Canon i560 printing scale error

Help I have a MacBook that prints perfectly when I plug in usb directly to the printer. However whenever I try to use across my MS network at home it scales the printing down to 1/4 page? I have tried everything and am at a loss. I have reinstalled the printer driver (which the Mac still does not recognize), from both disc and from Canon website. Neither way appears to work. When printing from a Windows laptop connected to home network, printing is flawless as it is from the desktop. Problem is obviously in the networking (MS router). Any suggestions or help would be greatly appreciated.
John

You cannot use the UFR2 driver via a Windows queue. The UFR2 queue need to be configured so that it is connecting directly to the Canon machine. If the iR1025 has an Ethernet port then I suggest you have it connected directly to the network hub rather than to the Windows computer. If the iR1025 only has a USB port then you would have to look at using the following procedure to print via the Windows queue.
http://iharder.sourceforge.net/current/macosx/winmacprinter/

Similar Messages

Sudden Canon CMFP Printer Driver Error?

My Canon MF8380 had been working fine with my macbook pro (printing wirelessly), and all of a sudden today I am getting an error that says:
"Canon CMFP Printer Driver: Printer is not responding. Check the printer power and connection, and then try sending printing job again."
I have tried the basics - turning off and on the printer, rebooting the macbook pro, printing from different applications, making sure Job Accounting is not checked in setup, seeing that the driver seems like it's acknowledged, checking and unchecking sharing prefs... Not versed enough to do much beond that.
Any advice?
Thanks in advance!

Canon just released a new print driver that fixed my exact same error.

Canon S750 printer not working after upgrading to Leopard

Leopard is brilliant, and everything works after I upgraded from Tiger except... my Canon S750 printer gives error messages and fails to print. This is VERY annoying. I can't seem to find an S750 driver for OS X 10.5 on Canon's web site. So, what to do next? Just wait, and keep logging on to Canon's web site in the hope that, one day, the driver will be there? I can't find any official statement from Canon as to what they're up to. Are they currently working on drivers for Leopard? Do they have any projected "release dates"? Are they at all interested, or would they prefer to sell me another printer perhaps? Any information on what I should do now will be gratefully received. Thanks.

UPDATE... my S750 printer has suddenly started to print OK! This is rather bizarre, since I've not re-booted, haven't un-installed/re-installed the printer. End of topic!

Canon MF4400w Printer - "Filter" failed error. Can't scan either.

