Canon SX50 HS viewfinder darkens when outside

I recently purchased a refurbished SX50 HS directly from Canon. When using the viewfinder to take pictures outside it seems like it darkens or dims...when taking pictures inside it looks fine.
Is this normal behavior? I'm talking about the viewfinder you press your eye to, not the LCD screen.
Thanks!

I too just recently purchased a refurbished SX50 so my response is not one based on complete familiarity with the camera. However, ...
If there is a DOF preview setting on the SX50 I am completely unaware of its existence and cannot find any reference to the feature in either the menus or the owners manual. Since you've made it clear the issue is with the viewfinder (the piece you press to your eye), the response regarding the LCD doesn't seem to provide any assistance.
In my short experience with the SX50 I have not perceived any change in the EVF's brightness/contrast when shooting in bright light or indoors. It might, though, change somewhat with the angle of the EVF's screen to your eye. Just as you would see if you altered your position to a LCD television, the amount of light hitting your eye will change as your eye moves further off axis. That's not a very good answer I understand since we would assume you are placing the EVF in the same position whether you are indoors or not. That is, though, my best explanation at this time.
I have noticed the LCD and, I believe, the EVF will change as exposure compensation is adjusted. Is it possible you are adjusting the EC for the brighter light found outdoors? What shooting mode are you working in?
I suspect you'll have more responses and maybe find a better answer. If not, contact Canon with your question. One reason I've stayed with the brand over several decades is their consistently good customer service.
Good luck.

Similar Messages

Viewfinder on Canon SX50 HS darkens or dims when using outdoors?

I recently purchased a refurbished SX50 HS directly from Canon. When using the viewfinder to take pictures outside it seems like it darkens or dims...when taking pictures inside it looks fine.
Is this normal behavior? I'm talking about the viewfinder you press your eye to, not the LCD screen.
Thanks!

Hi 2tango2!
Thank you for posting.
Since the viewfinder is electronic, it is basically a tiny LCD displaying what is captured by the image sensor. When you go outdoors in brighter ambient light, it may appear that the viewfinder darkens, but the brightness of the viewfinder is something you can adjust in the menu. To do this:
Make sure the viewfinder is active using the DISP button, if not already.
Press MENU.
Select the TOOLS tab.
Select LCD BRIGHTNESS.
Adjust it using the LEFT and RIGHT buttons.
Brightness of the viewfinder and of the LCD on the back of the camera are adjusted separately, so you can always leave the LCD where it is, then keep the viewfinder a little brighter.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

When using a Kapaxen ACK-DC80 AC Power Adapter on Canon SX50, How do you close battery door?

Kapaxen ACK-DC80 AC Power Adapter with Canon SX50.
How do you close battery door so camera will function?

Look closely at the top edge of the battey compartment. There is a little flap type door that folds down and allows the wire to pass through and the battery compartment to close

Canon SX50 Bird & Wildlife Gallery

Happy New Year,
My Canon SX50 continues to provide hours of enjoyment and trouble free performance. I strongly favor portrait style images of birds & wildlife and I wanted to share my latest collection of images.
Heath and Happines and great photos, of course, in this new year!
Best regards,
Tony
Canon SX50 Gallery
"My wife & I make the perfect point-and-shoot photography team. She points and I shoot!"

Amazing gallery, I just got a Canon SX50 which is stressing me out because with the video I can't get rid of the noise. I don't have any on a sunny day outside, but when I record inside it's everywhere I even bought LED 40watt Bulbs and a portable LED light. Do you have the same problem or know the solution?

Connecting the canon SX50 to HDTV for video playback???

Connecting the canon SX50 to HDTV for video playback???
ok, Got this Camera, like it, except for a few confusing issues. I was told, in order to playback HD video onto my HDTV Samsung, with an HDMI4 on the left side of the TV, all I needed was a HDMI to HDMI cable.
(#1) Shut off both TV and camera, plug the cable into this HDMI plugin, turn on the TV and Camera power supply, and it should recognize, then start paying.
Well, I did it both ways, (#1) shut off,then turn on, and (#2) I just inserted the camera's HDMI to the HDMI4 while both were on, and tried opening up the Samsung's' Tools >Inputs, etc, and still nothing!
Is there an easy way to accomplish this?
The second issue i'm having , is how to shut off the slow motion playback, when viewing the videos, which were not recorded in slow--mo, and it's frustrating trying to playback in normal speed, but instead it plays in slow-mo.
I'm not quite sure I'm recording in full HD...The payback is only 60i

