Errors in weekly data collection

Hello,
I am running ecc6 sp 15 on AIX 5.3 and oracle 10.2.0.2
when i goto transaction st03 -> workload -> <instance_name> ->week dir - when i try to open one of the logs i get the following error message
on the botton of the screen - "unknown period type (W).
when i try to watch a daily log it is displayed without a problem.
moreover when i push on the change user mode button (expert mode or
service engineer options) and move to service engineer, i try to
calculate both in background and in dialog i get the same error
message - unknown period type (W).when i press again on the user mode
button (expert mode or service engineer options) i get a dump -
DYNPRO_NOT_FOUND - dynpro does not exist, the current abap progrem
SAPWL_ST03N HAD TO BE TERMINATED.
the saposcol is running, the background job -
SAP_COLLECTOR_FOR_PERFMONITOR is running and working (daily data is
collected and displayed correctly)
each week i get an early watch alert report but with errors in data
collection section with the following exception -
SAPWL_WORKLOAD_GET_SUMMERY_I_W - NO_DATA_FOUND.
please advise asap
Regards,
Moshe

done - had to import note 1014116

Similar Messages

Campus Manager No Data Collected from Network

Just intergraged CiscoWorks with ACS. Now when we select Campus Manager | Visualization | Topology Services we get the following error message:
No Data Collected from Network
1.Devices are not availiable from DCR or
2.You have not performed data collection at least once
When we look at Common Services | Devices and Credentials | Device Discovery the total devices discovered and the devices reachable indicate there are devices that were found.
We could see devices fine before the ACS intergration but now, we cannot see any devices.
Any thoughts?

The devices (original clients) that I defined are as follows:
10.0.1.*
10.0.10.*
10.0.2.*
I was able to see these clients. Deleted the above clients from ACS and added:
10.0.1-10.*
So that I can see the above clients and others (10.0.3.*, 10.0.4.*,etc).
I can still see the original clients only. The others show up in Devices not configured in ACS report.
What do I need to do? What did I miss?

Data Collection Set 'Server Activity' Failure Waiting on a kernel object(s) failed. Inner Error ------------------ The handle is invalid.

