Canon Vixia HF R400 Stops Recording?

Hello!
For some reason, my Canon HF R400 Camcorder (probably a week old) stops recording in the middle of recordings.
This has happened to me multiple times.
Today, I was recording a Piano cover, and it stopped recording around 2 minutes into it! I didn't even know until I watched it later on.
I tried it again, with the same result.
I read that it could be some sensor overheating, but the cam isn't turning off; It's just stopping the recording. Anyone know why?
Thanks!
Sahil

Same problem here.  After approximately 20minutes of recording it will stop and start a new recording all it's self. 
Any ideas?

Similar Messages

  • How to view what I am recording on my pc - Canon Vixia HF R400

    Hello. I purchased the Canon Vixia HF R400 to record arts & crafts tutorials that will be uploading on YouTube.  I would like to be able use my pc as my screen, as opposed to the the 3.0" LCD Screen on the camcorder.  Is it possible to connect the camera to my PC with some interface software or equipment?
    This is all very new to me and I greatly appreciate any help provided.

    this is some MAJOR BS..HUH?..It's 2015 and she cant plug her camera in to her computer?  I see Canon Adertises LIVE STREAMING through the wifi....How does she stream video live to the computer? or on the HFr50 with wifi if hers doesnt have wifi DOES CAMERA ACCESS HAVE A PC APP OR is there better options for this SOFTWARE????...Does the HFr50 do what she wants??HE SAID WHILE RECORDING. Cant she view what the camera is veiwing  like a webcam through the USB? veiw and record into some capture software? and not record on the camera at all?? How do you get the camera to be recognized as a working video capture device to use it as a webcam??? I was doing this in the over 10 years ago with a consumer sony camcorder. 

  • Canon Vixia HF R400

    I have a new Canon Vixia HF R400 and I am using Premiere Elements 11. When I add video to my timeline the audio plays fine, but my video drags or stops altogether. Any suggestions?

    You've written that you put your video files on an external drive.  You didn't say anything about that drive or how it is attached to your new laptop, but I suspect a major bottleneck.  Your computer may not be able to read those huge files off an external hard drive fast enough for smooth preview.
    Bill,
    This is a very good point, and were I Nancy, one that I would explore.
    There are two prime elements, that will affect video performance, with HDD's (internal or external): the disc's speed (both RPM and transfer speed), and then the connection type. Many externals are 5400 RPM, where at least 7200 RPM is needed for smooth playback. Next, if the connection is either USB 2.0, or FireWire 400 (IEEE-1394a), then the transfer of data will be too slow for really smooth playback, and especially with HD (High Def) material. If the connection is FireWire 800 (IEEE-1394b), it should be OK, and if USB 3.0, or eSATA, it should be good to very good.
    Your computer is also new if it has Win 8 on it.  Windows 8 is new to video editing too.  The combination of Windows 8, PrE11 and editing 35Mbps files is new territory.  You chose a computer with an Intel i5 processor and 6 GB of ram.  I do not mean to be rude, but that is "mid grade" for editing "high grade" video files.  I had a similar laptop with Windows 7.  Doubling the RAM made a huge difference editing 28Mbps video files.  If you are going to do a lot of video editing, you may have to upgrade the RAM.
    An i5 will struggle with HD material w/ the H.264 CODEC, even without that high 35Mbps Bit-Rate, as H.264 takes a lot of CPU power to process. The only way around that is by having a very fast CPU, or more of them.
    With Win7-64, 4GB of RAM is just about enough to run the OS, with almost nothing left over for programs, and especially an intense operation, such as video-editing. Six GB is certainly better, but I have not seen any benchmarks on RAM with Win8, so do not know if it's resources usage is equal to Win7, or perhaps a bit more. I recommend 12 - 16GB RAM as about the minimum for video editing on a 64-bit OS. This will cut back on the OS's need to rely on slower Virtual Memory, when running a program, like PrE.
    Also, with a new computer, unless it was home-built, or built specifically by someone, who knows about video-editing, will have tons of bloatware - programs that might seem neat, but load at bootup, and sap resources, often getting in the way of the utilization of the computer's resources for video-editing.
    Some very useful programs, like real-time scanning anti-virus, anti-malware and anti-anything, can really get in the way, keeping a video-editing program from being able to work, unobstructed. When doing video-editing, I turn all of those off, and just do not have an Internet presence, and do not check my e-mails. I only will do that, after the editing session. When I get a new computer, even if custom built for me, the first thing that I do is remove any utilities, etc., that I will not need to run, from the boot loading with MSCONFIG in the Services, and Startup Tabs. I can still run them, when I need them, but do not want them running in the background. Then, before I start the editing session, I turn OFF Norton, StopZilla, and anything else, that is basically protective, but will not be useful, when I am editing. When done, I turn those back on, or just reboot. I want to diminish the CPU cycles, the RAM access, etc., to the minimum, so that most resources are available for my NLE (Non Linear Editor) program.
    Thank you for taking the time to offer some great tips and observations. Nancy will benefit from those.
    Hunt

