Cant able to see V1 Master Oranization in Change Organization window

Hi ,
When i'm trying to change the Organization to V1 it is not displaying in change organization window in Inventory Responsibility.
I checked in Inventory -> Setup -> Organizations -> Organizations -> Vision Operations. The disable date is blank.
So please help me out.
Thanks,
Mahesh

Please do as follows
Inventory --> Setup--> Organization --> Organization Access -->
Org-->V1
Application --> Inventory
Name --> Inventory,Vision Operations(USA)

Similar Messages

I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites.

I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites. I was able to get window open from the help "window" and open sites from there just not from new: window tab or bookmarks those stay invisible? I tried the help suggestions, safemode,etc.

Hi CMorenoOT,
This prompt is usually displayed when your Apple ID needs to be configured for the iTunes Store. You'll want to run through the additional steps to setup your country, and payment information.
iTunes: How to set up an Apple ID within iTunes
http://support.apple.com/kb/HT2731
Tip: If you are trying to create an account using an existing Apple ID, like your iCloud email address, you will receive a prompt telling you that your email address is already an Apple ID. Simply tap Continue, and then tap Use Existing Account on the following screen.
- Next, you'll be required to enter your billing information. To choose a different Credit Card type, tap one of the available options, and then tap Done. You will not be charged until you make a purchase.
- Once you've filled out all of the fields for your billing information, tap Next.
For more information:
Using an existing Apple ID with the iTunes Store and Mac App Store
http://support.apple.com/kb/HT2589
Thanks,
Matt M.

Cant able to see new value and old value for change in purchase order text

Hi all ,
I am not able to see changes done in material's purchase order text in material master. When i use tcode MM04 to see changes done material master it does not report new and old value for change if it is done in purchase order text of that material .
Thanks in advance ,
Shikha

Hi Shikha,
I'm not sure it works or not. But you can try SCU3 t.code and table DBTABLOG. May it can help you out.
I also faced this type of issue in Plant data and it get resolved.
Try and let me know...
Regards
Sunil Sisodia

Hi I cant able to see some web photos in my ipad showing 'unable to load' .. Some photos able to see but still almost 90% I can't ...pls help me to clear this issue ...thanks in advance

Hi
My ipad is not able to see some of the photos .... I can see with google images and all .. When I am loading some applications or safari images getting the same issue ..first it's showing 'loading' then its happens like 'unable to load ' pls help me to solve the issue ..thanks

When you say that you can't find them anywhere, I assume that you mean that you can't find them on the iPad even though the storage figure says that the photos are there.
You can try this. I don't know if this will work for you but this was recently discovered as solution for phantom photos. This was copied from a post started by gail from maine
Delete all of your Recently Deleted photos from your Recently Deleted folder
Then go to Settings>General>Date & Time, and change the date back to last September when iOS 8 came out, and then go back to the Recently Deleted folder. Although at the Album level it will still say "0" if you tap on the Album, you will be greeted by all of the "Recently Deleted" photos that have surpassed the 30 day limit. Mine went back to when I installed iOS 8.
She found this in a post where txforever was the person that discovered how to do this.
More photos in settings than photos app shows

Varaince cant able to see in copa report

Hi,
previously my scenarios is MTO now for one division they have changed it MTS.
i could able to settle prodution order through ko88 during settlement of production order variance is calculated without any error.
i could not able see to these variance in copa report.
and that to variance is coming in ke24 only when i select production order.
during settlement of production order copa douctment is generating sucessfully.
please help if i had missed any configuration.
thanks
kareem

hi,
i have not catch ur points here,
production order selection characteristics means i have selected order characteristic in define segment leval charactersitics
and record type in ke35 from record type to to record type.
when i select production order number in ke24 actual line i could able to see copa report that belong to varaince that which have settled during ko88 of production order.
do i have missed any configuration part please suggest me.
thanks
kareem

I'm not able to see all the tabs words on itunes window. I think I uninstall the font on my system. How I can know wich fonts Itunes uses for install it?

I think I uninstall the font on my system. How I can know wich fonts Itunes uses for install it?
I'm using Win Vista 64b - but I try already to install all my fot library but nothing happen,, still not able to see some menu's from lists, tabs titles, etc.
I search through itune's web site and not sign of info about how can I fix this problem...
help!

It has something to do with Segoe fonts in your system.
Refer this link for solution
iTunes 10.1 Missing Text

Business Content query cant able to see in Bex.

Hi BW Experts,
I have installed the query 0PS_C04_Q1000 from the business Content.After installing, I couldnt find the query in Bex analyzer. But in the business Content the query is showing that it is already installed.
Can u pls help on this issue.
Thanks,
Jelina.

RRMX->Open Queries->do a search giving the query name 0PS_C04_Q1000 in Description/Technical Name area and click ok. If it is installed properly, you should find it here.
Also check table RSRREPDIR if you can see it. If not, re-install the query from BI content again and try.
Hope this helps..