All of the system data collection sets have been running for 6+ months without any issues, couple of weeks ago the 'Server Activity' collection set failed to restart after a planned maintenance server reboot.
When attempting to manually start the collection set it indicates "success", but after refreshing the collection set it showing as stopped. Viewing the logs for the Data Collection (Server Activity) I am getting the message:
Waiting on a kernel object(s) failed. Inner Error ------------------>
The handle is invalid.
After some research into this really unhelpful message I came across one posting where this error has been found to occur in SP1. We are running SP2 which include the fix so this shouldn't be the problem (ref http://connect.microsoft.com/SQLServer/feedback/details/585210/sql-server-2008-data-collection-execmasterpackage-timeout).
To see more detail on the root cause of the error I enabled the additional tracing for data collection (http://blogs.msdn.com/b/sqlagent/archive/2011/07/13/enabling-additional-tracing-for-data-collector.aspx). This provided an exception stack which indicated
that the issue was thrown to what looks like an existing file, referring to a location (e:\) which doesn't exist in our system.
DCEXEC!26d0!1b88!2012/11/28!11:17:25::    wmain _IN
DCEXEC!26d0!1b88!2012/11/28!11:17:25::    Command line: dcexec -c -s 2 -i "S160OLTP\OLTP" -m 0 -e 0x09C1635DD4C4C6478A145D679AFE718F_1_STOP
DCEXEC!26d0!1b88!2012/11/28!11:17:25::     Application::Init _IN
DCEXEC!26d0!1b88!2012/11/28!11:17:25::     Console code page (m_codePage): 437
DCEXEC!26d0!1b88!2012/11/28!11:17:25::      Application::ParseCommandLine _IN
DCEXEC!26d0!1b88!2012/11/28!11:17:25::      Application::ParseCommandLine _OUT:00000000
DCEXEC!26d0!1b88!2012/11/28!11:17:25::     Application::Init _OUT:00000000
DCEXEC!26d0!1b88!2012/11/28!11:17:25::     Application::Main _IN
DCEXEC!26d0!1b88!2012/11/28!11:17:25::     Started continuous mode collection on thread 12036
DCEXEC!26d0!2f04!2012/11/28!11:17:25::      StartCachedCollectionWrapper _IN
DCEXEC!26d0!1b88!2012/11/28!11:17:25::      Waiting for collection to exit or stop event to be signaled
DataCollectorController!26d0!2f04!2012/11/28!11:17:25::       StartCollection _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25::       StartCollection(iSetId = 2, iCollectionMode = 0, pwszInstanceName = S160OLTP\OLTP)
DataCollectorController!26d0!2f04!2012/11/28!11:17:25::        CDataCollectorController::ExecuteCollectionSet _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25::        SQL Instance Name: OLTP
DataCollectorController!26d0!2f04!2012/11/28!11:17:25::         CDataCollectorController::TryExecuteCollectionSetOnce _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25::          CDataCollectorController::Initialize _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25::          CDataCollectorController::Initialize _OUT:00000000
DataCollectorController!26d0!2f04!2012/11/28!11:17:25::          CDataCollectorController::PopulateCollectorPackageParameters _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25::          CacheWindow=1, CacheDirectory='I:\MSSQL10.OLTP\MSSQL\dccache'
DataCollectorController!26d0!2f04!2012/11/28!11:17:25::          CDataCollectorController::PopulateCollectorPackageParameters _OUT:00000000
DataCollectorController!26d0!2f04!2012/11/28!11:17:25::          CDataCollectorController::PopulateSetPackageParameters _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25::          CollectionSetUID='{49268954-4FD4-4EB6-AA04-CD59D9BB5714}', ExecutionMode=0, IsSystem=-1, LoggingLevel=0, DaysUntilExpiration=14, ExitEventName=''
DataCollectorController!26d0!2f04!2012/11/28!11:17:25::          CDataCollectorController::PopulateSetPackageParameters _OUT:00000000
DataCollectorController!26d0!2f04!2012/11/28!11:17:25::          CreateControlEvents _IN
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: e        ERROR: Win32 Error: GetLastError=183, retCode=0x4, function CDataCollectorController::CreateControlEvents, line 470, file e:\sql10_katmai_t\sql\mpu\shared\dc\runtime\controller\src\datacollectorcontroller.cpp
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: e        ERROR: Failed to create kernel event for collection set: {49268954-4FD4-4EB6-AA04-CD59D9BB5714}. Inner Error ------------------>
Cannot create a file when that file already exists.
DataCollectorController!26d0!2f04!2012/11/28!11:17:25::          CreateControlEvents _OUT:00000000
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: e       ERROR: DC_FAILED: function CDataCollectorController::TryExecuteCollectionSetOnce, line 350, file e:\sql10_katmai_t\sql\mpu\shared\dc\runtime\controller\src\datacollectorcontroller.cpp
DataCollectorController!26d0!2f04!2012/11/28!11:17:25::         CDataCollectorController::TryExecuteCollectionSetOnce _OUT:0x000004
DataCollectorController!26d0!2f04!2012/11/28!11:17:25::        Collection set execution failed, retrying in 5 seconds...
DataCollectorController!26d0!2f04!2012/11/28!11:17:25::        Waiting for exit event or retry timer failed.
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: e      ERROR: Win32 Error: GetLastError=6, retCode=0x4, function CDataCollectorController::ExecuteCollectionSet, line 278, file e:\sql10_katmai_t\sql\mpu\shared\dc\runtime\controller\src\datacollectorcontroller.cpp
DataCollectorController!26d0!2f04!2012/11/28!11:17:25:: e      ERROR: Waiting on a kernel object(s) failed. Inner Error ------------------>
The handle is invalid.
DataCollectorController!26d0!2f04!2012/11/28!11:17:25::        CDataCollectorController::ExecuteCollectionSet _OUT:0x000004
DataCollectorController!26d0!2f04!2012/11/28!11:17:25::       StartCollection _OUT:00000000
DCEXEC!26d0!2f04!2012/11/28!11:17:25::      StartCachedCollectionWrapper _OUT:0x000004
DCEXEC!26d0!1b88!2012/11/28!11:17:25::     Collection thread returned (00000001)
DCEXEC!26d0!1b88!2012/11/28!11:17:25::     Waiting for collection thread to exit
DCEXEC!26d0!1b88!2012/11/28!11:17:25::     Collection thread signaled
DCEXEC!26d0!1b88!2012/11/28!11:17:25::     Application::Main _OUT
DCEXEC!26d0!1b88!2012/11/28!11:17:25::    wmain _OUT:0x000004
I am now stumped as I haven't found anyone else experiencing this issue.
Any ideas, please help??

