Cant get into Bios, New board (K8T Neo-FIS2R)

I just put in a new board and cpu, everything seems to start up fine. BUT I press DEL to get into the bios settings and it tells me theres no bios installed. My HDs wont autodetect at the start so i havent gotten to windows yet, HD taken from old pc with winxp on it already.
Im totally lost here as what to do.
Can i just DL the newest bios drivers and flash?

Quote
no bios installed
...that's the Promise controller...you have to press Delete when you first power on, you're probably missing the timing because of the Core Cell screen...
...you don't want to flash the BIOS until you get a stable system...well, you could, but...  

Similar Messages

  • Unknown Processor Revison & Cant get into bios! RS482M4

    Similair to problem to another post but have tried what was suggested.
    This is my first attempt at an AMD system and I've hit a dead end on the first switch on...
    AMD Athlon 64 3700+
    MSI RS482M4 Motherboard
    1GB RAM
    WD 1600AB H/Drive
    Sony CD-RW
    When I power on I get the bios screen with the M/B details (RS482M4 A7019AMS V1.1) and processor details (AMD Athlon 64 Processor 3700+DRAM Clocking = 400 MHz).
    It then goes a little further, initialises USB drivers, mememore HD and CDRom then states:
    CMOS Settings Wrong
    CMOS Date/Time Not Set
    ****Warning: Unknown Processor Revision ****
    The processor installed on your system is of an unknown revision. Please contact your BIOS vendor for appropriate upadates. 
    Fatal Error ... System Halted.
    I have tried resettng the CMOS but as I cant get into the BIOS I cant update it and feel like I've been going round in circles for the last 5 hours!
    Any ideas?

    Bios version is V1.1 and PC doesnt boot to anything - doesnt get beyond saying 'Unknown Processor Revision' to even allow you into the bios to try updating it.
    I have also tried asking on the MSI online support but as yet with no reply.  Its really annoying me as the motherboard has all the things I need and don't want to have to go and buy another one (have tried the CPU & memory in another machine and all worked fine).

  • Cant get into BIOS via DEL key, screen goes blank on load RD240

    Hello group, having an issue with a RD240 rackmount server attempting to bring it online for the first time. Currently in a one CPU configuration with one stick on RAM in the correct slot, using SAS. When the computer first boots prompting you to hit either DEL or TAB those keyboard commands are non-effective. Once it bypasses that screen it will move towards the LSI connfiguration utility. If you hit Ctrl +C it will say that the utility will become active after initialization. The screen then  just goes blank. At that point I can hit Ctrl Alt Delete and it will reboot the server and then in the same mess again, Del is ignored, I can't boot off the CDROM, cleared the BIOS using the jumpers, nada. Any thoughts on this would be great, at this point I can't get in to configure and if I just let it boot always ends in a black screen. Checked the cables for the SAS and everything looks good across the board to me. Tried different RAM sticks, unplugging the SATA CDROM, etc. I can get into the Mgmt via the web and sensor show everything green across the board etc but something is borked. There is a LED screen on the mainboard with the number 78. I couldn't reference what that means. All drives I can hear click on, Cheetah 15k all around. Steady green light on bottom, top light out. Any input would be greatly appreciated!

    Try pressing F1 at the Thinkserver Screen. When Setup Bios appears, you can exit out by pressing Esc.  After the screen goes blank, press Ctrl+H to get the Web Bios screen which will allow you to configure your server.  I hope that this will help.

  • Cant get into bios after P965 NEO MB change..pls help

    hi all, i just changed to the MSI P965 NEO, when i power up, all i get is the MSI start up utility asking me to press either "tab" or " del" , i pressed but nothing happens..
    Can someone please help me out?..thanks