  • Canon Vixia HF R400 User Interface Demos

    I also had fun recording (with a SONY that makes autofocus noise!) some GUI of the Canon Vixia HF R400. It's feature-rich (197pg PDF manual). Once you play around with it it makes sense and is fun to use. The Edit icon should be 'Delete' in the Indexes becuse that's all it does. The pen and stamp mode is fun. But it begs the question. It has a feature that allows the toolbar to be hidden like a toggle swutch. Why isn't there one on the main cluttered GUI? Anyway I hope you enjoy my efforts :
    http://www.youtube.com/playlist?list=PL3gpXvdY_KNjuIjAB7zJAntW7F0K7BTA5

    FYIGMO63:  I'm using Linux -- Debian (Squeeze). I don't own a Windows nor a Mac system.
    I've seen mention of other models of camcorders where the user is apparently asked to select their USB mode, but my camcorder doesn't seem to prompt for that.  I poked around the settings menus as well and didn't find any where to specify USB connection mode.
    Just so that I'm looking in the right place, could you give me an example for how you would do that on your camcorder (and what model you have)?
    It would REALLY be nice if a CANON representative could look at this thread and tell me what I might be doing wrong to mount the camcorder as a USB Mass Storage device ... or if it's even possible under Linux.
    I have 6 days left to return it at BestBuy, which I'd like to do if I can confirm that this is not possible for me, as I mentioned above, I have no Windows nor Mac computers here so I would need a generic USB Mass Storage solution that works in Linux.
    Thanks!

  • My computer wont detect my Canon vixia hf r400

    Please Help me. My computer wont detect my Canon vixia hf r400 im running windows 8 and I tried everything from installing the drivers to the USB ports, I have my ports in legacy mode and still wont detect. I have USB 3.0 ports but I can't imagine it not being backwards compatible. What can I do to get my computer to recognize it. It only detects when I have a memory card in the camcorder but that is like just having the card in a SD slot on my computer. No software that come with it will detect it either.

    Put the camera into AVCHD mode before connecting it to the computer.

  • What is the premiere sequence preset for canon vixia hf r400?

    I'm new to the world of editing.  I shot a project on a Canon Vixia HF R400 with all the factory presets.  Is the correct Premiere preset sequence AVCHD 1080i30 (60i)?
    Thanks!

    Yes that is the correct sequence setting.
    Get Started with Premiere Pro
    New to Premiere Pro? Get started with your first project — editing a video. In less than an hour, you'll learn to edit together different types of media to tell a video story.  

  • Canon Vixia HF R400 - USB Mass Storage?

    I recently purchased a Canon Vixia HF R400 and was wondering if there is a way to make the camera appear as a USB mass storage device (like an external hard drive or flash drive).
    When I plugged in the camera using the provided USB cable to a Debian (Squeeze) system, Shotwell Photo Manager appears as an option but it never successfully gets any data.
    I've looked through the manual but found no reference to USB mass storage.  Am I limited to Windows/Mac for accessing the files via USB?  That would sad, as I have neither available to me at home.
    Thanks in advance!

    FYIGMO63:  I'm using Linux -- Debian (Squeeze). I don't own a Windows nor a Mac system.
    I've seen mention of other models of camcorders where the user is apparently asked to select their USB mode, but my camcorder doesn't seem to prompt for that.  I poked around the settings menus as well and didn't find any where to specify USB connection mode.
    Just so that I'm looking in the right place, could you give me an example for how you would do that on your camcorder (and what model you have)?
    It would REALLY be nice if a CANON representative could look at this thread and tell me what I might be doing wrong to mount the camcorder as a USB Mass Storage device ... or if it's even possible under Linux.
    I have 6 days left to return it at BestBuy, which I'd like to do if I can confirm that this is not possible for me, as I mentioned above, I have no Windows nor Mac computers here so I would need a generic USB Mass Storage solution that works in Linux.
    Thanks!

  • Canon Rebel T5i automatically stops recording after about 6 seconds. How can I disable or fix this?

    I just got a Canon Rebel T5i and I was testing out the video and several times it will automatically stop recording after about 6 seconds. How can I fix or disable this?

