Canon 30i footage not being read by sony HVR V1U
Hello out there,
So I have a whack of tapes to import, shot using the Canon XLH1- I'm not sure if they were recorded at 30F or 60i
However, I can't seem to find the correct 'tape format' on the HVR V1U to play them back.
Anyone run into this problem?
I wanted to bring in the footage using the Sony but I can't even play back the tapes.
Any suggestions?
Thanks so much,
Deedee
I believe the incompatibility between Canon and Sony may be a tracking issue and here's why. A couple of weeks ago I was able to capture HDV footage shot on a client's XL-H1, using my Sony HVR V1U. Last year that same client had unsuccessfully tried to capture using an HVR-M10U VTR. We wound up using the H1 to capture. Later in the year I borrowed his H1 to shoot some pickups in Standard Definition DV. When I tried to playback on my DSR-1500 there were picture and sound errors. The same tape played in a DSR-11 exhibited even more errors. I was able to playback and capture from on the H1 with no problems. I suggested that he send the H1 back to Canon for warranty repair. He did and the problem was in either the tape or head drum speed, I can't remember which. It seems quite reasonable that other H1's may exhibit the same recording issue. I suggest you try to record in DV and see if the V1U or some other DV deck will play it back.
Similar Messages
-
DV devise not being read by computer
I'm baffled by my issue.
Two cameras (Optura 20, DVX100) not being read by my eMac.
1 Sony cam reads fine.
Only recently, after 3 years of my Optura being used as a deck on my eMac, decides it doesn't want to communicate with my eMac, and another G5 tower.
-tried disconnecting all other fire wire and usb cords
-tried different fire wire cords
-tried logging in as a different user
-tried different inputs
I'm affriad there's a softwhere instalation i made on my comp that is interfearing with reading these DV devises.
I tried trashing previous Quick Time pkg files in my Library/Recipts...nothing.
Even my System Profiler has a hard time trying to read the signal when my cameras are plugged in. It won't even read an external HD if the camera is plugged in.
If there are any other suggestions out there...
I'M STUMPPED!!
Once I figured it was a software issue, the same issue occured when I tried plugging into a different G5 tower.
I'm trying to think if settings on the cameras are blocking/causing the issue. Still can't make sense of it all.
Do you keep "DV Out" off or on?
Thank you KINDLY in advance.
Regards,
Crzy K.Opening a new thread with the same problem ussually don't help to get an answer!
http://discussions.apple.com/message.jspa?messageID=3288963#3288963 -
Ipod not being read and freezing
When I plug my ipod into my computer, it goes to "do not disconnect" but not the flashing do not disconnect. Its frozen. My computer wont read it. So I unplug it and its frozen. I know how to restart it but that doesnt help me from when it freezes again once I hook it up. How do I stop it from freezing and not being read. Thanks
i am having a similar problem with my 4g 20G
it freezes when i try to update. i thought maybe it was the latest version of itunes i recently installed but i reverted back to an old updater version and itunes 6 and while i was able to get 300 songs on the ipod without freezing, when i tried to put the rest of my library on there it freezes. i've even tried to put as little as 15 songs on at a time and that still freezes the ipod.
i have a mac powerbook with macos 10.2 -
XML file not being read by Accordion Demo
I had this working last week and it was a beautiful thing. I
subsequently added many more product items to the products.xml file
and resent it, now the products.xml file is not being read by the
index page. I have read all the posts and added all the suggested
fixes -
added {useCache: false} to result in var dsProductFeatures =
new Spry.Data.XMLDataSet("products.xml", "products/product[name =
'{dsProducts::name}']/features/feature",{useCache: false})
added <cfheader name="Cache-Control" value= "no-cache">
<cfheader name="Expires" value="0">
<cfheader name="Pragma" value="no-cache"> to header
added var d = new Date();
var cToday = d.getSeconds();
var spryURL = "
http://localhost:8500/SpryMe/Sample1/employees.xml?cacheBuster="
+ cToday; to header
but my xml file is not being read. The script is running
because the little fields on the right are moving.
Any suggestions would be greatly appreciated!Hi,
What's happening if you open the xml page (employees.xml)
directly in browser. Are you able to see all the records? Is the
XML valid?
Regards,
Dragos.
PS: do you have a public URL where we can see that? -
Check box in a table not being read on auto read by JAWS(Screen Reader)
Hi Experts,
I am working on Accessible pages in ADF. Check box in table is not being read on "Auto Read" function by jaws. Auto read is a function that allows the user to start the screen reader at the top of the page and read the entire thing that is provided by JAWS. I have even specified label property for af:selectBooleanCheckbox. Can anyone help me regarding this issue.
Regards,
Santosh.
Edited by: 930871 on Jun 13, 2012 6:54 AM
Edited by: 930871 on Jun 13, 2012 7:25 AMCan anyone help me on this issue. This is really urgent.
-
I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?
Hey Stan1958,
Thanks for the question. I understand you are experiencing issues with your iPod nano and iTunes. Based on your symptoms, you may find the following resources helpful in resolving this issue:
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Thanks,
Matt M. -
My 3rd gen iPod nano is not being read by my iTunes on my mac. When going to sync, the mac screen says "no name". Also I believe I lost all the music on the iPod. When turned on it says "Welcome" as if it is new. I tried to copy all my music into the "no name" folder and then sync. The iPod said it was "syncing".
So does iTunes see the iPod or not? I couldn't quite understand from your post as you said it wasn't, but then said that the iPod was syncing...
B-rock -
My Ipod touch is not being read by Itunes?
I get this message about and Iphone (not being read) but my ipod touch just being read. It's a 32GB model.