Thanks for the pointer Eileen, problem solved.
Can't believe I missed it, but after reading the last section on system hangs it occurred to me that I hadn't checked that all dcexec.exe processes were killed when I disable the data collection service.
For anyone else experiencing this issue I identified the dcexec.exe processes using the following in cmd line:
TASKLIST /SVC /FI "IMAGENAME EQ DCEXEC.EXE"
On the default setup of the data collection there should be two dcexec.exe processes constantly running, one for "Server Activity" and another for "Query Statistics". On our server there were five running with the data collection disabled.
After killing all of the processes and restarting the data collection problem solved!!
Still need to understand why the processes didn't shut down cleanly when the server was restarted, but at least I know where to look now.

Standard Data Collection Failing with Error ORA-04054: database link does not exist.

Hi Gurus,
When I am running Standard Data Collection in ASCP(APS) instance R12.1.3, its failing with error : ORA-04054: database link does not exist.
There is no such Database link exits which is showing in above error.
Also the database link name in the above error is not profile values in the database.
I think, concurrent might be fetching this database link name from some tables related to plan.
I am not having much knowledge about how this ASCP/APS works.
Need your help to resolve this issue.
Thanks,

Hi,
ASCP Collections looks at the dblink from instances definitions from.
1. Responsibility: Advanced Planning Administrator
2. Navigation: Admin > Instances
You may review the note in support.oracle.com - Understanding DB Links Setup for APS Applications - ASCP and ATP Functionality (Doc ID 813231.1)

Data Collection task error (Item is not defined in Cons Chart of Accts 01)

Dear Experts,
While executing Data collection task, I am getting error "Item is not defined in Cons Chart of Accts 01", What could be the reason?
(Many Items are getting collected in target, but at the topline this error is been shown)
Regards
Ritesh M

Thans Dan,
I have gone in the program UGMDSYNC, and getting few Gls which have not assigned Cons Chart of account.
Kindly tell me how to assign chart of account to these GL account?

Errors in Data Collection

Hi All,
I have 2 Exceptions in the Early Watch Report under Service Preparation Section which are :
Errors in Data Collection
Function Name -
Exception
DB6_TABLE_MAX_GROWTH_NEW -
NO_HISTORY_FOUND
DB6_TABLE_MAX_SIZE_NEW----
NO_HISTORY_FOUND
I don't know the reason for these exceptions
does anyone know the reason for these exceptions and their solution?
Thanks in Advance for your help
Regard,
Nadia Hamdy

