cheers,
Alex H.

Audigy 2 value "This device cannot start (code 10) after installation and no so

after installing this card I get a "This device cannot start (Code 0)" message in device manager. I disabled the onboard sound in the bios, installed using the CD and rebooted the computer. But still no sound. When using this method on another computer the installation went smoothly. Since it was still not installing on this computer I tried different PCI slots (keeping in mind that it is not suppose to be installed in the PCI slot adjacent to the AGP slot). I've tried everything I can think of and I still get a "This device cannot start (Code 0)" message under the driver in device manager and no sound whatsoever. Please help because if I can't get it to work I'll have to return it. Thank you.

I did manage to get mine working finally, it was pretty stupid of me....
Anyway I made sure the creative disk was in the dri've and then when my comptuer said "found new hardware" i pointed to the dri've and made it install the driver. Well that did work and it did say it installed the hardware, but it still didnt work. I then took it into my brother computer did it the exact same way and it worked fine. I finnaly brought it back to my PC and installed it one more time. it did the same exact thing. But this time i opened up the disk and installed the driver direct from the disk menu, after reboot it worked like a charm. Thought that was a tad strange, but it worked, maybe if someone makes the same mistake as me this will help.
Card is good, not much of a step up from my li've 5., but that card is going in a friends PC so its no biggie.

Cannot start the db after reboot machine

Hi,
Oracle DB: 10.2.0
OS: RHEL5
Successfully installed db and created the database.
but after reboot of machine I cannot start the database.
I have tried all the possible means( i deleted the listener and tns, recreated again rebooted etc etc)
oracle@med ~]$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Sep 5 13:48:10 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn /as sysdba
ERROR:
ORA-12162: TNS:net service name is incorrectly specified
SQL> conn sys/medisys@rmct as sysdba
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Thanking you,
regards,

risingstar wrote:
Hi,
Thanks for ur reply
plz have a look
[oracle@med ~]$ cd $ORACLE_HOME/dbs
[oracle@med dbs]$ ls
hc_rmct.dat init.ora initrmct.ora orapwrmct sqlnet.log
initdw.ora init.ora.84201013612 lkRMCT spfilermct.ora
regards,Well.You see that your sid is rmct not RMCT then
export ORACLE_SID=rmct
sqlplus "/as sysdba"
startup

Cannot start the db after reboot

Hi,
Oracle DB: 10.2.0
OS: RHEL5
Successfully installed db and created the database.
but after reboot of machine I cannot start the database.
I have tried all the possible means( i deleted the listener and tns, recreated again rebooted etc etc)
oracle@med ~]$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Sep 5 13:48:10 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn /as sysdba
ERROR:
ORA-12162: TNS:net service name is incorrectly specified
SQL> conn sys/pwd@rmct as sysdba
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Thanking you,
regards,

By definition your installation was not successful.
What network were you connected to when you installed the database?
After you rebooted are you still connected to the same network?
Has the IP Address changed?
How is "HOST" defined in your listener.ora tnsnames.ora files?
Oracle 10g dot anything is currently in desupport mode. It would be far better to install 11gR2 at this point in time.

Error "bp-e6c658d5-06a2-4965-ba02-f75652130626" I cannot start Firefox. After unninstal it and reinstall last version (22), all continue the same. Never can sta

I cannot start Firefox. Always start with an error. So, I cannot start it in secure mode...
Uninstalling and reinstalling it is not a solution. I have updated from version 21 to 22 without succés. version 19 is the same... So,my problema is not depending of the version (I have tried with 19 to 22 versions).
Error:
bp-e6c658d5-06a2-4965-ba02-f75652130626
bp-d7b43c8f-1bfe-416c-8e68-a0a412130626
bp-aa04f30c-f92c-4cd9-b3da-7ad082130625
bp-8f5942d7-a39b-41ea-9240-804452130606
.. and so on...

It doesn't seem to be there:
AdapterDeviceID: 0x1189
AdapterVendorID: 0x10de
AvailablePageFile: 15863291904
AvailablePhysicalMemory: 13335785472
AvailableVirtualMemory: 4006178816
BuildID: 20130618035212
CrashTime: 1372252584
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1372252584
Notes: AdapterVendorID: 0x10de, AdapterDeviceID: 0x1189, AdapterSubsysID: 35421458, AdapterDriverVersion: 9.18.13.1106
D2D? D2D+ DWrite? DWrite+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
StartupTime: 1372252584
SystemMemoryUsePercentage: 22
Throttleable: 1
TotalVirtualMemory: 4294836224
URL:
Vendor: Mozilla
Version: 22.0
Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 :
MSAFD Tcpip [UDP/IP] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IP] : 2 : 3 :
MSAFD Tcpip [TCP/IPv6] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IPv6] : 2 : 2 :
MSAFD Tcpip [RAW/IPv6] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
Proveedor de servicios RSVP TCPv6 : 2 : 1 :
Proveedor de servicios RSVP TCP : 2 : 1 : %SystemRoot%\system32\mswsock.dll
Proveedor de servicios RSVP UDPv6 : 2 : 2 :
Proveedor de servicios RSVP UDP : 2 : 2 : %SystemRoot%\system32\mswsock.dll
L'informe conté també informació tècnica de l'estat de l'aplicació quan va fallar.

"Office 2004 cannot start" error message after leopard install.