It was reading the first few times, and then it stopped all of a sudden.
I also attempted to follow the instructions for getting help (No luck, uninstalling the Itunes resteting the Ipod, nothing seems to be 'working'.Did you follow the instructions here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Have you tried another computer for troubleshooting purposes? -
Video Ipod not being read by CPU(Need Help other post did not help)
My 30G Ipod is not being read by the coumputer, I tunes, or even the Ipod restore software. When i plug in my pod it turns on and charges...i can play music. When i turn it off there is a battery symbol and it says charging...i reinstaled ipod software...i did the two button reset, i tried it on all four of mr PC's Oh yeah...it make a soft high pitch noise when it charges.
I can't help I'm afraid! I have exaclty the same unresolved problem and getting severely miffed that a £300 product has suddenly became a heap of junk.
See it on ebay soon! -
My iPod is not being read by iTunes. What do I do to be able to sync my iPod if iTunes is not starting the setup wizard for the iPod when it is connected to a Dell PC? I am new the iTunes and iPods.
Hello, BAHannebaum.
The article below should resolve any device not being recognized in iTunes issue that you are experiencing. The most common issues are the Apple Mobile Device Support driver or iTunes is outdated. Start with the first step and test the results after each step processed.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H. -
Does any one have a solution to a blank disk not being read and unresponive to the eject button?
does any one have a solution to a blank disk not being read and unresponive to the eject button?
Apple Portables: Troubleshooting the slot load optical disc drive
Cures for an uncooperative CD/DVD drive
The Stuck CD/DVD Thread -
Revision: 1978
Author: [email protected]
Date: 2008-06-06 08:05:34 -0700 (Fri, 06 Jun 2008)
Log Message:
Bug: vendors.properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly.
QA: Yes - we need automated tests to make sure that errors.properties and vendors.properties in BlazeDS/LCDS are loaded properly.
Doc: No
Modified Paths:
blazeds/branches/3.0.x/modules/common/src/java/flex/messaging/util/PropertyStringResource Loader.java
blazeds/branches/3.0.x/modules/opt/src/jrun/flex/messaging/security/JRunLoginCommand.java
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. javaI have a lot of grief with this version of Windows Media Player.
It is very buggy and frustrating to use.
I have my Music library on a QNAP NAS, which is as reliable as they come.
System notifications make it not save changes. It also does not do a good job of interpreting albums and artists from folders. Changes to track names are not saved, nor are tracks moved to other albums, renamed albums, changes to genre, artist
or date. It separates and merges albums/tracks without sense or reason. Some changes I've made up to 4 times, then closed WMP and re-started my machine to check if it has/hasn't saved the changes. Often it has not.
This is the first time I've used WMP in this capacity, and I do not recommend it.
New service pack please. -
I just updated my iPhone 5 from virgin mobile to ios7, and upon the normal setup i find that i my sim card is not being read; apparently now it isn't supported. please someone help me.
my iphone is and has been locked to one carrier. all i've done is a software update to ios7, like all the other updates since i bought the phone when it was released. same carrier, same sim card. :/
-
When plugging in an iPad in Apple Configurator, it is not being read under USB Connected so I can't update it. The iPhoto window opens up and reads the photos on the iPad, so it is connecting to the computer. Earlier today I wasn't having any problems. I have shut down the iPad and the computer and started over, but that didn't help. Any ideas on how to get the system to read the iPad so I can update the apps on it?
Hi, is the problem just to update your apps on your iPad? Here is what you should check. Is the iTunes on your computer updated to the latest version? Does your iPad needs to be updated? Do you have enough storage on your iPad to do the update? On your device is your iCloud back up checked?
Go to Settings - iCloud - Backup/Storage - see if its checked, and try unchecking it before connecting it to the computer.
Please let me know if you need any further assistance. -
my iphone 5 is disabled and is not being read by itunes, itunes is giving me a prompt of my passcode, but that screen is not showing, please help me able my iphone.
+Do a DFU recovery:+
+1. Open iTunes.+
+2. Connect the iPhone+
+3 Press both the home and sleep/wake buttons until the Apple icon appears (ignore the red slider if it shows).+
+4. Continue pressing the home button alone until iTunes sees your phone in recovery mode.+
+5. Follow the prompts to restore the iPhone.+
If not, take it down to mobile dealers that can reset your phone for you. All data will be lost.
Maybe you are looking for
-
Errors in weekly data collection
Hello, I am running ecc6 sp 15 on AIX 5.3 and oracle 10.2.0.2 when i goto transaction st03 -> workload -> <instance_name> ->week dir - when i try to open one of the logs i get the following error message on the botton of the screen - "unknown period
-
Frequency response requirements for headphones with CMSS on XFi ???
Hi, I would like to know if someone could tell me what kind of heaphones are suitable for the CMSS mode with the XFi. I mean between : flat response/free-field correction/diffuse-field correction. Applying HRTF filtering should mean that headphones w
-
When selecting "Rotate Pages" from the "Document" drop down menu Acrobat 8 Professional 8.1.2 crashes. Every time, no error mesage. Have run "Repair Acrobat Installation" with no success. Any suggestions? Thanks.
-
Nokia E71, No boot after Up-date
I have updated my Nokia E71 and right after I realized my phone was actually switched off eventhough the software update was successful (I had the screen on my PC so I guess it went to the end). And since, the phone doesn't want to turn on (when I tu
-
24 inch Imac Problems and Questions
Hello, I have been using my new imac 24 inch for a few days. There is a constant noise whenever the computer is put in energy save mode. In other words, if u don't touch the computer for a few minutes, the brightness will dim, and there will be a noi