Thanks grazie!
Well, i accomplished most of that and at least got the video on the display (Samsung Anynet HDMI3) But no sound!
I was also able to control the SX50 TV Display with my samsung remote, kool.
As far as the playbgack volume, I checked the camera, I did notice the OPERATIONAL SOUND was off, but when I played back the video on the camera itself, i did have volume.
On that subject of Slow motion videos, if i'm watching each video, then see one playing back in slow-motion, does that mean i actually filmed it in slow motion, without knowing? ( i can send it through Pinnacle Studio 15HD and speed it back up, but theres no background volume anyway) if i did unknowingly videotaped in slow motion, i bettter be more observant in the future.
I'm going to increase that ''Operational sound'' on the tools / Camera and try to playback to see if I have any sound.
I have a Yamaha 7.1 reciever, and TV, BD player,Time-Warner cable all is connected to this receiver....I was pushing all buttons for inputs to see which one would work for sound with video, but could not find any. Thanks, or grazie grazie!

How can I best load RAW images from a Canon SX50?

How can I best load RAW images from a Canon SX50?

9Sorry, ........confused about this process. When I attempted to Post the question I had entered, I was told a blank space could not be posted. So, I reentered the Q in the "space"........ which apparently was the space for an answer....!! ??......)
> When I try to load RAW images taken by my Canon SX50 from the SD card, iPhoto 11 - (iMac/OSX 10.6.8) tells me that it can't read the format or something like that. OSX 10.6.8 came out before the SX50, thus, did not include the related program. I want to shoot RAW on the SX50....... but I then want to load them into iPhoto....... which I do directly from pics I take with my Nikon D200.
Not sure if this will help.............

Canon SX50 Raw and PSE 11

I was told by Bradshaw, the online Adobe Chat Rep, that PSE 11 would fix the problem I have in PSE10 of editing Canon SX50 HS Raw files. I also read on DPReview site that I could download and Install ACR 7.3 and it would fix the issue in PSE 11. It won't install. Anybody got and answer to this challenge.

Your camera gets support in version 7.3 which is out of beta testing and now available as a release candidate. You may want to wait for the final version of camera raw 7.3 which will be available shortly. Alternatively download the release candidate now but make a note to update when the final version is released.
Adobe Labs Downloads click here DNG Converter 7.3 RC
You can convert a whole folder of CR2 images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

How to fix noise problem with Canon sx50 HS

I'm wondering why are all of my videos I record with my Canon sx50 HS so noisy as in fuzzy not sound. No matter how I change my Aperture, Iso, Shutter speed, it still doesn't make much of a difference. I still see noise throughout my videos. I have a room where my lights are good, 75 volts and I still can't get rid of it. Can anyone personally help with this issue?

For starters, I don't know how good of video is possible with the sx50. It's a compact camera, so there will be limits.
As to the noise and/or fuzziness. Depends on if it's noise, or fuzziness, but I suspect both would be caused by the same thing - lack of light. Photography/videography takes a surprising amount of light. When you're indoors you need a surprising amount of bright lights for good picture. I'm not sure what you mean by 75 volts, but a 75 watt light isn't bright at all, not for a camera. How does the video look if you shoot outdoor?
If a camera doesn't get enough light it's going to do three things - open up the aperture, raise the ISO, and increase the shutter speed. Raising ISO adds noise, plain and simple. Opening the aperture can reduce the amount of the photo that will be in focus, making things look fuzzy. And increasing the shutter speed can allow movement to show, also making things fuzzy. Without seeing your video it's hard to speculate which it is.

Canon SX50 HS fisheye distortion

Greetings,
I recently bought the Canon SX50 HS as an addition to my Canon Rebel but upon shooting with it, I found at the widest angle, there is a fisheye distortion to the shots with the corners rounded like an old photo. I tried with my Corel PSP 7 to correct the distortion but it only made the shot worse. I'm not new to the field but I can't understand why the camera is performing like this. I used my Canon Rebel XTI for years without this much trouble. Please tell me what I'm, doing wrong.