Hi Warren Wong,
The Background Job "REORGCK_ALL" finished with errors
Below is the Job Log:
Job started
Step 001 started (program RSDBAJOB, variant &0000000000002, user ID BCADMIN)
Reorgck_All:REORGCHK for all Tables
Reorgck_All:started by CL_DB6_JOB_REORGCHK on server ENPO-D-RD1
Reorgck_All:Parameter TESTMODE has not been set
Reorgck_All:Parameter PARALLELISM has not been set
Reorgck_All:Parameter RUNTIME has been set to " 0"
Reorgck_All:Parameter COMPRESSION_CHECK has been set to ""
Reorgck_All:Setting VOLATILE flag according to DBSTATC
Object : Method call GET_SNAPSHOT failed with return code = ADBC error
Reorgck_All:REORGCHK failed
REASON=ADBC error
Exception CX_DB6_CON in program CL_DB6_JOB_REORGCHK===========CP / CL_DB6_JOB_REORGCHK===========CM005 at line ADBC error with return code = 1,208
Reorgck_All:Exception CX_DBA_JOB in class CL_DB6_JOB_REORGCHK
Reorgck_All: Kernel Error ID:
Reorgck_All:SYSID:
Reorgck_All: SY-SUBRC: 1208
Reorgck_All: SY-TABIX: 0
Reorgck_All: Message: ADBC error
Reorgck_All: Database:
Exception CX_DBA_JOB in class CL_DB6_JOB_REORGCHK method line 47
Reorgck_All:terminated with error
REASON=ADBC error
Job finished
P.S. Database version is DB2 9.7
Regards and Thanks for your help,
Nadia

Error starting data collection CPU Utilization Chart

I encountered this error when tried to display any charts in Performance Manager of OEM. There are 2 error messages on separate popup window. Here the 1st error messages:
VTM-0048 : Error starting data collection CPU Utilization Chart
java.lang.NoClassDefFoundError: oracle/sysman/vtm/chart/VtmPieChart
at
at oracle.sysman.vtm.chart.VtmChartFactory.getChart(VtmChartFactory.java:212)
at oracle.sysman.vtm.VtmChartPanel.createChart(VtmChartPanel.java:391)
at oracle.sysman.vtm.VtmChartPanel.startCollection(VtmChartPanel.java:1179)
at oracle.sysman.vtm.VtmChartPanel.startCollection(VtmChartPanel.java:1194)
at oracle.sysman.vtm.VtmChartPanel.startRecording(VtmChartPanel.java:1801)
2nd error message came out following the 1st error message:
VTM-0002 : Error displaying chart CPU Utilization Chart
java.lang.NoClassDefFoundError: netcharts/graphics/NFDwellObserver
at
at oracle.sysman.vtm.chart.VtmChartFactory.getChart(VtmChartFactory.java:212)
at oracle.sysman.vtm.VtmChartPanel.createChart(VtmChartPanel.java:391)
at oracle.sysman.vtm.VtmChartPanel.setChartType(VtmChartPanel.java:815)
at oracle.sysman.vtm.VtmChartPanel.processNewData(VtmChartPanel.java:733)
at oracle.sysman.vtm.VtmVPClient.sampleComplete(VtmVPClient.java:214)
Does anyone know how to fix it ?
Regards,
Tom

Thans Dan,
I have gone in the program UGMDSYNC, and getting few Gls which have not assigned Cons Chart of account.
Kindly tell me how to assign chart of account to these GL account?

Getting Error in Data Collection - FDPSTP failed due to ORA-23401

Hi All,
I am really new to ATP Setup and after referring to the Metalink notes, I have compelted the setups required to calculate ATP in Sales Order Window.
But when I am submitting the Data Collection which is the last step I guess, the program is ending with Error.
I am getting the error.
FDPSTP failed due to ORA-23401: materialized view "APPS"."MTL_OH_QTYS_SN" does not exist.
And because of this, when I am going to Sales Order to check the ATP, I am getting the error that Try Calculating ATP Again.
Please Help. Project is into a critical stage and I am stuck with this error.
With Regards,
Vishal Majithia

Please mention the application release.
I am really new to ATP Setup and after referring to the Metalink notes, I have compelted the setups required to calculate ATP in Sales Order Window.What is the document you are referring to?
I am getting the error.
FDPSTP failed due to ORA-23401: materialized view "APPS"."MTL_OH_QTYS_SN" does not exist.Please see if these docs help.
Refresh Snapshot Errors With ORA-12034: Snapshot Log On "BOM"."BOM_SUB_OPERATION_RESOURCES" Younger Than Last Refresh [ID 180705.1]
How to Rebuild Source Snapshots Used in the Data Collection or Planning Data Pull MSCPDP [ID 148584.1]
Thanks,
Hussein