    Quote from: accuwipe on 02-December-06, 23:34:15
    alrite alrite...here it goes.
    Model   RS-380-PMAR (Non-PFC (Regular))
    RS-380-PMAP (Passive PFC)
    Type   ATX Form Factor 12V V2.01
    Input Voltage   90~140V / 180~265V (Selectable)
    Input Current   8A @ 115Vac / 5A @ 230Vac
    Input Frequency Range   47 ~ 63 Hz
    Fan   Sleeve bearing 120mm fan
    Power Good Signal   100 ~ 500 ms
    Hold Up Time   > 17 ms
    Efficiency   > 70% typically
    MTBF   >100,000 hrs
    Protection   OVP / OCP / OPP / Short Circuit Protection
    Dimension   Standard ATX 150 x 140 x 86 (mm)
    Operation Temperature   0~40?
    Safety   Nemko / TUV / cUL / CE / BSMI / FCC
    whats needed
    < name brand >
    +12v1 = ?
    +12v2 = ?
    +5v    = ?
    +3.3v = ?
    if your psu doesnt have 12v 1&2 then list the +12v = ?
    theres your problem, no futher testing till your power supply has been replaced!
    24 to 30 amps on a SINGLE 12v rail power supply needed, and name brand / not generic.

  • K8T Neo-FIS2R and 2.2 bios problem

    I flashed the bios of my K8T Neo-FIS2R to version 2.2.
    Everytime I boot the system, I can just see the Windows XP logo appearing for a second, then the system reboots again.
    I reflashed from a floppy to version 2.1 again, but still the same problem.
    My HDD is a Western Digital SATA drive on the VIA controller.
    Can somebody please help me out?
    THX!
    Marco

    Thanks for your support!
    After reflashing to 2.0 I still had the same problem.
    The bios was not causing the problem. In some way, Windows couldn't load the SATA driver properly, I think.
    I removed the SATA HDD from the VIA controller and connected it to the Promise controller, and surprisingly, Windows started again.
    The HDD LED works on the Promise, but not on the VIA, so I left the HDD on the Promise controller. The LED problem is now solved as well.
    I still don't know exactly what was going on. Anyway, it wasn't MSI or the new bios, it was Microsoft...
    Marco

  • K8T Neo-FIS2R Disable Overclocking Completely!

    ok so this is really startin to pee me off
    ive got the latest BIOS for my K8T Neo-FIS2R (2.22 i think it is) and it seems to have no way to turn off the Dynamic Overclocking Technology (DOT) crap.
    I have disabled cool n quiet, spread specturm and dynamic overclocking yet when my computer loads i have core centre loaded at startup, when i fire off a heavy app (something java'ish usually does the trick) the processor speed whacks itself up to anywhere from 3000-8000mhz and then drops back down to the lovely 2200mhz which it should be running at (its and Athlon64 3400+ chip) problem being i dont want it to do this - i want a stable system and this is causing me major headaches as there are short periods where it seems to almost freeze as the processor is changing from one speed to another
    anyone any ideas on how to totally disable DOT before i ditch it and go back to a P4
    thanks
    ste

    Check your BIOS revision with live update or watch the screen on boot up.  Are you really using 2.22 or 2.18?  If you are, try a BIOS version that isn't beta.  Beta versions all end with a digit in the hundredths place, you should go for 2.0 as the jury is still out on 2.1 and 2.2.  Get it here  I'm currently stable at 1.9.  Also, I'm still using Corecenter v1.6.0.0.  I found that all of the newer ones (as of 6 months ago) caused a hiccup on speed changes and actually caused a little performance hit.  If you want the old version of Corecenter I have, PM me and I'll email it to you if you can't find it elsewhere.

  • I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?

    I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?

    I'm having a very similar problem.
    I'm based in the U.K. and am trying to publish an iBook through the iTunes bookstore. I have made my book in iBooks author 2.0. My iTunes is up to date.
    When I try and publish the iBook I have passed and ticked the Pre Publish Check; and the Create Account, but when I try and download iTunes Producer through iTunes Connect I'm told "Your Apple ID does not have permission to access iTunes Content."
    When I try and re-set my iTunes Store account I'm told "The iTunes Store Account has already applied to distribute content on the iBookstore." Of course it has I just did that.
    If I try and sign in to iTunes Connect through the Publishing pane I'm told "Your ID or Password was entered incorrectly." Even though I've just used it to sign into iTunes (and here), so my password and Apple ID work fine elsewhere.
    Is my access to the iTunes Connect being delayed while my submission is processed, i.e. the processing of my tax and account details? Or am I stuck in a loop?
    If this is still processing (I started this 20 hours ago) I assume that I have to submit the book itself when I can download iTunes Producer at a later date, as I haven't submitted the book yet?
    I emailed the problem to iTunes Store and was refered to [email protected], only for them to say they don't read or reply to emails sent to that address??????
    I'm not sure which part of the process I've reached - if any. I feel I'm in limbo. I have an iBook ready to go - but where is Apple?
    Any help would be most welcome.
    Andy

  • The computer with my original itunes account and all my music crashed and i cant get into it at all. how do i get my old music onto my new computer?

