Canon MX870 is not detected by Yosemite after new driver installed

I just downloaded and installed the new Canon drivers from their website that are supposed to support Scanner/Printer functions for my MX870 with Yosemite, but when I go to Settings for Printer/Scanner and try to add the printer from the wireless network, the computer does not detect it.
Anyone know what else I can do, or if I'm doing something wrong here?

Hi JordoGelbo,
Thanks for visiting Apple Support Communities.
If you are trying to set up a printer wirelessly, first take a look at the guide found at this link:
OS X Yosemite: Add or remove a printer
You can review the steps in the "Add a Wi-Fi or network printer" section to make sure your printer is being properly set up.
If the printer is still not visible, the section called "Add a network printer by its IP address" can be helpful.
For more troubleshooting tips, see the advice at this link:
Troubleshooting printer issues in OS X - Apple Support
Best Regards,
Jeremy

Similar Messages

IWork is not working on Yosemite after a fresh install from the disk

Hi,
I've freshly install yosemite on my computer.
I first reinstalled my computer with original Snow Leopard and then made the upgrade to Yosemite.
After that I used the Migration Assistant to transfert my old applications.
Most of them are now running perfectly but I'm still facing issues with iWork.
It refuses to launch with a message error saying that "Pages" for example is not working with this version of Mac OS and I should make al available update.
There are indeed updates available from the App store but I can't download them because it is not available for my apple ID because someone else bought it or I cancelled the buying ?!
It's strange because I bought it with my Macbook Pro in 2010 and even after a fresh install from the disk, the message is still the same...
Any idea how to unlock these updates?

Actually this doesn't explain everything.
I finally reinstalled Snow Leopard / iWork 09' and then upgraded to Yosemite and everything is working like a charm.
This issue has something to do with the use of the "Application migration tool" from Mac Os X Yosemite to collect old applications to the new os from another installation...
I solved my issue this way because I don't have very valuable applications that I want to transfert but for other users, this could be a real issue...
Thanks a lot for your answer

Canon lide 210 not recognized in yosemite. Latest driver downloaded

Since upgrading from Mavericks to Yosemite (10.10.1) I have lost capability with my Canon Lide 210 scanner and Jam XT bluetooth wireless speaker.
I have downloaded and installed the latest Canon driver to no avail. Any ideas? Both were working great before I upgraded to Yosemite.

The scanner driver file is installed in HD > Library > Image Capture > TWAIN Data Sources. Here you will see the LiDE210.ds file. This package file contains information used by the scanner and removing the scanner entry in Print & Scan does not remove this file. You could trash this file (make sure you remove the entry from Print & Scan first) and then run the v17.7.1 scanner driver installer again.
If MP Navigator still fails it could actually be this application rather than the scanner driver at fault. Note that Image Capture uses a different driver called an ICA. So to test that the TWAIN scanner driver is okay you would need a TWAIN compatible application. And one such application is VueScan. Install this and see if you can scan without any error. If you can then it indicates the issue is with MP Navigator. If VueScan also fails then you do have a scanner driver issue.

HP C7200 printer/scanner not working with Mac after new router installed.

I recently had my DSL modem go out and replaced it with a combo modem/wifi router. Since the install, my mac can't detect my printer. If I install it via the printer's IP, it'll detect ink levels for a day or two, but still won't print, and won't even detect the scanner. It says the printer is off-line when I try to print. I've rebooted everything, reset the printing system, downloaded updates, and downloaded the latest HP software. Nothing helps. So much for "just works".
My little Windows 7 computer was totally trouble-free after I reinstalled the printer.

If the printer does support Bonjour and it does not appear in the Default Add Printer view then I would say that the Mac is set to a different subnet to the printer (and the Win7 PC). This could also explain why you can add the printer via IP but it won't print.
If the Mac is definitely on the same IP subnet as the printer then check you don't have an application running that could block Bonjour.
With regards to IP queues, ensure you select HP Jetdirect rather than the default of IPP (Win7 will be using Jetdirect which is known as Port 9100). Also, some drivers cannot be used with network connections. If the printer supports Postscript then try a Generic Postscript printer to test. If it doesn't support PS but supports PCL then there is a Generic PCL Laser driver you would try.