Cant able to calcualte OH on quantity based

HI,
I am not able to calculate overhead on quantity based.
i have made settings like calcualtion base, and Define Quantity-Based Overhead Rates and define credit key.
and assign base and OH liked to credit key in costing sheet.
when i run costing run i cant able to see any OH is calculated
i can able to run with OH % but not Quantity.
do i need make any additional settings apart from this.
thanks
kareem

Hi Ajay ,
thanks for reply.
every setting are are ok.
it is working fine now without any thing.
i hope to update system it has taken time.
i am closing this thread.
thanks
kareem
i

Cant able connect to Facebook Chat

I had connected to facebook 2 days ago from skype and I can also see facebook news feed but cant able to see friend list or chat on skype.
It says reconnect facebook agian and again...
I allowed skype in ma fb account...
Is there anything like change privacy setting that I have to change in Facebook or Skype...??????

I have the same problem "Skype for desktop" wont show facebook friends in the chat menu.

Wf and Wi not able to see for ESS

Hi Gurus,
Am having an issue that wf and WI is not able to see .
The scenario is user filled the leave time sheet thru portal and i cant able to see the status of that as am not able to see the workflow and workitem.
When i run a transaction for that user i see the date created and no workflow is listed .
could u guide me where can i find it and how.
Thanks in advance.
Plato

ws 12300111 is the WF v r using.
But this is for a particular user.
What he has filled thru EP say on dates 10 ,12 is not reflected as workflow and WI.
Thanks

Not able to see the records in master data

Hi friends
My requirement needs the data to be loaded from a RDM table.I created a data source in the R/3 and by using the extracto checker i am able to see the data.I created the info packages one for Attr and other Txt,replicated the datasource and loaded the data.I am able to see the data in the PSA and when i go into monitor in the infopackage it says the data has been loaded and it shows no errors.But I am not able to see this data in the master data info object.Can anyone please help me out???
Mouli

Hi
Check out your infopackage setting: if its upto PSA or to MD table also
Open Master data table in SE11 and check the OBJVERS field wether the MD is activated or not!
Regards
GSK

I purchased a mac book air today. When in store I was able to see all of my music in itunes. Now I am at home I cant see any of my music although i tunes is authorized on the computer. How do I fix this ?

I purchased a mac book air today. When in store I was able to see all of my music in itunes. Now I am at home I cant see any of my music although i tunes is authorized on the computer. How do I fix this ?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Not able to see specific tags for FSCM Credit Management on BP master data screen

Hi All,
I have already set up Collections & Dispute Management,
I am now on my way to start FSCM Credit Management setting up. I have already created the BP role (UKM000) and assigned it for direction customer to BP, but I am not able to see any specific tag on BP Master data related to Credit management, (just as I can see "Collections profile" tag, in reference to Coll. Mngmt).
So, I am not able to see these tags yet: "Credit profile", "Credit worthiness", "Cresit limit and control".....under Credit Management BP role!
What am I missing there? Have I got to activate BAdi UKM_R3_ACTIVATE in order to be able to "see" those BP tags???
....Or what else?
I will reward with points if someone can provide me any hint about this issue.
Thanks a lot.

Hi Pallavi,
Many thanks for your quick response. However, I have not succeeded in seeing that tab.
Let me tell you, I may be confused by a document I downloaded from internet about the BP master data views (as for the FSCM Credit Management role, of course) . Please find below the commented tag. It is an imaged I copy to you from that document I told you, for you to see which tag I am talking about:
I don´t know the content of that tab...but I would like to see it in place....you know..
Now, I checked you last answer and I saw that everything was already set by factory, please find below:
BUS4 view:
BUS5 view:
However, I´m still not able to see the tab I told you at the beginning (first image). Am I confused about something here? Many thanks for your patience (these things happens when you set FSCM Credit Management for the first time).
Is that tag accesible?
Many thanks!
Wilson

Master Data Loaded but not able to see.

Loaded master data successfully. Able to see it in P and M table, but not able to see when going thru Manage - Contents at InfoProvider level.
Many requests are available showing number of records Transferred and Updated.
What could be the possible reason?

Hi Sarabjit,
Welcome to SDN!!
You need to load the transaction data into the Info-provider to see the contents and not just the master data.
In case you have done the transaction load then you need to do the "apply hier/attr change" for the master data loaded. Goto RSA1 -> Tools(menu) -> apply hier/attr change -> Seelect your info-object and execute.
Bye
Dinesh

I have the following problem: i lost my cs6 Adobe Production Premium installer dvds and the serials within the package, after all i logged here into adobe and cant find any product in my profile, so i am not able to see my serials or my installations i ha

i have the following problem: i lost my cs6 Adobe Production Premium installer dvds and the serials within the package, after all i logged here into adobe and cant find any product in my profile, so i am not able to see my serials or my installations i have on my macbookpro. Can you help me to find out where i am registerd?

If your registrations do not show at https://www.adobe.com/account.html you will not get help in an open forum
You MAY get help at Contact Customer Care
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Cant able to see V1 Master Oranization in Change Organization window

Similar Messages

Maybe you are looking for