    The computer I started my itunes account on crashed. I would like to put all my old  music onto my new computer but I cant get into the old computer to import. Is there anyway to get my old music another way?

    Welcome to the Apple Community.
    Pis your content purchased, do you have a back up.

  • New K8T Neo FIS2R won't post

    I have looked at all the other threads in this forum, but can't find the solution.
    Specs:
    New K8T Neo FIS2R
    New A64 3000+
    New Mushkin 3500 Level One (Cas 2) 2x512MB
    New Antec 550 (24A on the 12V)
    ATI Radeon 9800 Pro
    When I give it power, all the fans come on, the 4 LEDs on the bracket stay lit up, and then don't change, but I get no video or any other indications (such as beeps).  The 4-Pin power connector, is securely connected in the proper location.  The standard ATX connector is also secure.  I'd link to a picture to prove it, but my camera is charging right now.  
    Currently I have only power wires, power switch, system speaker, video card, and 1 stick of RAM in the first slot.  I have tried it without the video card, without RAM, with RAM in different slots, just about any combination I can think of.  I have even cleared the CMOS a few times.  Nothing changes, I always get stuck with the 4 LEDs.  I don't have anything connected to the USB headers either (that was mentioned in another post).  
    I know some people have mentioned that the Antec 550's 24A on the 12V isn't great, but it should be more than enough amps, the way my system is setup right now.

    Hi
    It does not sound like a major prob,  it sounds like a PSU or memory problem, anyway of checking MOBO with another PSU with at least 20A on the 12v. Also check the memory sticky at top of the posts and see if your OK memory wise, another possibility is that one of the mounting screws is tracking from the board - try removing screws and see if it boots, also check none of the cables are touching the case or MOBO.
    MOBO and CPU seem fairly resilent, so faulty parts are not to likely, although one never knows.  Another thought the Jbat1 Cmos jumper is on pins 1 & 2, 1 is marked on board, and you could try clearing CMOS. a corrupted bios could also cause this.
    Best of luck, lets know how you go
    Jocko
    PS.  looking at the stickys at top, Bas has put one there about a compitition by MSI, one of the questions is about Radeons needing extra power( has an April 1st entry date!!), it is worth checking, does your Radeon have its own supply, you could always remove it and see if it boots.
    Cheers

  • K8T NEO-FIS2R goes into suspend. Lose display.

    First, here is my setup.
    [list=a]
    MB: K8T NEO-FIS2R
    CPU: AMD 64 3200+ 1MB L2 Cache
    CPU Fan: Thermaltake Venus 12
    RAM: TWINX1024-3200LLPT (2x512Mb DDR400 - Corsair XMS Extreme - Cas Latency: 2-3-2-6 T1)
    HD: 6Y120M0 - SATA Maxtor 120GB (plugged on SER1 not the one from Promise)
    DVD-RW & Floppy
    video card: ASUS nVIDIA GeForce FX5700 - 8X AGP - 256MB DDR - Core Speed 425MHz
    Power Supply: Turbolink 350W - +3.3V/24A - +5V/35A - +12V/12A[/list=a]
    And of course I have 5 case fans w/ led, the UV light, etc... etc...
    Now here is my problem:
    When I power up for the first time, my display is kind of crappy (some small lines etc...). I managed to get to the bios etc... after a while the system goes into suspend (Power LED blinking). Can't turn it back on unless I turn off/on the PSU.
    When I switch my video card to a ATI Rage 128Mb (my old computer). The picture is good but the system still goes into suspend mode (Power LED blinking).
    Also the other weird thing with my 256MB video card, when the system goes into suspend after that I bring it backup, my display is gone, when I switch to my 128MB video card and back to the 256 I get the display back.
    I suspect that my PSU is too weak but instead of spending more money on this system I wanted to double check with you guys.
    Also, before anybody asks me. Yes, I plugged in the 4-pin 12V connector into the MB.  
    TZ
    EDITED: There was a typo on the +12V of the PSU The correct value is 12A as listed on the PSU. Sorry about that.