ASCP Data Collection Error

Hi,
Environment: Decentralized
Number of Org: One
After doing initial setup in Dev Planning and Source instances,
In Planning Instance, When I launched "Planning ODS Load", this set is launching the concurrent program "Generate Items and Category Sets Keys".
The concurrent "Generate Items and Category Sets Keys" completed with the below Error.
ORACLE error 1400 in FDPSTP
Cause: FDPSTP failed due to ORA-01400: cannot insert NULL into ("MSC"."MSC_ITEMS"."ITEM_NAME")
ORA-06512: at "APPS.MSC_CL_ITEM_ODS_LOAD", line 1955
ORA-06512: at "APPS.MSC_CL_COLLECTION", line 6853
ORA-06512: at line 1
The
Start of log messages from FND_FILE
28-DEC 12:10:47 : ========================================
28-DEC 12:10:47 : Error in PROCEDURE=GENERATE_ITEM_KEYS, TABLE=MSC_ITEMS
28-DEC 12:10:47 : COLUMN=ITEM_NAME, VALUE=
28-DEC 12:10:47 : ORA-01400: cannot insert NULL into ("MSC"."MSC_ITEMS"."ITEM_NAME")
28-DEC 12:10:47 : ORA-01400: cannot insert NULL into ("MSC"."MSC_ITEMS"."ITEM_NAME")
What setups I need to do?
For your information, I launched "Create Planning flexfields" in source Instance. But this Issue is not yet resolved
Your answer will be most appreciable
Regards,
Ramesh

Dear Shiva / Experts,
I completed the Actions
1. Recompiling the System Item Flexfields - In Source Instance.
3. Refresh Collection Snapshots with Complete Mode - In Source Instance
4) Then I tried Planning ODS Load before Data Collection (Why I launched ODS load manually is, Data collection is getting error with recommending ODS Load).
But I am getting the same old below ERROR MESSAGE.
5) Then I tried Action plan 2 (we found one item having null value in Segment1 and we given one value and committed), then I did Actions 1, 3 and 4. But I am getting the same old Error message.
6) After completing the Actions 1 to 5, I am in same old status.
Please suggest me
Your answer will be most Appreciable
Regards,
Ramesh
Action point 2 is
Select count(*) FROM MTL_SYSTEM_ITEMS_B where SEGMENT1 is NULL;
Solution
1. Confirm that the Item Staging Table does indeed have values in the Item_Name
column for all rows (in this case they did)
2. Confirm that the mtl_system_items_b table has null Segmen1 values
select * from apps.MTL_SYSTEM_ITEMS_B where segment1 is null;
3. Populate the missing values for SEGMENT1:
Note that we don't think it will be possible for you to edit this field, that
represents Segment1, directly in the Item Master so you will need to do it using
this SQL statement:
UPDATE mtl_system_items_b
SET segment1 = &segment1
WHERE inventory_item_id = &itemid ;
commit;
Please make sure that SEGMENT1 value that you provide in the above script is
unique i.e. does not already exist.
ERROR MESSAGE:
The concurrent "Generate Items and Category Sets Keys" completed with the below Error.
ORACLE error 1400 in FDPSTP
Cause: FDPSTP failed due to ORA-01400: cannot insert NULL into ("MSC"."MSC_ITEMS"."ITEM_NAME")
ORA-06512: at "APPS.MSC_CL_ITEM_ODS_LOAD", line 1955
ORA-06512: at "APPS.MSC_CL_COLLECTION", line 6853
ORA-06512: at line 1
Start of log messages from FND_FILE
28-DEC 12:10:47 : ========================================
28-DEC 12:10:47 : Error in PROCEDURE=GENERATE_ITEM_KEYS, TABLE=MSC_ITEMS
28-DEC 12:10:47 : COLUMN=ITEM_NAME, VALUE=
28-DEC 12:10:47 : ORA-01400: cannot insert NULL into ("MSC"."MSC_ITEMS"."ITEM_NAME")
28-DEC 12:10:47 : ORA-01400: cannot insert NULL into ("MSC"."MSC_ITEMS"."ITEM_NAME")
Your Answer will be most Appreciable
Regards,
Ramesh