Hi,
I work in a wholly Mac environment. We have around 10 plus Macs in the office, most of them running 10.8.3 (the latest I believe). All Macs are able to print to our Canon MF4400w Printer fine EXCEPT mine.
I've had a Canon technician come by. We've installed/reinstalled the canon drivers multiple times, tried via USB/Wireless, and I personally looked up these forums to try and diagnose the problem myself. As far as I can tell, it has something to do with "capdftopdl", whatever that is.
This is a new iMac that was purchase a few weeks ago. I've used migration assistant to transfer my files from my old Mac to this new one via LAN cable. Printing from this Mac has always resulted in the "Stopped. "Filter" failed." error. It has never printed successfully despite trying multiple different drivers.
Log printout from console:
D [11/Apr/2013:14:25:15 +0800] [Job 22] The following messages were recorded from 14:25:07 to 14:25:15
D [11/Apr/2013:14:25:15 +0800] [Job 22] Adding start banner page "none".
D [11/Apr/2013:14:25:15 +0800] [Job 22] Queued on "CanonMF4400w" by "Ian".
D [11/Apr/2013:14:25:15 +0800] [Job 22] File of type application/pdf queued by "Ian".
D [11/Apr/2013:14:25:15 +0800] [Job 22] Setting job-hold-until to no-hold
D [11/Apr/2013:14:25:15 +0800] [Job 22] Adding end banner page "none".
D [11/Apr/2013:14:25:15 +0800] [Job 22] Job released by user.
D [11/Apr/2013:14:25:15 +0800] [Job 22] time-at-processing=1365661508
D [11/Apr/2013:14:25:15 +0800] [Job 22] job-sheets=none,none
D [11/Apr/2013:14:25:15 +0800] [Job 22] argv[0]="CanonMF4400w"
D [11/Apr/2013:14:25:15 +0800] [Job 22] argv[1]="22"
D [11/Apr/2013:14:25:15 +0800] [Job 22] argv[2]="Ivan"
D [11/Apr/2013:14:25:15 +0800] [Job 22] argv[3]="Microsoft Word - Art.docx"
D [11/Apr/2013:14:25:15 +0800] [Job 22] argv[4]="1"
D [11/Apr/2013:14:25:15 +0800] [Job 22] argv[5]="AP_ColorMatchingMode=AP_ApplicationColorMatching AP_D_InputSlot= brightness=100 CN_PdlWrapper_DebugMode=0 noCNBarCode CNBrightness=6 CNContrast=6 CNCopies=1 CNEncodeType=1 CNGamma=1.4 CNHalftone=pattern1 CNLANG=en_US CNPDECALL=CNLZ0050 CNPDEUserName=SXZhbg== CNPrintSetting..b. CNQueueDescription=CanonMF4400w CNSpecialPrintMode=Mode2 CNSystemEncoding=0 noCNTonerSaving noCNWhiteGap collate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMApplicationName=Word com.apple.print.JobInfo.PMJobName=Microsoft\ Word\ -\Art.docx com.apple.print.JobInfo.PMJobOwner=Ian com.apple.print.PageToPaperMappingMediaName=A4 com.apple.print.PageToPaperMappingType..n.=1 com.apple.print.PrinterInfo.PMColorDeviceID..n.=5857 com.apple.print.PrintSettings.PMColorSpaceModel..n.=1 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMDestinationType..n.=1 com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 DestinationPrinterID=CanonMF4400w Filter=None gamma=1000 media=A4 MediaType=PlainPaper number-up=1 PageSize=A4 PaperInfoIsSuggested..b. printer-resolution=600x600dpi pserrorhandler-requested=standard Resolution=600x600dpi job-uuid=urn:uuid:a34846a9-9952-3032-4bca-848f99cecd0e job-originating-host-name=localhost time-at-creation=1365661507 time-at-processing=1365661508 job-impressions=2 com.apple.print.PrintSettings.PMTotalSidesImaged..n.=2 com.apple.print.PrintSettings.PMTotalBeginPages..n.=2"
D [11/Apr/2013:14:25:15 +0800] [Job 22] argv[6]="/private/var/spool/cups/d00022-001"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[0]="<CFProcessPath>"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[9]="HOME=/private/var/spool/cups/tmp"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[11]="SERVER_ADMIN=root@localhost"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[12]="SOFTWARE=CUPS/1.6.2"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[14]="USER=root"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[15]="CUPS_MAX_MESSAGE=2047"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[16]="CUPS_SERVER=/private/var/run/cupsd"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[17]="CUPS_ENCRYPTION=IfRequested"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[18]="IPP_PORT=631"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[19]="CHARSET=utf-8"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[20]="LANG=en_US.UTF-8"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[21]="APPLE_LANGUAGE=en-US"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[22]="PPD=/private/etc/cups/ppd/CanonMF4400w.ppd"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[23]="RIP_MAX_CACHE=128m"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[24]="CONTENT_TYPE=application/pdf"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[25]="DEVICE_URI=dnssd://CanonMF4400w._pdl-datastream._tcp.local./?bidi"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[26]="PRINTER_INFO=CanonMF4400w"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[27]="PRINTER_LOCATION="
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[28]="PRINTER=CanonMF4400w"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[29]="PRINTER_STATE_REASONS=none"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[30]="CUPS_FILETYPE=document"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[31]="FINAL_CONTENT_TYPE=printer/CanonMF4400w"
D [11/Apr/2013:14:25:15 +0800] [Job 22] envp[32]="AUTH_I****"
D [11/Apr/2013:14:25:15 +0800] [Job 22] Started filter /Library/Printers/Canon/CUPS_MF_Printer/Bins/capdftopdl (PID 5017)
D [11/Apr/2013:14:25:15 +0800] [Job 22] Started backend /usr/libexec/cups/backend/dnssd (PID 5018)
D [11/Apr/2013:14:25:15 +0800] [Job 22] Resolving "CanonMF4400w._pdl-datastream._tcp.local."...
D [11/Apr/2013:14:25:15 +0800] [Job 22] STATE: +connecting-to-device
D [11/Apr/2013:14:25:15 +0800] [Job 22] Resolving "CanonMF4400w", regtype="_pdl-datastream._tcp", domain="local."...
D [11/Apr/2013:14:25:15 +0800] [Job 22] Looking for printer.
D [11/Apr/2013:14:25:15 +0800] [Job 22] Set job-printer-state-message to "Looking for printer.", current level=INFO
D [11/Apr/2013:14:25:15 +0800] [Job 22] Resolved as "socket://Canonb0a4b0.local.:9100/"...
D [11/Apr/2013:14:25:15 +0800] [Job 22] STATE: -connecting-to-device,offline-report
D [11/Apr/2013:14:25:15 +0800] [Job 22] Executing backend "/usr/libexec/cups/backend/socket"...
D [11/Apr/2013:14:25:15 +0800] [Job 22] capdftopdl start.
D [11/Apr/2013:14:25:15 +0800] [Job 22] STATE: +connecting-to-device
D [11/Apr/2013:14:25:15 +0800] [Job 22] Looking up "Canonb0a4b0.local."...
D [11/Apr/2013:14:25:15 +0800] [Job 22] STATE: -com.canon.unsupportedsize-error
D [11/Apr/2013:14:25:15 +0800] [Job 22] PID 5017 (/Library/Printers/Canon/CUPS_MF_Printer/Bins/capdftopdl) stopped with status 1.
D [11/Apr/2013:14:25:15 +0800] [Job 22] Hint: Try setting the LogLevel to "debug" to find out more.
D [11/Apr/2013:14:25:15 +0800] [Job 22] hrDeviceDesc="Unknown"
D [11/Apr/2013:14:25:15 +0800] [Job 22] prtGeneralCurrentLocalization type is 5, expected 2!
D [11/Apr/2013:14:25:15 +0800] [Job 22] backendWaitLoop(snmp_fd=5, addr=0x7fa1dac0d458, side_cb=0x108df9013)
D [11/Apr/2013:14:25:15 +0800] [Job 22] PID 5018 (/usr/libexec/cups/backend/dnssd) exited with no errors.
D [11/Apr/2013:14:25:15 +0800] [Job 22] End of messages
D [11/Apr/2013:14:25:15 +0800] [Job 22] printer-state=3(idle)
D [11/Apr/2013:14:25:15 +0800] [Job 22] printer-state-message="Filter failed"
D [11/Apr/2013:14:25:15 +0800] [Job 22] printer-state-reasons=none
E [11/Apr/2013:14:30:19 +0800] [Job 22] Stopping unresponsive job.
Things I have tried:
1) Some threads suggest that it may be a corrupted Font problem. Followed steps suggested by thread, no luck.
2) Some suggested it was a setting under network. Followed those steps, still same problem.
3) Setting paper print size to A4/Letter
Please help!