My first question would be how close are you to the subject in the shot when this occurs? Are you doing a macro at the wide end? This will certainly cause a fisheye effect with that small sensor in the SX50. I get that with my SX150 as well, so I've resorted to zooming in on macros to avoid that.
Now, if this is occuring in wide angle landscape shots, then there may be an issue with the lens on that camera, assuming you're not using a fisheye setting/scene mode. It may be that the lens is not properly aligned and is getting out of the "sweet spot" of the lens at the wide angle. It may need to be returned for another camera. This is not the norm, however, so if there's a way to compare your results with someone who has that model camera, I would check that out first to see if anyone else has that issue.
Steve M.

I am running a MAC Yosimite 10.10.1 (latest) and have just updated Lightroom to 5.7 to allow me to manipulate files from my Canon 7D mark 2. When I go from Library to Develop there is no basic adjustments available? Help Please?Ray Wood

I am running a MAC Yosimite 10.10.1 (latest) and have just updated Lightroom to 5.7 to allow me to manipulate files from my Canon 7D mark 2. When I go from Library to Develop there is no basic adjustments available? I have a histogram but no access to the basic controls as per normal.
How can I get to these?
Help Please?
Ray Wood

See this:
Missing Panels/Modules - Lightroom Forums

I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothi

I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothing. Please help! This problem only started a few days ago on lightroom 3.6, upgraded to 5.5, but still not working. Thanks.

Can you see the Canon EOS camera and image files using Windows Explorer? If not disconnect the camera, close all applications' shutdown Windows, and TURN OFF the power to your system and ALL connected devices. Disconnect all phones, iPads, and any other USB devices and restart your system.
Retry Windows Explorer and see if your camera is showing. If so try LR import again.

I have a Canon Pixma MX 880 and when I try to change or delete photos on my SD card,

I have a Canon Pixma MX 880 and when I try to change or delete photos on my SD card, I get the following error:
"You need permission to perform this action" and below that:
"You require permission from the computer's administrator to make changes to this file".
Printer is set up wireless.
I am signed on as administrator, can't get access with any user account.
The old problem ridden HP Photosmart I replaced, I could change, delete, etc. without issues.
Solved!
Go to Solution.

hi ehnco,
It sounds like the Read/Write attribute on the printer needs to be changed. Use the following steps to change the read/write attribute:
Make sure that the machine is turned on
Press the <Setup> button.
Use the   button to select  [ Device settings], then press the <OK> button.
The Device settings screen is displayed.
Use the  button to select [Device user settings], then press the <OK> button.
Use the  button to select [Read / write attribute], then press the <OK> button.
Use the  button to select [Writable from LAN PC], then press the <OK> button.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HT203088 I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that?

I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that if my camera is listed under the supported digital cameras for OS X YOSEMITE?

Put simply, the minimum system requirements for iTunes have changed. You need a Mac running at least OS X 10.6.8.
It's best you look online to see if your model of Mac can be upgraded to at least 10.6.8 "Snow Leopard". It should still be possible to order a copy of Snow Leopard if so.

Canon SX50

I'm running LR 4.4 with Windows 7. Apparently, the Canon SX50 has been supported since LR4.3, but it doesn't appear as an option in Lens Corrections under Lens Profiles. I'd expect it to be among the Canons, after the lenses and among the other Powershot cameras.
Thanks,
Bill

Supported means the raw file format is supported. Lens corrections are a whole other matter. Many fixed-lens cameras are supported inherantly but don't show up in the lens corrections panel simply because the lens can't be removed and replaced.

I no longer can download photos from my Canon SX50 HS to i-photo

I had been downloading photos from my new Canon SX50 HS routinely for several weeks and then they no longer downloaded. I-photo would not even connect to the camera. I have spent considerable time removing various files and downloads but still the camera does not connect. Any ideas?

Does Image Capture (in your appications folder) see the camera
If it does then use it to get the photos off the card - it not then you need a card reader - once you get the cards off the memory card then use the camera's format command to reformat and erase the card
once this is resolved a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card -- I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
LN

Canon SX50 HS viewfinder darkens when outside

Similar Messages

Maybe you are looking for