Canon MP610 scanner software freezes when scanning on my unibody macbook pr

So my scanning function has been fine until i upgraded to the new unibody macbook pro. I"ve gone to the canon site and downloaded all the software and drivers and it's still doing it. I'm so frustrated with this, if anyone has experienced the same issue or know about it, please help!

Hi John. Thanks for that input. At Step 6, after clicking "Next" I get a window telling me my OS version is unsupported and the installation may not complete. I am prompted to go to Canon's web site to "Check Latest Info".
I've had this window on previous attempts and from Canon's web site I downloaded two drivers as follows
- ICA Driver V4.0.0
- Canon IJ Network Tool V4.5.0
I'm not sure if these are the correct / complete drivers I need for this install or not.
I continue to follow all the steps. At step 9 I click "Wireless Set Up using USB" amd get a License Agreement (a little different than instructions)
I click "Agree" and it goes to a Setup window with two progress bars showing the installation. I've not been prompted to connect the USB?
After the Setup window is done, I am then prompted to connect the printer via USB. I connect the printer and click on "Redetect". It is not detected.
I then try following the Canon on screen instructions for connecting to the wireless LAN amd enter the password. It searches and indicates "Connecting" on the window, but it never connects and the blue light just blinks
So, at this point I am stuck??
Thanks
Stephen

Similar Messages

  • Need advise, I have purchased compressor 4.1 to compress my movie file, particularly MKV files. Problem is, that the software freezes when trying to import the 10GB MKV. Any one that can help?

    Need advise, I have purchased compressor 4.1 to compress my movie file, particularly MKV files. Problem is, that the software freezes when trying to import the 10GB MKV. Any one that can help?

    Afraid Compressor won't work with MKV. If you have access to a system running an earlier version than Mavericks, and with Perian installed you can use MPEG Streamclip or Quick Time Pro to convert to a mov.
    Russ

  • Itune freezes when i connect iphone on macbook pro

    every time iTunes freeze when i connect iphone or iPad on my MacBook Pro
    please advice what is to be done to repair it.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Acrobat Standard 8 freezes when scanning

    I have been using Standard Version 8 for 4 years, scanning and saving multipage documents, including graphics and text.  Now it freezes after sending 12 pages through the scanner and before getting the dialog to choose between adding more sheets and finish scanning.  I think it will scan a one page document, but I don't know where the cut-off is as far as page numbers, if that is the issue.  Now I must end the process or the process tree and I don't know if that will create further problems.
    I have just uninstalled and reinstalled the program and have the same issue.

    Hi,
    I'd like to clarify some points. You use a digital ID to create a digital signature, not unlike how you use a pen to create (what we refer to as) a wet ink signature. When it comes to applying a digital signature to a document, you can sign just about any blob of electronic data. You can sign your e-mail or a MS Word document as well as a PDF file. The signature itself lives either in the document (that's how Acrobat does it when signing a PDF file), or it can be an external attachment (that's what the smime.p7s file is you might see attached to some e-mail messages).
    Here is where I'm a bit confused. How many digital IDs do you have access to? If you only have one, does it cause Acrobat to lock up when signing a specific PDF file or when you try to sign any PDF file? Same question if you have more than one digital ID available to sign with, they all cause Acrobat to lock you when signing just one specifc file or any file? When you try to sign, are you signing an existing signature field, or are you creating a signature on the fly, be it either visible or invisible? If it is just one file that is causing the problems then that file is probably corrupt. If it's any file then it is a more systemic problem and I don't have an off the shelf answer for you.
    Steve

  • Scanner software opens when iphone connected

    Hi all.
    Ever since I have had my iphone3gs, when I connect it to my XPpro PC my scanning software opens. (takes ages coz itunes opens at the same time) I have been into control panel / Scanners and cameras / properties of the iphone and disabled it but when I reconect it changes the settings back again. I have the latest itunes and phone software updated as of today from the apple site and it still does it. Can anyone help please.
    Thanks in advance

    Open iTunes and go to Preferences.
    Select 'Devices'
    Uncheck the option 'Prevent iPods, iPhones and iPads from syncing automatically'
    Click 'OK'
    Go back to the  iPods, iPhones or iPad settings. The 'Open iTunes when this device is connected' is enabled.
    Uncheck 'Open iTunes when this device is connected'
    Go back to iTunes Preferences
    Select 'Devices'
    Check the option 'Prevent iPods, iPhones and iPads from syncing automatically'
    Click OK
    IMO this is a bug. A user shouldnt have to jump through hoops to stop an iDevice from auto syncing or opening iTunes.