Can you reply with your email address, but in the form of user_name at domain_name dot com (dot country if applicable). I have some files to send you to replace the Canon files that are possibly causing the error.
Also, for your reference, you posted in the Lion forum but you have Mtn Lion. If you posted in the Mtn Lion forum I would have got to you sooner.

My MP560 canon printer says: error has occurred, B200. Unplug power cord and contact canon

my MP560 canon printer says: error has occurred, B200. Unplug power cord and contact canon

Hi hthpggy,
To try and resolve the issue, please remove the power cord from the back of the printer and leave it out for at least 10 minutes, then plug it back in and turn it back on. If the error persists, the printer will require servicing to resolve the issue.
Please drop us a line by clicking on the Contact Us link to start the process!

My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error.

My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error. Any ideas?

Hi Pebbles2313,
It sounds like you have an issue with your printer software. You may find some of the software necessary to run your printer through the following link:
OS X: Printer and scanner software available for download - Apple Support
http://support.apple.com/en-is/HT201465
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but comes up with software unavailable error.

My Canon MG4150 printer won't connect. Im using OS X10.7 which says is compatible. Its identifies via USB and says downloading, but then comes up with software unavailable error.

Try downloading the driver directly from Canon's web site.

I can't see my Canon MG5220 printer... Initially I was getting "there is a communication error" so I rebooted everything, reset the printing system, reinstalled the driver and still NO luck! It seems to see the scanner, but never the printer. HELP!

I can't see my Canon MG5220 printer... Initially I was getting "there is a communication error" so I rebooted everything, reset the printing system, reinstalled the driver and still NO luck! I see no printers available in the Print & Scan area. If I click "+" it seems to see the scanner, but never the printer. HELP!