SMD installation - Initial Data Collect ERROR

I installed the SMD on several machines already, SP13 and NW2004 are used. When I try to configure the production system, I get this error:
Initial Data Collect ERROR for host sapbp5a0.agfa.be
!! Exception : Thu Jul 17 13:57:39 MEST 2008 | storeHost(...):Host [][sapbp5a0][10.233.9.188][/usr/sap/BP5/]:Cannot insert/update the host '[IHost: key=1216295859558156, hostName=sapbp5a0, hostFullQualifiedName=, serverName=sapbp5a0, ip=10.233.9.188, agentHostName=sapbp5a0, agentFullQualifiedName=sapbp5a0.agfa.be, agentIp=10.233.9.188, path=/usr/sap/BP5/, pathName=null, SmStatus=U, creation=Thu Jul 17 13:57:39 MEST 2008]'! Please see log for next error(s).
We (I) know we need to input the hostFullQualifiedName somewhere, but we cannot find the place to put it. Can anyone please give us a clue to where we need to put this?

Hi, thank you for the input, but I think I gave too little information. Let me elaborate:
The monitoring system we are using is YP5, the monitored system is BP5. On BP5 is where the problem is situated. I installed the SMD according to the SAP specs and now I am at the end of the installation, just before installing the Wily.
I log on via http://sapyp5a0.agfa.be:55100/webdynpro/dispatcher/sap.com/tcsmdnavigation/SmdNavigation to setup the final things (collection of data and so on, running Wily, ...) and this is where I get the error, after I entered all the correct information.
We checked the SLD settings in ABAP and everything is connecting as it should.
Anyone has any more ideas where we could look?
Edited by: David Liekens on Jul 17, 2008 3:43 PM

Access 2010 InfoPath Data Collection Export Fails Due to Date Format That Includes Time Zone

I created an Access 2010 database that has multiple data collection (InfoPath) forms that were generated from Access and have been in use for about 1.5 years. Starting in 2013 (for about a week now), the submitted data fails to Export due
to a "data type conversion error" with the date fields. Prior to 2013, the date string returned in the InfoPath form looked like this: "2013-01-07T00:00:00", but now it looks like this: "2013-01-07T00:00:00-05:00". The time zone is appended
to the string and it kills the Outlook Export feature.
To test this, I created a new database with one table and one date time field. I generated an InfoPath template and emailed it to myself. I entered the date into the template and submitted it (tried manually entering the date as well as
using the date time picker control - made no difference). The InfoPath template now contains "2013-01-07T00:00:00-05:00" and will not Export from Outlook to Access. I tried manually pasting the string into the Access table and it would take it,
but would show "1/7/2013 5:00:00 AM" in the date time field (which isn't correct either but at least it took). Note: This problem has appeared at my office (Win 7 with Office 2010), but my testing was done on my personal laptop using Win 8 with Office
2010.
It looks like Microsoft has created a bug and now all of my data collection forms are unusable. Any help will be appreciated.

Microsoft confirmed that the issue was introduced with MS12-066 as follows:
***Start Quote
We have been able to identify that this issue was introduced with the change made for the hotfix detailed in KB 2687395. This update was included in the security update MS12-066 when you installed KB 2687417.
2687395 Description of the InfoPath 2010 hotfix package (ipeditor-x-none.msp): August 28, 2012
http://support.microsoft.com/kb/2687395/EN-US
2687417 MS12-066: Description of the security update for InfoPath 2010 Service Pack 1: October 9, 2012
http://support.microsoft.com/kb/2687417/EN-US
Investigating workarounds I've only come up with using HTML forms or changing the datatype of the control to text.
***End Quote
My own testing also indicates that if you are using InfoPath with SQL Server, you may be able to change the Date/Time picker control in InfoPath to a Date only picker control (if the SQL Server data
type will support that).