  • Canon MP610 scanner

    As of 2.40 pm (Cdn) customer support confirmed that the Navigator 1.0.4 will not work for the MP610 with Leopard and to wait for an update.
    I wonder how much longer.....
    As of the CD Label-print software available at Canon.UK: not for Canada (in other words, in the UK an MP610 owner can print directly on CDs but not in Cdn and possible not in the US).
    Alain

    I have the Canon MP600, so yes, we just have to wait for the update.
    It should be pretty soon, so keep checking back.

  • ARD 3.3.1 Administrator software freezes when selecting color image quality

    I have a lab of 35 Macbooks and when I try to observe them all at once using a higher image quality in color, it freezes or slows down so much I have to force quit the application. The only way I am able to observe and select one of the stations is when I choose black and white. Is there a workaround? Does anyone have the same issue? Thanks

    I think I've solved my problem with a Google Search. I came across a free slide show generator
    (contributions requested) that shows much higher quality slide shows than either iPhoto or Aperture 3.
    You click on a folder of jpegs and it almost immediately generates thumbnails and within a few seconds
    I can be viewing a full screen, tack sharp, slideshow of all of the files in the folder. Much sharper than
    I'm used to seeing.
    I think I'll keep the Aperture 3 and use if for the purpose it's intended for in the future. I'll also redo the
    image preview files to the small size it started with and then I'll copy all of the files I'm interested in from
    iPhoto into a separate folder on another disk. I'll use Aperture to catalog and to perform image manipulations
    on but I won't try to use it as an iPhoto replacement. I don't think I'll be using iPhoto much as an image
    viewer in the future either after I finish moving my favorite pictures to the Phoenix Slides folder.
    The name of the free program is Phoenix Slides. It's free to download and try, free to keep (though I
    think you'd want to pay the small amount requested) and fast. My pictures have never looked so good
    before.
    http://blyt.net/phxslides/
    Message was edited by: Jimbo2001

  • Change folder that scanner saves to when scanning from printer

    Just got an OfficeJet 8600 all in one, and it appears that when you use the scan button on the printer's control panel to scan, by default it saves the files into your My Documents folder.  Is there any way to change where it saves to?  I'd prefer if it would save to my Scans folder that is inside My Documents, but dont see an option anywhere to change that, so not sure if that is even configurable.

    Hello rr2222, On my OJ 8600 Pro Plus setup - yes, the two "destinations" ... scan from printer and scan from PC ... become aligned to the same folder, once the destination folder has been setup just once using the (Windows) Control Panel icon. Although I need to take a slightly different 'path' through my HP-installed Control Panel shortcut from that described by ShlomiL in order to find my "Scan dialog", once I've set a preferred "Save location" for each of the "Scan to JPEG" or "Scan to PDF" etc. options (using the 'Advanced' link that's alongside them on my Scan dialog), back at my printer I can now choose "Scan" then "Computer" then [one of my named PCs on the list] ... and I can then select one of the same "Scan to JPEG" or "Scan to PDF" etc. options - and the scanned file pops up in my chosen folder on my PC. Hope that helps a bit?Colin P.

  • BB Desktop Software freezes

    The desktop software freezes when it has synced 476 of 707 records.  I have removed and reinstalled the software again-and-again, I have used another computer to try to sync with the same results, I have run a full virus scan (Kaspersky), I have sent-in the phone for repairs and nothing.  It still freezes at the exact same spot.  Someone please advise!

    I have the exact same problem I need help too

  • After Lion update sometimes softwares freeze

    I upgrade to Lion before two weeks,  and I see that some softwares freeze when you want to open it, or close it.  Sometimes iphoto, or Adobe products freeze.
    Last night, when I shut down the computer, it waited 20 minutes, and not shut down.
    Does anybody experience such things after Lion upgrade?