    Jocko>
    new PSU -> Enermax 550W (EG651P-VE(FMA), beautifull by the way, feel the power )
    Yes 4 pin 12V for connector plugged in
    Yes 3 pin power fan connected in pwr_fan connector
    Yes still shutdown w/ green light laughing at me.......
    No Thermal paste, using a thermal pad, new. Volcano heatsink/fan, running, have a dial on PCI mount place turned to max. According to bios fan running at 5300 rpm. According to bios, CPU temp is 96°F. Should I switch to thermal paste? (I don't really want to butter the CPU if I need to return it... who knows... will check tomorrow anyway...)
    video card1: ASUS nVIDIA GeForce FX5700 - 8X AGP - 256MB DDR - Core Speed 425MHz
    video card2: ATI Rage 128Mb (don't know model # or anything, I'm not at the office right now....)
    video card1: no display when hard drive/DVD/floppy plugged in
    video card2: display ok
    both video cards have fans and they are both spinnin'
    =====================================================
    southmike>
    [list=1]
    ground myself and touch the case everytime.
    yes, and removes easily and goes back in easily.
    nope everything is cool, nothing got bent pushed or anything
    all new came with the heatsink, but might switch to thermal paste now....  ndicator wire pluggin in cpufan1, fan speed crontroled by dial which is set at the max now.
    the stix i have right now are corsair twinx. but I also tried with 1 stick kingston value pc2700(?)(DDR333)
    didn't do only power switch & power led only, will do tomorrow and let you know.
    yes
    yes
    pin 1 faces where it should (used floppy drive to flash bios already)
    no, 1 DVD set as CS at the end of cable, 1 SATA Maxtor 120GB on SATA1 (the one that's not from promise)
    yes
    yes
    no right now I took the MB out to exclude shorts
    yes, tried also w/o the d-bracket[/list=1]
    CPU is immaculate. will put thermal paste instead of the pad tomorrow (now, i'm starting to think that the thermal pad is not thick enough to contact the CPU and the heatsink, but geez, hard to believe... anyway, worth a try)
    no loose wires
    heatsink secure (actually I love this new system with the locking thing   )
    I think that the kingston value is used by other users, and the twinx corsair DDR400 is used also if settings changed in bios (which I tried also), but I don't think it would 'cause a shutdown though, specially if the computer does nothing but seat and be on.
    Yes different video card, but my ASUS 256Mb doesn't have its own power supply, checked five times, and fan spins when mb powered up
    No, right now hard drive and DVD drive are not plugged in until my system stays up (no need to fry them)
    d-bracket lights: 4 green lights when booting on floppy (even when getting to looking for booting device)
    Didn't try different wall outlet but used this one already to run several computers, should I try another one?
    Nope never, before I put my fingers in, I turn off the computer, switch the PSU off, unplug the power cord from the PSU, and make sure to hear the little buzz sound when power unloads.