Data Collection job collection_set_2_upload failed

We had a standalone server which was SQL server 2000 R2. I had configued the Data Collection job and uploded the data into our Management Data Warehouse. It had worked fine. One week ago, the standalone server was re-built and
then I found that all 4 jobs didn't work.
collection_set_2_collection
collection_set_2_upload
collection_set_3_collection
collection_set_3_upload
I re-configured both Management Data Warehouse and Data Collection. Now the two collection_set_2_collection and collection_set_3_collection worked fine. However the two collction_set_2_upload and collection_set_3_upload didn't work with an error "the
step did not generate any output". I cleaned up all DataCollectorCache files on the standalone server but the error stayed.
Any idea? Thank you for any kind of suggestion.
Charlie He

Hi Charlie,
Based on my understanding, you configured Data Collection job. Then two upload jobs didn't work with an error "the step did not generate any output". And error also existed after cleaning up Data Collector cache files.
New data cannot be uploaded to the Management Data Warehouse database when one or more Data Collector cache files are corrupted. The corruption may be caused for one of the following reasons:
Data Collector encountered an exception.
The disk runs out of free space while Data Collector is writing to a cache file.
A firmware or a driver problem occurs.
So I suggest you double check if Data Collection cache files are cleaned up completely. For more information, please refer to this kb:
http://support.microsoft.com/kb/2019126.
If issue persists exist, please check the agent job history to find the error log around the time issue caused. It would be better if you could provide detail error information for our further analysis. About how to check agent job history, please refer
to this link:
http://msdn.microsoft.com/en-us/library/ms181046(v=sql.110).aspx.
Best regards,
Qiuyun Yu

Alert data collection process unable to write data to the Data Warehouse

Alert data collection process unable to write data to the
Data Warehouse. Failed to store data in the Data Warehouse. The operation will
be retried.
Exception 'InvalidOperationException': The given value of type
String from the data source cannot be converted to type nvarchar of the
specified target column.
One or more workflows were affected by this.
Workflow name:
Microsoft.SystemCenter.DataWarehouse.CollectAlertData
Instance name: Data
Warehouse Synchronization Service
Instance ID:
{9A0B3744-A559-3080-EA82-D22638DAC93D}
Management group: SCOMMG
Can anybody Help?

About 24 hours ago, one of my four management servers began generating this error every 10 minutes; we only upgraded to SCOM 2012 R2 a couple weeks ago, I have NOT installed UR1. No new management packs or database changes have been made within the
last week; KB945946 is not related to this. An Event ID 11411 warning started occurring around the same time as this started and repeats every 10 minutes, too:
Alert subscription data source module encountered alert subscriptions that were waiting for a long time to receive an acknowledgement.
Alert subscription ruleid, Alert subscription query low watermark, Alert subscription query high watermark:
5fcdbf15-4f5b-29db-ffdc-f2088a0f33b7,03/27/2014 00:01:39, 03/27/2014 20:30:00
Performance on the Data Warehouse database server seems fine; CPU, memory and disk I/O are good.
How can we identify where the problem is?