Cannot back up with Time Machine/Capsule after new drive installed in MacBook Pro

MacBook Pro 2.53 GHz Intel Core 2 Duo running 10.8.5.
I just had a larger hard drive installed by Tekserve. This is to be my first back up since installing the new drive. I have 2 back ups: one to my Time Capsule via WiFi, the other to an external Le Cie via USB.
Time Machine just gives me preparing to backup but goes no further, just stuck in that mode. I suspect that it can't find my old drive, which it backed up till now. But I cannot find a way to correct this possible snafu. I do not see an option in Preferences.
Any thoughts?
Thanks

Just so we are clear.. were your files all recovered from backup after the install of the disk?? Did you supply one of the backups to the company who did the installation so they could do the recovery?
You do want to be careful not to damage the old backup.. it might really be better to start over a clean new backup.
TM should be reset. It sounds like they did recover your settings.. Please check Pondini here.
A4 http://pondini.org/TM/Troubleshooting.html
Also use A1 to check what the log is saying about TM.. the old backup will need to be fully indexed and checked if you intend to keep using it.. and that will take several hours to the TC if you use wireless.. The problem people expect fast starts but that is not possible unless you are doing a new backup.
You can also check some of the other help files there eg D1 long preparing for why that happens.

Mac Pro refuses to boot after new drive instalation...

Hi
Could anyone shed a bit of light on my problem - Ive just got a new 500gb seagate drive, - when I load it up in order to format, im faced with a blank screen, and os x refuses to even think about booting up - there is also an odd click which Im guessing is the boot drive trying to start.
The new drive slots into place fine, and I made sure I was earthed out before touching it...
When the new drive is taken out, the system starts up without a hitch.
Do I have a duff drive? - or am I missing something blindingly obvious?
Thanks for any help
Maxine.

Hi,
Funny that I saw this message, I am the person that had the exact same problem on the 20th of December.
After trying to install the HD, I had the problem as well. I ended up taking the computer in to my local Apple store, and they kept the Mac Pro.
It is now January 5th and I still do not have the system. Called them an hour ago and they said that the part (they didn't mention what it was) was on BACKORDER, so they had to decide if they were going to wait for the part or give me a brand new system. Hmmmm.... Could this be a NEW hidden problem for the Mac Pro now?
I wanted to purchase an iMac, but was afraid of the lock-up issues. I am starting to regreat my choice and wish I had got an iMac, at least I would have some kind of file server for my network
All I can suggest is to take it in to your local Apple store and let them check it, and then ask if they could fix it right then, or you two could have a system that's not able to be workable.
-Dan Uff

HP printer 5510 not printing black ink after new cartridges installed

having an issue with the black ink not printing at all..Brand new HP cartridges. cleaned screen with hot water vent is open

Hi 6043kmb,
Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5510, you are unable to print in black ink after replacing the cartridge.
I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Why can't I re-install CS4 after new drive installed?

I had a hard drive crash. Had a new hard rive installed at computer repair store. Had any recoverable files installed on new drive. Removed any remaining CS4 files recovered. Went to re-install CS4 and it won't install.

Run the cleaner tool and try again:
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Mylenium

Iphone device doesn't show up on the side bar after new driver installed. How do I fix this?

I had to install a new drive into my laptop. When I tried to download an audible book into my Iphone the device doesn't show on the side bar anymore. When I try to sync it from Itunes it doesn't do anything either. Any suggestions on how to get my phone device back on the side bar?

itunes/presentation/ show side bar

Iphone 4s not detecting in iTunes after ios 7.1.2 upate

My iphone 4s not detecting in iTunes after ios 7.1.2 update, please help
regs
sk

Can you try to connect to another computer?
DFU mode would be the last thing to try before contacting Apple Support or visiting an Authorized Apple Service Provider or Apple Store.
iPhone - Contact Support - Apple Support
iPhone, iPad, or iPod is not recognized by Windows due to driver installation issues

I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.