  • K8T Neo-FIS2R Old Problem, New Issue

    I made my system back in 2003 using a K8T Neo-FIS2R motherboard and a Barracuda 7200 SATA 160GB drive (ST3160023AS). If you don't remember, back then motherboards that supported SATA drives for main drives, sometimes needed extra drivers in order for the windows installation process to work. At first this threw me, but since then I have reformatted my drive a few times using the same disk with no issues.
    5 years of file sharing can do a number on your harddrives, and it seems my Barracuda has finally died. It came time to replace my drive with a Western Digital Caviar 320GB drive SE16 (WD3200AAKS). I did not predict there would be any issue with replacing my SATA drive. I have another 500GB drive connected to my system used for only storage and the computer recognized it at once.
    So I formatted my WD HD, to NTFS and made it active. Then I installed it in my computer disconnecting my other 500GB drive. I ran windows installation with my Windows CD (which I have used many times and I keep it in pristine condition).
    I found that after I hit F6, and it gave me a selection of SATA drivers to use (used xp), it did not not see that drive was there when asking which drive to format (I repeated this many times).  I set about making a new SATA boot disk thinking that my pre-used one had gone bad.
    http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=565
    VIA VT8237(R) SATA RAID Driver (For floppy driver)
    I followed the disk directions having already done it before. When I tried to install with my new drivers, I got this error.
    "File\I386\NT5\viamraid.sys caused an unexpected error (4096) at line 2108 in d:\xpclient\base\boot\setup\oemdisk.c."
    Now i KNOW my windows instillation CD is good, but just in case I used another windows CD and got the same error.
    The only idea I can come up with is that I upgraded the bios to much and now it is having issues. My bios version is:
    AMIBIOS A6702VMS V2.2 030405
    SATA378 TX2plus(tm) Bios Version 1.00.103026
    Does anyone have any ideas of what I can try? I have done all the easy stuff I could think off like try different cables, and plug in my SATA to the second sata port and not the first. I have run out of ideas.
    The only list thing I could try was connecting my sata drive to the computer using a SATA to USB adapter, and finding the partition in windows through that way. For some weird reason windows will see USBs in the computer but not installed Sata drives. I am thinking I will install windows using the USB device and then try plugging in the drive directly. I have no idea if it will work.
    Any help would be greatly appreciated.
    Sombrenote

    Quote from: sombernote on 11-July-08, 09:15:36
    Thank you so much for your help.
    I tried your two versions of your drivers, "VIA PIDE&SATA RAID.rar" "Promise 20378 S-ATA RAID.rar" neither of them worked well (I selected the "VIA RAID Controller(Windows XP"). I received a slightly different version of the last error "File\I386\NT5\viamraid.sys caused an unexpected error (4096) at line 2108 in d:\xpclient\base\boot\setup\oemdisk.c."
    The (4096) was a different number.
    I had used 4 different (yet old) disks, trying to get it to work. None of them did so until i tried it once more. This last time worked, it saw and used the drivers. I was able to get into the disk selection screen, and set to format the disk. As it started formatting (Quick), windows said that there was something wrong with the "Disk or CD". It then asked for me to install the SATA combo drivers. I let it detect the drivers I was using, and it kept saying something was wrong. I tried it 3 more times, and the last time it held and copied the files from the CD, to start windows.
    It is obvious to me that I have either a bad disk, CD, Disk drive, or CD drive. This is quite possiblly my last format before I make my new computer. Thank you very much for your help. I would have had to start my voodoo magic tricks to get it to work.
    Crappy floppy cause that
    Happend to me many times as well, when you receive the error take out diskette and re-insert it, then load drivers again until works.
    Of course simple solution is just replace the floppy drive to avoid "voodoo magic tricks"
    Or best solution do a slipstream XP installation and integrate the drivers which you need in XP installation.
    >>> Slipstreaming Windows XP Service Pack 2 and Create Bootable CD<<<
    >>> Slipstreamed Windows XP CD Using SP2<<<
    "Thank you very much for your help. I would have had to start my voodoo magic tricks to get it to work."
    You are done well

  • [Athlon64] MSI K8T Neo FIS2R BIOS Update when? CnQ no workie!

    The MSI K8T Neo FIS2R (MS-6702) hasn't had a BIOS update since 3-4-2005!
    I put a Sempron 64 3000+ in my motherboard, and was very disappointed that it is recognized as an "AMD Unknown Processor".  Sure, it works, but one of the reasons I bought it is in the hopes of getting AMD Cool n Quiet to work.  However, apparently the AMD driver can't recognize the CPU due to the old BIOS on the motherboard.
    Every other MSI skt 754 board supports Sempron E6 revision already.  Why not the K8T Neo FIS2R?  Where have all the MSI BIOS programmers gone?  I have been waiting 2-months for a BIOS update to support the E6 Semprons.  I have asked and begged MSI Tech Support.  I am tempted to switch to ASUS or some other company that is actually timely with BIOS updates.  Only reason I haven't yet, is this board is everything I want EXCEPT for Cool n Quiet not working.  It's starting to look like there is no BIOS update in sight, so I am very disappointed.
    Anyone here work for MSI can confirm there are no plans for a BIOS update?  Because I don't want to wait around for something that's not going to happen.