    And while buying said faster card... buy a REPUTABLE brand from a reputable vendor.  I've come to the conclusion that there are a lot of fly-by-nights making cards that are not as fast as they claim to be.
    Reputable vendors are companies like Sandisk and Lexar.  But as an SD card is just a plastic card with a sticker on it, and stickers are pretty easy to fake, buy the card from a vendor you can trust is not selling fakes. 
    This is one item where it is probably not a good idea to try to save money by finding the cheapest deal you can find on the Internet.
    Tim Campbell
    5D II, 5D III, 60Da

  • Canon 5D Mark iii stopped recording video!

    I was shooting on my new Canon 5d Mark iii yesterday, recording to a 16SD card and using a RODE shotgun mic for sound when a weird image appeared on my live view.  Towards the right of the screen these blocks started piling up.  When there were 4 blocks, my video stopped recording!  I'm talking maybe 10 or 15 second videos here.  My SD was less than half full at the time, and when I hit record again I only got about 10 to 15 seconds more of video recording.  What the heck was going on!?  Please help!
    I've drawn a picture of what the blocks lookied like to further illustrate my point.  Thank you!

    Hello ScottESwartz,
    What you are seeing with this indicator is the amount of data being recorded to the buffer.  Even though you are using a 16GB memory card, if it is a slow card, this indicator will fill quickly and stop.  It makes it seem as though the card you're using doesn't have the speed to keep up with the recording level you have set.  You could test this by selecting a smaller movie recording size and compression method within the Menu.  For example, you may try 640 / 30 frames / IPB and see if this indicator either doesn't appear or fills more slowly.  This tells you that the card isn't simply fast enough to handle large recordings with ease, hence the quick fill up. 
    Another method would be to use a much faster class of card, for shooting full HD video use the highest class of card you can afford.  This would be Class 10 with a high write speed.  This ensures that the buffer in the camera writes to the card quickly, allowing for longer record times. 
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I uploaded Canon VIXIA HF R400 footage at Full HD 1080 35Mbps 60p, 1080 17Mbps, and 720 4Mbps MP4

    I took the time to upload a Playlist of Full HD 35Mbps 60p, Winter Scenes 17Mbps 30p, the horrible Samsung HMX-F90 vs the Canon at 1280x720 4Mbps. So it covers the bases.
    Meanwhile I hope you enjoy my efforts of what this cam can look like:
    https://www.youtube.com/playlist?list=PL3gpXvdY_KNhJnYZbc66Rj7OtzmqhuEYB

    Bluz_Harp wrote:
    … is the ability to record in MP4 an advantage in any way for editing in FCP X? …
    I dare to say: NO.
    I'm lacking the 100%-in-depth-engineer-lingo knowledge, but basicly, mpeg4s main advantage is a less demand of processing power for playback.
    but do you just playback?
    no. you edit.
    and FCPX offers optimized and proxy media to unload your Mac.
    secondly, what I've read so far, h264/'AVCHD' is a much 'better', effective codec. so, in tech terms, a 28mbps AVCHD should offer a better pic than a 28mbpsMP4 ..... (aside all other criteria which affect quality)
    I'm using a Pana707, an anchestor of your choice - a beast!
    I'm in the middle of some editing of a show, my friends asked for a first glimpse, click here.
    most shots you see are done with the Pana, the noised ones are done with a Canon DSLR 650D (wrong settings, the other guy using it had no idea …).
    Before that, I used a Pana FZ38, which offered mpeg4/avchd too - made a few tests (quality control by eye, not by tool): no 'plus' for the intra-frame codec vs. inter-frame codec …
    imho, the really (and only …) important factor for noticeable differences in 'quality' is cinematography, your skills in wisely applied manual settings …
    PS: never mix mpeg4 and AVCHD on one media/SDcard! FCPX can not read such media …

  • Does a Canon VIXIA HF R400 have Firewire capability?

    I'm just wondering so I can use it on a program called iStopmotion for Mac. If it doesnt have it, I'm willing to pay $500 for a camera that does. Thank You!

    The specs found here:
    http://www.usa.canon.com/cusa/consumer/products/camcorders/consumer_camcorders/vixia_hf_r400#Specifi...
    mention high-speed USB but not FireWire.

  • Computer wont detect my Canon vixia hf r400

    I have windows 7 and the computer won't recognize the canon camera. It's in avchd mode and still nothing. I tried it on my laptop also and nothing. I switched out several usb cables and still nothing. What do I need to do? I can only playback on the device.