I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.
I am running Mac OSX 10.4.11. According to the System profiler the CD/DVD drive is a "PioneerDVD-RWDVR-112D." When I compare the information under this heading, the only unusual difference from my iMac is that the G5 reads "Burn Support: Yes (Unsupported)." My iMac reads "Burn Support: Yes (Apple Shipping Drive)."
Under the System Preferences the options are set to "Ask what to do" when a blank CD or DVD is inserted. Music CD set to open iTunes, Picture CD set to open iPhoto, Video DVD set to open DVD player.
Do you have any suggestions?
Thanks, Jack

Hi Jack, great help so far!
Internal...
http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html
External be sure it's Firewire & not Bus powered...
http://eshop.macsales.com/shop/firewire/optical-drives/

HT3917 My apple wireless keyboard is not working after new batteries installed

My apple wireless keyboard is not working after new batteries installed.

Do you get a steady green light to say there is a connection. If not, are the batteries the right way round. Do you have a monitor to tell the batteries strength. Is there a reading. Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

Has a fix been developed for the problem with trackpad not scrolling in mail after a Maverick install?

Has a fix been developed for the issue with Trackpad not scrolling in Mail after a Maverick Install?

"Fix?" To my knowledge there is no widespread problem (I have none myself).
Barry

Registry edit Apple requires is causing windows to not detect files on the DVD drive

Registry edit Apple requires is causing windows to not detect files on the DVD drive. If I set up the registry it requires then the files will not be dected & if I do it the way windows requires then the files will be detected but ITunes will not be able to use the optical drive. Is there any kind of patch or something someone can help me with?
Thanks O'Bie

To fix registry, refer to this article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

Bootcamp 'Glowing' windows logo freeze after gfx driver install

Bootcamp 'Glowing' windows logo freeze after gfx driver install
Last week suddenly, after having changed or installed nothing, trying to boot into windows resulted in a frozen glowy window logo 'Starting Windows', which resulted in having to format the windows partition.
Since then I've found out that I can do everything except install gfx drivers.
I've installed firefox, all bootcamp drivers except gfx, swtor (doesn't run of course, but installs fine), quicktime, rebooting is fine after all this...
But as soon as I install any kind of graphics driver and reboot, it freezes at the glowy window logo.
I have tried;
The bootcamp included gfx driver
Windows Update included gfx driver
Official nVidia latest beta driver
Official nVidia latest whql driver
Official nVidia oldest whql driver
nVidia Cuda driver, both versions
All give the same result
I have formatted the entire harddrive and written zeros and made the windows partition in a physically different location to make sure it's not a harddrive issue, no luck.
I have tried both Windows 7 x86 and x64 with matching drivers, same results.
Tried booting with no devices attached, no luck.
This all seems to me like a bust gfx card, were it not that under Lion everything works fine, even gaming (WoW).
Techtool Pro's test machine shows no errors.
My machine is a;
iMac
24-inch, Early 2008
Processor 3,06 GHz Intel Core 2 Duo
Geheugen 4 GB 800 MHz DDR2 SDRAM
Videokaart NVIDIA GeForce 8800 GS 512 MB
Software Mac OS X Lion 10.7.3 (11D50b)
Hardwareoverzicht:
Modelnaam: iMac
Modelaanduiding: iMac8,1
Processornaam: Intel Core 2 Duo
Processorsnelheid: 3,06 GHz
Aantal processors: 1
Totale aantal cores: 2
L2-cache: 6 MB
Geheugen: 4 GB
Bussnelheid: 1,07 GHz
Opstart-ROM-versie: IM81.00C1.B00
SMC-versie (systeem): 1.30f1

I am running Lion on a Mac Mini Server wherein I placed a Bootcamp partition and installed Windows 7 Ultimate. I've been testing Windows Media Center using a CableCard Tuner installed in a SiliconDust HomeRun box.
All was well until I received a Windows notification of an NVIDIA driver update. After the update, I now freeze at the same point that you do in the Windows startup splash screen.
I rolled back the driver using the Windows control panel associated with the device. Still freezes.
Windows repair does not have a fix. I can't get windows to start in "safe mode" so I can remove the additional apps that NVIDIA installed during the update.
I'm certain the freeze is associated with the NVIDIA driver.

Canon MX870 is not detected by Yosemite after new driver installed

Similar Messages

Maybe you are looking for