    If there is insufficient disk space, Spotlight hasn't finished indexing, or I'm using an older incompatible version of the software this can happen.  See my FAQ on upgrading*:
    http://www.macmaps.com/upgradefaq.html

  • Canon quick menu software does not recognize scanner for MG5520

    Hi,
    I have Canon Wireless Inkjet Photo All-In-One printer (MG5520).  I have installed Canon complete software.  But the quick menu does not recognize my scanner.  In Preferences only Printer is listed, but for Scanner nothing is available.  Could you please suggest how to get scanner as well for my device?
    My OS is Windows 7.
    Regards,
    Sharath.

    Hi sharma_swp,
    Reinstalling the drivers for the printer from the Canon USA website should provide the scanning option on the Quick Menu. Please click here to go to the Drivers and Software page for the PIXMA MG5520.  Once on the initial download page for your model, please do the following:
    1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
    2. Next, please click on the red arrow next to the "RECOMMENDED DOWNLOADS" section and click the FULL DRIVER AND SOFTWARE PACKAGE file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
    Once the file has been downloaded, please double-click on it to reinstall the drivers and software on your computer, then restart your computer.  If you still have difficulty with the Quick Menu showing items related to scanning, please call or email us using one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • [LaserJet Pro 200 color MFP M276nw] only vertical lines when scanning, scanner broken?

    Hi all! I have a problem with the scanner in my HP all in one. If I scan (using the printer function or apples ImageCapture: same result) the output is just a lot of vertical stripes (in colors when in color mode). Not a trace of the image I try to scan. The lines are there even if i scan an empty white page. I see the stripes both when doing a preview scan and an actual scan. The problems are very similar regardless of if I use the flatbed or the feeder scanner (they are separate scanner hardware, yes?). I have updated to the latest software for the printer/scanner and I am connecting over bonjour via wireless. I am on Os X 10.9.1. Anybody having similar problems or is my scanner just plain broken? Thanks in advance!Jon

    , , I understand that both of you are seeing vertical lines when scanning from your Laserjet M276nw. First, make sure the printer is plugged directly into a wall outlet and not a surge protector. Now, so I know where to begin I'd need to know the following:If you are seeing the vertical lines when you copy as well as scan?Are you seeing the vertical lines when you copy from the flatbed? The document feeder? both?If you are seeing the lines from both the flatbed and the feeder are they in the same place?Once I know this I'll be better able to assist you.

  • Unable to install a software driver for Canon film scanner on mac OSX 10.6

    I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.
    I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • I just upgraded to a new iMac running OS X 10.8.2 and can't scan from by Brother MHC 7820N.  Printer works.  I reinstalled the scanner driver but when I try to scan, the scanner doesn't connect to the imac.  Image Capture says no scanner connected.

    I just upgraded to a new imac running OS X 10.8.2 and am having trouble scanning from my Brother MHC 7820N.  Printer works fine but the scanner won't connect to the imac.  I reinstalled the scanner driver from Brother.com but no luck.  When I go to Image Capture, it says no scanner connected.  Any suggestions?

    You might try a third party scanner software. Printer manufacturers are terrible about keeping their products updated. I'd recommend VueScan, you can get a trial version here and if it works and you like it you can purchase it.
    http://www.hamrick.com/

  • Downloaded Canon printer/scanner drivers for Canon PIXMA MP520 and MX860 on Mac Book laptop, and they worked.  However, when I downloaded the same two drivers on Mac Book Air, neither worked.

    Downloaded Canon printer/scanner drivers for Canon PIXMA MP520 and MX860 on Mac Book laptop, and they worked.  However, when I downloaded the same two drivers on Mac Book Air, neither worked.

    I wasn't aware that VueScan charged a yearly license.
    You simply launch Image Capture and if the scanner is recognized it will be listed in the SHARED list in the left display column.  Select the scanner name and the app will start an overview scan.  You will also see a list of scanning options in the right display column (resolution, paper size, file output format, etc.
    The above description is when everything is working correctly, which has been the case for me.
    Good luck.

Maybe you are looking for