    Playboyesquiere,
    When connecting the camcorder to a computer via a USB cable, if the camcorder is not recognized by the computer, please check the following points.
    Remove and reconnect the USB cable, and then turn on the camcorder again.
    Connect the USB cable to the computer properly.
    - If there is more than one USB terminal on the computer, try to connect the USB cable to the other USB terminals.
    - Disconnect any USB devices other than the camcorder, keyboard, and mouse.
    - Connect the camcorder and the computer directly with a USB cable. Operation using USB hubs is not guaranteed.
    - If software is running in the background, exit them and connect the camcorder again.
    CAUTION
    When the camcorder is connected to a computer:
    - Do not open the memory card slot cover and do not remove the memory card.
    - Do not access, change or delete any of the camcorders folders or files directly from the computer as this may result in permanent data loss. Always use only the supplied software to save your recordings on the computer and, if necessary, to transfer back previously saved video files to the camcorder.
    Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.
    - Do not open the memory card slot cover.
    - Do not disconnect the USB cable.
    - Do not turn off the camcorder or the computer.
    - Do not change the camcorders operating mode.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Can you output live video through HDMI on Vixia HF R400 without recording?

    I want to connect two camcorders to a HDMI video switcher and output to HD Monitors and to a computer and use capture software such as Adobe Premiere Pro to capture video and sound. Of course, the computer will have a HDMI video capture card.
    Solved!
    Go to Solution.

    No problem. Be warned, though. As far as I know, M series camcorders are only available on secondhand markets right now, and if you happen to find, say, a Vixia HF M500 new and unopened, the after-market price might be a little higher.

  • My canon t3i dslr camera automatically stops recording after about 10 sec. using a class 10 card.

    Hello,
    My canon t3i dslr camera stops recording automatically after about 10 sec. the manual said to use an SD card of class 6 or higher. I am using a class 10 and I have been able to record long videos in the past and all of a sudden the camera stops recording automatically after about 10 sec. Does anyone know why?  thanks

    Hi Rockinruby.
    We get this a lot here.  It turns out that even though the card is labeled as a Class 10 card, the most common problem when this occurs... is that it's still a defective card.
    Sandisk is a good company and they generally make solid products.  But there are two risks... (1) even Sandisk will occasionally have a bad card or a card that fails prematurely, and (2) it's exceptionally easy to create a forgery (if you peel the labels off these cards, they all look identical.)  
    When I buy cards (and I also buy Sandisk and/or Lexar cards), I'm careful to buy cards which well-exceed the specs necessary ... but I'm also careful to buy the cards only from reputable dealers.
    If you do a search, you'll find LOTS of articles about fake cards with tips on how to avoid them or how to spot them.
    But the bottom line ... at the end of the day you just want your problem solved.  If the card is bad, then there's nothing that you  would be able to do to the camera to make the problem away.  You would really need to replace that card.
    The issue that you are having is somewhat common... there are lots of threads on this.  But the majority of these are actually solved simply by replacing the card with a known good card and without making any changes to the camera.  
    It's not a guarantee that it's the card... but it's the most common cause.
    Tim Campbell
    5D II, 5D III, 60Da

  • Final Cut Pro X/Canon Vixia Import Time Different

    Hi,
    I have an annoying issue that I have not been able to figure out. I use a Canon Vixia M41 camera to record family videos in AVCHD. I usually import them directly off the card into Final Cut Pro X by first making an archive to store on another hard drive, and then import the actual clips into the library.
    Everything works fine and seems to have been working fine for a while, but I recently noticed that my import time on all of my clips is off an hour. Now, I first thought, okay, daylight savings time, so I went into my camera and checked the time and date settings. I manually adjust for daylight savings time, so I do not have anything in the camera making the DST change automatically.
    When I looked in the camera, the date and time are perfect. When I look at the clips on the card and click to play them back on the actual camera, the date and time are perfect there too; however, when I import those clips into Final Cut, the time on all of them are off by one hour. They are ahead an hour, so instead of 5 am, it's 6 am.
    I know I can adjust the time in Final Cut, but I would like to know why the time is right on the camera and the clips on the camera, but import wrong when brought into Final Cut. I don't want to have to always check to adjust everything I bring into the application.
    Any ideas? I am willing to test out anything. I have also noticed that it has been doing this for a while now and I didn't notice.
    Thanks!
    Using Final Cut Pro 10.1.1 on 2009 Mac Pro (Nehalem) on OS 10.9.3
    Canon Vixia M41 recording AVCHD

    I've been running FCPX from version 10.0.1 up to the latest, and I spent some time puzzling why the time on imported files from my Panasonic SD700 were always an hour out. I tried several experiments setting the daylight savings on or off and adjusting the set time on the camera but FCPX always got it 1 hour wrong. This was despite the fact that the date/time on the raw video file in Finder was correct.
    In the end I just had to accept that it was always going to be an hour out and either set the camera clock 1 hour back or take a short clip of the time on my phone so I could batch adjust the clips later! I can only assume FCPX gets its time from the metadata in the file structure and that some manufacturers' implementations confuse it!

Maybe you are looking for