The printer component uses a different protocol to advertise itself on the network compared to the scanner component and it can take several seconds longer to appear after the scanner has.
That said, with the introduction of AirPrint, the MG should be seen as Bonjour Multifunction in the Add Printer window, as shown below.
Selecting this Bonjour Multifunction entry will create a printer using AirPrint and a scanner using the iCA driver.
So do you see the MG5220 as Bonjour Multifunction or just Bonjour?

How do you clear Error Message 3100? After installing the New inks, On NEW 'Canon MX432' Printer

Have NEW ‘Canon MX432’, (1)-followed the instructions to set language without problem, next step, checked for the Set ink cartridge Message, (2)-and then opened the Paper Output Tray and the Paper Output Cover.
On the second try; (3)-the Head Cover opened automatically, (4)-then lowered the Color Ink Cartridge Lever, (5)-Unpacked the FINE Cartridge and remove the protective tape, (6)-then Inserted the FINE Cartridge straight in until it stopped, (7)-and lifted the Color Ink Cartridge Lever.
Next did the same steps (8) - (9) - (10)- (11)-to the Black Cartridge, next (12)-Closed the Paper Output Cover.
*** Should I have waited and lifted both Levers at the same time? ***
(13)-Waited for printer, (14)-got error Message; ”Printer Error occurred”, then the numbers; “5100”.
Have tried unplugging the printer a few minutes and repeating the steps from the start to no avail.
Next will go buy new Ink and try again or return this Canon MX432 Printer, for a different Model.
Do not want to install new Ink Color and Black Cartridges until I understand the problem solution.
Have used Canon products for over 30 years never had this problem or any problems with their products which could not be resolved by me.
Steps Followed:
*** Do you see a problem with these steps taken? ***
(1)- Set language
Waited for the “Set ink cartridge” Message
(2)- Opened the Paper Output Tray and the Paper Output Cover
(3)-The Head Cover opened automatically
(4)-Lowered the Color Ink Cartridge Lever
(5)-Unpacked the Color FINE Cartridge and remove the protective tape
(6)-Inserted the FINE Cartridge straight in until it stopped
(7)-Lifted the Color Ink Cartridge Lever
(8)-Lowered the Black Ink Cartridge Lever on the left
(9)-Unpacked the Black FINE Cartridge and remove the protective tape
(10)-Inserted the Black FINE Cartridge straight in until it stopped
(11)-Lifted the Color Ink Cartridge Lever
(13)-Closed the Paper Output Cover
*** Should I have waited and lifted both Levers at the same time? ***
(13)-Waited for printer
(14)-Got error Message: ”Printer Error occurred”, then the numbers; “5100”

Hi Anselmo_MSW!
It looks as though you have followed the correct steps and no, you do not need to lift up both levers at the same time.
The error code 5100 indicates that an internal error has occurred which may be resolved by resetting the printer. Please follow these steps for isolating and resetting the printer:
1. Open the printer's front cover, and then open and close the print head lock lever (do not remove the print head).
2. Make sure all ink tanks are seated properly.
3. Make sure all packing materials have been removed.
4. Make sure no paper is jammed in the printer.
5. Disconnect the printer cable from the printer.
6. Close the front cover and turn the printer off.
7. Unplug the printer from the power source, and then plug it back in after five minutes.
8. Power on the printer.
If the error returns, the printer will require service options. I realize you have just purchased this and wanted to let you know that this is not the normal operation of our printers. What I would recommend is contacting a Canon Representative using the following link to learn of your service options. Contact Us.

Text not printing with Black Ink on Canon i560

I've been having a pretty annoying problem with my Canon i560: When printing black text, instead of using the black ink, the printer mixes black from the color inks. This has been a problem for a little while but recently, the colors got a little offset so it became really obvious.
Also, I just received an update for the Canon printer drivers and according to the Apple page, the Canon i560 is supported and the drivers are actually updated.
I'm pretty sure that it's a driver problem because I can print from a Windows virtual machine to the exactly same printer all other variables remaining the same - and guess what: When printing from Windows, black is black, colors are colors, as one would expect with this kind of printer.
So, does anyone have an idea how I can make my make send the right signals to my Canon i560?
Here's the data from my System Report:
Canon i560:
Status:     Idle
Print Server:     Local
Driver Version:     10.57.2.0
Default:     Yes
Shared:     Yes
URI:     usb://Canon/i560?serial=2089RX
PPD:     Canon i560
PPD File Version:     10.57.2.0
PostScript Version:     (3010.000) 705
CUPS Version:     1.5.3 (cups-297.9)
Fax support:     No
Scanning support:     No
Printer Commands:     PrintSelfTestPage ReportLevels
CUPS filters:
Raster2CanonIJ:
Path:     /Library/Printers/Canon/BJPrinter/Filters/Raster2CanonIJ/Raster2CanonIJ.bundle/ Contents/MacOS/Raster2CanonIJ
Permissions:     rwxr-xr-x
Version:     10.57.2
Command2CanonIJ:
Path:     /Library/Printers/Canon/BJPrinter/Filters/Command2CanonIJ.bundle/Contents/MacOS /Command2CanonIJ
Permissions:     rwxr-xr-x
Version:     10.57.2
Printer utility:     /Library/Printers/Canon/BJPrinter/Utilities/BJPrinterUtility2.app
Printer utility version:     7.27.3
PDEs:
CanonIJPDE.bundle:
Sandbox compliant:     Yes