I have upgraded only 1 of my systems to Leopard. My notebook and Mac Mini are both running OS X 10.4.11. I purchased a Student and Teacher edition of Office 2004:Mac in June 2004 and have installed it on my iMac (now upgraded to OS X 10.5.1) as well as the other two systems. The Tiger systems can both be running Office without any problems, however, when I attempt to open any Office app. on my iMac I get the following message ... 'Microsoft Office 2004 cannot start because Microsoft Office is already in use. An office program is being used by (husband's name). Your installation exceeds ....blah blah'. I have checked the microsoft.public.mac.office newsgroup and it seems that where others experience this problem it is because they have duplicated one of their product id's. That is not the case with me. Each of my 3 versions of office has a different ID. I did an 'Erase and Install' when I installed Leopard so I did a fresh install of Office 2004 on my iMac. This install generated a different product ID from the original one (which I made a note of). However, I don't know how to change the product ID back to the original one or if, in fact, this is what is causing me to get the message.
Can anyone help me - this is driving me crazy??
Cheers
Tricia

FYI, the +product ID+ is different from the unique +CD key+, or serial number, (the long string of capital letters and numbers, separated by hyphens) which each installation requires. So the fact that the install, as you put it, "generated a different product ID from the original one," doesn't matter: it still sees the two installations as having the same serial number, and therefore not permitted.
Fortunately the answer is simple. First, uninstall Office 2004 completely from your iMac using the "Remove Office" tool you'll find in "Applications/Microsoft Office 2004/Additional Tools," then reinstall it, being sure to use a different CD key this time. Since you just bought the student and teacher edition, which comes with three licenses and three discrete CD keys, you should be all set!

Shalom. I cannot connect to iTunes after loading ios7 on my ipad 2

I installed iOS 7 and now there are 2x problems I have picked up.
1 ,I cannot connect to iTunes .the error I get is ..cannot connect to iTunes store.
2 , the pics in lock screen does not want to set on where I stretch them.
Any help please?
Thank you

Hello Deryn340,
Thanks for using Apple Support Communities.
If you're currently unable to connect to either the iTunes Store or the App Store on your iPad, then I'd like you to please follow the troubleshooting steps outlined below.
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update(iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
If the steps above didn't resolve your issue, be sure that your specific alert isn't listed as a possible iTunes Store error. Then, if your issue is still unresolved, follow these steps.
Can't connect to the iTunes Store - Apple Support
Cheers,
Alex H.

TS1368 Still cannot connect to iTunes after reading article

Even though I am allowing iTunes through my windows 7 firewall, I still cannot connect to the iTunes store. When I run the iTunes diagnostics it tells me that the firewall is blocking iTunes but that is not true. I am running the latest version of iTunes.
I have gone through every step of the instructions here dealing with this problem but nothing is working. Does anybody know how to get iTunes to work with Windows 7? I am using Microsoft Security Essentials as my antivirus program in case that helps.
David

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Cannot start stopped servers, after restarting the SIA all stopped working

All was working ok, but suddenly I could not run reports from Infoview nor from the Central Managment Console. Nontheless, I was able to log in to both (just not run the reports). From the CMC, I noticed that 5 servers had stopped running, but remained enabled. I tried starting/restarting each of them from CMC, but had no response. I then looked at the properties for each of these servers and noticed the same message in red stating "The Server Intelligence Agent for this server is unavailable". I then went to the Central Configuration Manager at the server where Crystal Reports Server 2008 is installed and launched the Server Manager tool which showed a list of servers. From here, I looked at the Server Intelligence Agent properties and when I clicked on the configuration tab, it asked for me to select from a list of radio buttons of which connection type (if remember correctly) to use...there was no cancel or close option to back out of this, so I randomly chose the oracle type (which is what or ERP system uses as a backend), then was forced to save the changes. Nonetheless, this did not seem to have any effect then, I still had the same problem/issue stated above. I then, following a suggestion, restarted the Server Intelligence Agent. Unfortunately, right after this restart all the servers disappeared from the list of servers in the CCM. In addition, now I can't even login to any of the tools (CMC, Infoview,...) the only place I still can launch is the CCM; however, I cannot access the Server Manager tool in CMC. After entering my credentials, it idles for hours with no response). I'm stock with no way to do any further work...Any help would be greatly appreciated.
Edited by: lirizarry on Dec 3, 2009 6:31 PM
Edited by: lirizarry on Dec 3, 2009 6:37 PM

I saw something similiar once when using SAP authentication(you didn't mention which auth model you are using).
If the license you installed was a named user (vs. concurrent user) and you picked the opposite setting in the CMC Authentication section, then you won't be able to login.

Cannot start Classic mode after 10.3.9 update

Hi!
I recently used the "Software Update" tool to update my 10.3 OS version to 10.3.9. After doing this, I found that I could no longer start Classic mode while in OSX. I did a clean install and can boot using OS 9.2.2, no problems. But I still cannot launch Classic while in OSX.
The exact error message is: "There is a problem with updating the Classic-specific files. Classic was unable to update its file in "System Folder" on "Macintosh HD".
I have a graphite G4 with 384 MB RAM and I'm still running a helluva lot of OS 9 software. Any suggestions?
Thanks for the help
Joe (designr66)
G4 Mac OS X (10.3.9)

Hi, Joe -
Welcome to Apple's Discussions.
Try removing the 'old' Classic-specific files from the OS 9 System Folder (you can do this while booted to either OS, although I suggest doing it while booted to OS 9).
These files include - Classic, Classic Support, and Classic Support UI (all usually located loose in the System Folder); Classic RAVE (in Extensions folder); and ProxyApp (someplace - location seems to vary).
Put those in the Trash and empty it, then restart into OSX and try designating the OS 9 System Folder as Classic via the Classic pane in OSX's System Preferences (in Apple menu).

Cannot start up iTunes after disc defragmentation

Similar Messages

Maybe you are looking for