    Sorry, I didn't mean to imply I thought the mods here are MSI staff... I was just kind of hoping there's MSI staff lurking here, seeing what people think of their products or seeing what people complain about.
    No, pretty much C 'n Q is the only reason I'm disappointed, but it was something I was really set on getting to work since this is a server that's up 24/7, but isn't utilized but maybe 4hrs out of a given day.  I could reduce frequency and voltage, but unlike C 'n Q, it won't automatically increase speed and voltage based on demand - which is something I want since although it's a server, I also use it as a regular PC as well.
    I've even tried the 2.33 beta BIOS with no change, and even found a 5.52 BIOS in their BIOS testing directory.  I guess that BIOS was for a different kind of 6702, although I had pulled out the peripheral modules with AMI's MMTOOL and they looked the same as the existing BIOS, but that BIOS killed my motherboard so it couldn't have been for a regular 6702.  I had to desolder the BIOS chip with a heat gun, reprogram the old BIOS back on it with an EPROM programmer, and solder in a socket.  I guess that shows my dedication to get C 'n Q working!

  • K8T Neo FIS2R not getting through POST

    I hope some of you might be able to help me.  I just finished building a new system using the K8T Neo FIS2R motherboard.  I actually had everything working with XP installed, but this morning, I have not booted once.  It's not clearing POST anymore.  
    I get a long beep followed by 8 short beeps.  According to the BIOS beep codes I've seen in other posts, that has something to do with the BIOS checksum error.  I did upgrade the BIOS to 1.7 from an MSI Live Update download.
    I'm basically stuck, is the mobo dead?
    K8T Neo FIS2R
    AMD Athlon 64 3000+
    2 512MB Kingston Memory Modules
    MSI ATI Radeon 9800 Pro 128MB
    Power Supply :
    +3.3 / 32A, +5 / 40A, +12 / 24A, -12 / 1.0A,-5 / .5A, +5SB / 2A
    If you need more info, just reply.
    Thanks,
    -Erik

    kawasakiguy37 and others
    This does not bode well for my current situation, or yours.  I have to believe that there are many people out there that have a successful 1.7 BIOS running.
    But I'm beginning to lead in this direction now, especially since your description is close to mine.  I was able to run in v1.7 for a short time, then it just died.
    Also, I don't know if this helps, but after my beep codes, I assume the POST continues, because about 15 seconds later there is 2 short beep following by 1 long beep and the D-bracket is has green all around minus number 4 which is read.  Assume blue=green here :
    This is "Testing RTC (Real Time Clock)".  At this stage it just stops.
    I am assuming that I can flash my BIOS using the cntrl-home method, however, if that fails, are we looking at RMA here...   And if so, what are peoples experiences with RMA'ing with an online dealer?  How much proof will I need to go through?
    Also, by the way, these forums are awesome... The data here has been great.  It's nice to see such a great forum that has valuable information.
    Thanks to everyone for the help so far.
    -Erik

  • How to get into BIOS in Windows 8

    my question is this will the same fan control software that was on windows seven 64 bit lenova work with windows 8 and 8.1 just wondering if i have to uninstall before i upgrade or will it be compatable with 8 and 8.1 upgrade hope someone can steer me in the right direction here it would be appreciated-thanks

    Hi,
    follow the links below:
    http://forums.lenovo.com/t5/Windows-8-and-8-1-Know​ledge-Base/How-to-get-into-BIOS-in-Windows-8/ta-p/​...
    http://support.lenovo.com/en_US/detail.page?DocID=​HT076607
    win8 should be installed on the big HDD.
    If you have enough computing skills Win8.1 Update could be installed on the small SSD using the new feature - WimBOOT.
    x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
    x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
    Do it well, worse becomes itself
    Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

  • I cant get into my ipod, it keeps saying connect to itunes, but it cant unlock my phone. Please help..

    I cant get into my Ipod. It keeps saing "connect to Itunes" Please help..

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

Maybe you are looking for