Data Collection -- Planning Data Pull process failed

Hello Experts,
I am having a problem with data collection, the result of Planning Data Pull was completed error. It seems the problem is on the Planning Data Pull Worker.
I am using 2 worker to run Planning Data Pull, and both result was errors. Below are some of the errors log:
16-MAY 19:11:34 : Procedure MSC_CL_SETUP_PULL.LOAD_CALENDAR_DATE started.
Into populate_rsrc_cal
16-MAY-2011 19:11:40
APS string is Invalid, check for Error condition
16-MAY 19:11:40 : Error in Routine GMP_CALENDAR_PKG.POPULATE_RSRC_CAL.
16-MAY 19:11:40 : User-Defined Exception
16-MAY 19:11:40 : User-Defined Exception
16-MAY 19:11:40 : Error_Stack...
16-MAY 19:11:40 : ORA-06510: PL/SQL: unhandled user-defined exception
16-MAY 19:11:40 : Error_Backtrace...
16-MAY 19:11:40 : ORA-06512: at "APPS.MSC_CL_PULL", line 6218
ORA-06512: at "APPS.MSC_CL_PULL", line 1583
Help me please.
Thanks & Regards,
Andi

This error shows up when it cannot find any organizations.
Use the sqls below to identify this
1. select MSC_CL_PULL.get_org_str(&instance_id) from dual ;
2. select instance_code, instance_id from msc.msc_apps_instances where instance_code='&instance_code'
3. select * from apps.msc_instance_orgs where sr_instance_id= &instanc_id
sql 1 should in principle return the orgs available. If this returns null or -9999, then it's an orgs problem
sql 3 will show the available orgs.
If the organizations are enabled for planning in the ASCP instances form, then run a targeted refresh for trading partners (suppliers/customers/orgs). If this works with no errors, then look at the table msc_trading_partners. It should contain records for the orgs with partner_type = 3

Error while passing date parameters in procedure and commit issue

Hi
1) I am doing a archiveing records and pls find my code below and i have couple of issue,pls find my code and want to ensure the commit is happening every 100000 rows inserted but i am archeiving a huge table but when i checks the table frequently it shows 0 records and after it shows count the actual rows around 20 million records.How can i ensure it commiting on every 100000 records. pls find my code my db version is 10g on windows
CREATE OR REPLACE PROCEDURE doins as
cnt number:=0;
FOR x IN (select * from Call_log
where trunc(c_date) = to_date('11-Aug-2008','DD-MON-YYYY'))
LOOP
INSERT INTO call_arch
select * from Call_log
where trunc(c_date) = to_date('11-Aug-2008','DD-MON-YYYY');
cnt := cnt + 1;
IF( cnt = 10000 )
THEN
cnt := 0;
commit;
END IF;
commit;
END LOOP;
2) Error while passing date as parameter i am getting following errors while passing date parameter pls find my code and errors
CREATE OR REPLACE PROCEDURE doins(p_date date) as
cnt number:=0;
begin
FOR x IN (select * from Call_log
where trunc(c_date) = to_char(p_date,'DD-MON-YYYY'))
LOOP
INSERT INTO call_arch
select * from Call_log
where trunc(c_date) = to_char(p_date,'DD-MON-YYYY');
cnt := cnt + 1;
IF( cnt = 10000 )
THEN
cnt := 0;
commit;
END IF;
commit;
END LOOP;
end;
exec doins(11-Aug-2008) then gives
SQL> exec doins(11-Aug-2008);
BEGIN doins(11-Aug-2008); END;
ERROR at line 1:
ORA-06550: line 1, column 16:
PLS-00201: identifier 'AUG' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
if i gave exec doins(11-08-2008) it gaves
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'DOINS'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
rgds
rosh

CREATE OR REPLACE PROCEDURE doins(p_date varchar2) as
cnt number:=0;
begin
FOR x IN (select A.rowid,A.* from Call_log A
where trunc(c_date) = to_date(p_date,'DD-MON-YYYY'))
--hope that's c_date columne is DATE datatype
LOOP
INSERT INTO call_arch
select * from Call_log
where rowid=x.rowid;
cnt := cnt + 1;
IF( cnt = 10000 )
THEN
cnt := 0;
commit;
END IF;
commit;
END LOOP;
end;
thats your correct procedure - but NOT CORRECT ISSUE.
You should use bulk collect with limit clause and forall clause to do it faster!!! Or Merge clause.

Errors in weekly data collection

Similar Messages

Maybe you are looking for