holtsch wrote:
Ah, sorry, I missed that when reading your reply. Probably should have re-read it. However, I have just made a test-print from TextEdit with the "Grayscale Printing" checkbox enabled - and I'm still getting precisely the same ugly, greenish result.
Then it is not working as it should be and it is either the driver or the core printing system. To check both there is alternate driver available called Gutenprint. With this driver suite installed you can create another printer queue on the Mac, this time selecting the Gutenprint i560 driver. When you then print and have the i560 Gutenprint driver selected, change to the Printer Features menu and then select the General tab in Feature Sets submenu and then set the Color Model to Grayscale. Does this work correctly?
And with the Canon driver, if you want to repair the colour offset, you can go to Print & Scan, select the i560 using the Canon driver and then open Options & Supplies. Then select the Utilities tab and click on Open Printer Utility. This will open the Canon IJ Printer Utility. From here you can select the Test Print menu and then Print Head alignment.

Canon printer randomly erroring out during printing.

A few weeks ago I bought a new AEBS and hooked up my Canon MP530 printer to it. I printed out a few things from my Mac. My wife printed out a few things from her PC. Everything seemed fine.
Today I go to print out a simple two page pdf and about 75% of the way through page 1, the printer stops. I look in the print queue and it is just sitting there saying it is printing, but nothing is happening. I click the pause button in the print queue, and the printer spits out the paper and essentially cancels the job.
I try reprinting several times, but every time it does the exact same thing at a random point. Sometimes it almost completes, sometimes it errors after 1/4 of a page.
I clicked the "reset all printer functions" or whatever it is called in the print queue and that didn't help.
I was using the default Leopard Canon printers, which are the exact same version number as what Canon has on their site. I have never had a problem in the past 6 months using a direct USB connection, but I figure I would try reinstalling the drivers. I follow the instructions given by Canon to remove the old drivers and install the new ones. Of course, there is no change.
I connect the printer via USB and print the document no problem without changing a single setting.
I look in the error log and this is what I see (I set a marker before I tried printing, so this is the exact point that I clicked print):
I [03/Jun/2008:18:55:15 -0400] [Job 4] Adding start banner page "none".
I [03/Jun/2008:18:55:15 -0400] [Job 4] Adding job file of type application/pdf.
I [03/Jun/2008:18:55:15 -0400] [Job 4] Queued on "Canon_MP530" by "dcorban".
I [03/Jun/2008:18:55:15 -0400] [Job 4] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 313)
E [03/Jun/2008:18:58:55 -0400] Pause-Printer: Unauthorized
I [03/Jun/2008:18:58:55 -0400] Saving printers.conf...
I [03/Jun/2008:18:58:55 -0400] Printer "Canon_MP530" stopped by "dcorban".
I [03/Jun/2008:18:59:02 -0400] Saving printers.conf...
I [03/Jun/2008:18:59:02 -0400] Printer "Canon_MP530" started by "dcorban".
I [03/Jun/2008:18:59:02 -0400] [Job 4] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 322)
E [03/Jun/2008:18:59:10 -0400] PID 313 (/System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr) crashed on signal 14!
I [03/Jun/2008:18:59:10 -0400] Hint: Try setting the LogLevel to "debug" to find out more.
The first line that starts with "E" is after 3 minutes of the printer sitting there doing nothing. I clicked the pause button. This caused the printer to eject the paper. A couple seconds later I clicked resume and nothing happened. About 10 seconds later I click the delete job button (the second "E" line mentioning signal 14).
This "crash on signal 14" is the error message every single time. I did a google search and only came up with one other mention of this and it was another user asking *** was going on.
Since it works via USB, I can only assume that it is a problem with the base station or the printer drivers. Has anyone had this error before and what did you do to fix it?

You can check the cartridge warranty as shown here. The warranty for cartridges is separate from the printer warranty and is generally two years from the date of manufacture.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Canon MF4570dn Printer error: capdftopdl failed

I have three iMacs all running OSX v10.6.8 and connected to a Canon MF4570dn printer via network static IP - using Bonjour protocol and Canon Driver.
Downloaded the latest drivers from the Canon website for OSX v10.6 and installed the package.
Only one of the iMacs will print/scan successfully.
The other two throw this error:
Error: /Library/Printers/Canon/CUPS_MF_Printer/Bins/capdftopdl failed
So I called Canon and they walked me through removing and reinstalling the driver - of course with the same error result - so now they are telling me to call the computer manufacturer(Apple) for support for a corrupt driver (huh?).
Any ideas on how to get rid of this error and get the printer work?
Thanks.

hey, I tried what you said, but no luck, still getting the same error. Did you do anything else
The problem was under advanced networking -
there were entries in the Bypass Proxy Settings for these Hosts & Domains -
I removed the entry *.local, 169.254/16 (not needed) and that's all it took. Hope this helps someone else.

Trying to add Canon MP500 printer via Bonjour; get Error -9672

I have my Airport Express hooked up to my Canon MP500 printer. My computer recognizes the Airport Express. I go to Print & Fax in System Preferences and try and add the printer via Bonjour - it stalls and then displays Error -9672. I have had this printer hooked up successfully before. Any suggestions? Thanks.

From HP Support
Reset the device when it is not functioning properly.
If the device is not functioning properly or to clear memory, reset it.
On the operator panel, press and hold the <ON/OFF> button for one second. (The display will go blank.)
Wait approximately ten seconds and then press the <ON/OFF> button again.
Wait until the device has completed its cycling process before submitting another job request.
A number of site online mention problems with different brand printers on intel macs. Some have correcedt the problem by downloading an older driver that that which came with the computer.

Fix for Canon 6C10 printer error. Permanent solution!

Ok, don't try this video if you don't know what your doing. This requires technical knowledge. I'm not responsible.
I finally found a solution to the Canon 6C10 purge unit error/service, which my local repair said that they need to replace the purge unit. Anyhow, from the looks of it, it seems like a design flaw of Canon but lets not be harsh about it. I made a video on how to fix it. Canon printers are great!
http://www.youtube.com/watch?v=-0tb07N1dIo

Brilliant! Thanks very much Chirantha, I have a MG5350, it doesn't have the switch you pointed at but I cleaned the wiper and operated the cam & it worked just great.
Thank you,
Colin

Unable to load Canon MP160 printer driver

I've had the hardest time using my Canon MP160 printer on my iMac (Mac OS 10.5). In fact, I'm not able to print at all.
I have the printer connected via USB. It always has been. However, it only stopped working recently.
I downloaded the drivers for the printer and scanner from Canon's web site. However, when I attempt to load the printer driver, the "Installing Canon IJ Printer Driver" window appears. It gets to the "Finishing Installation" part in the process. But it "hangs" at some point and does not complete. I've tried it twice. It hung at two different points in the process. I tried letting it run overnight. That was no good.
I've also looked for the "Printer Setup Utility" and can't seem to find that anyplace. I'm wondering why I can't find that.
If anybody could help me solve this, I'd be so thankful.

Hello marconi10. Welcome to the HP Forums. I understand you are unable to install your printer on one computer, over a wireless connection. I'm going to suggest a very simple workaround, which if it works, will remove any complicated troubleshooting that would be necessary:
Please try installing the printer with a USB connection. If this does not work, you know that there is an issue occurring with the computer.
If this does work, the printer will be successfully installed. At that point, you can change the connection type from USB to wireless. For more information on how to do this, please reference this HP document: Convert from a USB connected printer to wireless
If the printer will still not connect wireless, this will point out a computer issue. For additional information and troubleshooting, relating to the inability of installing the printer over a wireless network, please reference this HP document: 'Unable to Find Printer' Error Message Displays on the Computer During Wireless Network Installation
Please respond with the results of your troubleshooting. I'm only here to help!
Mario
I worked on behalf of HP.

Canon i560 printing scale error

Similar Messages

Maybe you are looking for